Diesel Electric railmotor (VR)

Diesel Electric Rail Motor (DERM)

RM58 At Newport Workshops
Type and origin
Power type Diesel engine, Originally Petrol
Designer St Louis Car Company
Builder St Louis Car Company (First)
Victorian Railways
Build date 1928 - 1931
Total produced 10
Specifications
Gauge 5 ft 3 in (1,600 mm)
Length 58 ft (18 m)
Loco weight 43.07 long tons (43.76 t; 48.24 short tons)
Fuel type Originally Petrol, converted to Diesel fuel
Fuel capacity 750 litres (200 US gal)
Engine type 220 hp Winton six-cylinder petrol engine (Petrol)
2 x General Motors series 71 twin six-cylinder diesel engines (Diesel)
Generator General Electric DT 501E2
Traction motors 2 x General Electric GE 273A
Performance figures
Maximum speed 100 kilometres per hour (62 mph)
Power output 220 hp (Petrol), 255 bhp (Diesel)
Career
Operators Victorian Railways, VLine
Number in class 10
Numbers 55RM - 64RM
First run 1928
RM 63 as restored by DSCR in 2007
RM 55 as a PERM pre 1952

The Diesel Electric Rail Motor (DERM) was a railmotor operated by the Victorian Railways of Australia.

History

Originally built as a Petrol Electric Rail Motor (PERM), they were the longest-lived railmotor on the Victorian Railways, with the first entering service in 1928 and the last being withdrawn in 1991. The first railmotor was built by the St. Louis Car Company and shipped to Australia where the Victorian Railways built a further nine copies of it. It was powered by a 220 hp Winton petrol engine which was used until the 1950s when they were converted to twin Diesel Electric engines giving a total of 255 bhp.[1]

By the 1970s the longest regular scheduled journey run by a DERM was the Bendigo to Robinvale run, withdrawn on 3 June 1978. A DERM with a DERM Trailer car ran a regular passenger train on the South Gippsland Line from the 1960s - 1970s.[2] In the late '70s RM 55 and RM 61 were extensively modified with the cab being rebuilt, the engine being relocated and the engine room rebuilt with porthole windows, and new aluminium cabin windows fitted. As such they looked significantly different.

DERMs with the porthole windows were a familiar sight on the Mornington and Stony Point lines prior to the line closures in the early 1980s.

Trailers

As of 1983, 28MT had been scrapped and 27, 29 and 30MT were all withdrawn account poor condition, and the Brill trailer 200MT was stored unservicable at Newport workshops. 26MT was still in use along with the ex-W-type trailers 31MT, 32MT, 33MT and 34MT.

Details of vehicles

Motor units

Railmotor Entered service Upgraded to DERM Withdrawn Scrapped Current Status Notes
55RM
56RM
57RM
58RM
59RM
60RM
61RM
62RM
63RM
64RM

Trailers

Railmotor Entered service Withdrawn Scrapped Current Status Notes
26MT 1930-04-29
27MT 1930-04-29
28MT 1930-10-04 1982-06-09 Off Register, 1981-08-17 broken up[3]
29MT 1930-09-26
30MT 1930-09-26

Preservation

All but one of the DERMs have survived into preservation, with 57RM being the only DERM to have been scrapped. Two are operational, with the remaining seven in various conditions. Below is a brief outline of the status of the DERMs (as at February 2016):

Model Railways

HO Scale

Steam Era Models produces a plastic kit (including a motor) for the DERM.[4][5]

Trainbuilder has released sets of DERM+Trailers in ready-to-run brass.[6]

Eureka Models has announced an intent to release ready-to-run models sometime in the future.

See also

References

  1. "DERM Railmotors". VictorianRailways.net. Retrieved 4 June 2008.
  2. Banger, Chris (March 1997). "Rail Passenger Service Withdrawals Since 1960". Newsrail (Australian Railway Historical Society (Victorian Division)) 25 (3): 77–82.
  3. Newsrail Feb 1983 Pg25
  4. http://www.steameramodels.com/locos.htm
  5. http://www.railpage.com.au/f-p1117090.htm
  6. http://trainbuilder.com/derm

External links

This article is issued from Wikipedia - version of the Sunday, February 21, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.