Bavarian B V (articulated)

Bavarian B V (articulated)
Number(s) PHÖNIX
Quantity 1
Manufacturer Joseph Anton von Maffei
Year(s) of manufacture 1857
Wheel arrangement 0-6-6
Axle arrangement B3' n2
Gauge 1,435 mm
Length over buffers 3,809 mm
Overall wheelbase 8,534 mm
Empty weight ca. 18 t
Service weight incl. tender ca. 45 t
Adhesive weight ca. 21 t
Top speed 70 km/h
No. of cylinders 2
Cylinder bore 306 mm
Piston stroke 610 mm
Boiler Overpressure 7 atm
Grate area 1,25 m²
Evaporative heating area ca. 90 m²
Water capacity 5.66 cubic metres
Fuel Wood, 5 cubic metres

The articulated variant of the Bavarian B V was an unusual, 0-6-6, steam locomotive in the Royal Bavarian State Railways (Königlich Bayerische Staats-Eisenbahnen).

The articulated B V was a four-coupled locomotive built by Maffei at their own expense. It was based on the Class B V but, instead of having a third coupled axle, the back of the engine was supported by the front of the tender, called in German a Stütztender or "supporting tender". This was similar to the earlier Engerth design which articulated the tender with the main locomotive frame, allowing some of the weight of the fuel and water to be carried on the driving wheels to improve adhesion. Because the tender was articulated, rather than directly attached to the frame, the locomotive could traverse relatively sharp curves, while still enjoying the advantage of the additional adhesive weight gain. The articulated B V was not a success; it's riding qualities were poor and only one example was produced.

Source

See also

External links

This article is issued from Wikipedia - version of the Saturday, December 08, 2012. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.