List of Volkswagen Group diesel engines
List of Volkswagen Group diesel engines. The compression-ignition diesel engines listed below are currently used by various marques of automobiles and commercial vehicles of the German automotive concern, Volkswagen Group,[1] and also in Volkswagen Marine[2] and Volkswagen Industrial Motor[3] applications. All listed engines operate on the four-stroke cycle, and unless stated otherwise, use a wet sump lubrication system, and are water-cooled.[1]
Since the Volkswagen Group is European, official internal combustion engine performance ratings are published using the International System of Units (commonly abbreviated "SI"), a modern form of the metric system of figures. Motor vehicle engines will have been tested by a Deutsches Institut für Normung (DIN) accredited testing facility, to either the original 80/1269/EEC, or the later 1999/99/EC standards. The standard initial measuring unit for establishing the rated motive power output is the kilowatt (kW); and in their official literature, the power rating may be published in either the kW, or the 'Pferdestärke' (PS, which is sometimes incorrectly referred to as 'metric horsepower'), or both, and may also include conversions to imperial units such as the horsepower (hp) or brake horsepower (bhp). (Conversions: one PS ≈ 735.5 watts (W), ≈ 0.98632 hp (SAE)). In case of conflict, the metric power figure of kilowatts (kW) will be stated as the primary figure of reference. For the turning force generated by the engine, the Newton metre (Nm) will be the reference figure of torque. Engines shall be listed in the following ascending order.
- Number of cylinders,
- Engine displacement (in litres),
- Engine configuration, and
- Rated motive power output (in kilowatts).
As with the discontinued Volkswagen Group Diesel engines, whilst the Volkswagen Golf may have started the Diesel craze in Europe, every Diesel engine in each generation of the Volkswagen Golf has been offered in Industrial applications, and has since had impressive field results on par with an Isuzu, Kubota, or Yanmar Industrial Diesel engine in industrial applications, and has been as much of a workhorse as the latter Japanese choices.
The Diesel engines which Volkswagen Group previously manufactured and installed are in the list of discontinued Volkswagen Group diesel engines article.
- This transport-related list is incomplete; you can help by expanding it.
Three- and four-cylinder EA111 diesels
The EA111 series of internal combustion engines was introduced in the mid-1970s in the Audi 50, and shortly after in the original Volkswagen Polo. It is a series of water-cooled inline three- and inline four-cylinder petrol and Diesel engines, in a variety of displacement sizes. This overhead camshaft engine features a crossflow cylinder head design, and directly driven auxiliary units. The exhaust side is in driving direction, closest to the front of the vehicle.
EA288
EA288 engine family is based on EA189 engine family. EA288 diesel shares displacement, cylinder spacing, stroke and bore ratio with the EA189 and the new EA211 gasoline engines.[4] It is a family of 3-cylinder and 4-cylinder diesel engines featuring modular diesel engine system (MDB (Modularer Dieselmotorbaukasten)),[5][6][7] with dual-loop EGR system, with high pressure EGR and a cooled low-pressure EGR loops; variable valve train (VVT) with a camshaft adjuster, Bosch CRS 2-20 2000 bar common rail injection system, cylinder pressure control, a modular close-coupled aftertreatment system that includes a flow-through catalyst followed by a wall-flow diesel particulate filter (DPF). Euro 6 and US Tier 2 emission compliance is achieved via NOx adsorber-based system for smaller size vehicles or urea-SCR system for larger vehicles. Other features included low-friction bearings for the camshaft and balancer shafts, piston rings that have less pre-tension, a two-stage oil pump with volumetric flow control.[8][9]
The engine's displacement was between 1.6L and 2.0L, with power output between 66 and 140 kW.[10]
The engine was to be first used in 2015 model years of Volkswagen Golf, Volkswagen Beetle, Volkswagen Beetle Convertible, Volkswagen Passat, and Volkswagen Jetta.[11][12][13][14]
Two-cylinder diesels
0.8 R2 8v TDI 35kW
- applications
- 2014- CSCA Volkswagen XL1
Three-cylinder diesels
- This section is about current three-cylinder diesel engines, for discontinued three-cylinder diesel engines, see List of discontinued Volkswagen Group diesel engines#Three-cylinder diesels.
1.2 R3 12v TDI CR 55kW
- Origins
- Motor type: EA 189 / All R3 1199 ccm three cylinder engines are derived from the R4 1598 ccm 4 cylinder engine, VW just cut off one 399,5 ccm cylinder.
- identification
- parts code prefix: ???, ID code: CFWA
- engine configuration & engine displacement
- inline three-cylinder (R3/I3) Turbocharged Direct Injection (TDI) turbodiesel; 1,199 cubic centimetres (73.2 cu in), stroke: 79.5 by 80.5 millimetres (3.13 in × 3.17 in), stroke ratio: 0.99:1 - 'square engine', 399.6 cc per cylinder, compression ratio: 16.5:1
- cylinder block & crankcase
- cast iron
- cylinder head & valvetrain
- cast aluminium alloy; four valves per cylinder, 12 valves total, double overhead camshaft (DOHC)
- aspiration
- turbocharger, intercooler, water-cooled exhaust gas recirculation
- fuel system & engine management
- Delphi Multec Diesel Common rail System[15][16]
- DIN-rated motive power & torque output
- 55 kilowatts (75 PS; 74 bhp) @ 4,200 rpm; 180 newton metres (133 lbf·ft) @ 2,000 rpm
- applications
- 2009- Volkswagen Polo Mk5 (BlueMotion model with longer last two gears), 2010- SEAT Ibiza Mk5 Ecomotive, 2010- Škoda Fabia Mk2, 2010- Škoda Roomster,
1.4 R3 TDI PD 51-66kW
- Origins All R3 1422 ccm three cylinder engines are derived from the R4 1896 ccm 4 cylinder engine, VW just cut off one 474,1 ccm cylinder.
- identification
- parts code prefix: 045
- engine configuration & engine displacement
- inline three-cylinder (R3/I3) Turbocharged Direct Injection (TDI) turbodiesel; 1,422 cubic centimetres (86.8 cu in), bore x stroke: 79.5 by 95.5 millimetres (3.13 in × 3.76 in), stroke ratio: 0.83:1 - undersquare/long-stroke, 474.1 cc per cylinder, compression ratio: 18.0:1 to 19.5:1
- cylinder block & crankcase
- grey cast iron with bed-plate frame; inner and outer two-part oil sump; die-forged steel cross-plane crankshaft with 120 degree crankpins with four main bearings, simplex roller chain driven balance shaft; Mahle pistons; water:oil cooler
- cylinder head & valvetrain
- cast aluminium alloy, non-crossflow; two valves per cylinder, 6 valves total, each with two concentric valve springs, bucket tappets with manually adjustable rocker arms for valve clearance; timing belt-driven single overhead camshaft (SOHC)
- aspiration
- Bosch hot-film air mass meter, cast alloy Siemens-VDO throttle body with electronically controlled 'drive by wire' throttle butterfly valve, cast aluminium alloy intake manifold; Garrett variable turbine geometry (not all models) turbocharger incorporated in exhaust manifold, 2.3 bars (33.4 psi) absolute boost; side-mounted intercooler (SMIC)
- fuel system & engine management
- low-pressure fuel lift pump, underfloor fuel cooler; Pumpe Düse (PD) high-pressure direct injection (with three camshaft pressurised solenoid operated combustion chamber sited Unit Injectors), Bosch EDC15P+ electronic engine control unit
- exhaust system
- cooled exhaust gas recirculation, oxidising catalytic converter, EU4 compliance
- dimensions
- 127 kilograms (280 lb)
- DIN-rated motive power & torque outputs, ID codes
- 51 kilowatts (69 PS; 68 bhp) @ 4,000 rpm; 155 newton metres (114 lbf·ft) @ 1,600-2,800 rpm — (BNM:- Polo: 04/05-, Ibiza & Cordoba: 05/05-, Fabia: 10/05-, Roomster: 07/06-), (BWB:- Polo: 05/06-)
- 55 kilowatts (75 PS; 74 bhp) @ 4,000 rpm; 195 newton metres (144 lbf·ft) @ 2,200 rpm — (AMF:- Polo: 10/99-09/01, Arosa: 10/99-05/03, Lupo: 05/99-07/05, A2: 06/00-08/03, Ibiza & Cordoba: 05/05-12/05, Fabia: 04/03-10/05), (BAY:- Polo: 11/03-06/05, 11/14-) (BHC:- A2: 09/03-08/05)
- 59 kilowatts (80 PS; 79 bhp) @ 4,000 rpm; 195 newton metres (144 lbf·ft) @ 2,200 rpm — (BMS:- Polo BlueMotion: 05/06-, Ibiza & Cordoba: 06/06-, Roomster DPF: 07/06-, Fabia DPF/GreenLine: 01/07-) (BNV:- Polo: 04/05-05/08, Ibiza & Cordoba: 05/05-, Fabia: 10/05-, Roomster: 05/06-)
- 66 kilowatts (90 PS; 89 bhp) @ 4,000 rpm; 230 newton metres (170 lbf·ft) @ 1,900-2,300 rpm — (ATL:- VW Polo: 01/00-04/00, 11/14- ) (A2: 11/03-08/05)
- applications - actual
- Audi A1, Škoda Fabia, Škoda Roomster, Volkswagen Polo various models,
- applications - discontinued
- Audi A2, SEAT Arosa(51 kW), SEAT Ibiza, SEAT Córdoba, Volkswagen Lupo, Volkswagen Fox
- references
- "New Audi A2 1.4 TDI with 90 bhp engine". WorldCarFans.com. Audi AG. 10 November 2003. Retrieved 22 August 2009.
"New VW Fox in depth". WorldCarFans.com. Volkswagen AG. 4 April 2005. Retrieved 26 January 2010.
awards
- was winner of the "1.0-litre to 1.4-litre" category in the 2001 annual competition for International Engine of the Year
Four-cylinder diesels
- This section is about current four-cylinder diesel engines, for discontinued four-cylinder diesel engines, see list of discontinued Volkswagen Group diesel engines#Four-cylinder EA111 diesels, list of discontinued Volkswagen Group diesel engines#Four-cylinder EA827 diesels, and list of discontinued Volkswagen Group diesel engines#Four-cylinder MWM diesels.
EA827 diesels
The following are all part of the EA827 engine series, with a cylinder spacing between centres of 88 millimetres (3.46 in).
1.6 R4 16v TDI CR 55-85kW
- identification
- Motor type: EA 189 /parts code prefix: ???
- engine configuration & engine displacement
- inline four-cylinder (R4/I4) Turbocharged Direct Injection (TDI) turbodiesel; 1,598 cubic centimetres (97.5 cu in); bore x stroke: 79.5 by 80.5 millimetres (3.13 in × 3.17 in), stroke ratio: 0.99:1 - 'square engine', 399.5 cc per cylinder, compression ratio: 16.5:1
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft
- cylinder head & valvetrain
- cast aluminium alloy; four valves per cylinder, 16 valves total, double overhead camshaft (DOHC)
- aspiration
- turbocharger, intercooler, water-cooled exhaust gas recirculation (EGR)
- fuel system & engine management
- common rail (CR) direct injection (DI) with eight-nozzle output piezo element injectors, rail pressure up to 1,600 bars (23,210 psi), European EU5 emissions standard
- DIN-rated motive power & torque outputs, ID codes
- 55 kilowatts (75 PS; 74 bhp) @ 4,000 rpm; 195 newton metres (144 lbf·ft) @ 1,500-2,500 rpm — CAYA (Polo and Fabia only)
- 55 kilowatts (75 PS; 74 bhp) @ 3,000-4,000 rpm; 225 newton metres (166 lbf·ft) @ 1,500-2,250 rpm — CAYE (Caddy only)
- 66 kilowatts (90 PS; 89 bhp) @ 4,200 rpm; 230 newton metres (170 lbf·ft) @ 1,500-2,500 rpm — CAYB
- 75 kilowatts (102 PS; 101 bhp) @ 4,400 rpm; 250 newton metres (184 lbf·ft) @ 1,500-2,500 rpm — CAYD (Caddy only)
- 77 kilowatts (105 PS; 103 bhp) @ 4,400 rpm; 250 newton metres (184 lbf·ft) @ 1,500-2,500 rpm — CAYC
- 81 kilowatts (110 PS; 109 bhp) @ 3,200 rpm; 250 newton metres (184 lbf·ft) @ 1,500-3,000 rpm — CRKB (Golf, Golf SportsVan)
- 85 kilowatts (116 PS; 114 bhp) @ 4,400 rpm; 250 newton metres (184 lbf·ft) @ 2,000-2,500 rpm — CEKA (Mexico only)
- applications
- SEAT Ibiza Mk4, SEAT Ibiza Mk5, SEAT León Mk2, SEAT Altea, SEAT Altea XL, Škoda Fabia Mk2, Škoda Roomster, Škoda Octavia Mk2, Škoda Superb, Škoda Rapid (India), Volkswagen Polo Mk5, Volkswagen Golf Mk6, Volkswagen Golf Mk7, Volkswagen Golf Plus, Volkswagen Golf Variant, Volkswagen Touran, Audi A1, Audi A3, Volkswagen Caddy, Volkswagen Vento, Volkswagen Jetta, Volkswagen Passat (B6), Volkswagen Passat (B7)
- reference
- "VW presents new 1.2 litre TSI and 1.6 litre TDI engines for Golf and Polo". WorldCarFans.com. Volkswagen AG. 13 May 2009. Retrieved 28 December 2009.
1.9 R4 SD 36kW
This is a naturally aspirated (non-turbo) indirect injection version of the 1.9 SDI VE37
- identification
- parts code prefix: 028, ID code: 436
- engine configuration & engine displacement
- inline-four engine (R4/I4); 1,896 cubic centimetres (115.7 cu in); bore x stroke: 79.5 by 95.5 millimetres (3.13 in × 3.76 in), stroke ratio: 0.83:1 - undersquare/long-stroke, 474.1 cc per cylinder, compression ratio: 18,5:1
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 8 valves total, bucket tappets, single overhead camshaft (SOHC)
- aspiration
- cast aluminium alloy intake manifold, cast iron exhaust manifold
- fuel system & engine management
- Bosch VE 37 series distributor injection pump, indirect injection into swirl pre-chambers
- EWG-rated motive power & torque output
- 36 kilowatts (49 PS; 48 bhp) @ 3,000 rpm; 121 newton metres (89 lbf·ft) @ 1,800 rpm
- application
- Volkswagen Industrial Motor
- reference
- "Volkswagen SD 1.9 - 436 Industrial Engine" (PDF), mi-uk.com (Volkswagen AG), April 2006, retrieved 5 November 2009
1.9 R4 SDI 29-50kW
This is a naturally aspirated (non-turbo) Suction Diesel Injection version of the 1.9 TDI VE37
- identification
- parts code prefix: 028 or 038; ID codes: AGD, AGP, ASX, ASY, AYQ, AQM
- engine configuration & engine displacement
- inline four-cylinder (R4/I4) Suction Diesel Injection (SDI); 1,896 cubic centimetres (115.7 cu in); bore x stroke: 79.5 by 95.5 millimetres (3.13 in × 3.76 in), stroke ratio: 0.83:1 - undersquare/long-stroke, 474.1 cc per cylinder, compression ratio: 18.5:1 (44 kW - 18.5:1)
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 8 valves total, bucket tappets, single overhead camshaft (SOHC)
- aspiration
- cast aluminium alloy intake manifold, cast iron exhaust manifold
- fuel system & engine management
- Bosch VP37 (VerteilerPumpe) electronic distributor injection pump, direct injection (DI) with five-hole nozzles, Bosch EDC 15V+ electronic engine control unit (ECU)
- dimensions
- mass: 198 kilograms (437 lb) (dry weight, Marine variants)
- EWG-rated motive power & torque outputs, ID codes, application
- 30 kilowatts (41 PS; 40 bhp) @ 2,800 rpm;— BXT Volkswagen Industrial Motor 430 (05/06->)
- 44 kilowatts (60 PS; 59 bhp) @ 3,600 rpm; 130 newton metres (96 lbf·ft) @ 2,200 rpm — AEY Volkswagen Industrial Motor 444
- DIN-rated motive power & torque outputs, ID codes, applications
- 29 kilowatts (39 PS; 39 bhp) @ 2,600 rpm; 125 newton metres (92 lbf·ft) @ 2,000 rpm — BGM Volkswagen Marine 40-4 (02/03->)
- 33 kilowatts (45 PS; 44 bhp) — BEQ Volkswagen Marine (02/02->)
- 37 kilowatts (50 PS; 50 bhp) @ 3,000 rpm; 125 newton metres (92 lbf·ft) @ 2,000 rpm — BGL Volkswagen Marine 50-4 (02/03->)
- 44 kilowatts (60 PS; 59 bhp) @ 3,600 rpm; 125 newton metres (92 lbf·ft) @ 2,000 rpm — ANC Volkswagen Marine 60-4 (02/03->)
- 47 kilowatts (64 PS; 63 bhp) @ 4,200 rpm; 125 newton metres (92 lbf·ft) @ 1,600-2,800 rpm — ASY
- 50 kilowatts (68 PS; 67 bhp) @ 4,000 rpm; 133 newton metres (98 lbf·ft) @ 1,800 rpm — AQM
- applications
- VW Polo 6N/6KV (AEY: 12/95-08/99), VW Golf Mk3 & VW Golf Mk4 (AEY: 07/95-02/99), VW Vento (AEY: 07/95-12/97), VW Caddy Mk2 (AEY: 11/95-09/00), Škoda Fabia, SEAT Ibiza Mk2/SEAT Cordoba 6K (AEY: 09/95-06/99), SEAT León Mk1 (1M) (AQM: 06/00-10/03), SEAT Inca (AEY: 11/95-09/00)
- reference
- "The SDI 1.9 Industrial Engine" (PDF), mi-uk.com (Volkswagen AG), March 2005, retrieved 4 November 2009
"SDI 40-4 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"SDI 50-4 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"SDI 60-4 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
1.9 R4 TDI 29-81kW
- identification
- parts code prefix: 038, 064 (Volkswagen Marine)
- engine configuration & engine displacement
- inline four-cylinder (R4/I4) Turbocharged Direct Injection (TDI) turbodiesel; 1,896 cubic centimetres (115.7 cu in); bore x stroke: 79.5 by 95.5 millimetres (3.13 in × 3.76 in), stroke ratio: 0.83:1 - undersquare/long-stroke, 474.1 cc per cylinder, compression ratio: 19.5:1
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft, fracture-split forged steel connecting rods, Mahle or Alcan pistons, simplex roller chain-driven oil pump, cast aluminium alloy baffled oil sump
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 8 valves total, bucket tappets, timing belt-driven single overhead camshaft (SOHC)
- aspiration
- hot-wire mass air flow (MAF) sensor, cast aluminium alloy intake manifold, Garrett or KKK turbocharger, side-mounted intercooler (SMIC), exhaust gas recirculation (EGR), cast iron exhaust manifold
- fuel system & engine management
- timing belt-driven Bosch VP37 (VerteilerPumpe) electronic distributor injection pump, direct injection (DI) with five-hole nozzles, Bosch EDC 15V+ electronic engine control unit (Marine variant uses MDC)
- dimensions
- mass: 200 kilograms (441 lb) (Marine variants, dry weight)
- EWG-rated motive power & torque output, ID code, application
- 60 kilowatts (82 PS; 80 bhp) — AFD: Volkswagen Industrial Motor - 480 (04/94-01/02)
- DIN-rated motive power & torque outputs, ID codes
- 29 kilowatts (39 PS; 39 bhp) — CDX Volkswagen Marine (10/07->)
- 55 kilowatts (75 PS; 74 bhp) @ 3,600 rpm; 155 newton metres (114 lbf·ft) @ 2,000 rpm — CDX Volkswagen Marine (10/07->)
- 66 kilowatts (90 PS; 89 bhp) @ 4,000 rpm; 202 newton metres (149 lbf·ft) @ 1,900 rpm — 1Z, AHU
- 66 kilowatts (90 PS; 89 bhp) @ 3,750 rpm; 210 newton metres (155 lbf·ft) @ 1,900 rpm — AGR, AHH, ALE, ALH
- 81 kilowatts (110 PS; 109 bhp) @ 4,150 rpm; 235 newton metres (173 lbf·ft) @ 1,900 rpm — AFN, AHF, ASV, AVB, AVG
- applications
- Audi 8L A3 (Mk1) (AHU: 09/96-08/00, AHF: 01/97-04/02, ALH: 08/97-06/01, ASV: 09/99-06/01), Audi B4 80 (1Z: 09/91-07/95), Audi Cabriolet (1Z: 07/95-07/96, AHU: 07/96-08/00), Audi B5 A4 (1Z: 01/95-07/96, AFN: 02/96-07/99, AHU: 08/96-06/00, AHH: 04/97-09/01, AVG: 08/99-06/00), Audi C4 A6 (1Z: 07/94-06/96, AHU: 07/96-10/97), Audi C5 A6 (AFN: 04/97-04/01, AVG: 08/99-10/00)
- Ford Galaxy Mk1
- SEAT Ibiza Mk2 (1Z: 07/96-12/96, AHU: 12/96-06/99, AFN: 03/97-06/99, ASV: 03/99-05/02, AGR: 04/99-05/02, ALH: 10/99-05/02), SEAT Córdoba Mk1 (1Z: 07/96-12/96, AHU: 12/96-06/99, AFN: 03/97-06/99, ASV: 03/99-08/02, AGR: 04/99-08/02, ALH: 10/99-05/01), SEAT León 1M (Mk1) (ASV: 10/99-10/05, AGR/AHF: 11/99-09/02, ALH: 05/00-10/05), SEAT Toledo Мк1-Mk2 (1Z: 04/95-12/96, AHU: 06/96-03/99, AFN: 12/96-03/99, ALH: 03/99-07/04, AGR: 04/99-09/02, AHF: 10/98-09/02, ASV: 10/99-07/04), SEAT Alhambra (1Z: 03/96-07/96, AHU: 07/96-02/00, AFN/AVG: 09/97-02/00)
- Škoda Octavia 1U (Mk1) (AGR: 10/96->, AHF: 08/97->, ALH/ASV: 08/00->)
- Volkswagen Polo Mk3 Classic / Variant (AHU: 01/97-08/99, ALE: 11/97-08/99, AFN: 06/98-08/99, AGR/ALH/ASV: 10/99-09/01), Volkswagen Golf Mk3 (1Z: 07/93-07/96, AFN: 02/96-08/99, AHU: 07/96-06/00), VW Vento/Jetta Mk3 (1Z: 07/93-07/96, AFN: 02/96-12/97, ALE: 01/97-12/97, AHU: 08/96->), Volkswagen Golf Mk4 (ALE: 05/96-12/01, AHF: 10/97-05/06, AGR/ALH: 10/97->, ASV: 05/00-05/06), VW Bora/Jetta Mk4 (AHF/ALH: 09/98-05/05, AGR: 10/98-05/05, ALH: 11/98->, ASV: 05/00-05/05), Volkswagen New Beetle (ALH: 01/98-06/04), VW Passat B4 (1Z: 10/93-12/96), VW Passat B4 (AFN: 03/96-06/96), VW Passat B5 (AFN: 03/96-08/99, AHU: 08/96-08/00, AHH: 05/98-08/00, AVG: 08/99-08/00), Volkswagen Sharan (1Z: 09/95-07/96, AHU: 08/96-10/00, AFN: 12/96-07/99), Volkswagen Caddy (1Z: 10/96-03/97, AHU: 10/96-09/00, ALE: 09/97-09/00, ALH: 09/00-06/03)
- reference
- "TDI 75-4 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
1.9 R4 TDI PD 43-118kW
Essentially, this ubiquitous engine has the same bottom end (cylinder block/crankcase, crankshaft) as the earlier 1.9 R4 TDI which uses a VP37 VerteilerPumpe distributor injection pump. However, a new cylinder head is fitted to this "PD" engine, to accommodate "Pumpe Düse" Unit Injectors.
- identification
- parts code prefix: 038, 03G
(VAG group indicate higher output models by a red 'I' on their TDI badge, e.g. 96 kW model Audi B6 A4. Because of this, the term 'red I' has entered into automotive technicians parlance)
engine configuration & engine displacement: inline four-cylinder (R4/I4) Turbocharged Direct Injection (TDI) turbodiesel; 1,896 cubic centimetres (115.7 cu in); bore x stroke: 79.5 by 95.5 millimetres (3.13 in × 3.76 in), stroke ratio: 0.83:1 - undersquare/long-stroke, 474.1 cc per cylinder, compression ratio: 19.0:1
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft, fracture-split forged steel connecting rods, Mahle or Alcan pistons, simplex roller chain-driven oil pump, cast aluminium alloy baffled oil sump
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 8 valves total, bucket tappets, timing belt-driven single overhead camshaft (SOHC)
- aspiration
- hot-wire mass air flow (MAF) sensor, cast aluminium alloy intake manifold, Garrett, KKK or BorgWarner variable turbine geometry turbocharger (VGT), side-mounted intercooler (SMIC), water-cooled exhaust gas recirculation (EGR), cast iron exhaust manifold
- fuel system & engine management
- Pumpe Düse (PD) direct injection (DI): engine-driven vane-type low-pressure fuel lift pump, four camshaft-actuated (via roller rocker arms) high-pressure Bosch 1,920 bars (27,850 psi) Unit Injectors with solenoid valve injection nozzles, Bosch EDC 16 or EDC 17 electronic engine control unit (ECU) with altitude compensation
- EWG-rated motive power & torque outputs, ID codes, applications
- 43 kilowatts (58 PS; 58 bhp) — BEU: Volkswagen Industrial Motor (11/02->)
- 53 kilowatts (72 PS; 71 bhp) — BJC: Volkswagen Industrial Motor (11/03->)
- 63 kilowatts (86 PS; 84 bhp) — AVM: Volkswagen Industrial Motor (11/00->)
- DIN-rated motive power & torque outputs, ID codes, applications
- 55 kilowatts (75 PS; 74 bhp) @ 4,000 rpm; 210 newton metres (155 lbf·ft) @ 1,900 rpm — BSU
- Volkswagen Caddy Mk3 (09/05->)
- 66 kilowatts (90 PS; 89 bhp) @ 4,000 rpm; 210 newton metres (155 lbf·ft) @ 1,800−2,500 rpm — BRU, BXF, BXJ
- SEAT Ibiza Mk4 (BXJ: 06/08->), SEAT León 1P (Mk2) (BXF: 06/07->), SEAT Altea (BXF: 08/09->), Volkswagen Golf Mk5 (BRU: 05/04-02/06, BXF: 02/06-11/08, BXJ: 11/07-11/08), VW Golf Plus (BXF: 05/07-12/08, BXJ: 11/07-12/08), Volkswagen Touran (BRU: 11/04-02/06, BXF: 02/06->, BXJ: 06/06->)
- 66 kilowatts (90 PS; 89 bhp) @ 4,000 rpm; 240 newton metres (177 lbf·ft) @ 1,900 rpm — ANU
- Ford Galaxy, SEAT Alhambra (06/00->), Volkswagen Sharan (03/99->)
- 74 kilowatts (101 PS; 99 bhp) @ 4,000 rpm; 240 newton metres (177 lbf·ft) @ 1,800–2,400 rpm — ATD, AXR, BEW, BMT
- Audi 8L A3 (Mk1) (ATD: 01/01-06/03, AXR: 11/01-06/03), SEAT Ibiza Mk3 (ATD: 09/01->, AXR: 05/05-11/09, BMT: 09/06-11/09), SEAT Córdoba Mk2 (ATD: 09/02->, AXR: 05/05->, BMT: 06/06-11/09), SEAT León 1M (Mk1) (AXR: 10/05-06/06), Škoda Fabia 6Y (Mk1) (ATD: 01/00-10/05, AXR: 10/05-12/07), Škoda Roomster (AXR: 03/06-05/06), Škoda Octavia 1U (Mk1) (ATD: 08/00-01/06, AXR: 10/05->), Volkswagen Polo Mk4 (ATD/AXR: 11/01->, BMT: 05/06->), Volkswagen Golf Mk4 (ATD: 02/00-06/06, AXR: 05/01-06/06), VW Bora/Jetta Mk4 (ATD: 05/00-05/06, AXR: 05/01-??/??, BEW: 07/03-??/??), Volkswagen Golf Mk5 (BEW: 08/03-??/??), VW Jetta Mk5 (AXR: 06/07-??/??), Volkswagen New Beetle (ATD: 10/00-??/??, AXR: 06/03-??/??, BEW: 07/03-??/??)
- 74 kilowatts (101 PS; 99 bhp) @ 4,000 rpm; 250 newton metres (184 lbf·ft) @ 1,900 rpm — AVB, AVQ
- Audi B6 A4 (AVB: 04/01-05/04), Škoda Superb 3U (Mk1) (AVB: 06/02-10/05), Volkswagen Touran (AVQ: 02/03-05/04), VW Passat B5 (AVB: 02/00-05/05)
- 77 kilowatts (105 PS; 103 bhp) @ 4,000 rpm; 240 newton metres (177 lbf·ft) @ 1,800 rpm — BSW
- Škoda Fabia 5J (Mk2) (04/07->), Škoda Roomster (05/06->), Volkswagen New Beetle (07/03->)
- 77 kilowatts (105 PS; 103 bhp) @ 4,000 rpm; 250 newton metres (184 lbf·ft) @ 1,900 rpm — BJB, BKC, BLS, BSV, BXE
- Audi 8P A3 (Mk2) (BKC: 06/03-05/06, BLS: 10/05-05/10, BXE: 06/06-05/10), SEAT Ibiza 6J (Mk4) (BLS: 02/08->), SEAT León 1P (Mk2) (BKC: 07/05-02/06, BLS: 11/05->, BXE: 02/06->), SEAT Altea (BJB: 04/04-09/05, BKC: 04/04-05/06, BLS: 10/05->, BXE: 02/06->), SEAT Toledo Mk3 (BJB: 09/04-09/05, BKC: 09/04-02/06, BLS: 10/05-09/09, BXE: 02/06->), Škoda Fabia 5J (Mk2) (BLS: 04/07->), Škoda Roomster (BLS: 11/06->), Škoda Octavia 1Z (Mk2) (BJB: 02/04->, BKC: 05/04-02/06, BXE: 03/06->, BLS: 05/06->), Škoda Superb 3U (Mk1) (BSV: 10/05-05/07, BLS/BXE: 03/08->), Volkswagen Golf Mk5 (BKC: 10/03-07/07, BLS: 06/05->, BXE: 05/07->), VW Jetta Mk5 (BKC: 05/05-??/09, BLS: 08/05-??/09, BXE: 02/06-??/09), VW Golf Plus (BLS: 05/07-12/08, BXE: 05/07-01/09), Volkswagen Touran (BKC: 08/03-02/06, BLS: 06/05->, BXE: 02/06->), VW Passat B6 (BKC: 03/05-02/06, BLS: 06/05-11/08, BXE: 02/06-11/08), Volkswagen Caddy Mk3 (BJB: 02/04->, BLS: 06/05->)
- 85 kilowatts (116 PS; 114 bhp) @ 4,000 rpm; 250 newton metres (184 lbf·ft) @ 1,900 rpm — BPZ
- Škoda Superb 3U (Mk1) (01/07-03/08), VW Passat B6 (04/08->)
- 85 kilowatts (116 PS; 114 bhp) @ 4,000 rpm; 285 newton metres (210 lbf·ft) @ 1,900 rpm — AJM
- Audi B5 A4 (08/98-09/01), Audi C5 A6 (01/98-04/01), Volkswagen Golf Mk4 (05/99-04/02), VW Bora/Jetta Mk4 (11/98-07/01), VW Passat B5 (01/99-12/99)
- 85 kilowatts (116 PS; 114 bhp) @ 4,000 rpm; 310 newton metres (229 lbf·ft) @ 1,900 rpm — ATJ, AUY, BVK
- Audi B5 A4 (ATJ: 01/00-09/01), Ford Galaxy Mk1, SEAT Alhambra (AUY: 06/00->, BVK: 11/05-05/08), Volkswagen Golf Mk4 (AUY: 01/00-07/01), VW Bora/Jetta Mk4 (AUY: 05/00-07/01), VW Passat B5 (ATJ: 01/00-08/00), Volkswagen Sharan (AUY: 04/00->, BVK: 11/05->)
- 96 kilowatts (131 PS; 129 bhp) @ 4,000 rpm; 285 newton metres (210 lbf·ft) @ 1,750–2,500 rpm — AWX
- Audi B6 A4 (12/00-06/03), Audi C5 A6 (06/01-01/05), Škoda Superb 3U (Mk1) (12/01-03/08), VW Passat B5 (10/00-05/05)
- 96 kilowatts (131 PS; 129 bhp) @ 4,000 rpm; 310 newton metres (229 lbf·ft) @ 1,900 rpm — ASZ, AVF, BLT
- Audi 8L A3 (Mk1) (ASZ: 05/00-06/03), Audi B6 A4 (AVF: 11/00-12/04), Audi C5 A6 (AVF: 06/01-01/05), Ford Galaxy Mk1, SEAT Ibiza Mk3 (ASZ: 11/01->, BLT: 05/05-07/09), SEAT Córdoba Mk2 (ASZ: 10/02->, BLT: 05/05->), SEAT León Mk1 (1M) (ASZ: 05/03-06/06), SEAT Toledo Mk2 (ASZ: 05/03-06/06), SEAT Alhambra (ASZ: 11/02->), Škoda Fabia Mk1 (6Y) (ASZ: 06/03-10/05, BLT: 10/05-04/07), Škoda Octavia 1U (Mk1) (ASZ: 09/02-09/04), Škoda Superb 3U (Mk1) (AVF: 01/04-03/08), Volkswagen Polo Mk4 (ASZ: 11/03->, BLT: 05/04->), Volkswagen Golf Mk4 (ASZ: 04/01-05/06), VW Bora/Jetta Mk4 (ASZ: 04/01-05/05), VW Passat B5 (AVF: 10/00-05/05), Volkswagen Sharan (ASZ: 11/02->)
- 110 kilowatts (150 PS; 148 bhp) @ 4,000 rpm; 320 newton metres (236 lbf·ft) @ 1,900 rpm — ARL, BTB
- Ford Galaxy Mk1, SEAT León Mk1 (1M) (ARL: 09/00-12/05), SEAT Toledo Mk2 (ARL: 10/00-07/04), SEAT Alhambra (BTB: 06/05-05/07), Volkswagen Golf Mk4 (ARL: 09/00-05/06), VW Bora/Jetta Mk4 (ARL: 09/00-05/05), Volkswagen Sharan (BTB: 01/05-05/07)
- 118 kilowatts (160 PS; 158 bhp) @ 3,750 rpm; 330 newton metres (243 lbf·ft) @ 1,900 rpm — BPX, BUK
- SEAT Ibiza Mk3 (BPX: 03/04->, BUK: 11/05-12/08) (engine exclusively developed by Audi for SEAT Sport)
- reference
- 1.9 litre TDI engine with Pump Düse (PDF), Auburn Hills, MI 48326, USA: Volkswagen of America, Inc, October 2003, Self-Study Program - Course Number 841303, retrieved 4 November 2009
awards
- was winner of the "1.8-litre to 2.0-litre" category in the 1999 annual competition for International Engine of the Year
Origins: All 1968 ccm four cylinder engines are derived from the 2461 ccm 5 cylinder Audi- engine, VW just cut off one 492,1 ccm cylinder.
2.0 R4 SDI PD 51-55kW
- Origins
- Motor type: EA 188 / All R4 1968 ccm four cylinder engines are derived from the R5 2461 ccm 5 cylinder Audi- engine, VW just cut off one 492,1 ccm cylinder.
- identification
- parts code prefix: ???
- engine configuration & engine displacement
- inline four-cylinder (R4/I4) Suction Diesel Injection (SDI); 1,968 cubic centimetres (120.1 cu in), bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long stroke, 492.1 cc per cylinder, compression ratio: 19.0:1
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 8 valves total, timing belt driven single overhead camshaft (SOHC)
- fuel system & engine management
- Pumpe Düse (PD) Unit Injector direct injection (DI)
- DIN-rated motive power & torque outputs, ID codes
- 51 kilowatts (69 PS; 68 bhp) @ 4,200 rpm; 140 newton metres (103 lbf·ft) @ 2,200–2,400 rpm — Volkswagen Caddy Mk3: BDJ, BST
- 55 kilowatts (75 PS; 74 bhp) @ 4,200 rpm; 140 newton metres (103 lbf·ft) @ 2,200–2,400 rpm — Volkswagen Golf Mk5: BDK
2.0 R4 8v TDI PD 47-103kW
- identification
- Motor type: EA 188 / parts code prefix: ???
- engine configuration & engine displacement
- inline four-cylinder (R4/I4) Turbocharged Direct Injection (TDI) turbodiesel; 1,968 cubic centimetres (120.1 cu in); bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder; compression ratio: 18.5:1
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft, fracture-split forged steel connecting rods
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 8 valves total, timing belt driven single overhead camshaft (SOHC)
- aspiration
- turbocharger, intercooler
- fuel system & engine management
- Pumpe Düse (PD) direct injection (DI): engine-driven vane-type low-pressure fuel lift pump, four camshaft-actuated (via roller rocker arms) high-pressure Bosch 2,200–2,400 bars (31,910–34,810 psi) Unit Injectors with solenoid valve injection nozzles, Bosch EDC 16 or EDC 17 or Siemens VDO SIMOS PPD1 electronic engine control unit (ECU) with altitude compensation, EU4 compliant
- exhaust system
- diesel particulate filter (DPF) (not on Industrial variants)
- EWG-rated motive power & torque outputs, ID codes, applications
- 47 kilowatts (64 PS; 63 bhp) @ 3,000 rpm; 200 newton metres (148 lbf·ft) @ 1,750 rpm — Volkswagen Industrial Motor - 447 (CBH: 05/07->)
- 55 kilowatts (75 PS; 74 bhp) — Volkswagen Industrial Motor - 455 (CBJ: 05/07->)
- 63 kilowatts (86 PS; 84 bhp) @ 3,000 rpm; 250 newton metres (184 lbf·ft) @ 1,750 rpm — Volkswagen Industrial Motor - 463
- 74 kilowatts (101 PS; 99 bhp) @ 3,000 rpm; 285 newton metres (210 lbf·ft) @ 1,750 rpm — Volkswagen Industrial Motor - 474 (CBK: 01/07->)
- DIN-rated motive power & torque outputs, ID codes
- 100 kilowatts (136 PS; 134 bhp) @ 4,000 rpm; 310 newton metres (229 lbf·ft) @ 1900 rpm — BGW, BHW
- 103 kilowatts (140 PS; 138 bhp) @ 4,000 rpm; 320 newton metres (236 lbf·ft) @ 1,750-2500 rpm — BMM, BMP
- applications
- Volkswagen Passat B5, Volkswagen Golf Mk5, VW Jetta Mk5, Volkswagen Touran, Volkswagen Tiguan, VW Passat B6, Audi 8P A3, Audi B7 A4, Audi B8 A4, Audi C6 A6, SEAT Leon, SEAT Altea and XL, SEAT Toledo, Škoda Octavia, Volkswagen Industrial Motor, Chrysler Sebring, Chrysler Sebring (convertible), Dodge Avenger, Dodge Caliber (MY07 BKD, MY08 BMR), Dodge Journey, Jeep Compass, Mitsubishi Lancer, Mitsubishi Grandis, Mitsubishi Outlander
- references
- "New VW Passat in depth". WorldCarFans.com. Volkswagen AG. 4 March 2005. Retrieved 6 November 2009.
"The new TDI 2.0 Industrial Engines" (PDF), mi-uk.com (Volkswagen AG), April 2007, retrieved 6 November 2009
2.0 R4 16v TDI PD 103-125 kW
Some models are fitted with a diesel particulate filter. According to Audi (UK) 'TDV' stands for Technology Development Vehicle. TDV denotes that a diesel particulate filter is present on the Audi in question but the vehicle was produced just prior to (or during) the legislation process regarding DPF's. The abbreviation 'DPF' was not yet officially in existence so Audi used the 'TDV' letters to identify the diesel particulate filter. This Pumpe Düse (PD) TDI engine was introduced to replace the older higher-powered versions of the 1.9 TDI. It is the first four-cylinder 16-valve double overhead camshaft (DOHC) Turbocharged Direct Injection (TDI) engine made by Volkswagen Group.
- identification
- Motor type: EA 188 / parts code prefix: 038
- engine configuration & engine displacement
- inline four-cylinder (R4/I4) Turbocharged Direct Injection (TDI) turbodiesel; 1,968 cubic centimetres (120.1 cu in); bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder; compression ratio: 18.5:1
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft, fracture-split forged steel connecting rods, cast aluminium alloy oil sump
- cylinder head & valvetrain
- cast aluminium alloy; four valves per cylinder, 16 valves total, timing belt-driven double overhead camshaft (DOHC)
- aspiration
- hot-film air mass meter, Garrett turbocharger integrated into cast iron exhaust manifold, sandwiched central front-mounted intercooler (FMIC)
- fuel system & engine management
- Pumpe Düse (PD) direct injection (DI): engine-driven vane-type low-pressure fuel lift pump, four camshaft-actuated (via roller rocker arms) high-pressure 2,200–2,400 bars (31,910–34,810 psi) Unit Injectors with piezo valve injection nozzles (Siemens VDO on 125 kW, Bosch on 103 kW), Bosch EDC 16 or EDC 17 or Siemens VDO SIMOS PPD1 electronic engine control unit (ECU) with altitude compensation, EU4 compliant
- exhaust system
- water-cooled exhaust gas recirculation (EGR), diesel particulate filter (DPF) (only on 125 kW and TDV (Technology Development Vehicle) denoted models )
- DIN-rated motive power & torque outputs, ID codes
- 100 kilowatts (136 PS; 134 bhp) — AZV, BMA
- 103 kilowatts (140 PS; 138 bhp) — BKD, BKP, BRE
- 125 kilowatts (170 PS; 168 bhp) @ 4,200 rpm; 350 newton metres (258 lbf·ft) @ 1,800-2,500 rpm — BMN, BMR, BRD...
- applications
- Audi 8P A3, Audi B7 A4, Audi B8 A4, Audi C6 A6, Jeep Patriot 2.0CRD (BKD: 09/07) SEAT León Mk2, Škoda Octavia (BKD: 11/08->), Škoda Superb (BKD: 01/09->), Volkswagen Golf Mk5, VW Jetta Mk5, Volkswagen Touran, VW Passat B6
- reference
- "New VW Passat in depth". WorldCarFans.com. Volkswagen AG. 4 March 2005. Retrieved 6 November 2009.
"Self study programme 352: Unit Injectors with piezo valves - Design and function" (PDF). Volkswagen AG.
"Self study programme 316: The 2.0 ltr. TDI engine" (PDF). Volkswagen AG.
2.0 R4 16v TDI CR 81-176kW
The EA189 engine is the focus of the Volkswagen emissions scandal.[17]
- identification
- Motor type: EA189 / parts code prefix: 03L, ID codes: CAGA, CAGC, CAHA, CBEA, CBAB, CFFB, CBBB, CBDB, CBDC, CEGA, CFGB, CFCA, CFJB, CJAA, CLJA
- Motor type: EA288[18]
- engine configuration & engine displacement
- inline four-cylinder (R4/I4) Turbocharged Direct Injection (TDI) turbodiesel; 1,968 cubic centimetres (120.1 cu in); bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder, compression ratio: 18:1 (103 kW), 16.5:1 (125 kW)
- cylinder block & crankcase
- grey cast iron; five main bearings, die-forged steel crankshaft, fracture-split forged steel connecting rods, two counter-rotating gear-driven balance shafts turning at half crankshaft speed, Alcan or Federal-Mogul pistons, cast aluminium alloy oil sump
- cylinder head & valvetrain
- cast aluminium alloy; four valves per cylinder, 16 valves total, low-friction roller finger cam followers with automatic hydraulic valve clearance compensation, timing belt and gear-driven (relay method: belt drives exhaust camshaft from front of engine, inlet camshaft is driven at rear of engine by gear from exhaust camshaft) double overhead camshaft (DOHC)
- aspiration
- hot-film air mass meter, electronically regulated variable geometry turbocharger integrated into cast iron exhaust manifold, central front-mounted intercooler (FMIC)
- aspiration (147 kW)
- twin registered turbochargers with different diameters
- fuel system & engine management
- low-pressure fuel tank mounted fuel lift pump with underfloor electric fuel relay pump, timing belt-driven high-pressure injection pump delivering up to 1,850-bar (26,830 psi) pressure for the common rail (CR) fuel rail, direct injection (DI) with eight-nozzle output piezo fuel injectors; Bosch EDC 17 electronic engine control unit (ECU)
- exhaust system
- water-cooled exhaust gas recirculation (EGR), catalytic converter, diesel particulate filter (DPF), nitrogen oxide catalytic converter, sulphur catalytic converter.[19]
- DIN-rated motive power & torque outputs, ID codes, applications
- 81 kilowatts (110 PS; 109 bhp) @ 4,200 rpm; 250 newton metres (184 lbf·ft) @ 1,500–2,500 rpm — CBDC
- 88 kilowatts (120 PS; 118 bhp) @ 4,000 rpm; 290 newton metres (214 lbf·ft) @ 1,750–2,500 rpm — CAGC SEAT Exeo (09/09->)
- 100 kilowatts (136 PS; 134 bhp) — CAGB(AUDI A6 C6 CR)
- 103 kilowatts (140 PS; 138 bhp) @ 3,750-4,150 rpm; 320 newton metres (236 lbf·ft) @ 1,750–2,800 rpm — CFHC, CBEA, CBAB, CFFB, CBDB, CJAA Volkswagen Golf Mk6
- 105 kilowatts (143 PS; 141 bhp) @ 4,200 rpm; 320 newton metres (236 lbf·ft) @ 1,750–2,500 rpm — Audi B8 A4, Audi Q5, SEAT Exeo (CAGA: 12/08->)
- 110 kilowatts (150 PS; 148 bhp) @ 3,500 rpm; 320 newton metres (236 lbf·ft) @ 1,750–3,000 rpm — CRBC Audi A3, Golf VII, SEAT Leon
- 125 kilowatts (170 PS; 168 bhp) @ 4,200 rpm; 350 newton metres (258 lbf·ft) @ 1,750–2,500 rpm — CBBB VW passat cc, CFGB Audi TT 2.0 TDI quattro, Audi 8P A3, Volkswagen Golf Mk6, Škoda Octavia RS TDI (CEGA: 2008->), SEAT Exeo (CAHA: 02/09->), CEGA SEAT Leon
- 130 kilowatts (177 PS; 174 bhp) @ 4,200 rpm; 380 newton metres (280 lbf·ft) @ 1,750–2,500 rpm— CGLC Audi A4, Audi A5, Audi A6, CFJB Volkswagen Touran
- 132 kilowatts (179 PS; 177 bhp) @ 4,000 rpm; 400 newton metres (295 lbf·ft) @ 1,500–2,000 rpm — CFCA Volkswagen Transporter (T5) GP biturbo
- 135 kilowatts (184 PS; 181 bhp) @ 4,000 rpm; 380 newton metres (280 lbf·ft) @ 1,750–3,000 rpm — CUNA Audi A3, Golf VII, SEAT Leon
- 140 kilowatts (190 PS; 188 bhp) @ 3,800 rpm; 400 newton metres (300 lbf·ft) — CNHA Audi B8 A4, Volkswagen Passat 2015[20]
- 176 kilowatts (239 PS; 236 bhp) @ 4,000 rpm; 500 newton metres (369 lbf·ft) — CUAA Volkswagen Passat 2015 TDI BiTurbo[20]
- applications
- Audi TT Mk2 2.0 TDI quattro (CBBB: 06/08-05/10), Audi 8P A3 (CBBB: 07/08->), Audi B8 A4, Audi Q5, SEAT Leon Mk2 (1P), SEAT Altea, SEAT Toledo Mk3 (5P), SEAT Exeo, Škoda Octavia Mk2 (1Z) (125 kW), Škoda Superb Mk2 (3T) (103/125 kW), Škoda Yeti (81/103/125 kW), Volkswagen Golf Mk6, VW Jetta Mk5 TDI CleanDiesel (103 kW), Volkswagen Tiguan, Volkswagen Passat CC, Volkswagen Passat, Volkswagen Transporter (T5)
- references
- "50 mpg-plus Audi diesel sports car cleans up in Geneva". Audi.co.uk. Audi UK. 28 February 2008. Retrieved 4 January 2010.
"Audi's new TT TDI is going on sale this spring in Europe". Green.AutoBlog.com. AUDI AG. 28 April 2008. Retrieved 4 January 2010.
Five-cylinder diesels
- This section is about current five-cylinder diesel engines, for discontinued five-cylinder diesel engines, see list of discontinued Volkswagen Group diesel engines#Five-cylinder diesels.
2.5 R5 SDI 40-55kW
- identification
- parts code prefix: ???
- engine configuration & engine displacement
- inline five-cylinder (R5) Suction Diesel Injection (SDI); 2,461 cubic centimetres (150.2 cu in); bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder, compression ratio: 19.0:1
- cylinder block & crankcase
- grey cast iron; six main bearings, die-forged steel crossplane crankshaft, 'bowl in piston' combustion chamber
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 10 valves total, hydraulic bucket tappets with automatic valve clearance compensation, timing belt-driven single overhead camshaft (SOHC), swirl-inducing intake ports
- aspiration
- cast aluminium alloy intake manifold, cast iron exhaust manifold (water-cooled in marine applications)
- fuel system & engine management
- rubber toothed belt-driven Bosch VP37 (German: VerteilerPumpe) electronic distributor injection pump, two-stage direct injection (DI) with five-hole injector nozzles; Bosch MDC Marine Diesel Control electronic engine control unit
- mass
- 245 kilograms (540 lb) (Marine versions: dry weight, with DMF, all ancillaries and cooling system)
- DIN-rated (Marine to ISO 8178-4) motive power & torque outputs, applications, ID codes
- 40 kilowatts (54 PS; 54 bhp) @ 2,500 rpm (16.3 kW/L); 155 newton metres (114 lbf·ft) @ 2,250 rpm — Volkswagen Marine SDI 55-5 (BCT: 02/02-on)
- 55 kilowatts (75 PS; 74 bhp) @ 3,600 rpm (22.3 kW/L); 155 newton metres (114 lbf·ft) @ 2,250 rpm — Volkswagen Marine SDI 75-5 (ANF: 02/02-on)
- 55 kilowatts (75 PS; 74 bhp) (22.3 kW/L); 160 newton metres (118 lbf·ft) @ 2,250 rpm — Volkswagen LT (LT28 & LT35) (AGX: 05/96-04/01)
- references
- "Boat engines from Volkswagen Marine - Self-study programme M001 - Design and function" (PDF). www.vw-m.de. Volkswagen AG. April 2001. Retrieved 18 February 2010.
"SDI 55-5 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"SDI 75-5 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
2.5 R5 TDI 65-121kW
This 2.5-litre 'row' five engine (R5), wholly designed and developed by Audi, was the first Turbocharged Direct Injection (TDI) diesel engine in 1989, initially used in the Audi 100. This engine was also used in some Volvo Cars models in the 1990s.
- identification
- parts code prefix: ???, ID codes: AAT, ACV, AEL, AHY, AJT, ANG, ANH, ANJ, AXG, BBR, BCU, BCV, BTW, Volvo D5252T
- engine configuration & engine displacement
- inline five-cylinder (R5) Turbocharged Direct Injection (TDI) turbodiesel; 2,461 cubic centimetres (150.2 cu in); bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder, compression ratio: 19.0:1
- cylinder block & crankcase
- grey cast iron; six main bearings, die-forged steel crossplane crankshaft, 'bowl in piston' combustion chamber
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 10 valves total, hydraulic bucket tappets with automatic valve clearance compensation, timing belt-driven single overhead camshaft (SOHC), swirl-inducing intake ports
- aspiration
- cast aluminium alloy intake manifold, cast iron exhaust manifold (water-cooled in marine applications), Garrett Variable Turbine Geometry (VTG) variable-vane turbocharger (water-cooled in marine applications), sea-water intercooler on Marine 108 kW and above
- fuel system & engine management
- rubber toothed belt-driven Bosch VP37 (German: VerteilerPumpe) electronic distributor injection pump, two-stage direct injection (DI) with five-hole injector nozzles, Bosch MDC Marine Diesel Control electronic engine control unit
- mass
- Marine variants: 255–265 kilograms (562–584 lb) (dry weight, with DMF, all ancillaries and cooling system)
- EWG-rated motive power & torque outputs, application, ID code
- 80 kilowatts (109 PS; 107 bhp) (32.5 kW/L) — Volkswagen Industrial Motor (BBR: 07/92->)
- DIN-rated motive power & torque outputs, applications, ID codes
- 65 kilowatts (88 PS; 87 bhp) (26.4 kW/L); 195 newton metres (144 lbf·ft) @ 1,900 rpm — Volkswagen Transporter (T4)
- 74 kilowatts (101 PS; 99 bhp) @ 2,600 rpm (30.1 kW/L); 275 newton metres (203 lbf·ft) @ 2,500 rpm — Volkswagen Marine TDI 100-5 (BCU: 02/02->)
- 75 kilowatts (102 PS; 101 bhp) (30.5 kW/L); 250 newton metres (184 lbf·ft) @ 1,900 rpm — Volkswagen Transporter (T4)
- 80 kilowatts (109 PS; 107 bhp) (32.5 kW/L); 280 newton metres (207 lbf·ft) @ 1,900 rpm — Volkswagen LT
- 85 kilowatts (116 PS; 114 bhp) (34.5 kW/L); 265 newton metres (195 lbf·ft) @ 1,900 rpm — Audi C3 100, Audi C4 100
- 88 kilowatts (120 PS; 118 bhp) @ 3,250 rpm (35.8 kW/l); 275 newton metres (203 lbf·ft) @ 2,500 rpm — Volkswagen Marine TDI 120-5 (ANG: 02/02->)
- 103 kilowatts (140 PS; 138 bhp) (41.9 kW/L); 290 newton metres (214 lbf·ft) @ 1,900 rpm — 1994 Audi C4 100, Audi C4 A6, as Volvo D5252T: Volvo 850, Volvo S70, Volvo V70, early Volvo S80s
- 108 kilowatts (147 PS; 145 bhp) @ 4,000 rpm (43.9 kW/L); 310 newton metres (229 lbf·ft) @ 1,900 rpm — Volkswagen Marine TDI 150-5D (BCV: 02/02->)
- 111 kilowatts (151 PS; 149 bhp) (45.1 kW/L); 295 newton metres (218 lbf·ft) @ 1,900 rpm — Volkswagen Transporter (T4) (AHY, AXG: xx/98-xx/03)
- 111 kilowatts (151 PS; 149 bhp) @ 3,500 rpm (45.1 kW/L); 310 newton metres (229 lbf·ft) @ 1,700-3,100 rpm — Volkswagen Marine TDI 140-5 (???: ??/??->)
- 111 kilowatts (151 PS; 149 bhp) @ 4,000 rpm (45.1 kW/L); 310 newton metres (229 lbf·ft) @ 2,500 rpm — Volkswagen Marine TDI 150-5 (ANH: 02/02->)
- 121 kilowatts (165 PS; 162 bhp) @ 4,000 rpm (49.2 kW/L); 310 newton metres (229 lbf·ft) @ 2,500 rpm — Volkswagen Marine TDI 165-5 (BTW: 04/05-on)
- references
- "Boat engines from Volkswagen Marine - Self-study programme M001 - Design and function" (PDF). www.vw-m.de. Volkswagen AG. April 2001. Retrieved 18 February 2010.
"TDI 100-5 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"TDI 120-5 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"TDI 140-5 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"TDI 150-5 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"TDI 165-5 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
2.5 R5 TDI CR 65-120kW
- identification
- parts code prefix: ???, ID codes: ???
- engine configuration & engine displacement
- inline five-cylinder (R5) Turbocharged Direct Injection (TDI) turbodiesel; 2,461 cubic centimetres (150.2 cu in); bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder, compression ratio: 18.0:1
- cylinder block & crankcase
- grey cast iron GG350; six main bearings, die-forged steel crossplane crankshaft, 'bowl in piston' combustion chamber
- cylinder head & valvetrain
- cast aluminium alloy; two valves per cylinder, 10 valves total, hydraulic bucket tappets with automatic valve clearance compensation, timing belt-driven single overhead camshaft (SOHC), swirl-inducing intake ports
- aspiration
- turbocharger, intercooler; 80 kW and higher: Variable Turbine Geometry (VTG) variable-vane turbocharger
- fuel system & engine management
- common rail (CR) direct injection pump, pressure up to 1,600 bar; Bosch EDC16 electronic engine control unit (ECU)
- exhaust system
- diesel particulate filter (DPF)
- DIN-rated motive power & torque outputs
- 65 kilowatts (88 PS; 87 bhp) @ 3,500 rpm; 220 newton metres (162 lbf·ft) @ 2,000 rpm
- 80 kilowatts (109 PS; 107 bhp) @ 3,500 rpm; 280 newton metres (207 lbf·ft) @ 2,000 rpm
- 100 kilowatts (136 PS; 134 bhp) @ 3,500 rpm; 320 newton metres (236 lbf·ft) @ 2,000 rpm
- 120 kilowatts (163 PS; 161 bhp) @ 3,500 rpm; 350 newton metres (258 lbf·ft) @ 2,000 rpm
- application
- Volkswagen Crafter
- reference
- "Volkswagen Crafter - Engine specification". Volkswagen-Vans.co.uk. Volkswagen Commercial Vehicles. Retrieved 11 November 2009.
2.5 R5 TDI PD 96-128kW
- identification
- parts code prefix: AXD, ID codes: AXE
- engine configuration & engine displacement
- inline five-cylinder (R5) Turbocharged Direct Injection (TDI) turbodiesel; 2,461 cubic centimetres (150.2 cu in); bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder, compression ratio: 18.0:1
- cylinder block & crankcase
- aluminum alloy; six main bearings, die-forged steel 5-throw crankshaft, 'bowl in piston' combustion chamber
- cylinder head & valvetrain
- cast aluminum alloy; two valves per cylinder, 10 valves total, hydraulic bucket tappets with automatic valve clearance compensation, gear-driven single overhead camshaft (SOHC), swirl-inducing intake ports
- aspiration
- Variable Turbine Geometry (VTG) variable-vane turbocharger, intercooler
- fuel system & engine management
- camshaft-actuated Bosch Pumpe Düse Unit Injector direct injection
- DIN-rated motive power & torque outputs
- 96 kilowatts (131 PS; 129 bhp) — Volkswagen Transporter (T5)
- 128 kilowatts (174 PS; 172 bhp) @ 3,500 rpm; 400 newton metres (295 lbf·ft) @ 2,000 rpm
- applications
- Volkswagen Touareg, Volkswagen Transporter (T5)
8.9 EU4 169-228kW (Scania)
- engine configuration & engine displacement
- inline five-cylinder, turbodiesel; 8.9 litres (543 cu in)
- aspiration
- turbocharger, intercooler
- fuel system & engine management
- Scania PDE (German: Pumpe-Düse-Einspritzung) high-pressure Unit Injector direct injection system, exhaust gas recirculation, Euro4 compliant
- DIN-rated motive power & torque outputs
- 169 kilowatts (230 PS; 227 bhp) @ 1,800 rpm; 1,050 newton metres (774 lbf·ft) @ 1,100-1,500 rpm
- 198 kilowatts (269 PS; 266 bhp) @ 1,800 rpm; 1,150 newton metres (848 lbf·ft) @ 1,100-1,450 rpm
- 228 kilowatts (310 PS; 306 bhp) @ 1,800 rpm; 1,550 newton metres (1,143 lbf·ft) @ 1,100-1,350 rpm
- applications
- Scania trucks
- reference
- "Scania Euro4, 9-litre". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
9.3 EU5 169-235kW (Scania)
- engine configuration & engine displacement
- inline five-cylinder, turbodiesel; 9.3 litres (568 cu in)
- aspiration
- Variable Turbine Geometry (VTG) variable-vane turbocharger, intercooler
- fuel system & engine management
- Cummins / Scania XPI extra-high-pressure common rail direct injection, exhaust gas recirculation, diesel particulate filter, Euro5 compliant
- DIN-rated motive power & torque outputs
- 169 kilowatts (230 PS; 227 bhp) @ 1,900 rpm; 1,050 newton metres (774 lbf·ft) @ 1,000-1,500 rpm
- 206 kilowatts (280 PS; 276 bhp) @ 1,900 rpm; 1,400 newton metres (1,033 lbf·ft) @ 1,000-1,350 rpm
- 235 kilowatts (320 PS; 315 bhp) @ 1,900 rpm; 1,600 newton metres (1,180 lbf·ft) @ 1,100-1,200 rpm
- applications
- Scania trucks
- references
- "Scania Euro5, 9-litre". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
"Fuel Systems - Extreme Pressure Injection (XPI) System". Cummins.com. Cummins Inc. Retrieved 4 November 2009.
Six-cylinder diesels
- This section is about current six-cylinder diesel engines, for discontinued six-cylinder diesel engines, see list of discontinued Volkswagen Group diesel engines#Six-cylinder diesels.
2.7 V6 TDI CR 120-140kW
This is a stroke-reduced version of the 3.0 V6 TDI CR
- identification
- parts code prefix: ???
- engine configuration & engine displacement
- 90° V6 engine, Turbocharged Direct Injection (TDI) turbodiesel; 2,698 cubic centimetres (164.6 cu in), bore x stroke: 83.0 by 83.1 millimetres (3.27 in × 3.27 in), stroke ratio: 1.00:1 - 'square engine', 449.6 cc per cylinder
- cylinder block & crankcase
- compacted vermicular graphite cast iron (GJV/CGI); four main bearings, oil cooler
- cylinder heads & valvetrain
- cast aluminium alloy; ??????
- aspiration
- single variable-geometry turbine (VGT) turbocharger
- fuel system & engine management
- common rail (CR) direct diesel injection, separate high-pressure pump and rail for each bank of cylinders, maximum injection pressure of 1,600 bars (23,210 psi), piezo injectors, up to five injections per piston cycle
- DIN-rated motive power & torque outputs, applications, ID codes
- 120 kilowatts (163 PS; 161 bhp) — Audi A4 (BSG: 11/05-06/08, CAM: 11/07-05/08, CGK: 06/08->), Audi A5 (CAM: 09/07-05/08, CGK: 05/08->), Audi A6 (BSG: 01/05-10/08, CAN: 10/08->)
- 132 kilowatts (179 PS; 177 bhp) @ 3,300-4,250 rpm; 380 newton metres (280 lbf·ft) @ 1,400-3,300 rpm — Audi A4 (BPP: 01/06-03/09), Audi A6 (BPP: 11/04-10/08)
- 140 kilowatts (190 PS; 188 bhp) — Audi A4 (CAM: 11/07-05/08, CGK: 06/08->), Audi A5 (CAM: 07/07-05/08, CGK: 05/08->), Audi A6 (CAN: 10/08->)
- references
- "New 2.7 TDI model boosts Audi A6 in the UK" (Press release). Audi UK. 23 November 2004.
"Compacted Vermicular Cast Iron (GJV) for the Audi V6 diesel engine". ATZonline.com. GWV Fachverlage GmbH. October 2004. Retrieved 18 January 2010.
3.0 V6 24v TDI CR 150–195 kW
This common rail V6 turbodiesel was developed by Audi, and first installed in the Audi D3 A8 in 2004. Subsequently made available for all longitudinal engined Audis, along with the same engine orientation in Volkswagen Passenger Cars 'premium' models and Volkswagen Marine applications.
- identification
- parts code prefix: 059
- engine configuration and engine displacement
- 90° V6 engine, Turbocharged Direct Injection (TDI) turbodiesel; 2,967 cubic centimetres (181.1 cu in); bore x stroke: 83.0 by 91.4 millimetres (3.27 in × 3.60 in), stroke ratio: 0.91:1 - undersquare/long-stroke, 494.5 cc per cylinder, compression ratio 17.0:1
- cylinder block and crankcase
- compacted vermicular graphite cast iron (GJV/CGI) with UV laser-honed exposed bores; cast bed-plate reinforcing lower bearing frame incorporating four main bearings each affixed with four bolts, balance shaft, die-forged steel crossplane crankshaft with offset crankpins to create an even firing order, simplex roller chain-driven contra-rotating balance shaft mounted within the 'vee', diagonal fracture-split connecting rods, oil-channel–cooled pistons with 'bowl in piston' combustion chamber, two-part oil sump with multi-chamber baffled insert, chain-driven ancillaries, oil filter module (incorporating cyclonic oil separator and water-to-oil cooler) mounted within the 'vee'
- cylinder heads & valvetrain
- cast aluminium alloy; four valves per cylinder, 24 valves total, low-friction roller finger cam followers with hydraulic valve clearance compensation, double overhead camshafts driven by four simplex roller chains and spur gears (hybrid relay method), dual inlet ports, siamesed exhaust ports
- aspiration
- hot-film air mass meter, two separate cast alloy intake manifolds, one BorgWarner variable geometry turbocharger (VGT) with electric boost control fitted within the Vee (water-cooled on Marine variants), maximum absolute pressure 2.3 bars (33 psi), two parallel side-mounted intercoolers (SMICs), sea-water tube intercooler on Marine variants, two cast iron exhaust manifolds (water-cooled on Marine variants)
- fuel system, exhaust system and engine management
- common rail (CR) diesel direct injection, initially one later two separate timing belt-driven high-pressure injection pumps and rail for each cylinder bank, rail pressure of 230 to 1,600 bars (3,340 to 23,210 psi), centrally sited seven-hole piezo injectors, dual pilot injection and up to five main injection pulses per piston cycle; water-cooled exhaust gas recirculation (EGR), catalytic converter and diesel particulate filter (DPF); Bosch EDC16 electronic engine control unit (ECU), Bosch MDC16 CP34 Marine Diesel Control on Marine variants
- Dimensions
- length: 444 mm (17.5 in), mass: 219 kilograms (483 lb) (automotive), 325 kilograms (717 lb) (Marine variants - dry weight, including DMF, cooling system and all ancillaries)
- DIN-rated motive power and torque outputs, applications, ID codes
- 150 kilowatts (204 PS; 201 bhp) @ 3,500 rpm (50.6kW/l, 68.8PS/l); 450 newton metres (332 lbf·ft) @ 1,400 rpm — Audi B7 A4 (BKN: 11/04-03/09)
- 155 kilowatts (211 PS; 208 bhp) (52.2kW/l, 71.1PS/l) — Audi Q7 (BUN: 03/06-11/07), Volkswagen Touareg (BUN: 04/06-11/07, CAS: 11/07->)
- 160 kilowatts (218 PS; 215 bhp) @ 3,250-4,750 rpm (53.9kW/l, 73.4PS/l); 500 newton metres (369 lbf·ft) @ 1,250-3,000 rpm — Audi A6#C7, Audi A7 (2014+)
- 165 kilowatts (224 PS; 221 bhp) @ 4,200 rpm (55.6kW/l, 75.5PS/l); 500 newton metres (369 lbf·ft) @ 2,000 rpm – Audi C6 A6 (BMK: 04/04-05/06), Volkswagen Phaeton (BMK: 05/04-05/07), Volkswagen Touareg (BKS: 11/04-05/08, CATA: 02/09->), Volkswagen Marine TDI 225-6 (BSP: 02/06->)
- 171 kilowatts (232 PS; 229 bhp) @ 4,000 rpm (57.6kW/l, 78.2PS/l); 500 newton metres (369 lbf·ft) @ 1,750 rpm, 450 newton metres (332 lbf·ft) between 1,400-3,250 rpm — Audi B7 A4 (ASB: 01/06-03/09), Audi C6 A6 (ASB: 05/06-10/08), Audi D3 A8 (ASB: 01/04->), Audi Q7 (BUG: 03/06-05/08), Volkswagen Phaeton (CARA: 06/07-11/08)
- 176 kilowatts (239 PS; 236 bhp) @ 4,000 rpm (59.3kW/l, 80.6PS/l); 550 newton metres (406 lbf·ft) @ 1,500–3,000 rpm — Audi B7 A4 (CAP: 11/07-05/08), Audi B8 A4 (CCW: 04/08-7/11, CCL: 11/09-7/11>), Audi A5 (CAP: 06/07-05/08, CCW: 03/08->), Audi C6 A6 (CDY: 10/08->), Audi Q5 (CCW: 11/08->), Audi Q7 (CASA: 11/07-05/10, CCMA: 11/08->), Porsche Cayenne (2009->), Volkswagen Phaeton (CARA: 03/07-06/07, CEXA: 06/08-05/10), Volkswagen Touareg (CASA/CASB/CASC: 11/07->)
- 180 kilowatts (245 PS; 241 bhp) @ 4,000-4,500 rpm; 550 newton metres (406 lbf·ft) @ 1,450-3,250 rpm — Audi A4#B8, Audi A5 (2011+); Audi A6#C7, Audi A7 (2010-2014), Volkswagen Touareg (2011+)
- 195 kilowatts (265 PS; 261 bhp) @ 4,200 rpm (65.7kW/l, 89.3PS/l); 550 newton metres (406 lbf·ft) @ 2,000 rpm — Volkswagen Marine TDI 265-6 (CEZA: 12/07->)
- 200 kilowatts (272 PS; 268 bhp) @ 3,500-4,250 rpm; 580 newton metres (428 lbf·ft) @ 1,250-3,250 rpm — Audi A6#C7, Audi A7 (2014+)
- references
- ID & detail from ETKA
"New Audi A6 - in depth". WorldCarFans.com. Audi AG. 8 April 2004. Retrieved 29 July 2009.
"New VW Touareg V6 TDI". WorldCarFans.com. 17 November 2004. Retrieved 29 July 2009.
"Compacted Vermicular Cast Iron (GJV) for the Audi V6 diesel engine". ATZonline.com. GWV Fachverlage GmbH. October 2004. Retrieved 18 January 2010.
"Compacted Graphite Iron – a material solution for modern diesel engine cylinder blocks and heads" (PDF). FoundryInfo-India.org. SinterCast, Sweden. February 2008. p. 3 of 7 (95). Retrieved 18 January 2010.
"Boat engines from Volkswagen Marine - Self-study programme M002 - Design and Operation" (PDF). www.vw-m.de. Volkswagen AG. August 2006. Retrieved 18 February 2010.
"Volkswagen Marine - engines for planing boats" (PDF). www.vw-m.de. Volkswagen AG. January 2009. Retrieved 18 February 2010.
"TDI 225-6 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"TDI 265-6 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
3.0 V6 24v BiTDI CR 230 kW
- DIN-rated motive power and torque outputs, applications, ID codes
- 230 kilowatts (313 PS; 308 bhp) @ 3,900 - 4,500 rpm; 650 newton metres (479 lbf·ft) @ 1,450 - 2,800 rpm, Audi A6, Audi A7, Audi SQ5 TDI (pre-2014)
- 235 kilowatts (320 PS; 315 bhp) @ 3,900 - 4,500 rpm; 650 newton metres (479 lbf·ft) @ 1,450 - 2,800 rpm, Audi A6, Audi A7 (since June 2014)
- references
- ID & detail from ETKA
"New Audi A6 - in depth". WorldCarFans.com. Audi AG. 8 April 2004. Retrieved 29 July 2009.
"New VW Touareg V6 TDI". WorldCarFans.com. 17 November 2004. Retrieved 29 July 2009.
"Compacted Vermicular Cast Iron (GJV) for the Audi V6 diesel engine". ATZonline.com. GWV Fachverlage GmbH. October 2004. Retrieved 18 January 2010.
"Compacted Graphite Iron – a material solution for modern diesel engine cylinder blocks and heads" (PDF). FoundryInfo-India.org. SinterCast, Sweden. February 2008. p. 3 of 7 (95). Retrieved 18 January 2010.
"Boat engines from Volkswagen Marine - Self-study programme M002 - Design and Operation" (PDF). www.vw-m.de. Volkswagen AG. August 2006. Retrieved 18 February 2010.
"Volkswagen Marine - engines for planing boats" (PDF). www.vw-m.de. Volkswagen AG. January 2009. Retrieved 18 February 2010.
"TDI 225-6 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
"TDI 265-6 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
11.7 DC12/DT12 EU4 250-353kW (Scania)
- engine configuration & engine displacement
- inline six-cylinder, turbodiesel; 11.7 litres (714 cu in)
- aspiration
- turbocharger, intercooler
- fuel system & engine management
- Cummins / Scania HPI high-pressure Unit Injector direct injection system, exhaust gas recirculation, Euro4 compliant
- DIN-rated motive power & torque outputs
- 250 kilowatts (340 PS; 335 bhp) @ 1,800 rpm; 1,700 newton metres (1,254 lbf·ft) @ 1,100-1,350 rpm
- 280 kilowatts (381 PS; 375 bhp) @ 1,800 rpm; 1,900 newton metres (1,401 lbf·ft) @ 1,100-1,350 rpm
- 309 kilowatts (420 PS; 414 bhp) @ 1,900 rpm; 2,100 newton metres (1,549 lbf·ft) @ 1,100-1,350 rpm
- 353 kilowatts (480 PS; 473 bhp) @ 1,900 rpm; 2,250 newton metres (1,660 lbf·ft) @ 1,100-1,450 rpm
- applications
- Scania trucks
- references
- "Scania Euro4, 12-litre". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
"Fuel Systems - High Pressure Injection (HPI) Systems". Cummins.com. Cummins Inc. Retrieved 4 November 2009.
11.7 DC12 EU5 280-309kW (Scania)
- engine configuration & engine displacement
- inline six-cylinder, turbodiesel; 11.7 litres (714 cu in)
- aspiration
- turbocharger, intercooler
- fuel system & engine management
- Cummins / Scania HPI high-pressure Unit Injector direct injection, Scania selective catalytic reduction (SCR) - catalytic converter with AdBlue urea injection, Euro5 compliant
- DIN-rated motive power & torque outputs
- 280 kilowatts (381 PS; 375 bhp) @ 1,800 rpm; 1,900 newton metres (1,401 lbf·ft) @ 1,100-1,400 rpm
- 309 kilowatts (420 PS; 414 bhp) @ 1,800 rpm; 2,100 newton metres (1,549 lbf·ft) @ 1,000-1,400 rpm
- applications
- Scania trucks
- references
- "Scania Euro5, 12-litre". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
"Fuel Systems - High Pressure Injection (HPI) Systems". Cummins.com. Cummins Inc. Retrieved 4 November 2009.
12.7 DC13 EU5 265-353kW (Scania)
- engine configuration & engine displacement
- inline six-cylinder, turbodiesel; 12.7 litres (775 cu in)
- aspiration
- variable-vane geometry turbocharger (VGT), intercooler
- fuel system & engine management
- Cummins / Scania XPI extra-high-pressure common rail direct injection, two-way exhaust gas recirculation, Euro5 compliant
- DIN-rated motive power & torque outputs
- 265 kilowatts (360 PS; 355 bhp) @ 1,900 rpm; 1,850 newton metres (1,364 lbf·ft) @ 1,000-1,300 rpm
- 294 kilowatts (400 PS; 394 bhp) @ 1,900 rpm; 2,100 newton metres (1,549 lbf·ft) @ 1,000-1,300 rpm
- 324 kilowatts (441 PS; 434 bhp) @ 1,900 rpm; 2,300 newton metres (1,696 lbf·ft) @ 1,000-1,300 rpm
- 353 kilowatts (480 PS; 473 bhp) @ 1,900 rpm; 2,500 newton metres (1,844 lbf·ft) @ 1,000-1,300 rpm
- applications
- Scania trucks
- references
- "Scania Euro5, 13-litre". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
"Fuel Systems - Extreme Pressure Injection (XPI) System". Cummins.com. Cummins Inc. Retrieved 4 November 2009.
Eight-cylinder diesels
- This section is about current eight-cylinder diesel engines, for discontinued eight-cylinder diesel engines, see list of discontinued Volkswagen Group diesel engines#Eight-cylinder diesels.
4.2 V8 TDI CR 235-257kW
This Audi engine is an entirely redeveloped and bored-out evolution of the superseded 4.0 V8 TDI CR, now with 90 millimetres (3.54 in) cylinder spacing between bore centres, and again with roller chain drive for the overhead camshafts and ancillaries. Just like its 4.0 V8 TDI predecessor, this all-new 4.2 V8 TDI retains the mantle of the worlds highest power output car with a diesel V8. This engine is manufactured at Győr, Hungary by AUDI AG subsidiary Audi Hungaria Motor Kft.
- identification
- parts code prefix: 057.C
- engine configuration & engine displacement
- 90° V8 engine, Turbocharged Direct Injection (TDI) turbodiesel; 4,134 cubic centimetres (252.3 cu in); bore x stroke: 83.0 by 95.5 millimetres (3.27 in × 3.76 in), stroke ratio: 0.87:1 - undersquare/long-stroke, 516.7 cc per cylinder, 90 millimetres (3.54 in) cylinder spacing, compression ratio: 16.5:1, water-cooled alternator
- cylinder block & crankcase
- compacted vermicular graphite cast iron (GJV/CGI), 62 kilograms (137 lb); UV laser-honed exposed bore; cast reinforcing bed-plate lower frame incorporating five main bearings (each 'bearing' affixed by four bolts), die-forged chrome molybdenum alloy steel crossplane crankshaft with first and second order forces and moments avoided, three-part oil sump consisting of cast alloy upper section, a middle baffle section and pressed steel lower section, diagonally fracture-split connecting rods, cast aluminium alloy Kolbenschmidt pistons (Mahle on CCFA), simplex roller chain-driven ancillaries, oil filter module (incorporating oil separator and water-to-oil cooler) mounted within the 'vee' (externally mounted on Marine variants)
- cylinder heads & valvetrain
- cast aluminium alloy; four valves per cylinder, 32 valves total, operated by low-friction roller finger cam followers with automatic hydraulic valve clearance compensation, double overhead camshafts - the inlets driven in a relay method at the rear (flywheel) end of the engine by four simplex roller chains and the exhausts driven from the inlets by automatic slack adjusting spur gears at the front end, two unequal-length swirl-inducing switchable inlet ports, siamesed unequal-length exhaust ports
- aspiration - automotive
- two air filters, two hot-film air mass meters, 'biturbo': two water-cooled turbochargers with electrically direct-actuated Variable Turbine Geometry (VTG) vanes (one turbo per cylinder bank) operating up to 226,000 rpm with a maximum electrically regulated boost of 2.5 bars (36 psi), two side-mounted air-to-air fan-assisted (not on Q7) intercoolers (SMICs), two separate cast alloy intake manifolds interconnected by a "feedthrough" system to equalise the pressure in the two cylinder banks, two-position variable swirl flaps integrated into the intake tract
- aspiration - Marine
- air filter with hot-film air mass meter, one water-cooled turbocharger with electric boost pressure control mounted within the vee, sea-water tube intercooler, two separate cast alloy intake manifolds interconnected by a "feedthrough" system to equalise the pressure in the two cylinder banks, two-position variable swirl flaps integrated into the intake tract
- fuel system & engine management
- common rail (CR) direct diesel injection: electric low-pressure fuel lift pump, one timing belt-driven 1,600 bars (23,210 psi) injection pump, two common rail fuel rails (one per cylinder bank), piezo-electric operated fuel injectors with eight-hole nozzles for homogenous fuel delivery, single and double pilot injection, up to four main injection actuations per piston cycle; Bosch EDC16 CP electronic engine control unit (ECU), Bosch MDC Marine Diesel Control on Marine variant
- exhaust system
- two air-gap insulated fan-branch alloy steel exhaust manifolds, two close-coupled maintenance-free oxidizing catalytic converters, two silicon carbide diesel particulate filters, Euro4 emissions standard compliant
- dimensions
- length: 520 millimetres (20.5 in), mass: 255–257 kilograms (562–567 lb) (automotive - 15 kilograms (33 lb) lighter than its 4.0 V8 TDI predecessor, 4 kilograms (9 lb) lighter than the all-aluminium alloy Mercedes-Benz 4.0 V8 CDI diesel engine), 368 kilograms (811 lb) (Marine variant: dry weight, including DMF, cooling system & all anciliaries)
- DIN-rated motive power & torque outputs, ID codes
- BMC: 235 kilowatts (320 PS; 315 bhp)
- BVN: 240 kilowatts (326 PS; 322 bhp) @ 3,750 rpm; 650 newton metres (479 lbf·ft) @ 1,600-3,500 rpm
- BTR: 240 kilowatts (326 PS; 322 bhp) @ 3,750 rpm; 760 newton metres (561 lbf·ft) @ 1,800-2,500 rpm
- CCFA: 250 kilowatts (340 PS; 335 bhp)
- CEM: 257 kilowatts (349 PS; 345 bhp) @ 4,200 rpm; 800 newton metres (590 lbf·ft) @ 1,900 rpm
- applications
- Audi D3 A8 4.2 TDI quattro (BMC: 01/05-06/05, BVN: 07/05->), Audi Q7 4.2 TDI (BTR: 03/07-06/09, CCFA: 06/09->), Volkswagen Marine TDI 350-8 (CEM: 02/09->), Volkswagen Touareg, Porsche Cayenne
- references
- "New Audi A8 4.2 TDI quattro". WorldCarFans.com. AUDI AG - press release. 19 May 2005. Retrieved 20 February 2010.
"Audi A8 new engines in detail". WorldCarFans.com. AUDI AG - press release. 9 June 2005. Retrieved 20 February 2010.
"Audi Q7 4.2 TDI in depth". WorldCarFans.com. AUDI AG - press release. 2 May 2007. Retrieved 20 February 2010.
"Compacted Graphite Iron – a material solution for modern diesel engine cylinder blocks and heads" (PDF). FoundryInfo-India.org. SinterCast, Sweden. February 2008. p. 3 of 7 (95). Retrieved 18 January 2010.
"Volkswagen Marine - engines for planing boats" (PDF). www.vw-m.de. Volkswagen AG. January 2009. Retrieved 18 February 2010.
"TDI 350-8 - technical data". www.vw-m.de. Volkswagen AG. Retrieved 18 February 2010.
15.6 V8 DC16 368-544kW (Scania)
- engine configuration & engine displacement
- 90° V8 engine, turbodiesel; 15,607 cubic centimetres (952.4 cu in); bore x stroke: 127.0 by 154.0 millimetres (5.00 in × 6.06 in), stroke ratio: 0.82:1 - undersquare/long-stroke, 1,950.8 cc per cylinder
- aspiration
- turbocharger, intercooler
- fuel system & engine management
- Scania PDE high-pressure Unit Injector system, Scania selective catalytic reduction (SCR) - catalytic converter with AdBlue urea injection
- DIN-rated motive power & torque outputs - Euro4
- 368 kilowatts (500 PS; 493 bhp) @ 1,900 rpm; 2,400 newton metres (1,770 lbf·ft) @ 1,100-1,400 rpm
- 412 kilowatts (560 PS; 553 bhp) @ 1,900 rpm; 2,700 newton metres (1,991 lbf·ft) @ 1,100-1,400 rpm
- 456 kilowatts (620 PS; 612 bhp) @ 1,900 rpm; 3,000 newton metres (2,213 lbf·ft) @ 1,100-1,400 rpm
- DIN-rated motive power & torque outputs - Euro5
- 368 kilowatts (500 PS; 493 bhp) @ 1,800 rpm; 2,500 newton metres (1,844 lbf·ft) @ 1,000-1,350 rpm
- 412 kilowatts (560 PS; 553 bhp) @ 1,900 rpm; 2,700 newton metres (1,991 lbf·ft) @ 1,000-1,400 rpm
- 456 kilowatts (620 PS; 612 bhp) @ 1,900 rpm; 3,000 newton metres (2,213 lbf·ft) @ 1,000-1,400 rpm
- 544 kilowatts (740 PS; 730 bhp) @ 2,000 rpm; 3,600 newton metres (2,655 lbf·ft) @ 1,000-1,400 rpm reference: http://www3.scania.com/en/New-V8-truck-range/The-new-730hp-engine/
- applications
- Scania trucks
- references
- "Scania Euro4, 16-litre". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
"Scania Euro5, 16-litre". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
Ten-cylinder diesels
- This section is about current ten-cylinder diesel engines
4.9/5.0 V10 TDI PD 230-258kW
This '4.9' or '5.0' badged V10 TDI diesel engine is only used in Volkswagen Passenger Cars 'premium' models. At its launch in the Volkswagen Phaeton, it became the most powerful diesel-engined car in the world. A heavily modified dry sump version was used in an LMP1 Lola sports car to compete in the 2004 Le Mans under a Caterpillar badge. "24 Heures du Mans". Perkins.com. Perkins Engines Co. Ltd. 16 March 2006. Retrieved 29 September 2009.
- identification
- parts code prefix: 07Z
- engine configuration & engine displacement
- 90° V10 engine, Turbocharged Direct Injection (TDI) turbodiesel; 4,921 cubic centimetres (300.3 cu in), bore x stroke: 81.0 by 95.5 millimetres (3.19 in × 3.76 in), stroke ratio: 0.85:1 - undersquare/long-stroke, 492.1 cc per cylinder, 88 millimetres (3.46 in) cylinder spacing, compression ratio: 18.0:1, water-cooled alternator
- cylinder block & crankcase
- low-pressure die-cast aluminium alloy (AlSi8Cu3); bolted-on grey cast iron bearing tunnel and crank carrier with six main bearings, die-forged steel cross-plane crankshaft with 18-degree crankpin offset to achieve a 72-degree even firing order, contra-rotating balance shaft, diagonally cracked forged connecting rods, two-part cast aluminium alloy baffled oil sump
- cylinder heads & valvetrain
- cast aluminium alloy; two valves per cylinder, 20 valves total, each with two concentric valve springs and bucket tappets, gear-driven single overhead camshaft utilising a separate cassette-type 'motor control module'
- aspiration
- two air filters with two hot-film air mass meters, twin-turbo: two electrically controlled Garrett GT1852V variable vane turbochargers, two side-mounted intercoolers, two cast alloy intake manifolds
- fuel system & engine management
- Pumpe Düse (PD) diesel direct injection: one underfloor electric fuel lift pump, two camshaft-driven low-pressure fuel pumps supplying common fuel rails (one per cylinder bank), ten camshaft-actuated UI-P1 2,050 bars (29,730 psi) Unit Injectors with solenoid-actuated nozzles, 72° injection interval; two Bosch EDC16 32-bit electronic engine control units (ECUs) working on the 'master/slave' method
- exhaust system
- water-cooled exhaust gas recirculation (EGR), air-gap insulated cast iron exhaust manifolds, two close-coupled ceramic catalytic converters, two main underfloor oxydising catalytic converters, EU3 emissions compliant
- dimensions
- length: 544 millimetres (21.4 in)
- 4.9 DIN-rated motive power & torque output, ID codes
- 230 kilowatts (313 PS; 308 bhp) @ 3,750 rpm; 750 newton metres (553 lbf·ft) @ 2,000 rpm — AJS, BLE, BKW (North America)
- 5.0 DIN-rated motive power & torque outputs, ID codes
- 230 kilowatts (313 PS; 308 bhp) @ 3,750 rpm; 750 newton metres (553 lbf·ft) @ 2,000 rpm — AYH, BWF
- 258 kilowatts (351 PS; 346 bhp) @ 3,500 rpm; 850 newton metres (627 lbf·ft) @ 2,000 rpm — CBWA: Touareg R50
- 4.9 applications
- Volkswagen Phaeton 4motion (AJS: 12/02-10/06), Volkswagen Touareg (BKW: 11/03-11/04, BLE: 11/04->)
- 5.0 application
- Volkswagen Touareg (AYH: 11/02-11/06, BWF: 12/06-02/09), Touareg R50 (CBWA: 08/07->)
- references
- "Volkswagen Touareg - in depth". WorldCarFans.com. 7 October 2002. Retrieved 14 January 2010.
"Volkswagen Phaeton V10 TDI in detail - The ten-cylinder diesel engine". WorldCarFans.com. 24 March 2003. Retrieved 14 January 2010.
"Volkswagen Touareg R50 - in depth". WorldCarFans.com. Volkswagen Group - press release. 9 October 2007. Retrieved 14 January 2010.
awards
- was winner of the "Above 4.0-litre" category for two consecutive years in the 2003 and 2004 annual competition for International Engine of the Year "VW V10 TDI wins International Engine of the Year Award". WorldCarFans.com. VW UK - press release. 27 May 2004. Retrieved 14 January 2010.
Twelve-cylinder diesels
- This section is about current twelve-cylinder diesel engines
6.0 V12 48v TDI CR DPF 368kW
A world first. Wholly developed by quattro GmbH, AUDI AG's private high-performance specialist subsidiary, and built at Audi Hungaria Motor Kft. in Győr, Hungary, this Turbocharged Direct Injection (TDI) V12 engine is a road-going development of the unit in the 24 Hours of Le Mans winning Audi R15 TDI. It features common rail direct injection, and includes the same cylinder bore and piston stroke as the latest 3.0 V6 TDI CR. This engine has created the most powerful sport utility vehicle (SUV) in its class - the Audi Q7 V12 TDI quattro.
- identification
- parts code prefix: 05A
- engine configuration & engine displacement
- 60° V12 engine, Turbocharged Direct Injection (TDI) turbodiesel; 5,934 cubic centimetres (362.1 cu in); bore x stroke: 83.0 by 91.4 millimetres (3.27 in × 3.60 in), stroke ratio: 0.91:1 - undersquare/long-stroke, 494.5 cc per cylinder; 90 millimetres (3.54 in) cylinder spacing; 17 millimetres (0.67 in) cylinder bank offset; compression ratio: 16.0:1; two oil coolers (one: water/oil, the other: air/oil); four coolant radiators; water-cooled alternator
- cylinder block & crankcase
- GJV-450 compacted vermicular graphite cast iron (GJV/CGI); nodular graphite reinforced cast iron bedplate frame with seven main bearings and four bolts per bearing, die-forged chrome and molybdenum steel alloy crossplane crankshaft, diagonally fracture-cracked forged connecting rods, aluminium forged Mahle pistons, two-part cast aluminium alloy baffled oil sump
- cylinder heads & valvetrain
- composite lower section made from low-pressure die cast aluminium alloy with integrated intake and exhaust ports, middle section for guiding engine oil flow, and the top section is a pressure-cast ladder frame for the overhead camshafts; four valves per cylinder, 48 valves total, low-friction roller finger cam followers with automatic hydraulic valve clearance compensation, double overhead camshaft - the exhaust camshafts driven from the flywheel side via a two-stage chain drive utilising three 3/8" simplex roller chains, and the inlet camshafts driven from the exhaust camshafts by gears at the front of the engine; two unequal-length swirl-inducing switchable inlet ports, siamesed unequal-length exhaust ports
- aspiration
- two air filters, two hot-film air mass meters; 'biturbo': two water-cooled turbochargers with electrically controlled Variable Turbine Geometry (VTG) (one turbo per cylinder bank) and an electronically regulated boost pressure of up to 2.6 bars (38 psi), two all-alloy side-mounted intercoolers; cast alloy intake manifold with dual adjustable turbulence flaps
- fuel system & engine management
- Bosch 2,000 bars (29,010 psi) common rail (CR) (one rail per cylinder bank) direct injection: with two chain-driven high-pressure fuel pumps, fuel cooler for return line, twelve combustion chamber-sited eight-hole (0.12 millimetres (0.0047 in)) piezo injectors with multi-pulse injection (up to five injection operations per piston cycle, including pre- and post- ignition injection); two Bosch EDC electronic engine control units (ECUs) working on the 'master and slave' concept; water-cooled vacuum-actuated exhaust gas recirculation (EGR) with up to 50% recirculation rate at partial engine load; European Euro5 emissions standard compliant
- exhaust system
- double flow exhaust pipes with two catalysts and two diesel particulate filters (DPF); two lambda sensors, two exhaust gas temperature sensors
- dimensions
- length: 684 millimetres (26.9 in) (just 166 mm (6.5 in) longer than the V8 TDI),
- DIN-rated motive power & torque output, ID code
- 368 kilowatts (500 PS; 493 bhp) @ 4,000 rpm - 62.0 kW (84.3 PS; 83.1 bhp) per litre; 1,000 newton metres (738 lbf·ft) @ 1,750-3,000 rpm — CCGA
- application
- Audi Q7 V12 TDI quattro (09/08->)
- references
- "The World's most powerful diesel passenger car". AudiWorld.com. AUDI AG. 11 September 2006. Retrieved 28 August 2009.
"Audi introduces V12 diesel passenger car concept (with images)". GreenCarCongress.com. BioAge Group, LLC. 7 January 2007. Retrieved 18 January 2010.
"The ultimate high-performance SUV - the new Audi Q7 V12 TDI quattro". Audi-MediaServices.com. AUDI AG - press release. 2 March 2008. Retrieved 2 October 2009.
"Compacted Graphite Iron – a material solution for modern diesel engine cylinder blocks and heads" (PDF). FoundryInfo-India.org. SinterCast, Sweden. February 2008. p. 3 of 7 (95). Retrieved 18 January 2010.
Diesel engines data table
The following table contains a very brief selection of current and historical Volkswagen Group compression-ignition diesel engines for comparison of performance and operating characteristics:
engine model | engine disp.: (cc) | engine config. | valvetrain | max. power: kW (PS) | rpm for max. power | torque @ max. power: Nm | max. torque: Nm (lb·ft) | rpm for max. torque | power @ max. torque: kW | specific power: kW/L (PS/L) | max MEP: bar | MEP @ max. power: bar | max operating revs: rpm | dates installed (all unless PS stated in 1st col.) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.2 TDI 3L | 1,191 | inline 3 (R3) | 6v SOHC |
45 (61) | 4,000 | 107 | 140 (103) | 1,800- 2,400 | 26-35 | 37.8 (51.2) | 14.8 | 11.3 | 06/1999- 08/2005 | |
1.4 TDI | 1,422 | inline 3 (R3) | 6v SOHC |
59 (80) | 4,000 | 141 | 195 (144) | 2,200 | 45 | 41.5 (56.3) | 17.2 | 12.4 | 05/1999- present | |
1.6 TDI CR | 1,598 | inline 4 (R4) | 16v DOHC |
85 (116) | 4,400 | 184 | 250 (184) | 2,000- 2,500 | 31-65 | 53.2 (72.6) | 19.7 | 14.5 | ??/????- present | |
1.7 D | 1,716 | inline 4 (R4) | 8v SOHC |
42 (57) | 4,500 | 89 | 103 (76) | 2,800 | 30 | 24.5 (33.2) | 7.5 | 6.5 | 10/1986- 05/1992 | |
1.7 SDI | 1,716 | inline 4 (R4) | 8v SOHC |
44 (60) | 4,200 | 100 | 115 (85) | 2,200 | 26 | 25.6 (35.0) | 8.4 | 7.3 | ??/????- ??/???? | |
1.9 D | 1,896 | inline 4 (R4) | 8v SOHC |
47 (64) | 4,300 | 104 | 124 (91) | 2,500- 3,200 | 33-42 | 24.8 (33.8) | 8.2 | 6.9 | ??/????- present | |
1.9 SD | 1,896 | inline 4 (R4) | 8v SOHC |
36 (49) | 3,000 | 115 | 121 (89) | 1,800 | 23 | 19.0 (25.8) | 8 | 7.6 | ??/????- present | |
1.9 SDI | 1,896 | inline 4 (R4) | 8v SOHC |
50 (68) | 4,000 | 119 | 133 (98) | 1,800 | 25 | 26.4 (35.9) | 8.8 | 7.9 | 07/1995- present | |
1.9 TD | 1,896 | inline 4 (R4) | 8v SOHC |
55 (75) | 4,200 | 125 | 150 (111) | 2,000 | 31 | 29.0 (39.6) | 9.9 | 8.3 | ||
1.9 TDI | 1,896 | inline 4 (R4) | 8v SOHC |
66 (90) | 3,750 | 168 | 210 (155) | 1,900 | 42 | 34.8 (47.5) | 13.9 | 11.1 | 09/1991- present | |
1.9 TDI PD | 1,896 | inline 4 (R4) | 8v SOHC |
96 (131) | 4,000 | 229 | 310 (229) | 1,900 | 58 | 50.6 (69.1) | 20.5 | 15.2 | 01/1998- present | |
2.0 SDI PD | 1,968 | inline 4 (R4) | 8v SOHC |
55 (75) | 4,200 | 125 | 140 (103) | 2,400 | 35 | 27.9 (38.1) | 8.9 | 8 | ||
2.0 TDI PD 140 PS |
1,968 | inline 4 (R4) | 8v DOHC |
103 (140) | 4,000 | 246 | 320 (236) | 1,800 | 60 | 52.3 (71.1) | 20.4 | 15.7 | ||
2.0 TDI PD 16v 170 PS |
1,968 | inline 4 (R4) | 16v DOHC |
125 (170) | 4,200 | 284 | 350 (258) | 1,800- 2,500 | 66-92 | 63.5 (86.4) | 22.3 | 18.1 | ||
2.0 TDI CR 240 PS |
1,968 | inline 4 (R4) | 16v DOHC |
176 (240) | 4,000 | 420 | 500 (370) | 1,750- 2,500 | 92-131 | 89.4 (122) | 31.9 | 26.8 | ||
2.5 R5 SDI 75 PS |
2,461 | inline 5 (R5) | 10v SOHC |
55 (75) | 3,600 | 146 | 155 (114) | 2,250 | 37 | 22.3 (30.5) | 7.9 | 7.4 | 05/1996- present | |
2.5 R5 TDI CR | 2,461 | inline 5 (R5) | 10v SOHC |
120 (163) | 3,500 | 327 | 350 (258) | 2,000 | 73 | 48.8 (66.3) | 17.9 | 16.7 | ||
2.5 R5 TDI PD | 2,461 | inline 5 (R5) | 10v SOHC |
128 (174) | 3,500 | 349 | 400 (295) | 2,000 | 84 | 52.0 (70.7) | 20.4 | 17.8 | ||
2.7 V6 TDI | 2,698 | V6 engine | 24v DOHC |
132 (179) | 3,300- 4,250 | 382-297 | 380 (280) | 1,400- 3,300 | 56-131 | 48.9 (66.3) | 17.7 | 17.8 | 11/2004- present | |
3.0 V6 TDI 204 PS |
2,967 | V6 engine | 24v DOHC |
150 (204) | 3,500 | 409 | 450 (332) | 1,400 | 66 | 50.6 (68.8) | 19.1 | 17.3 | 11/2004- 03/2009 | |
3.0 V6 TDI 232 PS |
2,967 | V6 engine | 24v DOHC |
171 (232) | 4,000 | 408 | 500 (369) | 1,750 | 92 | 57.6 (78.2) | 21.2 | 17.3 | 01/2004- 09/2014 | |
3.0 V6 24v BiTDI CR 320 PS |
2,967 | V6 engine | 24v DOHC |
235 (320) | 3,900-4,500 | 575-499 | 650 (479) | 1,450 - 2,800 | 99-191 | 79.2 (107.9) | 27.5 | 24.4 | 06/2014- present | |
3.3 V8 TDI | 3,328 | V8 engine | 32v DOHC |
165 (224) | 4,000 | 394 | 480 (354) | 1,800- 3,000 | 90-151 | 49.6 (67.3) | 18.1 | 14.9 | 12/1999- 09/2002 | |
4.0 V8 TDI | 3,936 | V8 engine | 32v DOHC |
202 (275) | 3,750 | 514 | 650 (479) | 1,800- 2,500 | 123-170 | 51.3 (69.9) | 20.8 | 16.4 | 05/2003- 07/2005 | |
4.2 V8 TDI | 4,134 | V8 engine | 32v DOHC |
257 (349) | 4,200 | 584 | 800 (590) | 1,900 | 159 | 62.2 (84.4) | 24.3 | 17.8 | 01/2005- present | |
5.0 V10 TDI 351 PS |
4,921 | V10 engine | 20v SOHC |
258 (351) | 3,500 | 704 | 850 (627) | 2,000 | 178 | 52.4 (71.3) | 21.7 | 18 | 11/2002- present | |
6.0 V12 TDI CR DPF (Audi Q7) |
5,934 | V12 engine | 48v DOHC |
368 (500) | 4,000 | 879 | 1,000 (738) | 1,750- 3,000 | 183-314 | 62.0 (84.3) | 21.2 | 18.6 | 09/2008- present | |
engine model | engine disp.: (cc / cc) | engine config. | valvetrain | max. power: kW (PS) | rpm for max. power | torque @ max. power: Nm | max. torque: Nm (lb·ft) | rpm for max. torque | power @ max. torque: kW | specific power: kW/L (PS/L) | max MEP: bar | MEP @ max. power: bar | max operating revs: rpm | dates installed (all unless PS stated in 1st col.) |
Production
Polymer firm DSM has developed a lightweight plastic crankshaft cover using bio-derived feedstocks. The cover, produced by Tier One supplier Kaco, includes two integral seals and is used on Volkswagen's EA288 engine family.[21]
Emitec developed close-coupled selective catalytic reduction systems used in the EA288 engines.[22]
See also
- List of Volkswagen Group petrol engines
- G-Lader
- G60 - for detailed development info and progression of forced induction in Volkswagen Group engines
- List of engines used in Chrysler products
References
- 1 2 ETKA official factory data
- ↑ "Volkswagen Marine > Engines <". www.vw-m.de. Volkswagen Group. 2009. Retrieved 4 November 2009.
- ↑ "The SDI 1.9 Industrial Engine" (PDF), mi-uk.com (Volkswagen AG), March 2005, retrieved 4 November 2009
- ↑ Volkswagen of America Inc (April 2008). Self Study Program 826803 2.0 Liter TDI Common Rail BIN5 ULEV Engine. Volkswagen of America Inc.
- ↑ The Modular Diesel Engine System from Volkswagen
- ↑ THE EURO 6 ENGINES IN THE MODULAR DIESEL ENGINE SYSTEM OF VOLKSWAGEN
- ↑ Volkswagen Internationaler Presseworkshop Wolfsburg, im Januar / Februar 2012
- ↑ Volkswagen introducing new EA288 diesel engine
- ↑ A closer look at the basics of Volkswagen Group’s important new 2.0L diesel MDB engine
- ↑ VOLKSWAGEN GROUP Powertrain and Fuel Strategy
- ↑ New EA288 Volkswagen TDI Engine to Debut in 2015 Golf, Jetta, Passat and Beetle
- ↑ 2015 Volkswagen Beetle, Golf, Passat & Jetta to offer a new EA288 diesel engine
- ↑ VOLKSWAGEN GROUP OF AMERICA CONFIRMS TIMING FOR NEW TDI® CLEAN DIESEL ENGINE
- ↑ Diesel Download: The Scoop on VW’s 40-Percent Cleaner MDB TDI Engine
- ↑ "Delphi Multec Diesel Common Rail System" (PDF).
- ↑ "Delphi's Multec® Diesel common Rail System Helps New Volkswagen Polo BlueMotion Achieve Record Low CO2 Emissions and Fuel consumption". Delphi Press Release.
- ↑ Jack Ewing (4 October 2015). "Volkswagen Engine-Rigging Scheme Said to Have Begun in 2008". New York Times.
- ↑ Volkswagen Group of America, Inc. (February 2014). Self Study Program 820433 The EA288 Diesel Engine Family Design and Function. Volkswagen Group of America, Inc.
- ↑ Volkswagen of America Inc (April 2008). Self Study Program 826803 2.0 Liter TDI Common Rail BIN5 ULEV Engine. Volkswagen of America Inc.
- 1 2 http://www.inchcape-volkswagen.co.uk/VW-News/VW-New-Volkswagen-Passat-revealed-240.aspx
- ↑ Castor beans cut weight from crankshaft covers
- ↑ Emitec applies electric cat heating to diesel engines
- "Volkswagen engines ID code". AutoShoppingCenter.com. n.d. Retrieved 30 July 2009.
- "Audi engine ID code". AutoShoppingCenter.com. n.d. Retrieved 30 July 2009.
- "Pumpe Düse Einspritzung (PDE - UIS)". kfztech.de (in German). Retrieved 4 November 2009.
- "Auto Tech: Pumpe Duse". CanadianDriver.com. CanadianDriver Communications Inc.,. 29 September 2004. Retrieved 4 November 2009.
- "Passenger-car systems - Low-pressure pump". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Passenger-car systems - Radial-piston distributor pump". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Passenger-car systems - Axial-piston distributor pump". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Passenger-car systems - Fuel-injection nozzles". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Passenger-car systems - Unit Injector System (UIS)". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Passenger-car systems - Common Rail System CRS". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Passenger-car systems - Electronic Diesel Control (EDC)". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Passenger-car systems - Systems for exhaust-gas treatment". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Low-pressure system". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - In-line fuel-injection pump". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Single-cylinder injection pumps". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Radial-piston pump". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Axial-piston distributor pump". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Injection nozzles". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Unit Pump System (UPS)". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Unit Injector System (UIS)". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Common Rail System CRS". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Electronic Diesel Control (EDC)". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Commercial vehicle systems - Systems for exhaust-gas treatment". Bosch.de. Robert Bosch GmbH - Automotive Technology - Diesel systems. Retrieved 4 November 2009.
- "Scania EGR - exhaust gas recirculation". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
- "Scania SCR - selective catalytic reduction". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
- "Scania XPI - extra-high pressure injection". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
- "Scania HPI - high pressure injection". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
- "Scania PDE - high-pressure unit injectors". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
- "Scania modular combustion concept". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
- "Scania Turbocompound - converting excess energy into power". Scania.co.uk. Scania (Great Britain) Limited. Retrieved 5 October 2009.
External links
Wikimedia Commons has media related to Volkswagen Group engines. |
Wikimedia Commons has media related to Scania engines. |
- VolkswagenAG.com - Volkswagen Group corporate website
- Chemnitz (Germany) - engine plant Mobility and Sustainability
- Kassel (Germany) - engine plant Mobility and Sustainability
- Salzgitter (Germany) - engine plant Mobility and Sustainability
- Polkowice (Poland) - engine plant Mobility and Sustainability
- São Carlos (Brazil) - engine plant Mobility and Sustainability
- Shanghai (China) - engine plant Mobility and Sustainability
- Audi at a glance - includes information on the Győr engine plant
- Audi-TDI-chronicle.com - official Audi history and timeline of the TDI engine
|