Ninja (Six Flags Over Georgia)
| Ninja | |
|---|---|
_02.jpg) | |
| Six Flags Over Georgia | |
| Coordinates | 33°45′56″N 84°33′01″W / 33.765673°N 84.550308°WCoordinates: 33°45′56″N 84°33′01″W / 33.765673°N 84.550308°W |
| Status | Under Refurbishment |
| Opening date | March 1, 1992 |
| General statistics | |
| Type | Steel |
| Manufacturer | Vekoma |
| Model | MK-1200 (Custom) |
| Track layout | steel twister |
| Lift/launch system | Chain lift hill |
| Height | 122 ft (37 m) |
| Drop | 109 ft (33 m) |
| Length | 2,742 ft (836 m) |
| Speed | 52 mph (84 km/h) |
| Inversions | 5 |
| Duration | 1:20 |
| Max vertical angle | 48° |
| Capacity | 1300 riders per hour |
| G-force | 4.0 |
| Height restriction | 48 in (122 cm) |
| Trains | 7 cars. Riders are arranged 2 across in 2 rows for a total of 28 riders per train. |
 Flash Pass Available | |
|
Ninja at RCDB Pictures of Ninja at RCDB | |
Ninja is a steel roller coaster located at Six Flags Over Georgia. Designed by Vekoma, Ninja was originally built for Conko's Party Pier in New Jersey, where it was known as Kamikaze. It was relocated to Six Flags Over Georgia in 1992 and was the tallest roller coaster in the park at that time.
History
Kamikaze was installed at Conko's Party Pier in Wildwood, New Jersey in 1989.[1] The roller coaster was purchased by Six Flags and relocated to Six Flags Over Georgia, where it was given the new name Ninja. Ninja was placed in the park's Cotton States section and sits roughly where Z-Force was previously located prior to its removal after the 1990 season. In the movie Vacation from 2015 this coaster is called Velociraptor.
Track layout
Ninja uses two 28-passenger trains, each with seven cars carrying four passengers in two rows of two seats. Riders are held in place using over-the-shoulder restraints. As Ninja departs the station, it turns to the right, dropping slightly before another right turn to start up the 122-foot-tall lift hill. Upon cresting the lift, the roller coaster dives downward to the right before swooping up into the first major element, a two-inversion butterfly. Exiting the butterfly, the train enters a wide-radius 270-degree curve to the left, setting up the third inversion, a reverse sidewinder.
Ninja climbs a gentle slope before making a U-turn to the left and entering its final element, a double corkscrew. After completing the final inversion, the train banks to the left and passes very close to the station and under the reverse sidewinder, then turns right prior to entering the main brake run. The train exits the brakes and makes a final U-turn to the right to set up the return to the station.
References
- ↑ "Kamikaze (Dinosaur Beach)". RCDB.com. Retrieved 2011-08-12.
| ||||||||||||||||||