Earthenware

Painted, incised and glazed earthenware. Dated 10th century, Iran. New York Metropolitan Museum of Art
Top Section of a Water Jug, earthenware, late 12th-early 13th century. Brooklyn Museum.

Earthenware is pottery that has not been fired to vitrification and is thus permeable to water.[1] Many types of pottery have been made from it from the earliest times, and until the 18th century it was the most common type of pottery outside the far East. Stoneware and porcelain are the other most important types of pottery.

Definition

Two panels of glazed earthenware tiles painted with polychrome glazes over a white glaze. (19th century)

Earthenware is a type of ceramic that when fired is opaque and non-vitreous,[2] soft and capable of being scratched with a knife.[3] The Combined Nomenclature of the European Communities describes it as being made of selected clays sometimes mixed with feldspars and varying amounts of other minerals and white or light-colored (i.e., slightly greyish, cream or ivory).[2] ASTM International says it is "a glazed or unglazed nonvitreous ceramic whiteware".[4] It is very often glazed and may be painted.

Terracotta is a term used for sculpture and utilitarian objects such as plant pots, tiles, and drainage pipes made of earthenware.

Characteristics

Generally, earthenware bodies exhibit higher plasticity than most whiteware bodies and hence are easier to shape by RAM press, roller-head or potter's wheel than bone china or porcelain.[5][6]

Due to its porosity, earthenware, with a water absorption of 5-8%, must be glazed to be watertight.[7] Earthenware has lower mechanical strength than bone china, porcelain or stoneware, and consequently articles are commonly made in thicker cross-section, although they are still more easily chipped.[5]

Darker-colored earthenwares, typically orange or red, due to a comparatively high content of iron oxide are widely used for flower pots, tiles and some decorative and oven wares.[3]

Production

A general body formulation for contemporary earthenware is 25% kaolin, 25% ball clay, 35% quartz and 15% feldspar.[5][8]

Terracotta flower pots with terracotta tiles in the background.

Earthenware may be biscuit (or "bisque")[9][10] fired to temperatures between 1,000 and 1,150 °C (1,800 and 2,100 °F) and glost-fired[11] (or "glaze-fired")[3][12] to between 950 to 1,050 °C (1,740 to 1,920 °F), the usual practice in factories and some studio potteries. Some studio potters follow the reverse practice, with a low-temperature bisque firing and a high-temperature glost firing. The firing schedule will be determined by the raw materials used and the desired characteristics of the finished ware.

After firing most earthenware bodies will be colored white, buff or red. For red earthenware, the firing temperature affects the color of the clay body. Lower temperatures produce a typical red terracotta color; higher temperatures will make the clay brown or even black. Higher firing temperatures may cause earthenware to bloat.

Types of earthenware

Chinese earthenware tomb sculpture[13] The Walters Art Museum.

Earthenware comprises "all primitive pottery whatever the color, all terra-cottas, most building bricks, nearly all European pottery up to the seventeenth century, most of the wares of Egypt, Persia and the near East; Greek, Roman and Mediterranean, and some of the Chinese; and the fine earthenware which forms the greater part of our tableware today."[3] Most pottery from the earliest times onward was earthenware. Pit fired earthenware dates back to as early as 29,000–25,000 BCE.[14][15] Outside of East Asia, porcelain was manufactured only from the 18th-century, and then as an expensive luxury.

There are several types of earthenware, including:

References

  1. ↑ "Earthenware" Britannica online
  2. 1 2 Combined Nomenclature of the European Union Published by the EC Commission in Luxembourg, 1987
  3. 1 2 3 4 Dora Billington, The Technique of Pottery, London: B.T.Batsford, 1962
  4. ↑ ASTM C242. Standard Terminology Of Ceramic Whitewares And Related Products.
  5. 1 2 3 Whitewares: Testing and Quality Control. W.Ryan and C.Radford. Institute of Ceramics & Pergamon. 1987.
  6. ↑ Pottery Science: Materials, Process And Products. Allen Dinsdale. Ellis Horwood. 1986.
  7. ↑ Ceramics Glaze Technology. J. R. Taylor & A. C. Bull. Institute of Ceramics & Pergamon Press. 1986
  8. ↑ Dictionary of Ceramics, 3rd edition. A. E. Dodd & D. Murfin. Maney Publishing. 1994.
  9. ↑ Rich, Jack C. (1988). The Materials and Methods of Sculpture. Courier Dover Publications. p. 49. ISBN 9780486257426.
  10. ↑ "Ceramic Arts Daily – Ten Basics of Firing Electric Kilns". ceramicartsdaily.org. 2012. Retrieved 16 April 2012.
  11. ↑ Norton, F.H. (1960). Ceramics an Illustrated Primer. Hanover House. pp. 74–79.
  12. ↑ Frank and Janet Hamer, The Potter's Dictionary of Materials and Techniques
  13. ↑ "Women on Horseback". The Walters Art Museum.
  14. ↑ "Modern Ceramic Engineering: Properties, Processing And Use In Design." D.W. Richerson. CRC Press. 2006.
  15. ↑ "On the Origins of Pottery." P.M.Rice. Journal of Archaeological Method and Theory. Vol 6, No.1. 1999.

Further reading

External links

This article is issued from Wikipedia - version of the Sunday, May 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.