PRR D6

PRR D6

PRR D6 #317 in its builders' portrait
Type and origin
Power type Steam
Designer Theodore N. Ely
Builder PRR Altoona Works[1]
Build date 1881–1883[1]
Total produced 19[1]
Specifications
Configuration 4-4-0
UIC class 2′B
Gauge 4 ft 8 12 in (1,435 mm)
Leading dia 33 in (838 mm)[2]
Driver diameter 78 in (1,981 mm)[2]
Wheelbase 22 ft 8 12 in (6.92 m)[2]
Length 58 ft 0.3 in (17.69 m)[2]
Height 15 ft 0 in (4.57 m)[2]
Axle load 32,900 lb (14.9 tonnes)[2]
Adhesive weight 58,800 lb (26.7 tonnes)[2]
Loco weight 96,700 lb (43.9 tonnes)[2]
Loco & tender weight 153,000 lb (69.4 tonnes)[2]
Fuel type Soft coal
Fuel capacity 12,000 lb (5.4 tonnes)[2]
Water cap 2,400 US gal (9,100 l; 2,000 imp gal)[2]
Firebox:
  Firegrate area
34.76 sq ft (3.23 m2)[2]
Boiler pressure 140 lbf/in2 (970 kPa)[2]
Heating surface 1,240 sq ft (115.20 m2)[2]
  Tubes 1,085 sq ft (100.80 m2)[2]
  Firebox 155 sq ft (14.40 m2)[2]
Cylinders 2
Cylinder size 18 in × 24 in (460 mm × 610 mm)[3]
Valve gear Stephenson
Performance figures
Tractive effort 11,170 lbf (49.69 kN) (D6)
12,800 lbf (56.94 kN) (D6a)
Factor of adh 5.3 (D6) 4.6 (D6a)

Class D6 (formerly Class K, pre-1895) on the Pennsylvania Railroad was a class of 4-4-0 steam locomotive.[3] Nineteen were built by the PRR's Altoona Works between 1881–1883. They were equipped with 78-inch (1,981 mm) drivers.[1] Seven were later converted to 72-inch (1,829 mm) drivers and classified D6a.[1]

The D6 was one of the first American 4-4-0s to place the firebox above, rather than between, the locomotive's frames.[4] This added about 8 inches to the possible width of the firebox, enabling a larger, easier to fire and more powerful locomotive; the maximum fire grate area increased to about 35 sq ft (3.25 m2) from the previous maximum of about 18 sq ft (1.67 m2).[5]

The innovation was not wholly new, having been first seen on the Philadelphia and Reading Railroad's 1859 Vera Cruz, designed by James Milholland of that road and built in their own shops; the Reading used this design until the invention of the Wootten firebox in 1877.[6] It was subsequently adopted by the Baldwin Locomotive Works in 1881 for six locomotives constructed for the Central of New Jersey; these were followed by the Pennsylvania Railroad locomotives, which garnered more attention for this design feature, in addition to having larger drivers than most previous 4-4-0s.

References

  1. 1 2 3 4 5 "PRR Steam Roster". Northeast Rails. Retrieved December 31, 2007.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pennsylvania Railroad. "D6 Diagram". PRR.Railfan.net. Retrieved December 31, 2007.
  3. 1 2 Staufer, Alvin F. and Pennypacker, Bert (1962). Pennsy Power: Steam and Electric Locomotives of the Pennsylvania Railroad, 1900–1957. Staufer. LCCN 62020878.
  4. Gunsaulus, Frank W. (ed.) (1906). Modern Engineering Practice. American School of Correspondence.
  5. "Mechanical Stokers for Locomotives". Cassier's Magazine. Vol. XXXII no. 1 (New York: Cassier Magazine). May 1907. p. 75.
  6. Report of the Proceedings of the Nineteenth Annual Convention of the American Railway Master Mechanics' Association in Convention at Tremont Temple, Boston, Mass., June 15th, 16th and 18th, 1886. Cincinnati, Ohio: Aldine. 1886.
This article is issued from Wikipedia - version of the Sunday, January 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.