NZR WW class

NZR WW class

WW 644 as preserved on the Glenbrook Vintage Railway.
Type and origin
Power type Steam
Designer A. L. Beattie
Builder NZGR Hillside Workshops (50), Hutt Workshops (14)
Build date 1913-1919
Total produced 50 built new, 14 rebuilt from WG class at Hutt Workshops
Rebuilder NZR Hutt Workshops, Hillside Workshops
Rebuild date 1940-42,1950-60
Number rebuilt 14 (from WG class), 12 (from WW class)
Specifications
Configuration 4-6-4T
Gauge 3 ft 6 in (1,067 mm)
Driver diameter 45 in (1.143 m)
Wheelbase 29 ft 7.5 in (9.03 m)
Length 36 ft 11.5 in (11.26 m)
Adhesive weight 29.7 long tons (30.2 t; 33.3 short tons)
Loco weight 51.5 long tons (52.3 tonnes; 57.7 short tons)
Fuel type Coal
Fuel capacity 2 tons
Water cap 1,370 imp gal (6,200 L)
Firebox:
  Firegrate area
16.9 sq ft (1.57 m2)
Boiler pressure 180 lbf/in2 (1,241 kPa)
Heating surface 526 sq ft (48.9 m2)
Superheater NZR
Cylinders Two, outside
Cylinder size 15.5 in × 22 in (394 mm × 559 mm)
Valve gear Walschaerts
Valve type Slide valves (WW 565), piston valves (all locomotives)
Train brakes Westinghouse compressed air
Performance figures
Tractive effort 16,910 lbf (75.22 kN)
Career
Operators NZR
Number in class 51
Numbers 131, 449, 479-482, 486, 488-496, 556-561, 562 (later 667), 563-575, 638-647, 668-685
Nicknames "Bobtails"
Locale All of New Zealand
Delivered 1913
Withdrawn 1969
Preserved 4
Disposition Withdrawn, four preserved

The NZR WW class was a class of 4-6-4T tank locomotives that operated on the New Zealand national railway network. They were the final development of the six coupled tank engine in New Zealand, the penultimate class of tank locomotives to be built for NZR, and the first class of tank locomotives to be built with superheaters.

Introduction

The WW class were based on the earlier WG class 4-6-4T tank locomotives, but with a reduced boiler pressure of 180psi and larger cylinders. The initial batch comprising locomotives WW 556-575 were built at Hillside Workshops in 1913, and initially carried the WG classification before being reclassified as the WW class, the 'W' indicating that these locomotives were intended for suburban work in Wellington.

Following the success of the first twenty locomotives, Hillside delivered a further thirty locomotives which were classified WW from new. A further fourteen locomotives were rebuilt from the WG class at Hutt Workshops in two batches between 1940–42 and 1950-52.[1]
Although most of the class were built with piston valves, WW 565 was delivered with slide valves, which were not suited to superheated steam, leading to their replacement with standard piston valves.

In service

The WW class proved to be extremely versatile in service, being capable of handling almost any task. Initially both Auckland and Wellington received allocations of these locomotives which were used in suburban passenger service and occasionally on goods work; later allocations saw engines of this class allocated to the West Coast at Westport and Greymouth. Here, the locomotives worked mostly on coal trains and occasionally hauled branch line passenger services.

During the early 1950s, the decision was made to fit new higher-pitched boilers with deeper fireboxes to four WG class locomotives, Nos. 479, 480, 486 and 488, as a trial when they were rebuilt to WW class specifications. This required a new type of smokebox saddle, cab and enlarged coal bunker. This alteration was deemed to be successful; rather than rebuild the remaining six WG's due to the poor condition of their frames, NZR decided to rebuild twelve existing WW class locomotives, Nos. 571, 573-575, 644, 669, 672, 678-680, 683-684.

During the early 1960s, several of the WW class locomotives transferred from the North Island to Greymouth were altered to operate on the Rewanui Incline by the provision of 'trap-door' cowcatchers to clear the centre rail and additional air reservoirs on the tops of the side tanks. Following the removal of the centre rail in 1966, the locomotives' extra reservoirs were removed and the original brake pump was replaced by two larger pumps, one on each side of the smokebox.[2]

Withdrawal

The first member of the WW class to be withdrawn was WW 491, which was withdrawn in August 1955 for use as a sectionalised aid for apprentice training at Otahuhu Workshops. A further forty-three locomotives were withdrawn by the first half of the 1960s, by which time the remaining twenty-one locomotives were in service in Auckland and on the West Coast. Further withdrawals were at a slower pace, with a final seven locomotives still in service on the West Coast at the start of 1969.[3]

Preservation

Four WW class locomotives have been preserved, all in the North Island. Three were rebuilt with higher-pitched boilers while the fourth retains its original low-pitched boiler:

In addition, Steam Incorporated also owned an original low-pitched WW boiler which had originally been fitted to WW 646. This boiler was purchased from industrial use at the Ford Motor Company plant in the Hutt Valley in the 1970s, and was stored at Paekakariki until early 2015 when it was sold to MOTAT to aid the future restoration of WW 491.

References

  1. Sean Millar, The NZR Steam Locomotive, NZR&LS 2011, p. 304.
  2. Millar, pp. 305-06.
  3. Millar, p. 305.
  4. http://www.nzrsr.co.nz/view_page.php?page=3&search=false&sort=none&order=none
  5. http://www.trainweb.org/nzsteam/ww_reg.htm

Further reading

This article is issued from Wikipedia - version of the Saturday, September 12, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.