Virtual Telecommunications Access Method

Virtual Telecommunications Access Method (VTAM) is the IBM subsystem that implements Systems Network Architecture (SNA) for mainframe environments.[1] VTAM provides an application programming interface (API) for communication applications, and controls communication equipment such as adapters and controllers. In modern terminology, VTAM provides a communication stack and device drivers.

History

VTAM was introduced in 1974 after a series of delays[2] as a major component of SNA along with the 370x Network Control Program (NCP) and Synchronous Data Link Control (SDLC).

In IBM terminology, VTAM is an access method software allowing application programs to read and write data to and from external devices. It is called 'virtual' because it was introduced at the time when IBM was introducing virtual storage by upgrading the operating systems of the System/360 series to virtual storage versions. VTAM was supposed to be the successor to the older telecommunications access methods, such as Basic telecommunications access method (BTAM) and Telecommunications Access Method (TCAM), which were maintained for compatibility reasons. As such, VTAM is comparable with VSAM, which was at that time a new and supposedly converged access method for disk storage.

ACF/VTAM

Originally, VTAM was provided free of charge like most systems software of that time. However, VTAM 2 was the last version to be freely available. ACF/VTAM (Advanced Communication Function/Virtual Telecommunications Access Method) was introduced in 1976[3] and was provided for a licence fee. The major new feature of ACF/VTAM was the Multisystem Networking Facility, which introduced "implementation of intersystem communication among multiple S/370s.".[4]

A limited version of ACF/VTAM known as ACF/VTAME (Advanced Communications Function for the Virtual Telecommunications Access Method Entry) was made available for DOS/VSE systems running on the IBM 4300.[5]

SNA Services

VTAM has been renamed to be the SNA Services feature of Communications Server for OS/390. This software package also provides TCP/IP functions.

Features

VTAM supports several network protocols, including SDLC, Token Ring, start-stop, Bisync, local (channel attached) 3270 devices,[6] and later TCP/IP.

In a VTAM network, communication took place through an integrated communication adapter in the mainframe itself, or by a separate programmable front-end processor, the IBM 3745/3746 Communications Processor, with its own operating system, the Network Control Program NCP. These machines are no longer actively marketed by IBM, but are still supported. IBM provides hardware maintenance and microcode updates for the estimated 20,000 installed 3745/3746 controllers. A robust third party industry of smaller 3745/3746 specialty companies provide such controllers, upgrades, features, and related support services. VTAM and SNA are still in use by many enterprises.

Initially, VTAM only allowed communication between mainframes and peripheral equipment such as terminals, distributed processors and minicomputers. Later, 'cross-domain' services were introduced (not to be confused with TCP/IP domains) allowing SNA networks with more than one mainframe. A subsequent development was SNA Network Interconnect, allowing networks of different organizational entities (firms) to be interconnected with a high degree of independence. Finally, Advanced Peer to Peer Networking functions (APPN) were added to VTAM. In APPN the mainframe is no longer the heart of the network, but all nodes in the network are considered as peers. One of the reasons why APPN was introduced was to act as a DECnet-killer, but by the time APPN was actually shipped the popularity of DECnet had already declined. APPN was considered overly complex and as of 2012 has been largely superseded by TCP/IP.

References

  1. IBM Corporation (2011). ABCs of z/OS System Programming Volume 4 (PDF).
  2. Frank, Ronald A (October 17, 1973). "IBM Delays Second Virtual TP Release; SD:C Impact Expected". Computerworld. Retrieved September 1, 2012.
  3. IBM Corporation. "5735-RC2 IBM Advanced Communication Function for VTAM (ACF/VTAM) V1 R1 for OS/VS". Retrieved September 1, 2012.
  4. Introduction to Advanced Communications Function (PDF). IBM. May 1979. GC30-3033-1.
  5. Network Program Products: General Information (PDF). IBM. September 1985. GC27-0657-2.
  6. Introduction to VTAM (PDF). IBM. April 1976. GC27-6987-5.
This article is issued from Wikipedia - version of the Wednesday, January 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.