Katana

For the DC Comics character, see Katana (comics). For the Mortal Kombat character, see Kitana. For other uses, see Katana (disambiguation).
Katana (刀)

Katana signed by Masamune with an inscription (城和泉守所持) in gold inlay, Kamakura period, 14th century, blade length: 70.6 cm[1]
Type Sword
Place of origin Japan
Production history
Produced Muromachi period (1392–1573) to present
Specifications
Weight 1.1–1.3 kg
Blade length approx. 60–73 cm (23 5⁄8–28 3⁄4 in)
Blade type Curved, slender, single-edged, tapered
Hilt type Two-handed swept, with circular or squared guard

Historically, katana (刀) were one of the traditionally made Japanese swords (日本刀 nihontō)[2][3] that were used by the samurai of feudal Japan.[4] The katana is characterized by its distinctive appearance: a curved, slender, single-edged blade with a circular or squared guard and long grip to accommodate two hands.

History

Japanese Edo period wood block print of a samurai with a tachi.

The production of swords in Japan is divided into specific time periods:

The first use of "katana" (gatana) as a word to describe a long sword that was different from a tachi occurs as early as the Kamakura Period (1185–1333).[7] These references to "uchigatana" and "tsubagatana" seem to indicate a different style of sword, possibly a less costly sword for lower-ranking warriors. The evolution of the tachi into the katana seems to have started during the early Muromachi period (1337 to 1573). Starting around the year 1400, long swords signed with the "katana" signature were made. This was in response to samurai wearing their tachi in what is now called "katana style" (cutting edge up). Japanese swords are traditionally worn with the signature facing away from the wearer. When a tachi was worn in the style of a katana, with the cutting edge up, the tachi's signature would be facing the wrong way. The fact that swordsmiths started signing swords with a katana signature shows that some samurai of that time period had started wearing their swords in a different manner.[8][9]

The rise in popularity of katana amongst samurai came about due to the changing nature of close-combat warfare. The quicker draw of the sword was well suited to combat where victory depended heavily on fast response times. The katana further facilitated this by being worn thrust through a belt-like sash (obi) with the sharpened edge facing up. Ideally, samurai could draw the sword and strike the enemy in a single motion. Previously, the curved tachi had been worn with the edge of the blade facing down and suspended from a belt.[7][10]

The length of the katana blade varied considerably during the course of its history. In the late 14th and early 15th centuries, katana blades tended to have lengths between 70 and 73 cm (27½ and 28½ in). During the early 16th century, the average length approached closer to 60 cm (23½ in). By the late 16th century, the average length returned to approximately 73 cm (28½ in).

The katana was often paired with a similar smaller companion sword, such as a wakizashi or it could also be worn with the tantō, a smaller, similarly shaped dagger. The pairing of a katana with a smaller sword is called the daishō. Only samurai could wear the daisho: it represented the social power and personal honor of the samurai.[7][10][11]

Modern katana (gendaito)

During the Meiji period, the samurai class was gradually disbanded, and the special privileges granted to them were taken away including the right to carry swords in public. The Haitōrei Edict in 1876 forbade the carrying of swords in public except for certain individuals, such as former samurai lords (daimyo), the military, and police.[12] Skilled swordsmiths had trouble making a living during this period as Japan modernized its military, and many swordsmiths started making other items, such as farm equipment, tools, and cutlery. Military action by Japan in China and Russia during the Meiji period helped revive interest in swords, but it was not until the Showa period that swords were produced on a large scale again.[13] Japanese military swords produced between 1875 and 1945 are referred to as guntō (military swords).[14]

During the pre-World War II military buildup and throughout the war, all Japanese officers were required to wear a sword. Traditionally made swords were produced during this period, but in order to supply such large numbers of swords, blacksmiths with little or no knowledge of traditional Japanese sword manufacture were recruited. In addition, supplies of the Japanese steel (tamahagane) used for swordmaking were limited, so several other types of steel were also used. Quicker methods of forging were also used, such as the use of power-hammers, and quenching the blade in oil, rather than hand forging and water quenching. The non-traditionally made swords from this period are called "showato," after the regnal name of the Emperor Hirohito, and in 1937, the Japanese government started requiring the use of special stamps on the tang (nakago) to distinguish these swords from traditionally made swords. During this period of war, older antique swords were remounted for use in military mounts. Presently, in Japan, showato are not considered to be "true" Japanese swords, and they can be confiscated. Outside Japan, however, they are collected as historical artifacts.[12][13][15]

Post-World War II

Japanese girl practicing iaido with a modern training katana or iaitō. This sword was custom made in Japan according to the weight and size of the student. The blade is made of aluminum alloy and it lacks a sharp edge for the student's safety.

In Japan, from 1945 to 1953, sword manufacture and sword-related martial arts were banned. Many swords were confiscated and destroyed, and swordsmiths were not able to make a living. Since 1953, Japanese swordsmiths have been allowed to work, but with severe restrictions: swordsmiths must be licensed and serve a five-year apprenticeship, and only licensed swordsmiths are allowed to produce Japanese swords (nihonto), only two longswords per month are allowed to be produced by each swordsmith, and all swords must be registered with the Japanese Government.[16]

Outside Japan, some of the modern katanas being produced by western swordsmiths use modern steel alloys, such as L6 and A2. These modern swords replicate the size and shape of the Japanese katana, and are used by martial artists for Iaido and even for cutting practice, called (tameshigiri). The use of modern steel and technology can create strong blades without the risk of damaging or destroying the artisan's hard work.

Mass-produced swords including iaitō and shinken in the shape of katana are available from many countries, though China dominates the market.[17] These types of swords are typically mass-produced and made with a wide variety of steels and methods.

Description

Antique Japanese (samurai) daishō, the traditional pairing of two Japanese swords which were the symbol of the samurai, showing the traditional Japanese sword cases (koshirae) and the difference in size between the katana (top) and the smaller wakizashi (bottom).

The katana is generally defined as the standard sized, moderately curved (as opposed to the older "tachi" style featuring more curvature) Japanese sword with a blade length greater than 60 cm (23 1⁄2 inches).[7] It is characterized by its distinctive appearance: a curved, slender, single-edged blade with a circular or squared guard (tsuba) and long grip to accommodate two hands.[7] It has historically been associated with the samurai of feudal Japan.

With a few exceptions, katana and tachi can be distinguished from each other, if signed, by the location of the signature (mei) on the tang (nakago). In general, the mei should be carved into the side of the tang which would face outward when the sword was worn. Since a tachi was worn with the cutting edge down, and the katana was worn with the cutting edge up, the mei would be in opposite locations on the tang.[18]

Western historians have said that katana were among the finest cutting weapons in world military history.[19] [20][21]

Etymology and loanwords

"Katana" is the term now used to describe nihontō that are 2 shaku (606 mm / 23.9 in) and longer, also known as "dai" or "daito" among Western sword enthusiasts although daito is a generic name for any long sword.[22]

As Japanese does not have separate plural and singular forms, both "katanas" and "katana" are considered acceptable forms in English.[23]

Pronounced [katana], the kun'yomi (Japanese reading) of the kanji 刀, originally meaning dao or knife/saber in Chinese, the word has been adopted as a loanword by the Portuguese language.[24] In Portuguese the designation (spelled catana) means "large knife" or machete.[24]

Forging and construction

Cross sections of Japanese sword blade lamination methods

Katanas are traditionally made from a specialized Japanese steel called tamahagane,[25] which is created from a traditional smelting process that results in several, layered steels with different carbon concentrations.[26] This process helps remove impurities and even out the carbon content of the steel. The age of the steel plays a role in the ability to remove impurities, with older steel, having a higher oxygen concentration, being more easily stretched and rid of impurities during hammering, resulting in a stronger blade.[27] The smith begins by folding and welding pieces of high and low carbon steel several times to work out most of the impurities. The resulting block of steel is then drawn out to form a billet.

At this stage, it is only slightly curved or may have no curve at all. The gentle curvature of a katana is attained by a process of differential hardening or differential quenching: the smith coats the blade with several layers of a wet clay slurry, which is a special concoction unique to each sword maker, but generally composed of clay, water and any or none of ash, grinding stone powder, or rust. The edge of the blade is coated with a thinner layer than the sides and spine of the sword, heated, and then quenched in water (some sword makers use oil to quench the blade). The slurry causes only the blade's edge to be hardened and also causes the blade to curve due to the difference in densities of the micro-structures in the steel.[10] When steel with a carbon content of 0.7 percent is heated beyond 750 °C, it enters the austenite phase. When austenite is cooled very suddenly by quenching in water, the structure changes into martensite, which is a very hard form of steel. When austenite is allowed to cool slowly, its structure changes into a mixture of ferrite and pearlite which is softer than martensite.[28][29] This process also creates the distinct line down the sides of the blade called the hamon, which is made distinct by polishing. Each hamon and each smith's style of hamon is distinct.[10]

After the blade is forged, it is then sent to be polished. The polishing takes between one and three weeks. The polisher uses finer and finer grains of polishing stones in a process called glazing, until the blade has a mirror finish. However, the blunt edge of the katana is often given a matte finish to emphasize the hamon.[10]

Usage in martial arts

Katana were used by samurai in practicing several martial arts and modern martial artists still use a variety of katana. Martial arts in which training with katana is used include Iaijutsu, battōjutsu, iaidō, kenjutsu, kendo, aikido, ninjutsu, and Tenshin Shōden Katori Shintō-ryū.[30][31][32]

Storage and maintenance

If mishandled in its storage or maintenance, the katana may become irreparably damaged. The blade should be stored horizontally in its sheath, curve down and edge facing upward to maintain the edge. It is extremely important that the blade remain well-oiled, powdered and polished, as the natural moisture residue from the hands of the user will rapidly cause the blade to rust if not cleaned off. The traditional oil used is choji oil (99% mineral oil and 1% clove oil for fragrance). Similarly, when stored for longer periods, it is important that the katana be inspected frequently and aired out if necessary in order to prevent rust or mold from forming (mold may feed off the salts in the oil used to polish the katana).[33]

Ownership and trade restrictions

Republic of Ireland

Under the Firearms and Offensive Weapons Act 1990 (Offensive Weapons) (Amendment) Order 2009, katanas made post-1953 are illegal unless made by hand according to traditional methods.[34]

United Kingdom

As of April 2008, the British government added swords with a curved blade of 50 cm (20 in) or over in length ("the length of the blade shall be the straight line distance from the top of the handle to the tip of the blade") to the Offensive Weapons Order.[35] This ban was a response to reports that samurai swords were used in more than 80 attacks and 4 killings over the preceding four years.[36] Those who violate the ban would be jailed up to six months and charged a fine of £5,000. Martial arts practitioners, historical re-enactors and others may still own such swords. The sword can also be legal provided it was made in Japan before 1954, or was made using traditional sword making methods. It is also legal to buy if it can be classed as a "martial artist's weapon". This ban applies to England, Wales, Scotland and Northern Ireland. This ban was amended in August 2008 to allow sale and ownership without licence of 'traditional' hand-forged katana.[37]

Gallery

See also

References

  1. ↑ 刀　金象嵌銘城和泉守所持　正宗磨上本阿 (in Japanese). National Institutes for Cultural Heritage.
  2. ↑ Manouchehr Moshtagh Khorasani (2008). The Development of Controversies: From the Early Modern Period to Online Discussion Forums. Peter Lang. p. 150. ISBN 978-3-03911-711-6.
  3. ↑ Evans Lansing Smith; Nathan Robert Brown (2008). The Complete Idiot's Guide to World Mythology. Alpha Books. p. 144. ISBN 978-1-59257-764-4.
  4. ↑ Kokan Nagayama, trans. Kenji Mishina (1997). The Connoisseur's Book of Japanese Swords. Tokyo, Japan: Kodansha International Ltd. ISBN 4-7700-2071-6.
  5. ↑ Clive Sinclaire (1 November 2004). Samurai: The Weapons and Spirit of the Japanese Warrior. Lyons Press. pp. 40–58. ISBN 978-1-59228-720-8.
  6. ↑ トム岸田 (24 September 2004). 靖国刀. Kodansha International. p. 42. ISBN 978-4-7700-2754-2.
  7. 1 2 3 4 5 Kanzan Sato (1983). The Japanese Sword: A Comprehensive Guide (Japanese arts Library). Japan: Kodansha International. p. 220. ISBN 978-0-87011-562-2.
  8. ↑ Stephen Turnbull (8 February 2011). Katana: The Samurai Sword. Osprey Publishing. pp. 22–. ISBN 978-1-84908-658-5.
  9. ↑ Kōkan Nagayama (1997). The Connoisseur's Book of Japanese Swords. Kodansha International. p. 28. ISBN 978-4-7700-2071-0.
  10. 1 2 3 4 5 Leon Kapp, Hiroko Kapp, Yoshindo Yoshihara (1987). The Craft of the Japanese Sword. Japan: Kodansha International. p. 167. ISBN 978-0-87011-798-5.
  11. ↑ Oscar Ratti and Adele Westbrook (1991). Secrets of the Samurai: The Martial Arts of Feudal Japan. Tuttle Publishing. p. 484. ISBN 978-0-8048-1684-7.
  12. 1 2 Kōkan Nagayama (1997). The Connoisseur's Book of Japanese Swords. Kodansha International. p. 43. ISBN 978-4-7700-2071-0.
  13. 1 2 Clive Sinclaire (1 November 2004). Samurai: The Weapons and Spirit of the Japanese Warrior. Lyons Press. pp. 58–59. ISBN 978-1-59228-720-8.
  14. ↑ John Yumoto (13 December 2013). The Samurai Sword: A Handbook. Tuttle Publishing. pp. 6, 70. ISBN 978-1-4629-0706-9.
  15. ↑ Leon Kapp; Hiroko Kapp; Yoshindo Yoshihara (January 2002). Modern Japanese Swords and Swordsmiths: From 1868 to the Present. Kodansha International. pp. 58–70. ISBN 978-4-7700-1962-2.
  16. ↑ Clive Sinclaire (1 November 2004). Samurai: The Weapons and Spirit of the Japanese Warrior. Lyons Press. p. 60. ISBN 978-1-59228-720-8.
  17. ↑ Steve Shackleford (7 September 2010). "Sword Capitol of the World". Spirit Of The Sword: A Celebration of Artistry and Craftsmanship. Iola, Wisconsin: Adams Media. p. 23. ISBN 1-4402-1638-X.
  18. ↑ 土子民夫 (May 2002). 日本刀21世紀への挑戦. Kodansha International. p. 30. ISBN 978-4-7700-2854-9.
  19. ↑ Stephen Turnbull (2012). Katana: The Samurai Sword. Osprey Publishing. p. 4. ISBN 9781849086585.
  20. ↑ Roger Ford (2006). Weapon: A Visual History of Arms and Armor. DK Publishing. pp. 66, 120. ISBN 9780756622107.
  21. ↑ Anthony J. Bryant and Angus McBride (1994) Samurai 1550–1600. Osprey Publishing. p. 49. ISBN 1855323451
  22. ↑ Sun-Jin Kim (1996). Tuttle Dictionary Martial Arts Korea, China & Japan. Tuttle Publishing. p. 61. ISBN 978-0-8048-2016-5.
  23. ↑ Adrian Akmajian, Richard A. Demers, Ann K. Farmer, Robert M. Harnish (2001). Linguistics: An Introduction to Language and Communication. Massachusetts: The MIT Press. p. 624. ISBN 9780262511230.
  24. 1 2 Sebastião Rodolfo Dalgado and Anthony X. Soares (1988). Portuguese Vocables in Asiatic Languages: From the Portuguese Original of Monsignor Sebastiao Rodolfo Dalgado. South Asia Books. p. 520. ISBN 978-81-206-0413-1.
  25. ↑ 鉄と生活研究会 (2008). トコトンやさしい鉄の本. 日刊工業新聞社. ISBN 978-4-526-06012-0.
  26. ↑ Secrets of the Samurai Sword. Pbs.org. Retrieved 2013-08-08.
  27. ↑ "Step 1: Types of Katana Swords". Katana Sword Reviews. Retrieved 25 April 2016.
  28. ↑ Richard Cohen (18 December 2007). By the Sword: A History of Gladiators, Musketeers, Samurai, Swashbucklers, and Olympic Champions. Random House Publishing Group. p. 124. ISBN 978-0-307-43074-8.
  29. ↑ James Drewe (15 February 2009). Tàijí Jiàn 32-Posture Sword Form. Singing Dragon. p. 10. ISBN 978-1-84642-869-2.
  30. ↑ Mason Smith (December 1997). "Stand and Deliver". Black Belt (Active Interest Media, Inc.) 35 (12): 66. ISSN 0277-3066.
  31. ↑ Graham Priest; Damon Young (21 August 2013). Martial Arts and Philosophy: Beating and Nothingness. Open Court. p. 209. ISBN 978-0-8126-9723-0.
  32. ↑ Thomas A. Green; Joseph R. Svinth (2010). Martial Arts of the World: An Encyclopedia of History and Innovation. ABC-CLIO. pp. 120–121. ISBN 978-1-59884-243-2.
  33. ↑ Gordon Warner and Donn F. Draeger (2005). Japanese Swordsmanship: Technique and Practice. Boston, Massachusetts: Weatherhill. pp. 110–131. ISBN 978-0834802360.
  34. ↑ "S.I. No. 338/2009 — Firearms and offensive Weapons Act 1990 (offensive Weapons) (Amendment) Order 2009". Irish Statute Book, Government of Ireland. 2009-08-28.
  35. ↑ The Criminal Justice Act 1988 (Offensive Weapons)(Amendment) Order 2008. Opsi.gov.uk (2010-11-19). Retrieved 2013-08-08.
  36. ↑ "Ban on imitation Samurai swords". BBC News. 2007-12-12. Retrieved 2011-12-29. Calls for a ban came after a number of high-profile incidents in which cheap Samurai-style swords had been used as a weapon. The Home Office estimates there have been some 80 attacks in recent years involving Samurai-style blades, leading to at least five deaths.
  37. ↑ EXPLANATORY MEMORANDUM TO THE CRIMINAL JUSTICE ACT 1988 (OFFENSIVE WEAPONS) (AMENDMENT No. 2): ORDER 2008. opsi.gov.uk. Retrieved 2013-08-08.

Further reading

External links

This article is issued from Wikipedia - version of the Tuesday, May 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.