Wireless power transfer

Inductive charging pad for LG smartphone, using the Qi system, an example of near-field wireless transfer. When the phone is set on the pad, a coil in the pad creates a magnetic field which induces a current in another coil, in the phone, charging its battery.

Wireless power transfer (WPT) or wireless energy transmission is the transmission of electrical energy from a power source to an electrical load, such as an electrical power grid or a consuming device, without the use of discrete man-made conductors. Wireless power is a generic term that refers to a number of different power transmission technologies that use time-varying electric, magnetic, or electromagnetic fields. In wireless power transfer, a wireless transmitter connected to a power source conveys the field energy across an intervening space to one or more receivers, where it is converted back to an electrical current and then utilized. Wireless transmission is useful to power electrical devices in cases where interconnecting wires are inconvenient, hazardous, or are not possible.

Wireless power techniques fall into two categories, non-radiative and radiative. In non-radiative techniques, power is typically transferred by magnetic fields using magnetic inductive coupling between coils of wire. Applications of this type include electric toothbrush chargers, RFID tags, smartcards, and chargers for implantable medical devices like artificial cardiac pacemakers, and inductive powering or charging of electric vehicles like trains or buses. A current focus is to develop wireless systems to charge mobile and handheld computing devices such as cellphones, digital music players and portable computers without being tethered to a wall plug. Power may also be transferred by electric fields using capacitive coupling between metal electrodes. In radiative far-field techniques, also called power beaming, power is transferred by beams of electromagnetic radiation, like microwaves or laser beams. These techniques can transport energy longer distances but must be aimed at the receiver. Proposed applications for this type are solar power satellites, and wireless powered drone aircraft.[1][2][3]

An important issue associated with all wireless power systems is limiting the exposure of people and other living things to potentially injurious electromagnetic fields (see Electromagnetic radiation and health).

Overview

Further information: Coupling (electronics)
Generic block diagram of a wireless power system

"Wireless power transfer" is a collective term that refers to a number of different technologies for transmitting energy by means of electromagnetic fields.[4][5] The technologies, listed in the table below, differ in the distance over which they can transfer power efficiently, whether the transmitter must be aimed (directed) at the receiver, and in the type of electromagnetic energy they use: time varying electric fields, magnetic fields, radio waves, microwaves, or infrared or visible light waves.[6]

In general a wireless power system consists of a "transmitter" connected to a source of power such as a mains power line, which converts the power to a time-varying electromagnetic field, and one or more "receiver" devices which receive the power and convert it back to DC or AC electric current which is utilized by an electrical load.[4][6] At the transmitter the input power is converted to an oscillating electromagnetic field by some type of "antenna" device. The word "antenna" is used loosely here; it may be a coil of wire which generates a magnetic field, a metal plate which generates an electric field, an antenna which radiates radio waves, or a laser which generates light. A similar antenna or coupling device at the receiver converts the oscillating fields to an electric current. An important parameter that determines the type of waves is the frequency f in hertz of the oscillations. The frequency determines the wavelength λ = c/f of the waves which carry the energy across the gap, where c is the velocity of light.

Wireless power uses the same fields and waves as wireless communication devices like radio,[7][8] another familiar technology that involves electrical energy transmitted without wires by electromagnetic fields, used in cellphones, radio and television broadcasting, and WiFi. In radio communication the goal is the transmission of information, so the amount of power reaching the receiver is not so important, as long as it is sufficient so the signal to noise ratio is high enough that the information can be received intelligibly.[5][7][8] In wireless communication technologies, generally, only tiny amounts of power reach the receiver. In contrast, with wireless power the amount of energy received is the important thing, so the efficiency (fraction of transmitted energy that is received) is the more significant parameter.[5] For this reason, wireless power technologies are likely to be more limited by distance than wireless communication technologies.

These are the different wireless power technologies:[4][6][9][10][11]

Technology Range[12] Directivity[6] Frequency Antenna devices Current and or possible future applications
Inductive coupling Short Low Hz – MHz Wire coils Electric tooth brush and razor battery charging, induction stovetops and industrial heaters.
Resonant inductive coupling Mid- Low kHz – GHz Tuned wire coils, lumped element resonators Charging portable devices (Qi), biomedical implants, electric vehicles, powering busses, trains, MAGLEV, RFID, smartcards.
Capacitive coupling Short Low kHz – MHz Electrodes Charging portable devices, power routing in large scale integrated circuits, Smartcards.
Magnetodynamic coupling[10] Short N.A. Hz Rotating magnets Charging electric vehicles.
Microwaves Long High GHz Parabolic dishes, phased arrays, rectennas Solar power satellite, powering drone aircraft.
Light waves Long High ≥THz Lasers, photocells, lenses Powering drone aircraft, powering space elevator climbers.

Field regions

Electric and magnetic fields are created by charged particles in matter such as electrons. A stationary charge creates an electrostatic field in the space around it. A steady current of charges (direct current, DC) creates a static magnetic field around it. The above fields contain energy, but cannot carry power because they are static. However time-varying fields can carry power.[13] Accelerating electric charges, such as are found in an alternating current (AC) of electrons in a wire, create time-varying electric and magnetic fields in the space around them. These fields can exert oscillating forces on the electrons in a receiving "antenna", causing them to move back and forth. These represent alternating current which can be used to power a load.

The oscillating electric and magnetic fields surrounding moving electric charges in an antenna device can be divided into two regions, depending on distance Drange from the antenna.[4][6][7][9][14][15] [16] The boundary between the regions is somewhat vaguely defined.[6] The fields have different characteristics in these regions, and different technologies are used for transferring power:

Resonance, such as resonant inductive coupling, can increase the coupling between the antennas greatly, allowing efficient transmission at somewhat greater distances,[4][7][9][14][19][20] although the fields still decrease exponentially. Therefore the range of near-field devices is conventionally divided into two categories:
  • Short range – up to about one antenna diameter: Drange ≤ Dant.[17][19][21] This is the range over which ordinary nonresonant capacitive or inductive coupling can transfer practical amounts of power.
  • Mid-range – up to 10 times the antenna diameter: Drange ≤ 10 Dant.[19][20][21][22] This is the range over which resonant capacitive or inductive coupling can transfer practical amounts of power.
However, unlike fields, electromagnetic radiation can be focused by reflection or refraction into beams. By using a high-gain antenna or optical system which concentrates the radiation into a narrow beam aimed at the receiver, it can be used for long range power transmission.[19][24] From the Rayleigh criterion, to produce the narrow beams necessary to focus a significant amount of the energy on a distant receiver, an antenna must be much larger than the wavelength of the waves used: Dant >> λ = c/f.[25][26] Practical beam power devices require wavelengths in the centimeter region or below, corresponding to frequencies above 1 GHz, in the microwave range or above.[4]

Non-radiative techniques

Near-field

At large relative distance, the near-field components of electric and magnetic fields are approximately quasi-static oscillating dipole fields. These fields decrease with the cube of distance: (Drange/Dant)−3 [16][27] Since power is proportional to the square of the field strength, the power transferred decreases as (Drange/Dant)−6.[7][18][28][29] or 60 dB per decade. In other words, if far apart, doubling the distance between the two antennas causes the power received to decrease by a factor of 26 = 64. As a result, inductive and capacitive coupling can only be used for short-range power transfer, within a few times the diameter of the antenna device Dant. Unlike in a radiative system where the maximum radiation occurs when the dipole antennas are oriented transverse to the direction of propagation, with dipole fields the maximum coupling occurs when the dipoles are oriented longitudinally.

Inductive (magnetic) coupling

Generic block diagram of an inductive wireless power system.
(left) Modern inductive power transfer, an electric toothbrush charger. A coil in the stand produces a magnetic field, inducing an AC current in a coil in the toothbrush, which is rectified to charge the batteries.
(right) A light bulb powered wirelessly by induction, in 1910.

In inductive coupling (electromagnetic induction[9][30] or inductive power transfer, IPT), power is transferred between coils of wire by a magnetic field.[7] The transmitter and receiver coils together form a transformer[7][9] (see diagram). An alternating current (AC) through the transmitter coil (L1) creates an oscillating magnetic field (B) by Ampere's law. The magnetic field passes through the receiving coil (L2), where it induces an alternating EMF (voltage) by Faraday's law of induction, which creates an AC current in the receiver.[5][30] The induced alternating current may either drive the load directly, or be rectified to direct current (DC) by a rectifier in the receiver, which drives the load. A few systems, such as electric toothbrush charging stands, work at 50/60 Hz so AC mains current is applied directly to the transmitter coil, but in most systems an electronic oscillator generates a higher frequency AC current which drives the coil, because transmission efficiency improves with frequency.[30]

Magnetic inductive coupling is the oldest and most widely used wireless power technology, and virtually the only one so far which is used in commercial products. It is used in inductive charging stands for cordless appliances used in wet environments such as electric toothbrushes[9] and shavers, to reduce the risk of electric shock.[31] Another application area is "transcutaneous" recharging of biomedical prosthetic devices implanted in the human body, such as cardiac pacemakers and insulin pumps, to avoid having wires passing through the skin.[32][33] It is also used to charge electric vehicles such as cars and to either charge or power transit vehicles like buses and trains.[9][11]

However the fastest growing use is wireless charging pads to recharge mobile and handheld wireless devices such as laptop and tablet computers, cellphones, digital media players, and video game controllers.[11]

The power transferred increases with frequency[30] and the mutual inductance M between the coils,[5] which depends on their geometry and the distance Drange between them. A widely-used figure of merit is the coupling coefficient \scriptstyle k\; =\; M/\sqrt{L_1 L_2}.[30][34] This dimensionless parameter is equal to the fraction of magnetic flux through L1 that passes through L2. If the two coils are on the same axis and close together so all the magnetic flux from L1 passes through L2, k = 1 and the link efficiency approaches 100%. The greater the separation between the coils, the more of the magnetic field from the first coil misses the second, and the lower k and the link efficiency are, approaching zero at large separations.[30] The link efficiency and power transferred is roughly proportional to k2.[30] In order to achieve high efficiency, the coils must be very close together, a fraction of the coil diameter Dant,[30] usually within centimeters,[24] with the coils' axes aligned. Wide, flat coil shapes are usually used, to increase coupling.[30] Ferrite "flux confinement" cores can confine the magnetic fields, improving coupling and reducing interference to nearby electronics,[30][32] but they are heavy and bulky so small wireless devices often use air-core coils.

Ordinary inductive coupling can only achieve high efficiency when the coils are very close together, usually adjacent. In most modern inductive systems resonant inductive coupling (described below) is used, in which the efficiency is increased by using resonant circuits.[15][20][30][35] This can achieve high efficiencies at greater distances than nonresonant inductive coupling.

Prototype inductive electric car charging system at 2011 Tokyo Auto Show
Powermat inductive charging spots in a coffee shop. Customers can set their phones and computers on them to recharge.
Wireless powered access card.
Resonant inductive coupling
Diagram of the resonant inductive wireless power system demonstrated by Marin Soljačić's MIT team in 2007. The resonant circuits were coils of copper wire which resonated with their internal capacitance (dotted capacitors) at 10 MHz. Power was coupled into the transmitter resonator, and out of the receiver resonator into the rectifier, by small coils which also served for impedance matching.

Resonant inductive coupling (electrodynamic coupling,[9] strongly coupled magnetic resonance[19]) is a form of inductive coupling in which power is transferred by magnetic fields (B, green) between two resonant circuits (tuned circuits), one in the transmitter and one in the receiver (see diagram, right).[7][9][15][31][35] Each resonant circuit consists of a coil of wire connected to a capacitor, or a self-resonant coil or other resonator with internal capacitance. The two are tuned to resonate at the same resonant frequency. The resonance between the coils can greatly increase coupling and power transfer, analogously to the way a vibrating tuning fork can induce sympathetic vibration in a distant fork tuned to the same pitch. Nikola Tesla first discovered resonant coupling during his pioneering experiments in wireless power transfer around the turn of the 20th century,[36][37][38] but the possibilities of using resonant coupling to increase transmission range has only recently been explored.[39] In 2007 a team led by Marin Soljačić at MIT used two coupled tuned circuits each made of a 25 cm self-resonant coil of wire at 10 MHz to achieve the transmission of 60 W of power over a distance of 2 meters (6.6 ft) (8 times the coil diameter) at around 40% efficiency.[9][19][31][37][40]

The concept behind resonant inductive coupling is that high Q factor resonators exchange energy at a much higher rate than they lose energy due to internal damping.[19] Therefore, by using resonance, the same amount of power can be transferred at greater distances, using the much weaker magnetic fields out in the peripheral regions ("tails") of the near fields (these are sometimes called evanescent fields[19]). Resonant inductive coupling can achieve high efficiency at ranges of 4 to 10 times the coil diameter (Dant).[20][21][22] This is called "mid-range" transfer,[21] in contrast to the "short range" of nonresonant inductive transfer, which can achieve similar efficiencies only when the coils are adjacent. Another advantage is that resonant circuits interact with each other so much more strongly than they do with nonresonant objects that power losses due to absorption in stray nearby objects are negligible.[15][19] A drawback of resonant coupling is that at close ranges when the two resonant circuits are tightly coupled, the resonant frequency of the system is no longer constant but "splits" into two resonant peaks, so the maximum power transfer no longer occurs at the original resonant frequency and the oscillator frequency must be tuned to the new resonance peak.[20]

Resonant technology is currently being widely incorporated in modern inductive wireless power systems.[30] One of the possibilities envisioned for this technology is area wireless power coverage. A coil in the wall or ceiling of a room might be able to wirelessly power lights and mobile devices anywhere in the room, with reasonable efficiency.[31] An environmental and economic benefit of wirelessly powering small devices such as clocks, radios, music players and remote controls is that it could drastically reduce the 6 billion batteries disposed of each year, a large source of toxic waste and groundwater contamination.[24]

Capacitive coupling

Main article: Capacitive coupling

In capacitive coupling (electrostatic induction), the conjugate of magnetic inductive coupling, energy is transmitted by electric fields[5] between electrodes such as metal plates. The transmitter and receiver electrodes form a capacitor, with the intervening space as the dielectric.[5][7][9][32][41] An alternating voltage generated by the transmitter is applied to the transmitting plate, and the oscillating electric field induces an alternating potential on the receiver plate by electrostatic induction,[5][41] which causes an alternating current to flow in the load circuit. The amount of power transferred increases with the frequency[41] the square of the voltage, and the capacitance between the plates, which is proportional to the area of the smaller plate and (for short distances) inversely proportional to the separation.[5]

Capacitive coupling has only been used practically in a few low power applications, because the very high voltages on the electrodes required to transmit significant power can be hazardous,[7][9] and can cause unpleasant side effects such as noxious ozone production. In addition, in contrast to magnetic fields,[19] electric fields interact strongly with most materials, including the human body, due to dielectric polarization.[32] Intervening materials between or near the electrodes can absorb the energy, in the case of humans possibly causing excessive electromagnetic field exposure.[7] However capacitive coupling has a few advantages over inductive. The field is largely confined between the capacitor plates, reducing interference, which in inductive coupling requires heavy ferrite "flux confinement" cores.[5][32] Also, alignment requirements between the transmitter and receiver are less critical.[5][7][41] Capacitive coupling has recently been applied to charging battery powered portable devices.[42] and is being considered as a means of transferring power between substrate layers in integrated circuits.[43]

Capacitive wireless power systems
transverse or bipolar coupling
longitudinal or unipolar coupling

Two types of circuit have been used:

Resonant capacitive coupling

Resonance can also be used with capacitive coupling to extend the range. At the turn of the century, Nikola Tesla did the first experiments with both resonant electrostatic and magnetic coupling.

Electrical conduction

Atmospheric plasma channel coupling

See also: Electrolaser

In atmospheric plasma channel coupling, energy is transferred between two electrodes by electrical conduction through ionized air.[47] When an electric field gradient exists between the two electrodes, exceeding 34 kilovolts per centimeter at sea level atmospheric pressure, an electric arc occurs.[48] This atmospheric dielectric breakdown results in the flow of electric current along a random trajectory through an ionized plasma channel between the two electrodes. An example of this is natural lightning, where one electrode is a virtual point in a cloud and the other is a point on Earth. Laser Induced Plasma Channel (LIPC) research is presently underway using ultrafast lasers to artificially promote development of the plasma channel through the air, directing the electric arc, and guiding the current across a specific path in a controllable manner.[49] The laser energy reduces the atmospheric dielectric breakdown voltage and the air is made less insulating by superheating, which lowers the density (p) of the filament of air.[50]

This new process is being explored for use as a laser lightning rod and as a means to trigger lightning bolts from clouds for natural lightning channel studies,[51] for artificial atmospheric propagation studies, as a substitute for conventional radio antennas,[52] for applications associated with electric welding and machining,[53][54] for diverting power from high-voltage capacitor discharges, for directed-energy weapon applications[55][56][57][58] and electronic jamming.[59]

Magnetodynamic coupling

In this method, power is transmitted between two rotating armatures, one in the transmitter and one in the receiver, which rotate synchronously, coupled together by a magnetic field generated by permanent magnets on the armatures.[10] The transmitter armature is turned either by or as the rotor of an electric motor, and its magnetic field exerts torque on the receiver armature, turning it. The magnetic field acts like a mechanical coupling between the armatures.[10] The receiver armature produces power to drive the load, either by turning a separate electric generator or by using the receiver armature itself as the rotor in a generator.

This device has been proposed as an alternative to inductive power transfer for noncontact charging of electric vehicles.[10] A rotating armature embedded in a garage floor or curb would turn a receiver armature in the underside of the vehicle to charge its batteries.[10] It is claimed that this technique can transfer power over distances of 10 to 15 cm (4 to 6 inches) with high efficiency, over 90%.[10][60] Also, the low frequency stray magnetic fields produced by the rotating magnets produce less electromagnetic interference to nearby electronic devices than the high frequency magnetic fields produced by inductive coupling systems. A prototype system charging electric vehicles has been in operation at University of British Columbia since 2012. Other researchers, however, claim that the two energy conversions (electrical to mechanical to electrical again) make the system less efficient than electrical systems like inductive coupling.[10]

Far-field radiative techniques

Far field methods achieve longer ranges, often multiple kilometer ranges, where the distance is much greater than the diameter of the device(s). The main reason for longer ranges with radio wave and optical devices is the fact that electromagnetic radiation in the far-field can be made to match the shape of the receiving area (using high directivity antennas or well-collimated laser beams). The maximum directivity for antennas is physically limited by diffraction.

In general, visible light (from lasers) and microwaves (from purpose-designed antennas) are the forms of electromagnetic radiation best suited to energy transfer.

The dimensions of the components may be dictated by the distance from transmitter to receiver, the wavelength and the Rayleigh criterion or diffraction limit, used in standard radio frequency antenna design, which also applies to lasers. Airy's diffraction limit is also frequently used to determine an approximate spot size at an arbitrary distance from the aperture. Electromagnetic radiation experiences less diffraction at shorter wavelengths (higher frequencies); so, for example, a blue laser is diffracted less than a red one.

The Rayleigh criterion dictates that any radio wave, microwave or laser beam will spread and become weaker and diffuse over distance; the larger the transmitter antenna or laser aperture compared to the wavelength of radiation, the tighter the beam and the less it will spread as a function of distance (and vice versa). Smaller antennae also suffer from excessive losses due to side lobes. However, the concept of laser aperture considerably differs from an antenna. Typically, a laser aperture much larger than the wavelength induces multi-moded radiation and mostly collimators are used before emitted radiation couples into a fiber or into space.

Ultimately, beamwidth is physically determined by diffraction due to the dish size in relation to the wavelength of the electromagnetic radiation used to make the beam.

Microwave power beaming can be more efficient than lasers, and is less prone to atmospheric attenuation caused by dust or water vapor.

Then the power levels are calculated by combining the above parameters together, and adding in the gains and losses due to the antenna characteristics and the transparency and dispersion of the medium through which the radiation passes. That process is known as calculating a link budget.

Microwaves

An artist's depiction of a solar satellite that could send electric energy by microwaves to a space vessel or planetary surface.

Power transmission via radio waves can be made more directional, allowing longer distance power beaming, with shorter wavelengths of electromagnetic radiation, typically in the microwave range.[61] A rectenna may be used to convert the microwave energy back into electricity. Rectenna conversion efficiencies exceeding 95% have been realized. Power beaming using microwaves has been proposed for the transmission of energy from orbiting solar power satellites to Earth and the beaming of power to spacecraft leaving orbit has been considered.[62][63]

Power beaming by microwaves has the difficulty that, for most space applications, the required aperture sizes are very large due to diffraction limiting antenna directionality. For example, the 1978 NASA Study of solar power satellites required a 1-km diameter transmitting antenna and a 10 km diameter receiving rectenna for a microwave beam at 2.45 GHz.[64] These sizes can be somewhat decreased by using shorter wavelengths, although short wavelengths may have difficulties with atmospheric absorption and beam blockage by rain or water droplets. Because of the "thinned array curse," it is not possible to make a narrower beam by combining the beams of several smaller satellites.

For earthbound applications, a large-area 10 km diameter receiving array allows large total power levels to be used while operating at the low power density suggested for human electromagnetic exposure safety. A human safe power density of 1 mW/cm2 distributed across a 10 km diameter area corresponds to 750 megawatts total power level. This is the power level found in many modern electric power plants.

Following World War II, which saw the development of high-power microwave emitters known as cavity magnetrons, the idea of using microwaves to transfer power was researched. By 1964, a miniature helicopter propelled by microwave power had been demonstrated.[65]

Japanese researcher Hidetsugu Yagi also investigated wireless energy transmission using a directional array antenna that he designed. In February 1926, Yagi and his colleague Shintaro Uda published their first paper on the tuned high-gain directional array now known as the Yagi antenna. While it did not prove to be particularly useful for power transmission, this beam antenna has been widely adopted throughout the broadcasting and wireless telecommunications industries due to its excellent performance characteristics.[66]

Wireless high power transmission using microwaves is well proven. Experiments in the tens of kilowatts have been performed at Goldstone in California in 1975[67][68][69] and more recently (1997) at Grand Bassin on Reunion Island.[70] These methods achieve distances on the order of a kilometer.

Under experimental conditions, microwave conversion efficiency was measured to be around 54%.[71]

A change to 24 GHz has been suggested as microwave emitters similar to LEDs have been made with very high quantum efficiencies using negative resistance, i.e., Gunn or IMPATT diodes, and this would be viable for short range links.

Recently, researchers at the University of Washington introduced power over Wi-Fi, which trickle-charges batteries and powered battery-free cameras and temperature sensors using transmissions from Wi-Fi routers.[72]

Lasers

With a laser beam centered on its panel of photovoltaic cells, a lightweight model plane makes the first flight of an aircraft powered by a laser beam inside a building at NASA Marshall Space Flight Center.

In the case of electromagnetic radiation closer to the visible region of the spectrum (tens of micrometers to tens of nanometers), power can be transmitted by converting electricity into a laser beam that is then pointed at a photovoltaic cell.[73][74] This mechanism is generally known as 'power beaming' because the power is beamed at a receiver that can convert it to electrical energy. At the receiver, special photovoltaic laser power converters which are optimized for monochromatic light conversion are applied.[75]

Advantages compared to other wireless methods are:[76]

Drawbacks include:

Laser 'powerbeaming' technology was explored in military weapons[78][79][80] and aerospace[81][82] applications. Also, it is applied for powering of various kinds of sensors in industrial environment. Lately, it is developed for powering commercial and consumer electronics. Wireless energy transfer systems using lasers for consumer space have to satisfy laser safety requirements standardized under IEC 60825.

Other details include propagation,[83] and the coherence and the range limitation problem.[84]

Geoffrey Landis[85][86][87] is one of the pioneers of solar power satellites[88] and laser-based transfer of energy especially for space and lunar missions. The demand for safe and frequent space missions has resulted in proposals for a laser-powered space elevator.[89][90]

NASA's Dryden Flight Research Center demonstrated a lightweight unmanned model plane powered by a laser beam.[91] This proof-of-concept demonstrates the feasibility of periodic recharging using the laser beam system.

Energy harvesting

Main article: Energy harvesting

In the context of wireless power, energy harvesting, also called power harvesting or energy scavenging, is the conversion of ambient energy from the environment to electric power, mainly to power small autonomous wireless electronic devices.[92] The ambient energy may come from stray electric or magnetic fields or radio waves from nearby electrical equipment, light, thermal energy (heat), or kinetic energy such as vibration or motion of the device.[92] Although the efficiency of conversion is usually low and the power gathered often minuscule (milliwatts or microwatts),[92] it can be adequate to run or recharge small micropower wireless devices such as remote sensors, which are proliferating in many fields.[92] This new technology is being developed to eliminate the need for battery replacement or charging of such wireless devices, allowing them to operate completely autonomously.

History

In 1826 André-Marie Ampère developed Ampère's circuital law showing that electric current produces a magnetic field.[93] Michael Faraday developed Faraday's law of induction in 1831, describing the electromagnetic force induced in a conductor by a time-varying magnetic flux. In 1862 James Clerk Maxwell synthesized these and other observations, experiments and equations of electricity, magnetism and optics into a consistent theory, deriving Maxwell's equations. This set of partial differential equations forms the basis for modern electromagnetics, including the wireless transmission of electrical energy.[11][35] Maxwell predicted the existence of electromagnetic waves in his 1873 A Treatise on Electricity and Magnetism.[94] In 1884 John Henry Poynting developed equations for the flow of power in an electromagnetic field, Poynting's theorem and the Poynting vector, which are used in the analysis of wireless energy transfer systems.[11][35] In 1888 Heinrich Rudolf Hertz discovered radio waves, confirming the prediction of electromagnetic waves by Maxwell.[94]

Tesla's experiments

Tesla demonstrating the transmission of electrical energy without wires during a lecture at Columbia College, New York, in 1891.  The two metal sheets are connected to his Tesla coil oscillator, which applies a high voltage radio frequency alternating current.  An oscillating electric field between the sheets ionizes the low pressure gas in the two long Geissler tubes in his hands, causing them to glow, similar to neon tubes.
(left) An experiment at Tesla's Experimental Station in Colorado Springs, demonstrating the wireless transmission of electrical energy sufficient to power a 10 watt incandescent lamp at a distance of 1,938 feet (591 m) from the station's magnifying transmitter.[95] (right) Tesla's unsuccessful Wardenclyffe World Wireless system station prototype.

Nikola Tesla conducted the first experiments in wireless power transfer at the turn of the 20th century. From 1891 to 1898 he investigated wireless transmission of electrical energy using his radio frequency resonant transformer called the Tesla coil, which produces high voltage, high frequency alternating currents.[35][37]  The Tesla coil was first developed as a high-voltage radiofrequency power supply for his "System of Electric Lighting" patented in 1891.[96]  With this basic resonance transformer design concept he was able to transmit electrical energy over short distances without interconnecting wires by means of resonant magnetic inductive coupling.[36][38]  The transformer's primary LC circuit acted as a transmitter.  The transformer's secondary LC circuit was tuned to the primary LC circuit's resonant frequency and acted as a receiver.  The Tesla coil transformer itself could be configured as a wireless transmitter and used to transmit energy by capacitive inductive coupling.  While demonstrating this technology during lectures before the American Institute of Electrical Engineers in 1891, the Institution of Electrical Engineers in 1892, and at the 1893 Columbian Exposition in Chicago he was able to wirelessly power lamps from across the stage and out into the room.[97][98][99]

In 1899 Tesla moved his wireless transmission research to Colorado Springs, Colorado. At the Colorado Springs Experimental Station he assembled an enormous version of his resonance transformer called a Tesla coil magnifying transmitter, capable of producing voltages on the order of 10 megavolts.  In one demonstration, using just the primary circuit energized to only one-twentieth of the oscillator's full capacity, he was able to light three incandescent lamps by resonant inductive coupling to an improvised secondary circuit at a distance of about one hundred feet.[100][101]  This is now familiar technology used throughout electronics, and is currently being widely applied to short-range wireless power systems.[37]  The magnetic and capacitive induction coupling techniques applied by Tesla during his early demonstrations incorporate "near-field" effects,[37] so they are not useful for transmitting electrical energy over long distances. 

By this time Tesla's top priority had shifted from his system of high-frequency lighting to the development of a wireless system that could transmit electrical energy directly to homes and factories, as proposed in his 1900 Century magazine article.[102][103][104]  He claimed that it is possible to transmit energy on a worldwide scale, applying a method that involves electrical conduction through the earth and the periodic alteration of Earth's electrostatic charge.[105][106][107]  In 1900 he received the patents SYSTEM OF TRANSMISSION OF ELECTRICAL ENERGY and APPARATUS FOR TRANSMISSION OF ELECTRICAL ENERGY.[108][109]  They describe two wireless stations, one consisting of a large Tesla coil magnifying transmitter and the other a similar Tesla coil receiver, each with an elevated air terminal electrode suspended by balloon at an altitude of 30,000 feet (9,100 m), where the atmospheric pressure is lower.  Tesla believed atmospheric ionization would allow energy to be transmitted at high voltages (millions of volts) over long distances by electrical conduction.  Another claim was that such a high elevation of the air terminal electrodes is not absolutely necessary.[110]  By 1901 Tesla had come to believe the entire planet could made to act as a giant electrical resonator and that by driving current pulses into Earth at a harmonic of its fundamental resonant frequency using a grounded Tesla coil working against a relatively short elevated capacitive air terminal electrode, its natural electrostatic potential could be made to oscillate, and this alternating current could be received at any location with a Tesla coil receiver and similar capacitive air terminal electrode arrangement tuned to resonance with the transmitter.[111][112]

Resonant wireless power demonstration at the Franklin Institute, Philadelphia, 1937. The vacuum tube oscillator (left) transmits electrical energy inductively to the resonant circuit receiver (right), lighting the bulb. Visitors could adjust the receiver's tuned circuit with the two knobs. When the resonant frequency of the receiver was out of tune with the transmitter, the light would go out.

In 1901, Tesla began construction of a large high-voltage wireless energy transmission station, now called the Wardenclyffe Tower, at Shoreham, New York.  Promoted to investors as a transatlantic radiotelephony station, it was also intended to demonstrate small-scale wireless power transfer as a prototype transmitter for a "World Wireless" system that was to broadcast both information and power worldwide.[103][113]  By 1904 his investors had pulled out and the facility was never completed. 

Although Tesla claimed his ideas were proven, he had a history of failing to confirm his ideas by experiment,[114][115] and there seems to be no evidence that he ever transferred significant power beyond the short-range demonstrations above.[11][35][36][115][116][117][118] [119] [120] The only report of long-distance transmission by Tesla is a claim, not found in reliable sources, that in 1899 he wirelessly lit 200 light bulbs at a distance of 26 miles (42 km).[116][117] There is no independent confirmation of this putative demonstration;[116][117][121] Tesla did not mention it,[117] and it does not appear in his meticulous laboratory notes.[121][122] It originated in 1944 from Tesla's first biographer, John J. O'Neill,[116] who said he pieced it together from "fragmentary material... in a number of publications".[123] In the 110 years since Tesla's experiments, efforts using similar equipment have failed to achieve long distance power transmission,[37][116][117][119] and the scientific consensus is his World Wireless system would not have worked.[11][35][36][103][117][124][125][126][127] Tesla's world power transmission scheme remains today what it was in Tesla's time, a fascinating dream.[11][103]

Microwaves

Before World War 2, little progress was made in wireless power transmission.[118] Radio was developed for communication uses, but couldn't be used for power transmission due to the fact that the relatively low-frequency radio waves spread out in all directions and little energy reached the receiver.[11][35][118] In radio communication, at the receiver, an amplifier intensifies a weak signal using energy from another source. For power transmission, efficient transmission required transmitters that could generate higher-frequency microwaves, which can be focused in narrow beams towards a receiver.[11][35][118][125]

The development of microwave technology during World War 2, such as the klystron and magnetron tubes and parabolic antennas[118] made radiative (far-field) methods practical for the first time, and the first long-distance wireless power transmission was achieved in the 1960s by William C. Brown.[11][35] In 1964 Brown invented the rectenna which could efficiently convert microwaves to DC power, and in 1964 demonstrated it with the first wireless-powered aircraft, a model helicopter powered by microwaves beamed from the ground.[11][118] A major motivation for microwave research in the 1970s and 80s was to develop a solar power satellite.[35][118] Conceived in 1968 by Peter Glaser, this would harvest energy from sunlight using solar cells and beam it down to Earth as microwaves to huge rectennas, which would convert it to electrical energy on the electric power grid.[11][128] In landmark 1975 high power experiments, Brown demonstrated short range transmission of 475 W of microwaves at 54% DC to DC efficiency, and he and Robert Dickinson at NASA's Jet Propulsion Laboratory transmitted 30 kW DC output power across 1.5 km with 2.38 GHz microwaves from a 26 m dish to a 7.3 x 3.5 m rectenna array.[11][129] The incident-RF to DC conversion efficiency of the rectenna was 80%.[11][129] In 1983 Japan launched MINIX (Microwave Ionosphere Nonlinear Interaction Experiment), a rocket experiment to test transmission of high power microwaves through the ionosphere.[11]

In recent years a focus of research has been the development of wireless-powered drone aircraft, which began in 1959 with the Dept. of Defense's RAMP (Raytheon Airborne Microwave Platform) project[118] which sponsored Brown's research. In 1987 Canada's Communications Research Center developed a small prototype airplane called Stationary High Altitude Relay Platform (SHARP) to relay telecommunication data between points on earth similar to a communication satellite. Powered by a rectenna, it could fly at 13 miles (21 km) altitude and stay aloft for months. In 1992 a team at Kyoto University built a more advanced craft called MILAX (MIcrowave Lifted Airplane eXperiment). In 2003 NASA flew the first laser powered aircraft. The small model plane's motor was powered by electricity generated by photocells from a beam of infrared light from a ground based laser, while a control system kept the laser pointed at the plane.

Near-field technologies

Inductive power transfer between nearby coils of wire is an old technology, existing since the transformer was developed in the 1800s. Induction heating has been used for 100 years. With the advent of cordless appliances, inductive charging stands were developed for appliances used in wet environments like electric toothbrushes and electric razors to reduce the hazard of electric shock.

One field to which inductive transfer has been applied is to power electric vehicles. In 1892 Maurice Hutin and Maurice Leblanc patented a wireless method of powering railroad trains using resonant coils inductively coupled to a track wire at 3 kHz.[130] The first passive RFID (Radio Frequency Identification) technologies were invented by Mario Cardullo[131] (1973) and Koelle et al.[132] (1975) and by the 1990s were being used in proximity cards and contactless smartcards.

The proliferation of portable wireless communication devices such as mobile phones, tablet, and laptop computers in recent decades is currently driving the development of wireless powering and charging technology to eliminate the need for these devices to be tethered to wall plugs during charging.[133] The Wireless Power Consortium was established in 2008 to develop interoperable standards across manufacturers.[133] Its Qi inductive power standard published in August 2009 enables charging and powering of portable devices of up to 5 watts over distances of 4 cm (1.6 inches).[134] The wireless device is placed on a flat charger plate (which could be embedded in table tops at cafes, for example) and power is transferred from a flat coil in the charger to a similar one in the device.

In 2007, a team led by Marin Soljačić at MIT used coupled tuned circuits made of a 25 cm resonant coil at 10 MHz to transfer 60 W of power over a distance of 2 meters (6.6 ft) (8 times the coil diameter) at around 40% efficiency.[37][40]

See also

Further reading

Books and Articles
Patents

References

  1. ↑ Bush, Stephen F. (2014). Smart Grid: Communication-Enabled Intelligence for the Electric Power Grid. John Wiley & Sons. p. 118. ISBN 1118820231.
  2. ↑ "Wireless energy transfer". Encyclopedia of terms. PC Magazine Ziff-Davis. 2014. Retrieved December 15, 2014.
  3. ↑ New Scientist:Wireless charging for electric vehicles hits the road
  4. 1 2 3 4 5 6 7 8 Shinohara, Naoki (2014). Wireless Power Transfer via Radiowaves. John Wiley & Sons. pp. ix–xiii. ISBN 1118862961.
  5. 1 2 3 4 5 6 7 8 9 10 11 12 13 Gopinath, Ashwin (August 2013). "All About Transferring Power Wirelessly" (PDF). Electronics For You E-zine (EFY Enterprises Pvt. Ltd.): 52–56. Retrieved January 16, 2015.
  6. 1 2 3 4 5 6 7 Sun, Tianjia; Xie, Xiang; Zhihua, Wang (2013). Wireless Power Transfer for Medical Microsystems. Springer Science & Business Media. pp. 5–6. ISBN 1461477026.
  7. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Sazonov, Edward; Neuman, Michael R. (2014). Wearable Sensors: Fundamentals, Implementation and Applications. Elsevier. pp. 253–255. ISBN 0124186661.
  8. 1 2 Shinohara 2014 Wireless Power Transfer via Radiowaves, p. 27
  9. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Valtchev, Stanimir S.; Baikova, Elena N.; Jorge, Luis R. (December 2012). "Electromagnetic Field as the Wireless Transporter of Energy" (PDF). Facta Universitatis Ser. Electrical Engineering (Serbia: University of Niš) 25 (3): 171–181. doi:10.2298/FUEE1203171V. Retrieved December 15, 2014.
  10. 1 2 3 4 5 6 7 8 Ashley, Steven (November 20, 2012). "Wireless recharging: Pulling the plug on electric cars". BBC website. British Broadcasting Corp. Retrieved December 10, 2014. External link in |publisher= (help)
  11. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Tomar, Anuradha; Gupta, Sunil (July 2012). "Wireless power Transmission: Applications and Components". International Journal of Engineering Research & Technology 1 (5). ISSN 2278-0181. Retrieved November 9, 2014.
  12. ↑ "short", "midrange", and "long range" are defined below
  13. ↑ Coleman, Christopher (2004). An Introduction to Radio Frequency Engineerin. Cambridge University Press. pp. 1–3. ISBN 1139452304.
  14. 1 2 3 4 5 Rajakaruna, Sumedha; Shahnia, Farhad; Ghosh, Arindam (2014). Plug In Electric Vehicles in Smart Grids: Integration Techniques. Springer. pp. 34–36. ISBN 981287299X.
  15. 1 2 3 4 5 6 7 8 Agbinya, Johnson I. (2012). Wireless Power Transfer. River Publishers. pp. 1–2. ISBN 8792329233.
  16. 1 2 3 Agbinya (2012) Wireless Power Transfer, p. 126-129
  17. 1 2 3 Umenei, A. E. (June 2011). "Understanding Low Frequency Non-radiative Power Transfer" (PDF). Fulton Innovation, Inc. Retrieved January 3, 2015.
  18. 1 2 Schantz, Hans G. (June 2007). A Real-Time Location System Using Near-Field Electromagnetic Ranging (PDF). 2007 IEEE Antennas and Propagation Society International Symposium, Honolulu, Hawaii, USA. Inst. of Electrical and Electronic Engineers. pp. 3792–3795. Retrieved January 2, 2015.
  19. 1 2 3 4 5 6 7 8 9 10 11 Karalis, Aristeidis; Joannopoulos, J. D.; Soljačić, Marin (January 2008). "Efficient wireless non-radiative mid-range energy transfer" (PDF). Annals of Physics 323 (1): 34–48. arXiv:physics/0611063. Bibcode:2008AnPhy.323...34K. doi:10.1016/j.aop.2007.04.017. Retrieved January 3, 2015.
  20. 1 2 3 4 5 Wong, Elvin (2013). "Seminar: A Review on Technologies for Wireless Electricity" (PDF). HKPC. The Hong Kong Electronic Industries Association Ltd. Retrieved January 3, 2015.
  21. 1 2 3 4 "Typically, an inductive coupled system can transmit roughly the diameter of the transmitter."(p. 4) "...mid-range is defined as somewhere between one and ten times the diameter of the transmitting coil."(p. 2) Baarman, David W.; Schwannecke, Joshua (December 2009). "White paper: Understanding Wireless Power" (PDF). Fulton Innovation. Retrieved January 3, 2015.
  22. 1 2 "...strongly coupled magnetic resonance can work over the mid-range distance, defined as several times the resonator size." Agbinya (2012) Wireless Power Transfer, p. 40
  23. ↑ Smith, Glenn S. (1997). An Introduction to Classical Electromagnetic Radiation. Cambridge University Press. p. 474. ISBN 0521586984.
  24. 1 2 3 4 Tan, Yen Kheng (2013). Energy Harvesting Autonomous Sensor Systems: Design, Analysis, and Practical Implementation. CRC Press. pp. 181–182. ISBN 1439892733.
  25. ↑ Feynman, Richard Phillips; Leighton, Robert B.; Sands, Matthew (1963). The Feynman Lectures on Physics Vol. 1: Mainly Mechanics, Radiation, and Heat. California Institute of Technology. pp. 30.6–30.7. ISBN 0465024939.
  26. ↑ Thorat, Ashwini Anil; Katariya, S. S. (2013). "Solar Power Satellite" (PDF). IOSR Journal of Electronics and Communication Engineering (Int'l Org. of Scientific Research) 5. ISSN 2278-2834. Retrieved January 4, 2015.
  27. ↑ "Lighting Lamp by S-W Radio" (PDF). Short Wave and Television (New York: Popular Book Corp.) 8 (4): 166. August 1937. Retrieved March 18, 2015. on http://www.americanradiohistory.com
  28. ↑ Agbinya, Johnson I. (February 2013). "Investigation of near field inductive communication system models, channels, and experiments" (PDF). Progress In Electromagnetics Research B (EMW Publishing) 49: 130. doi:10.2528/pierb12120512. Retrieved January 2, 2015.
  29. ↑ Bolic, Miodrag; Simplot-Ryl, David; Stojmenovic, Ivan (2010). RFID Systems: Research Trends and Challenges. John Wiley & Sons. p. 29. ISBN 0470975660.
  30. 1 2 3 4 5 6 7 8 9 10 11 12 Davis, Sam (July 2011). "Wireless power minimizes interconnection problems" (PDF). Power Electronics Technology (Penton Electronics Group): 10–14. Retrieved January 16, 2015.
  31. 1 2 3 4 Wilson, Tracy V. (2014). "How Wireless Power Works". How Stuff Works website. InfoSpace LLC. Retrieved December 15, 2014. External link in |work= (help)
  32. 1 2 3 4 5 Puers, R. (2008). Omnidirectional Inductive Powering for Biomedical Implants. Springer Science & Business Media. pp. 4–5. ISBN 1402090757.
  33. ↑ Sun, Tianjia; Xie, Xiang; Zhihua, Wang (2013). Wireless Power Transfer for Medical Microsystems. Springer Science & Business Media. ISBN 1461477026.
  34. ↑ Agbinya (2012) Wireless Power Transfer, p. 140
  35. 1 2 3 4 5 6 7 8 9 10 11 Shinohara (2014) Wireless Power Transfer via Radiowaves, p. 11
  36. 1 2 3 4 Wheeler, L. P. (August 1943). "Tesla's contribution to high frequency". Electrical Engineering (IEEE) 62 (8): 355–357. doi:10.1109/EE.1943.6435874. ISSN 0095-9197. Retrieved May 5, 2015.
  37. 1 2 3 4 5 6 7 Lee, C.K.; Zhong, W.X.; Hui, S.Y.R. (September 5, 2012). Recent Progress in Mid-Range Wireless Power Transfer (PDF). The 4th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2012). Raleigh, North Carolina: Inst. of Electrical and Electronic Engineers. pp. 3819–3821. Retrieved November 4, 2014.
  38. 1 2 Sun, Xie, Wang (2013) Wireless Power Transfer for Medical Microsystems, p. 3
  39. ↑ Beams, D.M.; Nagoorkar, V. (August 2013). "Design and simulation of networks for midrange wireless power transfer". 2013 IEEE 56th International Midwest Symposium on Circuits and Systems (MWSCAS): 509–512. doi:10.1109/MWSCAS.2013.6674697. Retrieved 2015-04-25.
  40. 1 2 Kurs, André; Karalis, Aristeidis; Moffatt, Robert (July 2007). "Wireless Power Transfer via Strongly Coupled Magnetic Resonances" (PDF). Science (American Association for the Advancement of Science) 317: 83–85. Bibcode:2007Sci...317...83K. doi:10.1126/science.1143254. ISSN 1095-9203. PMID 17556549.
  41. 1 2 3 4 5 Huschens, Markus (2012). "Various techniques for wireless charging" (PDF). EETimes-Asia (eMedia Asia Ltd). Retrieved January 16, 2015.
  42. ↑ "World's first!! Production starts for Capacitive Coupling Wireless Power Transmission Module". ECN magazine (Advantage Business Media). October 27, 2011. Retrieved January 16, 2015.
  43. ↑ Meindl, James D. (2008). Integrated Interconnect Technologies for 3D Nanoelectronic Systems. Artech House. pp. 475–477. ISBN 1596932473.
  44. ↑ Harakawa, Kenichi (2014). "Wireless power transmission at rotating and sliding elements by using the capacitive coupling technology" (PDF). 2014 ANSYS Electronic Simulation Expo October 9–10, 2014, Tokyo. ExH Corporation. Retrieved May 5, 2015.
  45. 1 2 Liu, Na (2010). "Coupling games in metamaterials". Retrieved 18 January 2016.
  46. ↑ Camurati, Patrick; Bondar, Henri (2006). "Device for transporting energy by partial influence through a dielectric medium". Google.ch/Patents. TMMS Co. Retrieved 18 January 2016.
  47. ↑ Nawaz, Suddiyas. "Wireless Power Transmission". Academia © 2015. Retrieved 31 December 2015.
  48. ↑ Ray, Subir (2009). An Introduction to High Voltage Engineering. PHI Learning. pp. 19–21. ISBN 978-8120324176.
  49. ↑ "Electrolaser". WiseGeek website. Conjecture Corp. 2015. Retrieved October 25, 2015.
  50. ↑ Maik Scheller, Norman Born, Weibo Cheng, and Pavel Polynkin, 'Channeling the electrical breakdown of air by optically heated plasma filaments', Optica, Vol. 1, Issue 2, pp. 125-128 (2014) DOI: 10.1364/OPTICA.1.000125
  51. ↑ Rakov, Vladimir A.; Uman, Martin A. (2003). Lightning: Physics and Effects. Cambridge Univ. Press. pp. 296–298. ISBN 0521035414.
  52. ↑ Stahmann, J. R. (Oct 1964). "LASER TYPE ULTRA-VIOLET RADIATION FEASIBILITY FOR LIGHTNING AND ATMOSPHERIC PROPAGATION STUDIES". DEFENSE TECHNICAL INFORMATION CENTER OAI. LIGHTNING AND TRANSIENTS RESEARCH INST ST PAUL MN. Retrieved 16 January 2016.
  53. ↑ Lawrence, Jonathan R.; Waugh, D. (2014). Laser Surface Engineering: Processes and Applications. Elsevier. pp. 456–460. ISBN 1782420797.
  54. ↑ Forestier, B.; Houard1, A.; Revel, I.; et al. (2012). "Triggering, guiding and deviation of long air spark discharges with femtosecond laser filament". AIP Advances (American Institute of Physics) 2: 012151. doi:10.1063/1.3690961. Retrieved October 25, 2015.
  55. ↑ Giulietti, Antonio; Ledingham, Kenneth (2010). Progress in Ultrafast Intense Laser Science, Vol. 5. Springer Science and Business Media. pp. 111–114. ISBN 3642038603.
  56. ↑ Franklin, Steve (2015). Non-Lethal Weapon Handbook. Digital Services. pp. 161–162.
  57. ↑ Quick, Darren (28 June 2012). "U.S. Army weapon shoots lightning bolts down laser beams". Gizmag. Gizmag Limited. Retrieved 16 January 2016.
  58. ↑ Kaneshiro, Jason (June 21, 2012). "Picatinny engineers set phasers to 'fry'". news Archives. US Army official website www.mil.gov. Retrieved October 25, 2015.
  59. ↑ Clerici; et al. (June 19, 2015). "Laser-assisted guiding of electrical discharges around objects" (PDF). Science Advances (Amer. Assoc. for the Advancement of Science). doi:10.1126/sciadv.1400111. Retrieved October 25, 2015.
  60. ↑ Shahan, Zach. "ELIX Wireless Rolls Out A 10kW Wireless EV Charger With 92% Efficiency". EVObsession.com. Retrieved 20 July 2015.
  61. ↑ Massa, A. Massa, G. Oliveri, F. Viani, and P. Rocca; Oliveri, Giacomo; Viani, Federico; Rocca, Paolo (June 2013). "Array designs for long-distance wireless power transmission – State-of-the-art and innovative solutions". Proceedings of the IEEE 101 (6): 1464–1481. doi:10.1109/JPROC.2013.2245491.
  62. ↑ G. A. Landis, "Applications for Space Power by Laser Transmission," SPIE Optics, Electro-optics & Laser Conference, Los Angeles CA, 24–28 January 1994; Laser Power Beaming, SPIE Proceedings Vol. 2121, 252–255.
  63. ↑ G. Landis, M. Stavnes, S. Oleson and J. Bozek, "Space Transfer With Ground-Based Laser/Electric Propulsion" (AIAA-92-3213) NASA Technical Memorandum TM-106060 (1992).
  64. ↑ Landis, Geoffrey A. (7–12 May 2006). Reevaluating Satellite Solar Power Systems for Earth (PDF). IEEE 4th World Conference on Photovoltaic Energy Conversion. p. 2. Retrieved 11 May 2012.
  65. ↑ Experimental Airborne Microwave Supported Platform Descriptive Note : Final rept. Jun 64 – Apr 65
  66. ↑ "Scanning the Past: A History of Electrical Engineering from the Past, Hidetsugu Yagi". Ieee.cincinnati.fuse.net. Retrieved 4 June 2009.
  67. ↑ "Space Solar Energy Initiative". Space Island Group. Retrieved 4 June 2009.
  68. ↑ Wireless Power Transmission for Solar Power Satellite (SPS) (Second Draft by N. Shinohara), Space Solar Power Workshop, Georgia Institute of Technology
  69. ↑ Brown., W. C. (September 1984). "The History of Power Transmission by Radio Waves". Microwave Theory and Techniques, IEEE Transactions on 32 (Volume: 32, Issue: 9 On page(s): 1230–1242+): 1230–1242. Bibcode:1984ITMTT..32.1230B. doi:10.1109/TMTT.1984.1132833. ISSN 0018-9480.
  70. ↑ POINT-TO-POINT WIRELESS POWER TRANSPORTATION IN REUNION ISLAND 48th International Astronautical Congress, Turin, Italy, 6–10 October 1997 – IAF-97-R.4.08 J. D. Lan Sun Luk, A. Celeste, P. Romanacce, L. Chane Kuang Sang, J. C. Gatina – University of La Réunion – Faculty of Science and Technology.
  71. ↑ Brown, W.C.; Eves, E.E. (June 1992). "Beamed microwave power transmission and its application to space". IEEE Transactions on Microwave Theory and Techniques 40 (6): 1239–1250. Bibcode:1992ITMTT..40.1239B. doi:10.1109/22.141357.
  72. ↑ "Powering the Next Billion Devices with Wi-Fi". Arxiv. Retrieved 26 May 2015.
  73. ↑ "Power-by-Light". Fraunhofer ISE.
  74. ↑ Sahai., A.; Graham, David (2 June 2011). "Optical wireless power transmission at long wavelengths". IEEE International Conference on Space Optical Systems and Applications (ICSOS), 2011, Santa Monica, CA (Print ISBN 978-1-4244-9686-0): 164–170. doi:10.1109/ICSOS.2011.5783662. ISBN 978-1-4244-9686-0.
  75. ↑ Bett., Andreas W.; Dimroth, Frank; Lockenhoff, Rudiger; Oliva, Eduard; Schubert, Johannes (11 May 2008). "III-V solar cells under monochromatic illumination". 33rd IEEE Photovoltaic Specialists Conference, 2008, San Diego, CA: 1–5. doi:10.1109/pvsc.2008.4922910.
  76. ↑ Smith, David (4 January 2009). "Wireless power spells end for cables". The Observer (London).
  77. ↑ "power transmission via lasers". Laserfocusworld.com. Retrieved 4 June 2009.
  78. ↑ Skillings, Jonathan (23 August 2008). "Laser weapons: A distant target, CNET news August 23, 2008 1:41 pm PDT". News.cnet.com. Retrieved 4 June 2009.
  79. ↑ "Laser Weapons "Almost Ready?" Not!". Defensetech.org. Retrieved 4 June 2009.
  80. ↑ "White Sands testing new laser weapon system, US Army.mil, 30 Jan 2009". Army.mil. 30 January 2009. Retrieved 4 June 2009.
  81. ↑ "Lasers Power Planes, Drones". Defensetech.org. Retrieved 4 June 2009.
  82. ↑ "Riding a Beam of Light". Space.com. 24 October 2005. Retrieved 4 June 2009.
  83. ↑ "Free-Space Laser Propagation: Atmospheric Effects". Ieee.org. Retrieved 4 June 2009.
    Propagation Characteristics of Laser Beams – Melles Griot catalog
    L. C. Andrews and R. L. Phillips, Laser Beam Propagation through Random Media, 2nd ed. (SPIE Press, 2005). Google Books. 2005. ISBN 978-0-8194-5948-0. Retrieved 4 June 2009.
  84. ↑ Dr. Rüdiger Paschotta. "An explanation of Coherence". Rp-photonics.com. Retrieved 4 June 2009.
  85. ↑ "An Evolutionary Path to SPS". Islandone.org. Retrieved 4 June 2009.
  86. ↑ "A Supersynchronous SPS". Geoffreylandis.com. 28 August 1997. Retrieved 4 June 2009.
  87. ↑ "Papers Relating to Space Photovoltaic Power, Power beaming, and Solar Power Satellites". Sff.net. doi:10.1089/153110701753198927. Retrieved 4 June 2009.
  88. ↑ "Limitless clean energy from space". Nss.org. Retrieved 4 June 2009.
  89. ↑ "Power Beaming (Climber) Competition". Spaceward.org. Retrieved 4 June 2009.
  90. ↑ "From Concept to Reality". The Space Elevator. Retrieved 4 June 2009.
    "Space Elevator Tethers Coming Closer". Crnano.typepad.com. 31 January 2009. Retrieved 4 June 2009.
  91. ↑ "Dryden Flight Research Center, Beamed Laser Power For UAVs". Nasa.gov. 7 May 2008. Retrieved 4 June 2009.
  92. 1 2 3 4 Beeby, Stephen; White, Neil (2010). Energy Harvesting for Autonomous Systems. Artech House. pp. 1–2. ISBN 159693719X.
  93. ↑ Richard Fitzpatrick (2007). "Ampère's Circuital Law".
  94. 1 2 Angelo, Joseph A. (2009). Encyclopedia of Space and Astronomy. Infobase Publishing. pp. 292–293. ISBN 1438110189.
  95. ↑ Tesla, Nikola; Marinčić, Aleksandar; Popović, Vojin; Ćirić], Milan (2008). From Colorado Springs to Long Island : research notes : Colorado Springs 1899-1900, New York 1900-1901. Belgrade: Nikola Tesla Museum. p. 449. ISBN 9788681243442. Retrieved 28 February 2016.
  96. ↑ U.S. Patent No. 454,622, Nikola Tesla, SYSTEM OF ELECTRIC LIGHTING, filed June 23, 1891; granted April 25, 1891
  97. ↑ Tesla, Nikola (May 20, 1891) Experiments with Alternate Currents of Very High Frequency and Their Application to Methods of Artificial Illumination, lecture before the American Inst. of Electrical Engineers, Columbia College, New York. Reprinted as a book of the same name by. Wildside Press. 2006. ISBN 0809501627.
  98. ↑ Tesla, Nikola (February 2, 1892) Experiments with Alternate Currents of High Potential and High Frequency, lecture before the Institution of Electrical Engineers, London.
  99. ↑ "Electricity at the Columbian Exposition" By John Patrick Barrett. 1894. Page 168–169.
  100. ↑ Cheney, Margaret; Uth, Robert; Glenn, Jim (1999). Tesla, Master of Lightning. Barnes & Noble Publishing. pp. 90–92. ISBN 0760710058.
  101. ↑ Tesla was secretive about the distances he could transmit electrical energy.  One of his few disclosures was in Tesla, Nikola (June 1900). "The Problem of Increasing Human Energy". Century Magazine (New York: The Century Co.). The figure 7 caption reads:
    "EXPERIMENT TO ILLUSTRATE AN INDUCTIVE EFFECT OF AN ELECTRICAL OSCILLATOR OF GREAT POWER – The photograph shows three ordinary incandescent lamps lighted to full candle-power by currents induced in a local loop consisting of a single wire forming a square of fifty feet each side, which includes the lamps, and which is at a distance of one hundred feet from the primary circuit energized by the oscillator.  The loop likewise includes an electrical condenser, and is exactly attuned to the vibrations of the oscillator, which is worked at less than five percent of its total capacity."
  102. ↑ "The Problem of Increasing Human Energy". The Essential Tesla. Wilder Publications. December 18, 2008. ISBN 978-1934451762.
  103. 1 2 3 4 Broad, William J. (May 4, 2009). "A Battle to Preserve a Visionary’s Bold Failure". New York Times (New York: The New York Times Co.). p. D1. Retrieved November 19, 2014.
  104. ↑ Carlson 2013 Tesla: Inventor of the Electrical Age, p. 209-210
  105. ↑ Tesla, Nikola (March 5, 1904). "The Transmission of Electric Energy Without Wires". Electrical World and Engineer (McGraw Publishing Co.) 43: 23760–23761. Retrieved November 19, 2014., reprinted in Scientific American Supplement, Munn and Co., Vol. 57, No. 1483, June 4, 1904, p. 23760-23761
  106. ↑ Tesla, Nikola (November 30, 1898). "Tesla Describes His Efforts in Various Fields of Work". Electrical Review - New York. In The Sun, New York, November 21, 1898.
    Starting from two facts that the earth is a conductor insulated in space, and that a body cannot be charged without causing an equivalent displacement of electricity in the earth, I undertook to construct a machine suited for creating as large a displacement as possible of the earth's electricity.
  107. ↑ The Feynman Lectures on Physics, R.P. Feynman, R.B. Leighton, M. Sands, Addison-Wesley Publishing Co., 1964, Vol. 2, chapter 9.
  108. ↑ U.S. Patent No. 645,576, Nikola Tesla, SYSTEM OF TRANSMISSION OF ELECTRICAL ENERGY, filed September 2, 1897; granted March 20, 1900
  109. ↑ U.S. Patent No. 649,621, Nikola Tesla, APPARATUS FOR TRANSMISSION OF ELECTRICAL ENERGY, filed September 2, 1897; granted May 15, 1900
  110. ↑ Cooper, Drury W., internal document of the law firm Kerr, Page & Cooper, New York City, 1916. (In Anderson, Leland (1992). Nikola Tesla on His Work with Alternating Currents and Their Application to Wireless Telegraphy, Telephony, and Transmission of Power: An Extended Interview. Sun Publishing Company. p. 110. ISBN 1893817016.)
    At that time I was absolutely sure that I could put up a commercial plant, if I could do nothing else but what I had done in my laboratory on Houston Street; but I had already calculated and found that I did not need great heights to apply this method.  My patent says that I break down the atmosphere "at or near" the terminal.  If my conducting atmosphere is 2 or 3 miles above the plant, I consider this very near the terminal as compared to the distance of my receiving terminal, which may be across the Pacific.  That is simply an expression.  I saw that I would be able to transmit power provided I could construct a certain apparatus -- and I have, as I will show you later.  I have constructed and patented a form of apparatus which, with a moderate elevation of a few hundred feet, can break the air stratum down.
  111. ↑ Sewall, Charles Henry (1903). Wireless telegraphy: its origins, development, inventions, and apparatus. D. Van Nostrand Co. pp. 38–42.
  112. ↑ Leyh, G. E.; Kennan, M. D. (September 28, 2008). Efficient wireless transmission of power using resonators with coupled electric fields (PDF). NAPS 2008 40th North American Power Symposium, Calgary, September 28–30, 2008. Inst. of Electrical and Electronic Engineers. pp. 1–4. doi:10.1109/NAPS.2008.5307364. ISBN 978-1-4244-4283-6. Retrieved November 20, 2014.
  113. ↑ Carlson 2013 Tesla: Inventor of the Electrical Age, Ch. 14 & 15, p. 302-367
  114. ↑ Hawkins, Lawrence A. (February 1903). "Nikola Tesla: His Work and Unfulfilled Promises". The Electrical Age 30 (2): 107–108. Retrieved November 4, 2014.
  115. 1 2 Carlson, W. Bernard (2013). Tesla: Inventor of the Electrical Age. Princeton University Press. pp. 294, 301. ISBN 1400846552.
  116. 1 2 3 4 5 Cheney, Margaret; Uth, Robert; Glenn, Jim (1999). Tesla, Master of Lightning. Barnes & Noble Publishing. pp. 90–92. ISBN 0760710058.
  117. 1 2 3 4 5 6 Coe, Lewis (2006). Wireless Radio: A History. McFarland. p. 112. ISBN 0786426624.
  118. 1 2 3 4 5 6 7 8 Brown, William C. (1984). "The history of power transmission by radio waves". MTT-Trans. on Microwave Theory and Technique (Inst. of Electrical and Electronic Engineers) 32 (9): 1230–1234. Retrieved November 20, 2014.
  119. 1 2 Dunning, Brian (January 15, 2013). "Did Tesla plan to transmit power world-wide through the sky?". The Cult of Nikola Tesla. Skeptoid.com. Retrieved November 4, 2014.
  120. ↑ "Life and Legacy: Colorado Springs". Tesla: Master of Lightning – companion site for 2000 PBS television documentary. PBS.org, US Public Broadcasting Service] website. 2000. Retrieved November 19, 2014.
  121. 1 2 Dunning, Brian (January 15, 2013). "Did Tesla cause a field of light bulbs 26 miles away to illuminate wirelessly?". The Cult of Nikola Tesla. Skeptoid.com. Retrieved November 4, 2014.
  122. ↑ Tesla, Nikola; Marinčić, Aleksandar, Ed. (1977). Colorado Springs Notes, 1899-1900. Beograd, Yugoslavia: The Nikola Tesla Museum.
  123. ↑ O'Neill, John J. (1944). Prodigal Genius: The life of Nikola Tesla. Ives Washburn, Inc. p. 193.
  124. ↑ Wearing, Judy (2009). Edison's Concrete Piano: Flying Tanks, Six-Nippled Sheep, Walk-On-Water Shoes, and 12 Other Flops From Great Inventors. ECW Press. p. 98. ISBN 1554905516.
  125. 1 2 Curty, Jari-Pascal; Declercq, Michel; Dehollain, Catherine; Joehl, Norbert (2006). Design and Optimization of Passive UHF RFID Systems. Springer. p. 4. ISBN 0387447105.
  126. ↑ Belohlavek, Peter; Wagner, John W. (2008). Innovation: The Lessons of Nikola Tesla. Blue Eagle Group. pp. 78–79. ISBN 9876510096.
  127. ↑ "Dennis Papadopoulos interview". Tesla: Master of Lightning – companion site for 2000 PBS television documentary. PBS.org, US Public Broadcasting Service website. 2000. Retrieved November 19, 2014.
  128. ↑ Glaser, Peter E. (November 22, 1968). "Power from the Sun: Its future" (PDF). Science (American Assoc. for the Advancement of Science) 162 (3856): 857–861. Bibcode:1968Sci...162..857G. doi:10.1126/science.162.3856.857. Retrieved November 4, 2014.
  129. 1 2 Dickinson, Richard M. (1976). "Performance of a high-power 2.388 GHz receiving array in wireless power transmission over 1.54 km." (PDF). MTT-S Int'l Microwave Symposium Digest: 139–141. doi:10.1109/mwsym.1976.1123672. Retrieved November 9, 2014.
  130. ↑ US Patent No. 527857A, Maurice Hutin, Maurice Leblanc, Transformer system for electric railways, filed November 16, 1892; granted October 23, 1894
  131. ↑ US Patent No. 3713148A, Mario W. Cardullo, William L. Parks, Transponder apparatus and system, filed May 21, 1970; granted January 23, 1973
  132. ↑ Koelle, A. R.; Depp, S. W.; Freyman, R. W. (1975). "Short-range radio-telemetry for identification, using modulated RF backscatter". Proc. of the IEEE (Inst. of Electrical and Electronic Engineers) 63 (8): 1260–1261. doi:10.1109/proc.1975.9928.
  133. 1 2 Sayer, Peter (Dec 19, 2008). "Wireless Power Consortium to Unleash Electronic Gadgets". PCWorld (IDG Consumer and SMB). Retrieved December 8, 2014.
  134. ↑ "Global Qi Standard Powers Up Wireless Charging". PRNewswire (UBM plc). September 2, 2009. Retrieved December 8, 2014.

External links

This article is issued from Wikipedia - version of the Wednesday, April 13, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.