PRR M1

Pennsylvania Railroad M1

PRR M1a on display at the 1939 World's Fair. Pipe on the smokebox and box behind stack are components of the feedwater heater.
Type and origin
Power type Steam
Builder PRR Altoona Works,
Baldwin Locomotive Works,
Lima Locomotive Works (50)
Serial number Lima 7099–7123, 7443–7467
Total produced 301
Specifications
Configuration 4-8-2
Gauge 4 ft 8 12 in (1,435 mm)
Driver diameter 72 in (1.829 m)
Adhesive weight 271,000 lb (123,000 kg; 123 t)
Loco weight 390,000 lb (177,000 kg; 177 t)
Water cap 22,090 US gal (83,600 l; 18,390 imp gal)
Tender cap 31.5 lb (14.3 kg; 0.0143 t)
Boiler pressure M1a: 250 psi (1.72 MPa),
M1b: 270 psi (1.86 MPa)
Cylinders Two
Cylinder size 27 in × 30 in (686 mm × 762 mm)
Performance figures
Tractive effort M1a: 64,550 lbf (287.1 kN),
M1b: 69,700 lbf (310.0 kN)
Factor of adh M1a: 4.20,
M1b: 3.89
Career
Operators Pennsylvania Railroad
Class M1, M1a,
Number in class M1: 201, M1a: 100
Numbers M1: 6699, 6800–6999, M1a: 6700–6799
Disposition #6755 preserved, remainder scrapped
[1]

M1 is a class of steam locomotive of the Pennsylvania Railroad (PRR). It was a class of heavy mixed-traffic locomotives of the 4-8-2 "Mountain" arrangement, which uses four pairs of driving wheels with a four-wheel guiding truck in front for stability at speed and a two-wheel trailing truck to support the large firebox needed for sustained power. Although built for both passenger and freight work, they spent most of their service lives hauling heavy high-speed freight trains. Many PRR men counted the M1 class locomotives as the best steam locomotives the railroad ever owned.

History

A single prototype, #6699, was built in 1923 at the railroad's Altoona Works. It spent three years in testing, including all kinds of main line service as well as a session on the railroad's static test plant. Having received favorable reports, a further 200 were ordered from commercial locomotive builders; 175 from the Baldwin Locomotive Works and 25 from Lima Locomotive Works. Breaking with the PRR tradition of random locomotive numbering, these were numbered in a solid block from #6800-#6999.

In 1930 100 more were ordered; this class M1a had several improvements. Instead of separate cylinder block and smokebox saddle castings, the M1a had a one-piece casting (first seen on the K5 Pacific) with inside steam delivery pipes, instead of the outside, visible pipes of the M1. A Worthington feedwater heater was installed, with a boxlike mixing chamber behind the stack. Twin cross-compound air compressors were hung next to each other on the left side, instead of the single compressor of the M1. The M1a locomotives had larger tenders than the previous locomotives.

The M1a locomotives were intended for passenger as well as freight service, and some bore decorative gold-leaf lining on tender and cab sides, but they proved better suited to freight work, and extensive electrification saw a surplus of K4s locomotives available for passenger trains. While they were mostly used on freight, their dual service purpose entitled them to have smokebox mounted keystone shaped numberplates. Freight engines on the Pennsy had circular numberplates.

The twin cross-compound air compressors on the side of the M1a.

Like most PRR steam locomotives, the M1 and M1a featured the square-shouldered Belpaire firebox. The square-topped section continued ahead of the firebox proper, revealing the presence of a combustion chamber - an extended firebox, giving more room for complete combustion of burning gases. The standard M1/M1a boiler used a working pressure of 250 pounds per square inch (1.72 MPa). 38 locomotives were later converted into class M1b; the differences were all in the boiler, those being the addition of firebox circulatorslarge tubes carrying water passing through the firebox space, increasing water circulation and heating area, and thus steam generationand an increase in boiler pressure to 270 psi (1.86 MPa). The only externally visible difference was extra cleaning plugs in the firebox sides, for washing out the circulators. The M1b had greater tractive effort, thanks to the greater pressure, and more power at speed.

All were fitted with 72-inch (1.829 m) driving wheels, two 27 in × 30 in (686 mm × 762 mm) cylinders, and cast-steel KW pattern trailing trucks, similar to those fitted to K4s Pacifics. M1 and M1a tractive effort was 64,550 pounds-force (287.1 kN) while that of the M1b was 69,700 pounds-force (310.0 kN). Weight was 385,000 pounds (174.6 t). PRR standard small steel cabs were used. A spotting feature was a large cross-mounted air tank at the front of the locomotive above the pilot. There was a family resemblance with other PRR locomotives. After World War II the M1 locomotives underwent similar front-end changes to those made to the K4s, including sheet steel drop-coupler pilots, the moving of the headlight to the smokebox top in front of the stack, the moving of the steam-driven generator to the smokebox front for easier maintenance, and the addition of a wide step above the air tank to service the air compressor.

Pennsylvania Railroad M1b #6755 at the Railroad Museum of Pennsylvania on July 31st, 2015.

A variety of tenders were fitted to M1 locomotives, of steadily increasing size. During later years some hauled sixteen-wheel 210-F-75B tenders almost as long as the locomotives themselves. All were fitted with scoops to pick up water from track pans. On the rear tender decks, all were later fitted with "doghouses" for the head-end brakeman on freight trains, giving him a view backward over the train and placing him out of the way of the engineer and fireman. Many had railing-like trainphone antennas added during the 1940s.

As dieselization progressed the M1 locomotives were assigned heavier trains, while the diesels were assigned the high-speed freight trains previously the M1s' preserve. Their final years of service saw them hauling heavier trains than ever. Many remained in service until the withdrawal of steam from the PRR in mid 1957.

One locomotive, M1b #6755, was saved from the scrapper's torch for the PRR's historical collection housed at Northumberland, Pennsylvania. It is now in the possession of the Railroad Museum of Pennsylvania. It was added to the National Register of Historic Places in 1979 as Locomotive No. 6755.

See also

References

  1. "Principal dimensions of PRR M-1, M-1a and M-1b freight locomotives". Trains. Vol. 8 no. 1. November 1947. p. 62.

Further reading

External links

Wikimedia Commons has media related to Pennsylvania Railroad M1.
This article is issued from Wikipedia - version of the Saturday, October 10, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.