Tallawarra Power Station

Tallawarra Power Station
Location of the Tallawarra Power Station in New South Wales
Country Australia
Location Yallah, western shore of Lake Illawarra, Shellharbour
Coordinates 34°31′22″S 150°48′29″E / 34.52278°S 150.80806°E / -34.52278; 150.80806Coordinates: 34°31′22″S 150°48′29″E / 34.52278°S 150.80806°E / -34.52278; 150.80806
Status Operational
Commission date 2009
Owner(s) EnergyAustralia
Thermal power station
Primary fuel Natural gas
Combined cycle? yes
Power generation
Units operational 1 × 260 MW GT26 gas turbine
1 × 160 MW steam turbine
Make and model Alstom
Nameplate capacity 435 MW

Tallawarra Power Station is a 435 MW combined cycle natural gas power station[1] in the city of Shellharbour, New South Wales, Australia. Owned and operated by EnergyAustralia, the station is the first of its type in New South Wales[2] and produces electricity for the state during periods of high demand.[3] It is located on the western shore of Lake Illawarra in the suburb of Yallah.

The station comprises a 260 MW gas turbine and a 160 MW steam turbine unit[3] and has a total capacity of 435 MW.[1] It uses many of the previous power station's structures including the cooling system channels from Lake Illawarra. The power station is connected to the state grid via a 132 kV switching station maintained by Integral Energy.

TRUenergy has also indicated that an additional power plant is being considered for the site, to be known as Tallawarra B.[1]

History

Tallawarra originally operated as a coal-fired power station beginning in 1954 and reaching full operation by 1961.[4] At its peak, it had a capacity output of 320 MW. 'A' station had four 30 MW Thomson-Houston 2 stage (HP+LP) turbo generators. Steam was supplied by four Simon Carves pulverised fuel boilers at 140,000 kg/h (300,000 lb/h) at a pressure of 4.31 MPa (625 psi) and a temperature of 463 °C (865 °F). In 1960 "B" station was built having two 100 MW English Electric 3-stage turbo generators (No5+6). The generators were hydrogen-cooled but didn't have any stator water cooling. Steam was supplied by 2 ICAL pulverised coal burning boilers at a rate of 360,000 kg/h (800,000 lb/h) at a pressure of 11.6 MPa (1,680 psi) and a temperature of 538 °C (1,000 °F). The station closed in 1989, and stood abandoned by the foreshore of Lake Illawarra. It was demolished over a ten-year period.[5]

In early 2003 the site was sold by Pacific Power to TRUenergy (then known as TXU) and construction of the gas-fired combined cycle plant began in November 2006. The plant consists of a gas turbine of 288 MW and a 3-stage steam turbine of 160 MW with a single 450 MW generator. A unique feature is the waste heat boiler with a super heater and two reheater sections for the IP and LP stages of the turbine. Overall thermal efficiency is 60%.[6] It was opened by the NSW Premier Nathan Rees on 18 March 2009.[7]

References

  1. 1 2 3 "Tallawarra Power Station". EnergyAustralia. Retrieved 2015-06-24.
  2. "Tallawarra power station". TRUenergy. Retrieved 2009-03-08.
  3. 1 2 "Tallawarra Power Station FAQs". TRUenergy. Retrieved 2009-03-08.
  4. "Yallah History". Wollongong City Library. Archived from the original on June 18, 2009. Retrieved 2009-03-08.
  5. "Transforming Tallawarra: GT26 based plant for booming New South Wales". Modern Power Systems. Retrieved 2007-09-28.
  6. "Tallawarra recent history". TRUenergy. Retrieved 2009-03-08.
  7. "Tallawarra taking off in NSW". EcoGeneration. Retrieved 2010-04-25.
This article is issued from Wikipedia - version of the Monday, April 18, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.