Warrego Highway
Warrego Highway Queensland | |
---|---|
Warrego Highway (green on black) | |
General information | |
Type | Highway |
Length | 721 km (448 mi) |
Route number(s) |
Alt A2 (Mitchell Highway - Landsborough Highway) National Highway A2 (Landsborough Highway - Pine Mountain Road, Brassall) M2 (Pine Mountain Road, Brassall - Ipswich Motorway) |
Major junctions | |
NW end | Mitchell Highway, Charleville, Queensland |
Landsborough Highway Carnarvon Highway Leichhardt Highway Moonie Highway Bunya Highway Gore Highway New England Highway Brisbane Valley Highway | |
SE end |
Ipswich Motorway / Cunningham Highway, Ipswich, Queensland |
Location(s) | |
Major settlements | Morven, Mitchell, Roma, Miles, Dalby, Toowoomba |
Highway system | |
Highways in Australia National Highway • Freeways in Australia Highways in Queensland |
The Warrego Highway is located in southern Queensland, Australia. It connects coastal centres to the south western areas of the state, and is approximately 750 km in length. It takes its name from the Warrego River, which is the endpoint of the highway. The entire highway is part of the National Highway system linking Darwin and Brisbane: formerly National Highway 54, Queensland began to convert to the alphanumeric system much of Australia had adopted in the early-2000s and is now designated as National Highway A2.
Route description
The highway commences at the end of the M2 Ipswich Motorway, near Ipswich, and climbs the Great Dividing Range to Toowoomba. The first section of highway between Ipswich and Toowoomba is motorway grade, a four lane divided highway with motorway-style on-ramps and off-ramps. In the Lockyer Valley the highway is experiencing strip development with a growth in petrol stations and commercial properties.[1]
From Toowoomba, it then crosses the Darling Downs and continues to Charleville where the road is two lanes with many passing lanes along the route.
Terrain
The Warrego Highway's lowest point along its length is 3.69 m where it crosses the Bremer River near Ipswich, and its highest elevation is 665 m where it crosses the Great Dividing Range as it enters Toowoomba.[2]
Speed zones
- Ipswich - Blacksoil 100 km/h
- Blacksoil - Brisbane Valley Highway Junction 80 km/h
- Brisbane Valley Highway Junction - Withcott 100 km/h
- Withcott - Great Dividing Range 60 km/h to 100 km/h
- Through Toowoomba 60 km/h
- Toowoomba - Charleville 100 km/h except sections between Toowoomba and Chinchilla at 110 km/h
Towns along the route
From east to west, the highway passes through or close to the cities and major towns of:
Gallery
-
Highway at Haigslea, 2014
-
A signpost
-
View from Picnic Point, 2014
History
In January 2011, the highway was extensively damaged where it crosses the Toowoomba Range. This included land slips, shoulder and embankment erosion, the erosion of drains and damaged rock fall netting.[3] The road wasn't fully repaired with all four lanes open until September 2011.[4]
Future developments
Toowoomba Second Range Crossing
The Toowoomba Second Range Crossing is a major road proposal aimed at bypassing the urban area of Toowoomba and providing a better crossing of the Great Dividing Range. The bypass will link the Warrego Highway at Helidon (in the east) with the highway at Charlton (in the west). The bypass will continue to the Gore Highway and will be 41 km in length.
Other items of interest
Darren Lockyer Way
On 28 September 2011 the Queensland Main Roads Minister, Craig Wallace, announced that an 85 km stretch of the Warrego Highway will be renamed Darren Lockyer Way, in honour of the retired Brisbane Broncos, Queensland and Australian rugby league captain. The section of road to be renamed is from Riverview to the bottom of the Toowoomba Range at Withcott. Special signage including "Welcome to Darren Lockyer Way" has been erected.[5]
The "Toll Bar"
The section of the Warrego Highway from Withcott to the top of the Toowoomba Range was first opened in January, 1855 as a toll road, named Toll Bar Road.[6] The toll collection point was marked by a bar across the road and a fence on either side. The upper section of Toll Bar Road was initially unsealed and very steep, with grades up to 14%. This road remained in use until December, 1939, when work on a new, less steep, upper section was completed. Part of the upper section is now a suburban street named Old Toll Bar Road.[7] The term "The Toll Bar" is sometimes used by locals to describe the current road, and it is also used in the mapping software distributed with Navman GPS systems.
See also
References
- ↑ Terry Ryder (5 February 2009). "Lockyer food bowl banks on diversification". The Australian. News Limited. Retrieved 11 January 2010.
- ↑ "Map of Warrego Highway in Queensland". Bonzle Digital Atlas of Australia. Retrieved 22 September 2009.
- ↑ "Reconstruction at Toowoomba Range crossing, Warrego Highway". Queensland Reconstruction Authority. Queensland Government. Retrieved 5 August 2015.
- ↑ "Toowoomba Range lanes reopen as part of Operation Queenslander". Media Statement. Queensland Government. 16 September 2011. Retrieved 5 August 2015.
- ↑ Robyn Ironside (28 September 2011). "Stretch of Warrego Highway named after Darren Lockyer". The Courier Mail.
- ↑ Paul Rands. "Road Photos & Information: Queensland". Gateway Motorway, Logan Motorway, Ipswich Motorway, Warrego Highway, Landsborough Highway and Barkly Highway (M2/A2) - Toowoomba to Chinchilla. Retrieved 30 December 2011.
- ↑ "The Old Toll Bar". Geocaching Australia. Retrieved 30 December 2011.
External links
Media related to Warrego Highway at Wikimedia Commons
|