USS Baltimore (C-3)

For other ships of the same name, see USS Baltimore.
Baltimore in 1891
History
United States
Name: Baltimore
Namesake: Baltimore, Maryland
Builder: William Cramp & Sons, Philadelphia
Cost: $1,546,172.13 (hull and machinery)
Laid down: 5 May 1887
Launched: 6 October 1888
Sponsored by: Mrs. Theodore D. Wilson, wife of Chief Constructor Wilson
Commissioned: 7 January 1890
Decommissioned: 15 September 1922
Reclassified: CM-1
Struck: 14 October 1937
Identification:
Fate: sold, 16 February 1942
General characteristics
Displacement: 4,413 long tons (4,484 t)
Length: 336 ft (102 m)
Beam: 48 ft 6 in (14.78 m)
Draft: 20 ft 6 in (6.25 m)
Installed power:
Propulsion: 2 × screws
Speed: 19 knots (35 km/h; 22 mph)
Complement: 386 officers and men
Armament:
Armor:

The fourth USS Baltimore (C-3) (later CM-1) was a United States Navy cruiser, the fifth protected cruiser to be built by an American yard. Like the previous one, Charleston, the design was commissioned from the British company of W. Armstrong, Mitchell, and Company of Newcastle. Baltimore was an all-around improvement on Charleston, somewhat larger with more guns, thicker armor, and better machinery.[1][2][3]

She was launched on 6 October 1888 by William Cramp and Sons Ship and Engine Building Company, in Philadelphia, sponsored by Mrs. Theodore D. Wilson, wife of Chief Constructor Theodore D. Wilson; and commissioned on 7 January 1890, with Captain W. S. Schley in command.[4]

Design and construction

Baltimore was built to plans purchased from Armstrong, a British manufacturer, which were similar to an unsuccessful Armstrong bid for the Spanish cruiser Reina Regente.[1][3] Unlike the preceding Charleston, these plans included a modern triple expansion engine designed by Humphrys, Tennant & Co.[2] Baltimore's initial cost for hull and machinery was $1,546,172.13.[5]

Baltimore was armed with four 8 inch (203 mm)/35 caliber Mark 4 guns in sponsons on either side of the bow and stern, and six 6 inch (152 mm)/30 caliber Mark 3 guns[6] in sponsons along the sides. Secondary armament was four 6-pounder (57 mm (2.2 in)) guns, two 3-pounder (47 mm (1.85 in)) Hotchkiss revolving cannon, two 1-pounder (37 mm (1.5 in)) Hotchkiss revolving cannon, and two .45 caliber (11.4 mm) Gatling guns.[1][3] Four 14-inch (356 mm) torpedo tubes were included in the design but never mounted.[2]

Baltimore had 4.5 in (110 mm) gun shields and a 3 in (76 mm) conning tower. The armored deck was up to 4 in (100 mm) on its sloped sides and 2.5 in (64 mm) elsewhere.[1]

The as-built engineering plant included four coal-fired cylindrical boilers producing steam for two horizontal triple expansion engines totaling 10,750 ihp (8,020 kW) for a designed speed of 19 knots (35 km/h; 22 mph), although 20 knots (37 km/h; 23 mph) was achieved on trials.[1][3] Baltimore was among the first US Navy ships with the more powerful and efficient triple expansion engines. Unlike some contemporary designs, no sails were fitted. Baltimore carried 400 tons of coal for a range of 3,838 nmi (7,108 km; 4,417 mi) at 10 kn (19 km/h; 12 mph); this could be increased to 850 tons for 8,155 nmi (15,103 km; 9,385 mi).[3]

Refits

Baltimore was rebuilt 1900-03 with the armament replaced by 12 6 inch (152 mm)/40 caliber Mark 7 guns,[6] the 8-inch guns being removed.[1] The secondary armament was replaced (or augmented) by six 3 inch (76 mm)/50 caliber guns.[2] The boilers were replaced with eight Babcock & Wilcox boilers.[1] In 1913-14 she was converted into a minelayer at the Charleston Navy Yard with four 6"/40 guns and a capacity of 180 mines.[2] In an armament upgrade for World War I in 1917-18, her guns were replaced with four 5 inch (127 mm)/51 caliber guns and two 3 inch (76 mm)/50 caliber anti-aircraft guns.[1][2]

Service history

Pre-Spanish–American War

Baltimore became the flagship of the North Atlantic Squadron on 24 May 1890, and, from 15–23 August, conveyed the remains of the late Captain John Ericsson from New York City to Stockholm, Sweden. Captain Pilot Joseph Henderson, one of the oldest pilots in the service, piloted Baltimore to sea.[7] After cruising in European and Mediterranean waters with the European Squadron, she arrived at Valparaíso, Chile on 7 April 1891 to join the Pacific Squadron. She protected American citizens during the Chile revolution and landing men at Valparaíso on 28 August. Her activities in Chile around this time became known as the Baltimore Crisis. Arriving at the Mare Island Navy Yard on 5 January 1892, she cruised on the west coast of the U.S. until 7 October and then returned to the Atlantic. She took part in the naval rendezvous and review in Hampton Roads during March and April 1893, prior to the World's Columbian Exposition. Proceeding via the Suez Canal, she cruised as flagship of the Asiatic Station from 22 December 1893 – 3 December 1895, protecting American interests. Returning to Mare Island on 21 January 1896, she went out of commission on 17 February.[4]

Spanish–American War

Recommissioned on 12 October 1897, Baltimore sailed on 20 October for the Hawaiian Islands and remained there from 7 November 1897 – 25 March 1898. She then joined Commodore George Dewey's squadron at Hong Kong on 22 April. The squadron sailed from Mirs Bay, China on 27 April for the Philippines, and on the morning of 1 May entered Manila Bay and destroyed the Spanish fleet stationed there. Baltimore was second in line behind Olympia. In the Battle of Manila Bay, Baltimore was commanded by future Rear Admiral Nehemiah Dyer, who had served with Farragut at Mobile Bay.[4]

Baltimore remained in the Philippines on the Asiatic Station as the Spanish–American War transitioned into the Philippine–American War, convoying transports and protecting American interests until 23 May 1900, when she sailed for the United States, via the Suez Canal, arriving at New York on 8 September. In one instance, just before the outbreak of the Philippine–American War, the Baltimore sailed for Iloilo City accompanying troops whose mission was to occupy the city before General Martin Delgado's forces, loosely part of Emilio Aquinaldo's Philippine Revolutionary Army, could do so.[8] When the American forces arrived, General Delgado already occupied the city in the name of the Federal State of the Visayas.[8] After several weeks of a tense but peaceful stand-off, American troops and ships, including the Baltimore withdrew to Manila without landing on either Panay or Guimaras islands.[8]

Pre-World War I

Between 27 September 1900 – 6 May 1903, Baltimore was out of commission at New York Navy Yard. From 5 August – 23 December, she served with the Caribbean Squadron, North Atlantic Fleet, taking part in summer maneuvers off the coast of Maine, in the Presidential Review at Oyster Bay, New York (15–17 August), and in Santo Domingo waters. From 28 May-26 August 1904, she was attached to the European Squadron and cruised in the Mediterranean. On 26 September, she sailed from Genoa, Italy, for the Asiatic Station and spent the next two years cruising in Asiatic, Philippine, and Australian waters.[4]

Baltimore returned to New York on 24 April 1907 and went out of commission at New York Navy Yard on 15 May. On 20 January 1911, she was placed in commission in reserve and served as a receiving ship at Charleston Navy Yard (30 January 1911 – 20 September 1912). From 1913–1914, she was converted to a minelayer at the Charleston Navy Yard and recommissioned on 8 March 1915. From 1915–1918, she carried out mining experiments and operations in Chesapeake Bay and along the Atlantic coast.[4]

World War I

At the time of the American entry into World War I, Baltimore was training personnel. Early in March 1918, she was detailed to assist in laying a deep minefield off the north coast of Ireland in the North Channel.[4] She arrived at the Clyde on 8 March, and, from 13 April – 2 May, laid approximately 900 mines in the North Channel. On 2 June, she joined Mine Squadron 1 at Inverness, Scotland, and for four months participated in laying the North Sea Mine Barrage between the Orkney Islands and Norway by laying a total of 1,260 mines:

On 28 September, Baltimore sailed from Scapa Flow, Orkney Islands back to the U.S. She carried out mining experiments in the vicinity of the Virgin Islands until the end of the year.[4]

Inter-war period

In September 1919, she joined the Pacific Fleet, received the designation CM-1 (cruiser minelayer), and remained on the West Coast until January 1921. She then proceeded to Pearl Harbor, where she was subsequently placed out of commission on 15 September 1922. She then served as a receiving ship at Pearl Harbor, and was present during the Japanese attack there on 7 December 1941. She was sold for scrapping on 16 February 1942,[4] but one source states she was eventually towed out to sea and scuttled on 22 September 1944.[2]

References

  1. 1 2 3 4 5 6 7 8 Gardiner and Chesneau, p. 151
  2. 1 2 3 4 5 6 7 Bauer and Roberts, p. 143
  3. 1 2 3 4 5 Friedman, pp. 25, 459
  4. 1 2 3 4 5 6 7 8 "Baltimore IV (Cruiser No. 3)". Dictionary of American Naval Fighting Ships. Navy Department, Naval History & Heritage Command. 22 June 2015. Retrieved 23 January 2016.
  5. "Table 21 - Ships on Navy List June 30, 1919". Congressional Serial Set (Washington, D.C.: U.S. Government Printing Office): 762. 1921.
  6. 1 2 DiGiulian, Tony, US 6"/30, 6"/35, and 6"/40 guns at Navweaps.com
  7. New York Herald, 24 August 1890
  8. 1 2 3 Linn, pp. 37-41
  9. Belknap, p. 110

Bibliography

External links

Wikimedia Commons has media related to USS Baltimore (C-3).
This article is issued from Wikipedia - version of the Sunday, January 31, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.