Rockwell X-30

X-30 NASP
Artist's Concept of the X-30 entering orbit
Role Single-stage-to-orbit (SSTO) spaceplane
Manufacturer Rockwell International
Status Cancelled in 1993
Primary user NASA



The Rockwell X-30 was an advanced technology demonstrator project for the National Aero-Space Plane (NASP), part of a United States project to create a single-stage-to-orbit (SSTO) spacecraft and passenger spaceliner.[1] It was cancelled in the early 1990s, before a prototype was completed, although much development work in advanced materials and aerospace design was completed. While a goal of a future NASP was a passenger liner capable of two-hour flights from Washington to Tokyo, the X-30 was planned for a crew of two and oriented towards testing.

Development

The NASP concept is thought to have been derived from the "Copper Canyon" project of the Defense Advanced Research Projects Agency (DARPA), from 1982 to 1985. In his 1986 State of the Union address, President Ronald Reagan called for "a new Orient Express that could, by the end of the next decade, take off from Dulles Airport, accelerate up to 25 times the speed of sound, attaining low earth orbit or flying to Tokyo within two hours."

Research suggested a maximum speed of Mach 8 for scramjet based aircraft, as the vehicle would generate heat due to atmospheric friction, which would expend considerable energy. The project showed that much of this energy could be recovered by passing hydrogen over the skin and carrying the heat into the combustion chamber: Mach 20 then seemed possible. The result was a program funded by NASA, and the United States Department of Defense (funding was approximately equally divided among NASA, DARPA, the US Air Force, the Strategic Defense Initiative Office (SDIO) and the US Navy).[2]

In April 1986 McDonnell Douglas, Rockwell International, and General Dynamics were awarded contracts (each no more than $35 M) to develop technology for a hypersonic air-breathing SSTO vehicle/airframe.[2] Rocketdyne and Pratt & Whitney were each awarded contracts of $175 M to develop engines/propulsion.[2] The airframe contractors would compete and 2 or 3 would be eliminated after a year.[2] The plan was that 42 months later (end 1989) contracts would be awarded to build the flight demonstrator vehicle.[2]

In 1990, the companies joined under the direction of Rockwell International to develop the craft to deal with the technical and budgetary obstacles. Development on the X-30, as it was then designated.

Despite progress in developing the necessary structural and propulsion technology, NASA still had substantial problems to solve. The Department of Defense wanted it to carry a crew of two and even a small payload. The demands of being a human-rated vehicle, with the instrumentation, environmental control system, and safety equipment, made X-30 larger, heavier, and more expensive than required for a technology demonstrator. The X-30 program was terminated amid budget cuts and technical concerns in 1993.

A more modest hypersonic program culminated in the unmanned X-43 "Hyper-X".

A detailed 1/3rd scale (50 foot long) mock-up of the X-30 was built by engineering students at Mississippi State University's Raspet Flight Research Lab in Starkville, Mississippi.[3][4][5] The mock-up is on display at the Aviation Challenge campus of the U.S. Space Camp facility in Huntsville, Alabama.

Design

1986 artist's concept of the NASP on liftoff
Artist's Concept of the X-30 in orbit
Artist's Concept of the X-30 on reentry
X-30 model in a wind tunnel

The X-30 configuration was a highly integrated engine. The shovel-shaped forward fuselage generated a shock wave to compress air before it entered the engine. The aft fuselage formed an integrated nozzle to expand the exhaust. The engine between was a scramjet engine. At the time, however, no scramjet engine of the kind was close to operational.

The aerodynamic configuration was an example of a waverider. Most of the lift was generated by the fuselage by compression lift. The "wings" were small fins providing trim and control. This configuration was efficient for high-speed flight, but would have made take-off and slow-speed flight difficult.

Temperatures on the airframe were expected to be 980 °C (1800 °F) over a large part of the surface, with maxima of more than 1650 °C (3000 °F) on the leading edges and portions of the engine. This required the development of high temperature lightweight materials, including alloys of titanium and aluminum known as gamma and alpha titanium aluminide, advanced carbon/carbon composites, and titanium metal matrix composite (TMC) with silicon carbide fibers. Titanium matrix composites were used by McDonnell Douglas to create a representative fuselage section called "Task D". The Task D test article was four feet high by eight feet wide by eight feet long. A carbon/epoxy cryogenic hydrogen tank was integrated with the fuselage section and the whole assembly, including volatile and combustible hydrogen, was successfully tested with mechanical loads and a temperature of 820 °C (1500 °F) in 1992, just before program cancellation.

Specifications (X-30 as designed)

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

References

  1. ↑ Chang, Kenneth (20 October 2014). "25 Years Ago, NASA Envisioned Its Own ‘Orient Express’". New York Times. Retrieved 21 October 2014.
  2. 1 2 3 4 5 National Aero-space Plane Program Fact Sheet (URL needs archiving)
  3. ↑ Mississippi State Wins Aero-Space Plane Mockup Competition
  4. ↑ NASP X-30
  5. ↑ X-30 National Aero-Space Plane Mockup Rolls Out

External links

Wikimedia Commons has media related to X-30.
This article is issued from Wikipedia - version of the Tuesday, April 26, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.