BL 12-inch railway gun

Ordnance BL 12 inch Gun Mk IX on truck, railway

12 inch Mk IX W railway gun on Armstrong Mk II mounting, Méaulte, France 1916
Type Railway gun
Place of origin United Kingdom
Service history
In service 1915 - 1930 (Rail)
Used by United Kingdom
Wars First World War
Production history
Manufacturer Woolwich Arsenal (guns)
Vickers & Elswick Ordnance Company (carriage)
Produced 1906 (guns)
Number built 4 (Rail)
Variants mountings Mk I, Mk II
Specifications
Barrel length Bore: 40 ft (12.192 m) L/40

Shell HE; 850 lb (385.55 kg)
Calibre 12-inch (304.8 mm)
Breech Welin screw
Recoil Hydro - spring, 34 inches (863.6 mm)[1]
Carriage Railway truck
Elevation 0° - 30°[1]
Traverse 1° L & R[1]
Muzzle velocity 2,610 ft/s (796 m/s)[1]
Maximum firing range 32,700 yards (29,900 m)[1]
Filling Amatol
Filling weight 94 lb (42.64 kg)

The Ordnance BL 12 inch gun Mk IX on truck, railway mounted surplus 12 inch Mk IX W naval guns, manufactured by Woolwich Arsenal in 1906,[2] on various railway platforms to provide mobile long-range heavy artillery on the Western Front in World War I.

History

Vickers mounted 2 Mk IX W guns on slightly different railway mountings, Mk I, from September 1915. They are both identified by the open-frame appearance, recoil buffers above the barrel and the bogies with frames between the wheels similar to locomotive bogies. One mounting has a distinctive diamond-shape from the side and has a warping winch on the front; the other's carriage has a more squared-off profile with no warping winch at the front.

Elswick Ordnance Company (Armstrongs) mounted 2 more on its own design of Mk II railway mounting, delivered to the Western Front in August 1916. They are identified by the boxed-in frame appearance, recoil buffers below the barrel and the bogies with frames outside the wheels.

Design

The gun cars allowed only 1° left and right traverse, achieved by pivoting the entire gun car body about the forward bogies, in the two Vickers carriages, or about the rear bogies in the Armstrong carriages. Like most railway guns in the war it was operated on specially-constructed curved sections of track and moved forward or backward to point it at a new target. Fine adjustment could then be achieved by onboard traversing, which at the gun's maximum range covered an arc of about 1,000 yards.[3]

The initial shock of firing was absorbed by a hydro-spring mechanism, allowing 34 inches of recoil within the gun mounting. The remaining recoil energy was absorbed by allowing the entire railway wagon to roll backwards 40 feet[4] (Vickers carriage) or 3-4 yards[5] (Armstrong carriage) against locked brakes. This "rolling recoil" system allowed the gun to be operated without the need to construct a pit with a strong static platform below the gun for it to recoil into and to allow transmission of all the recoil force directly to the ground as was typical of many large US and French railway guns.

Combat service

Crew of 12-inch (304.8 mm) railway gun on Vickers Mk I mounting, Woesten, 23 August 1917, Third Battle of Ypres

At the end of World War I, the dispositions of the guns on the Western Front were : 1 gun of 92 Battery and 1 gun of 543 Battery with First Army i.e. Artois; 1 gun of 92 Battery with Third Army i.e. Somme; 1 gun of 543 Battery with Fourth Army i.e. Somme.[6]

See also

Notes and references

  1. 1 2 3 4 5 Hogg & Thurston 1972, Page 193
  2. Hogg & Thurston 1972, Page 192. At least 1 of the guns may have been manufactured during World War I, as 'British 12"/40 (30.5 cm) Mark IX' states that only 3 Mk IXw guns were actually originally built but that 6 more were made during World War I.
  3. Miller 1921, page 154
  4. Miller 1292, page 149
  5. Miller 1921, page 155
  6. Farndale 1986

Bibliography

External links

Wikimedia Commons has media related to BL 12 inch Railway Gun.
This article is issued from Wikipedia - version of the Wednesday, November 25, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.