Steamboats of California

Steamboats operated in California on San Francisco Bay and the Sacramento–San Joaquin River Delta, and Sacramento River as early as November 1847, when the Sitka built by William A. Leidesdorff briefly ran on San Francisco Bay and up the Sacramento River to New Helvetia. After the first discovery of gold in California the first shipping on the bays and up the rivers were by ocean going craft that were able to sail close to the wind and of a shallow enough draft to be able to sail up the river channels and sloughs, although they were often abandoned by their crews upon reaching their destination. Regular service up the rivers, was provided primarily by schooners to Sacramento and Stockton but would take up to a week to make the trip.^[1][2]:22

First Steamboats on the Sacramento River and Delta

According to the January 11, 1854, Sacramento Daily Union, the first steamboat in California, besides the Sitka, was the Pioneer brought out in pieces from Boston, and put together at the West Point, in Benicia, and launched there in August, 1849, by the "Edward Everett Company". She was a side-wheeler, 70 feet in length, 25 feet beam, with an eight horse power engine that made "4 knots an hour, against wind and tide" and would normally carry forty passengers in her cabin and on her decks. In September, she made one trip to Sacramento and back, then was sold to Simmons, Hutchinson & Co. for service between Sacramento and the Yuba River.^[3] The first steamboat advertised in the Weekly Alta California, on October 18, 1849, providing transport between San Francisco and Sacramento, and touching at Benicia, was the Mint, a 36-foot iron hulled vessel.^[4]

The first large vessel running between San Francisco and Sacramento was the steamship McKim, a 400-ton ex Army propeller driven transport steamship that had sailed to California from New Orleans, that made its first regular run up river on October 26, 1849 in 17 hours, touching at Benicia on the way to Sacramento. Its schedule was to leave San Francisco on Mondays and Thursdays at 7 a.m. returning, it left Sacramento on Wednesdays and Fridays at 7 a.m.. $30 was charged for passage in cabins, $20 on deck, berths in staterooms $5, $1.50 meals for cabin passengers only. Heavy freight was $2.50/100 pounds or $1.00 per foot for measured goods.^[5] During its early trips on the route it made $16,000 each trip for the Simmons, Hutchinson & Company. The second and larger steamer up the Sacramento was the 755 ton side-wheel steamship SS Senator, a former Atlantic coastal steamer from Boston. It arrived from its voyage around Cape Horn, on October 7, 1849 and began running on the river November 8th, and began bringing in $60,000 each month.^[6]

In the early frenzy to reach California several steamboats made the voyage around Cape Horn under their own power but not without many dangers and difficulty; the Antelope, Goliah, General Warren, New World, Hartford, Seneca and Wilson G. Hunt. The New York and the Rhode Island, also attempted it but were both lost without a trace. The W. J Pease only got to Montevideo, where the condition of its hull and boilers caused it to be condemned. With these exceptions during the first years of the California Gold Rush its first steamboats where from eastern shipyards, knocked down and sent by ship to San Francisco Bay. There on the beach of Yerba Buena Cove and elsewhere, enterprising forty-niner shipbuilders reassembled them on the Bay shore and sent them up the Sacramento River to Sacramento.

The first steamboats operating above Sacramento on the Sacramento River were the 52 ton Linda and the 36.5 ton Lawrence.^[2]:22 Also steamboats operated on the American River, tributary to the Sacramento River, up to Norristown, smaller boats as far as Coloma. On the Feather River they steamed up to Yuba City, and on the Yuba River to Marysville, both also tributaries of the Sacramento. Others steamed farther up the Sacramento river as far north as Red Bluff and the 42 ton steamboat Jack Hays reached Redding the head of navigation on the Sacramento, during the spring flood on May 8, 1850.^{[7]:16, 144-145[2]:22}

Early San Joaquin River Steamboats

In November 1849, the Captain Sutter built at Yerba Buena Cove by Domingo Marcucci for the Aspinwall Steam Transportation Line was the first such steamboat up the San Joaquin River to reach Stockton.^[8] Marcucci next converted for the Sacramento run, the El Dorado, a 153 ton side-wheel steamboat that had been rigged as a 3 masted schooner to sail around Cape Horn. In April 1850, another of Marcucci's boats, the sidewheeler Georgiana pioneered the short cut route through the Delta between Sacramento and Stockton. It led through what afterward was known as Georgiana Slough, which connects the Sacramento River with the San Joaquin River through the Mokelumne River.^{[8]:14 [9]} In May 1850, the Georgiana pioneered the route from Stockton up the San Joaquin River and Tuolumne River to Tuolumne City. Subsequently her captain, began a weekly service from Stockton to San Joaquin City, Grayson City and Tuolumne City timed to leave after the arrival of the Captain Sutter from San Francisco.^[7]:81,83

Later in the 1850s steamboats would reach up the San Joaquin River beyond Stockton as far south as Sycamore Point and to Fort Miller in the spring flood.^{[10]:7 [7]:82,145} San Joaquin steamboats could reach Watson's Ferry on Fresno Slough and could reach the lower Kern River and Tulare Lake in years when the lake overflowed down Fresno Slough to the San Joaquin River. Steamboats also operated on the Mokelumne River up to Lockford and the Tuolumne River, up to Empire City, both tributaries of the San Joaquin River.^{[7]:11,16,45,81,82}

California Steamboat Building

As machinery and boiler manufacturers, iron and timber suppliers appeared (including ship breaking yards scavenging the hundreds of hulks in Yerba Buena Cove, and in the river near Sacramento and Stockton), steamboats and steam ferries were built entirely in California shipyards from 1856 onward, at Steamboat Point and later the The Protrero, and Hunters Point around Mission Bay. Also at Benicia, Stockton, Oakland, Soquel, Vallejo, Washington and Yuba City. Many of these builders also built for the needs of other places on the west coast, including the coastal bays of California, the Colorado River, the Columbia River and its tributaries, the Puget Sound, and elsewhere in Oregon, Washington Territory, and the West Coast of Mexico, Central and South America often craftsmen traveled to build these craft locally. This continued until these places were able to build their own.^[7]:142-143

Reference

1. 25 Weekly Alta California, Number 43, 25 October 1849, p.3, col.4
2. Steam Navigation in the United States, Pacific Coast, Census Reports Tenth Census: Report on the agencies of transportation in the United States, including the statistics of railroads, steam navigation, canals, telegraphs, and telephones, U.S. Government Printing Office, Washington, D. C., 1883. pp.22-31
3. Sacramento Daily Union, Volume 6, Number 875, 11 January 1854, p.2, col.5
4. Weekly Alta California, Number 42, 18 October 1849. p.3, col.4
5. October 25, 1849, November 1, 1849, Weekly Alta California
6. Hubert Howe Bancroft, The works of Hubert Howe Bancroft, Volume 7; Volume 24, History of California, Vol. VII, p.131, note.5
7. Jerry MacMullen, Paddlewheel Days In California, Stanford University Press, Stanford, 1970.
8. Scott, Erving M. and Others, Evolution of Shipping and Ship-Building in California, Part I, Overland Monthly and Out West Magazine, Volume 25, January 1895, pp.5-16; from quod.lib.umich.edu accessed March 10, 2015
9. San Francisco Call, Volume 87, Number 99, 9 March 1902, p.6 FIRST BOATBUILDER ON THE PACIFIC COAST by J. M. Scanland
10. HISTORIC CONDITIONS IN THE SAN JOAQUIN RIVER WATERSHED from sierrafoothill.org accessed March 23, 2015