Hopper (spacecraft)

Hopper
Country ESA
Contract award EADS, German Aerospace Center
Status Canceled

Hopper was a proposed European Space Agency orbital and reusable launch vehicle. The shuttle prototype spaceplane was one of several proposals for a European reusable launch vehicle (RLV) planned to cheaply ferry satellites into orbit by 2015.[1] The 'Phoenix' was a German-European project for a one-seventh scale model of the Hopper concept vehicle.[2]

Concept

The suborbital Hopper was a FESTIP (Future European Space Transportation Investigations Programme) system study design[3] selected for further analysis during Future Launchers Preparatory Programme. It would be composed of a single stage reusable vehicle which would not reach orbital velocity. This vehicle was to be launched on a 4 km magnetic horizontal track which would accelerate it to launch speed. At a height of 130 km, the vehicle would fire an expendable rocket powered upper stage which would reach orbital speed and place its satellite payload into orbit. Finally, the vehicle would then glide down to an island in the Atlantic Ocean and be taken back to French Guiana by ship.[1] An EADS spokesperson stated that a reusable launch vehicle like Hopper could halve the cost of sending a satellite into orbit, which now stands at $15,000 USD per kilogram of payload.[1]

Contractors

EADS was responsible for the project management and for the entire software equipment of the system. Other partner companies were also involved in the development. The European Space Agency (ESA) and EADS hoped to complete development of Hopper between 2015 and 2020. After the first glide test on May 2004, no updates were forthcoming and eventually the project was canceled.

Prototype

The Phoenix RLV launcher, the prototype of Hopper launcher, was part of the German national program ASTRA, a €40 million project founded by the German Federal Government, EADS Astrium Space Transportation and the state Free Hanseatic City of Bremen with one third each. Both EADS and the State of Bremen invested at least €8.2 million and €4.3 million, respectively. Another contribution of €16 million came from partner companies such as the Bremen-based OHB-System, DLR and the Federal Ministry for Education and Research.

The Phoenix RLV prototype was 6.9 meters long (23 ft), had a weight of 1,200 kilograms (2,640 lb), and a wingspan of 3.9 meters (13 ft). The prototype, at one sixth the size of the planned vehicle, was last in the alpha stage of development at Bremen labs of EADS.

On Saturday 8 May 2004, the prototype was dropped from 2.4 kilometers (8,000 ft) by a helicopter and landed precisely and without incident after a GPS-guided 90 second glide.[4] The test was conducted at the North European Aerospace Test range in Kiruna, 1,240 km (770 mi) north of Stockholm, Sweden. The primary aim of the test was to assess the glider potential of the craft. No subsequent tests were reported.

The final version of the vehicle was expected to be able to support the reentry forces, generated heat, and be able to glide from an altitude of 129 kilometers (80 mi).

See also

References

  1. 1 2 3 Europe's space shuttle passes early test | 10 May 2004
  2. ↑ Launching the next generation of rockets - BBC News, 2004.
  3. ↑ Possible Future European Launchers, A Process of Convergence | ESA Bulletin Number 97 | March 1999
  4. ↑ Phoenix Flight Day | Swedish Space Corporation. | May 8, 2004

External links

This article is issued from Wikipedia - version of the Sunday, August 02, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.