Braille embosser

A braille embosser is an impact printer that renders text as tactile braille cells. Using braille translation software, a document can be embossed with relative ease, making braille production efficient and cost-effective.

Blind users tend to call other printers "ink printers," to distinguish them from their braille counterparts. This is often the case regardless of the type of printer being discussed (e.g., thermal printers being called "ink printers" even though they use no ink).

As with ink printers and presses, embossers range from those intended for consumers to those used by large publishers. Thus, an embosser can cost roughly anywhere from US$2,000 to $150,000.

The fastest industrial braille embosser is probably the $77,000 Belgian-made NV Interpoint 55, first produced in 1991, which uses a separate air compressor to drive the embossing head and can output up to 800 braille characters per second. Adoption was slow at first; in 2000 the National Federation of the Blind said there were only three of these in the USA, one owned by the NFB itself and the other two by the Watchtower Bible and Tract Society.[1] As of 2008 there are more than 60 in use across the world.[2]

Smaller desktop braille embossers are more common and can be found in libraries, universities, and specialist education centers, as well as being privately owned by blind individuals. Particularly with some lower-priced embossers, it may be necessary to use an acoustic cabinet or hood to dampen the noise level.

Braille embossers usually need special braille paper which is thicker and more expensive than normal paper. Some high-end embossers are capable of printing on normal paper. Embossers can be either one-sided or two-sided. Duplex embossing requires lining up the dots so they do not overlap (called "interpoint" because the points on the other side are placed in between the points on the first side).

Once one copy of a document has been produced, printing further copies is often quicker by means of a device called a thermoform, which produces copies on soft plastic. However the resulting braille is not as easily readable as braille that has been freshly embossed, in much the same way that a poor-quality photocopy is not as readable as the original. Hence large publishers do not generally use thermoforms.

See also

References

This article is based on material taken from the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the "relicensing" terms of the GFDL, version 1.3 or later.

External links

This article is issued from Wikipedia - version of the Thursday, October 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.