Electric double-layer capacitor

Maxwell Technologies product series supercapacitors

Electric double-layer capacitors (EDLC) are electrochemical capacitors which energy storage predominant is achieved by Double-layer capacitance. In the past, all electrochemical capacitors were called "double-layer capacitors". However, since some years it is known that double-layer capacitors together with pseudocapacitors are part of a new family of electrochemical capacitors[1] called supercapacitors, also known as ultracapacitors. Supercapacitors do not have a conventional solid dielectric. See the entry on supercapacitors for an in depth treatment on the subject.

The capacitance value of a supercapacitor is determined by two storage principles:

Double-layer capacitance and pseudocapacitance both contribute inseparable to the total capacitance value of a supercapacitor.[3] However, the ratio of the two can vary greatly, depending on the design of the electrodes and the composition of the electrolyte. Pseudocapacitance can increase the capacitance value by as much as an order of magnitude over that of the double-layer by itself.[1]

Hierarchical classification of supercapacitors and related types

Supercapacitors are divided into three family members, based on the design of the electrodes:

However, because double-layer capacitance and pseudocapacitance both contribute inseparable to the total capacitance value of an electrochemical capacitor, a correct description of these capacitors only can be given under the generic term, see Supercapacitor.

Commercial double layer capacitors

More specifically, commercial EDLCs in which energy storage predominant is achieved by double-layer capacitance, energy is stored by forming an electrical double layer of electrolyte ions on the surface of conductive electrodes. Since EDLCs are not limited by the electrochemical charge transfer kinetics of batteries, it can charge and discharge at a lot higher rate with lifetimes of more than 1 million cycles. The EDLC energy density is determined by operating voltage and the specific capacitance (farad/gram or farad/cm^3) of the electrode/electrolyte system. The specific capacitance is related to the Specific Surface Area (SSA) accessible by the electrolyte, its interfacial double-layer capacitance, and the electrode material density.

Commercial EDLC's are based on two symmetric electrodes impregnated with electrolytes comprising tetraethylammonium tetrafluoroborate salts in organic solvents. Current EDLC with organic electrolytes operates at 2.7V, reach energy densities around 5-8 Wh/kg and 7 to 10Wh/liter. The specific capacitance is related to the Specific Surface Area (SSA) accessible by the electrolyte, its interfacial double-layer capacitance, and the electrode material density. Graphene-based platelets with mesoporous spacer material is a promising structure for increasing the SSA of the electrolyte. [4]

See also

References

  1. 1 2 B. E. Conway (1999) (in German), Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications, Berlin: Springer, pp. 1–8, ISBN 0306457369, //books.google.com/books?id=8yvzlr9TqI0C&pg=PA1 See also Brian E. Conway in Electrochemistry Encyclopedia: Electrochemical Capacitors — Their Nature, Function and Applications
  2. 1 2 Adam Marcus Namisnyk. "A Survey of Electrochemical Supercapacitor Technology" (PDF). Retrieved 2011-06-24.
  3. Elzbieta Frackowiak, Francois Beguin, PERGAMON, Carbon 39 (2001) 937–950, Carbon materials for the electrochemical storage of energy in Capacitors PDF
  4. Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A., . . . Pellegrini, V. (2015). Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage. Science, 1246501-1246501.

External links

This article is issued from Wikipedia - version of the Friday, March 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.