Potosi (barque)

The Potosi under full sail
History
Name: Potosi
Namesake: City of Potosí in Bolivia
Owner: F. Laeisz Shipping Company
Route: Hamburg-Chile
Ordered: 1894
Builder:
Cost: M 695,000.00
Yard number: 133
Laid down: November, 1894
Launched: June 8, 1895
Christened: June 8, 1895
Commissioned: July 26, 1895
Maiden voyage: July 26, 1895 to Iquique, Chile
Out of service: 1914–1920 (WWI)
Renamed: Flora (1923)
Homeport:
Identification:
Fate: Sold to Chile in 1923, caught fire on September 15, 1925 and sunk by the Argentine cruiser Patria on October 19, no loss of men
Status: Wreck
Badge: None; figurehead (river god or mountain spirit)
General characteristics
Class and type:
  • Five-masted barque, steel hulled,
  • bulk carrier, nitrate carrier
Tonnage: 4,027 GRT / 3,854 NRT
Displacement: 8,350 ts (at 6,400 ts load)
Length:
Beam: 49.7 ft (15.1 m)
Height:
  • 210.96 ft (64.30 m) (keel to masthead truck)
  • 185.7 ft (56.6 m) (waterline to masthead truck)
Draft: 25.49 ft (7.77 m)
Depth: 30.15 ft (9.19 m) (depth moulded)
Depth of hold: 28.38 ft (8.65 m)
Decks: 2 continuous steel, poop, midship, and forecastle decks
Deck clearance: 8 ft (2.4 m)
Installed power: No auxiliary propulsion; donky engine for sail winches, loading gear, pumps
Propulsion: Sail
Sail plan: 43 sails: 24 square sails, 12 staysails, 4 foresails, 3 spankers (56,510.53 sq ft / 5.250 m² [sq meters])
Speed: 19 knots (35 km/h)
Boats & landing
craft carried:		 4 lifeboats
Capacity: 6,400 ts load
Complement: max. 44
Crew: Captain, 1st, 2nd, & 3rd mates, steward, 35-39 able seamen and shipboys

The Potosi was a five-masted steel barque built in 1895 by the German sailing ship company F. Laeisz as a trading vessel.[1] As its shipping route was between Germany and Chile, it was designed to be capable of withstanding the rough weather encountered around Cape Horn.[2]

The Potosi was named after the eponymous Bolivian town of Potosí (the highest city in the world),[3] the name beginning with "P" according to a Laeisz' tradition begun in the 1880s.[4] The Potosi and sister ships became known as the Flying P Line[5] and were described by Robert Carter as "without doubt, the most successful fleet of sail-driven ships ever assembled under one flag..."[6][7]

The Potosi had five masts and was rigged as a barque, meaning that the first four masts were Square-Rigged, each carrying six sails, and the fifth mast carried fore-and-aft-sails. She was the third windjammer in the world merchant fleet with that kind of rigging, after the France I of the Antoine-Dominique Bordes line of Bordeaux, and the first German (auxiliary) steel barque Maria Rickmers of the Rickmers line. In total, within the world merchant fleet, there were only six windjammers of this class of five-masted barque rigging, with four masts having carried six sails on each mast. The Potosi's sister ship, Preussen also had five masts, but was square rigged on each mast.[8]

The idea of building such a ship for the Laeisz fleet came from the famous Laeisz-captain Robert Hilgendorf, who was to become the Potosi's first master. His considerations and ideas had a great influence on the ship's design and he was the supervising ship officer when the huge barque was under construction. She was assigned the call sign RKGB, and as with all P-liners her hull was black with a white waterline and a red underwater ship—the colours of the German flag at that time. Author Daniel S. Parrott describes the features of the "Flying P-Liners" and says "The effectiveness of the Flying P-Line lay not only in the construction of the vessel but also in their management." He also points out that "none of the four- or five-masted Laeisz ships ever foundered or was dismasted in a Cape Horn storm in the course of countless voyages."[9]

During World War I, she was interned in Chile, and was then given away as reparation. Under Chilean ownership, she was renamed the Flora (sign QEPD). In 1925, she caught fire in the Atlantic and eventually had to be sunk by artillery.

History

The Potosi at wharf

The Potosi was launched in 1895 at the shipyard of J. C. Tecklenborg AG, Geestemünde and was used in the saltpeter trade (Salpeterfahrt) between Chile and Germany, setting record speeds in the process, due to her excellent sailing characteristics. She made twenty seven "round voyages" (Hamburg to Chile and back) under five captains between 1895 and 1914. Her first master, the legendary sea captain Robert Hilgendorf, sailed her up to 1901. Capt. Georg Schlüter (2 round voyages), Jochim Hans Hinrich Nissen (10), Johann Frömcke (3), and Robert Miethe (4) followed.

On September 23, 1914 the Potosi was interned at Valparaiso as she entered the harbour, since the war had begun. In 1917 while moored in Chile, she was sold to the F. A. Vinnen shipping company of Bremen, but on October 2, 1920 she was given to France as a war reparation. The French government sold her to Argentina which transferred her to the Floating Docks Co. of Buenos Aires. There she laid up for three years when she was eventually purchased by the Chilean company González, Soffia & Cía. of Valparaíso, and renamed the Flora. August Oetzmann, a former Laeisz captain, sailed her to Hamburg with a cargo of nitrate in 110 days (due to less able seamen). Many people of Hamburg came to welcome the old lady and wished Laeisz to purchase her from the Chilean owner but her former owners didn't.

The Flora sailed back to Chile (May 25) via Cardiff (July 17) to take up a cargo of coal for Mejillones. On September 15, 1925, en route to Cape Horn, the ship caught fire off the Patagonian coast northwest of the Falkland Islands (at 50°17.5'S, 61° 42'W). Captain A. Oetzmann decided to set course to Comodoro Rivadavia, reaching the harbour, which was merely a bay with a sandy beach, a long wooden pier, and several petrol tanks, on September 18, 1925. He anchored the ship five miles (8 km) off the coast in the roads of Comodoro Rivadavia and alerted the harbour authorities to fight the fire in the ship. As no proper equipment was available, it took three days before help came. The ordered fire engine that came was not able to extinguish the fire. Next day a huge explosion ripped her steel decks apart. The main mast fell overboard pulling the rest of the rigging with it except for the foremast. A tug tried to tow her away from the petrol tanks, and succeeded after several attempts. The Flora ran aground on the sandy beach. The seamen dropped the anchor and took everything usable from the ship. The fire kept burning while the ship's hull was repeatedly lifted by the waves and slammed into the shore. The coal-filled hull burned for some days. One morning the ship had disppeared from the beach. The rudderless hull was found a few days later floating 25 nautical miles (46 km) off the coast and 80 nautical miles (150 km) to the north of Comodoro Rivadavia. The Argentine cruiser Patria sank the burning hull of the former famous ship by gunfire on October 19, 1925.[10] The wreck lies near the position 45°15′S 66°15′W / 45.250°S 66.250°W / -45.250; -66.250Coordinates: 45°15′S 66°15′W / 45.250°S 66.250°W / -45.250; -66.250.

Technical data

The Potosi was steel-built, with a waterline length of 110 m and a total hull length of 122.42 m. The hull was 15.15 m wide and the ship had a displacement of 8,350 tons, for an effective carrying capacity of 6,400 tons. The ship had only one bulkhead in the bow section—the collision bulkhead. The ship had five masts, four of which were fully rigged, with courses, upper and lower topsails, upper and lower topgallant sails, and royals. Counting the staysails (12) including jibs (4), she carried 43 sails (24 square sails in six storeys, 12 (normally 9) staysails between the five masts, four foresails (jibs) and three fore-and-aft spanker sails including two spanker sails on two gaffs and a spanker topsail) with a total sail area of 56,510.53 sq ft (5,250.000 m2) [5,250 sq metres].[11] Not only the hull was steel, but also her masts (2.82 ft (0.86 m) in diameter on deck level, lower and top mast were made in one piece) and most of all spars (yards except for the royal yards, spanker boom) were constructed of steel tubing, and many of the rigging was steel cable. The only wooden spars were the four royal yards, the four topgallant masts and the two gaffs of the spanker fore-and-aft sails. She was designed as a so-called "three-island-ship", i.e. a ship that has a midship island (67.2 ft (20.5 m)), also called midship bridge or "Liverpool house" (the first ships equipped with that feature came from Liverpool yards), beside the forecastle (41.1 ft (12.5 m)) and poop (26 ft (7.9 m)) decks. There, inside the Liverpool house, dry and well-ventilated accommodations for crew, mates, and captain were installed, as well as the pantry and chart room. The main helm—a double rudder wheel of 5.8 ft (1.8 m) diameter—stood on top, well protected against huge waves. A second helm were near the stern. Under good conditions, the huge barque could reach a speed of 19 knots (35 km/h). Her best 24-hour-run were 376 nm in 1900 under Capt. Hilgendorf. The Potosi was manned by a crew of 40–44. She was the fastest P-liner apart from the five-masted fully rigged ship Preußen which could reach speeds of more than 20 knots (37 km/h), but was less maneuverable.

Naming the masts

Her five masts were named as follows:

In German:


See also

References

  1. ↑ "built in Germany for Reederei F. Laeisz for her famous Flying P Line"—Peter D. Jeans: Seafaring Lore and Legend: A Miscellany of Maritime Myth, Superstition
  2. ↑ 1890: At the end of the 19th century sailing ships and steamships are in equal use with the number of large sailing vessels on the decline. Yet not for the F. Laeisz shipping line whose famed sailing ships will continue to race around Cape Horn for another four decades. Even today, the "Flying P-Line" sailing ships are world-renowned.
    1895: The ultimate of the "Flying P Liner" sailing ships, the POTOSI, is a five-masted ship designed to withstand rough weather. It completes two round trips to Chile per year.—www.laeisz.de
  3. ↑ "Potosi – Bolivia City Guide". Bolivia Web Interactive. Bolivia Web. 1995–2007. Retrieved 2008-09-28.
  4. ↑ principally through the vision of the German shipowner Ferdinand Laeisz with his famous Flying "P" Line—Rigel Crockett: Fair Wind and Plenty of it: A Modern-day Tall Ship Adventure
  5. ↑ part of the latter's famous Flying P Line—Max Wood Sailing Tall: Around the World on the Square-Rigged Passat (1946-1948)
  6. ↑ Without doubt, the most successful fleet of sail-driven ships ever assembled under one flag were those operated by Ferdinand Laeisz of Germany. ... few sailing ships were built in Britain that could equal the size, power and strength of the Laeisz 'P' Liners, as they were called ... the nickname 'Flying P Line', which referred to the speed and power of the ships as much as to their names.—Robert Carter: Windjammers, Rosenberg Publishing Pty, Limited, 2004, ISBN 1-877058-04-1
  7. ↑ the famous Line of the Flying P' nitrate ships out of Hamburg, from the House of Laeisz.—Alan Villiers Pioneers of the seven seas
  8. ↑ Tony Gibbons, The Encyclopedia of Ships, Silverdale Books (2001), ISBN 1-85605-591-4
  9. ↑ this process of experimentation, which culminated in two monstrous sailing ships: the 4,029-ton, five-masted barque Potosi, launched in 1895, and the 5,081-ton, five-masted, full-rigged ship Preussen in 1920. Regardless of the sailing cruise liners of recent times, these two Laeisz ships remain the last word on square rig. Operational lessons learned by the company and its shipmasters through routine roundings of the Horn benefited the new vessels and led to increasingly efficient voyages. By the early 1900s, Laeisz had come to favor the four-masted barque of around Pamir's size. The P-Liners employed a number of innovations to make them stronger, safer, and more efficient than other ships of their type. Steel hulls and spars and wire standing rigging enabled the vessels to be driven hard. None of the four- or five-masted Laeisz ships ever foundered or was dismasted in a Cape Horn storm in the course of countless voyages. Safety nets helped prevent crew from falling overboard. A midships bridge deck provided an elevated working platform to break the force of boarding seas and diminish the volume of water on deck at any given time. Laborsaving devices such as the Jarvis brace winch made it possible to brace the yards with only one watch. Such improvements increased efficiency while reducing injury and crew size. The effectiveness of the Flying P-Line lay not only in the construction of the vessel but also in their management. – Daniel S. Parrott: Tall Ships Down: The Last Voyages of the Pamir, Albatross, Marques, Pride of Baltimore, and Maria Asumpta, McGraw-Hill Professional ISBN 0-07-143545-X
  10. ↑ Buques Perdidos en el area de la Prov. de Santa Cruz Historia y Arqueología marítima (Spanish)
  11. ↑ Sometimes a much less area of 4,700 sq metres is mentioned which is not correct. Big four-masted barques had sail areas of 4,400 sq metres.

External links

Wikimedia Commons has media related to Potosi.
This article is issued from Wikipedia - version of the Wednesday, March 23, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.