Nut (hardware)

A nut threaded onto an Allen key socket head screw

A nut is a type of fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads' friction, a slight stretch of the bolt, and compression of the parts. In applications where vibration or rotation may work a nut loose, various locking mechanisms may be employed: Adhesives, safety pins or lockwire, nylon inserts, or slightly oval-shaped threads. The most common shape is hexagonal, for similar reasons as the bolt head - 6 sides give a good granularity of angles for a tool to approach from (good in tight spots), but more (and smaller) corners would be vulnerable to being rounded off. It takes only 1/6th of a rotation to obtain the next side of the hexagon and grip is optimal. However polygons with more than 6 sides do not give the requisite grip and polygons with less than 6 sides take more time to be given a complete rotation.Other specialized shapes exist for certain needs, such as wing nuts for finger adjustment and captive nuts for inaccessible areas.

Nuts are graded with strength ratings compatible with their respective bolts; for example, an ISO property class 10 nut will be able to support the bolt proof strength load of an ISO property class 10.9 bolt without stripping. Likewise, an SAE class 5 nut can support the proof load of an SAE class 5 bolt, and so on.

A wide variety of nuts exists, from household hardware versions to specialized industry-specific designs that are engineered to meet various technical standards.

Nuts come in many sizes. This one is part of the Sydney Harbour Bridge.

Types

Left to right: Wing, hex, hex flange, and slab weld nuts.
Left to right: Slotted, square, T, cap (or acorn), nylon locking, and castellated nuts.
Hexagon nuts.
Name Image Description
Acorn nut (cap nut)
Barrel nut
Cage nut
Clip-on nut (J-nut or U-nut)
Coupling nut
Cross dowel
Flange nut (collar nut)
Insert nut
Sex bolt
Split nut
Sleeve nut
Square nut
Staked/welded nut (for plastic)
Swage nut
T-nut
T-slot nut /T-groove nut
Weld nut
Well nut
Wing nut

Locknuts

Main article: Locknut

Standard metric hex nuts sizes

Nut quotation

Note that flat (wrench) sizes differ from industry standards. For example, wrench sizes of fastener used in Japanese built cars comply with JIS automotive standard.

Nominal hole
diameter, D (mm)		 Pitch,
P (mm)		 Across flats,
A/F (mm)		 External diameter;
across corners,
A/C (mm)		 Height, H (mm)
1st
choice		 2nd
choice		 Coarse Fine ISO DIN JIS Hex nut Jam nut Nylon nut
1 0.25 2.5
1.2 0.25
1.40.3
1.6 0.35 3.2
1.80.35
2 0.4 4 1.61.2-
2.5 0.45 5 2 1.6-
3 0.5 5.5 6.4 2.41.84
3.50.6 6
4 0.7 7 7 7 8.1 3.22.25
5 0.8 8 8 8 9.2 4 2.75
6 1 0.75 10 10 10 11.55 3.26
7 1 11 5.53.5-
8 1.251 13 13 12 15 6.54 8
10 1.5 1.25 or 1 16 17 14 19.68 5 10
12 1.751.5 or 1.2518 19 17 22.110 6 12
14 2 1.5 21 22 19 11 7 14
16 2 1.5 24 24 22 27.713 8 16
18 2.5 2 or 1.5 27 15 9 18.5
20 2.5 2 or 1.5 30 30 34.616 10 20
22 2.5 2 or 1.5 32
24 3 2 36 41.619
27 3 2 41
30 3.5 2 46 53.124
33 3.5 2
36 4 3 55 63.529
39 4 3
42 4.5 3
45 4.5 3
48 5 3
52 5 4
56 5.5 4
60 5.5 4
64 6 4

Standard SAE hex nuts sizes

UTS
size		 Nominal hole
diameter, D		 Pitch, P Across flats,
A/F		 Across corners,
A/C		 Height, H
Coarse (UNC) Fine (UNF) Extra fine (UNEF) Hex nut Jam nut Nylon nut
(in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm)
#0 5⁄32 0.1563 3.969
#1 5⁄32 0.1563 3.969
#2 0.086 2.1844 3⁄16 0.1875 4.763 5.18 1.65
#3 3⁄16 0.1875 4.763 5.10 1.85
#4 0.1120 2.8448 1⁄4 0.2500 6.35 7.05 2.25
#6 0.1380 3.5052 5⁄16 0.3125 7.938 8.95 2.85
#8 0.1640 4.1656 11⁄32 0.3440 8.731 0.386 9.80 3.05
#10 0.1900 4.8260 3⁄8 0.3750 9.525 0.461 11.70 3.10
#12 0.2160 5.4864 7⁄16 0.4375 11.113
1⁄4 1⁄4 0.250 6.350 7⁄16 0.4375 11.113
5⁄16 5⁄16 0.3125 7.9375 1⁄2 0.5000 12.700 0.577
3⁄8 3⁄8 0.375 9.525 9⁄16 0.5620 14.288 0.650
7⁄16 7⁄16 11⁄16 0.6750 17.463
1⁄2 1⁄2 0.500 12.70 3⁄4 0.7500 19.050 0.866
9⁄16 9⁄16 7⁄8 0.8750 22.225
5⁄8 5⁄8 15⁄16 0.9375 23.813 1.083
3⁄4 3⁄4 0.750 1 1⁄8 1.1250 28.575 1.299
7⁄8 7⁄8 1 5⁄16 1.3125 33.338
1 1 1 25.40 1 1⁄2 1.5000 38.100 1.653

Classifications

Mechanical specifications of Metric/English sized nuts[1]
Material Proof strength Min. tensile yield strength Min. tensile ultimate strength Nut marking Nut class
ISO 898 (Metric)
Low or medium carbon steel 380 MPa (55 ksi) 420 MPa (61 ksi) 520 MPa (75 ksi) 5
Medium carbon steel Q&T 580 MPa (84 ksi) 640 MPa (93 ksi) 800 MPa (116 ksi) 8
Alloy steel Q&T 830 MPa (120 ksi) 940 MPa (136 ksi) 1040 MPa (151 ksi) 10
SAE J995 (English)
Low or medium carbon steel 55 ksi (379 MPa) 57 ksi (393 MPa) 74 ksi (510 MPa) 2
Medium carbon steel Q&T 85 ksi (586 MPa) 92 ksi (634 MPa) 120 ksi (827 MPa) 5
Alloy steel Q&T 120 ksi (827 MPa) 130 ksi (896 MPa) 150 ksi (1034 MPa) 8

Manufacture

Use of two nuts to prevent self-loosening

In normal use, a nut-and-bolt joint holds together because the bolt is under a constant tensile stress called the preload. The preload pulls the nut threads against the bolt threads, and the nut face against the bearing surface, with a constant force, so that the nut cannot rotate without overcoming the friction between these surfaces. If the joint is subjected to vibration, however, the preload increases and decreases with each cycle of movement. If the minimum preload during the vibration cycle is not enough to hold the nut firmly in contact with the bolt and the bearing surface, then the nut is likely to become loose.

Specialized locking nuts exist to prevent this problem, but sometimes it is sufficient to add a second nut. For this technique to be reliable, each nut must be tightened to the correct torque. The inner nut is tightened to about a quarter to a half of the torque of the outer nut. It is then held in place by a wrench while the outer nut is tightened on top using the full torque. This arrangement causes the two nuts to push on each other, creating a tensile stress in the short section of the bolt that lies between them. Even when the main joint is vibrated, the stress between the two nuts remains constant, thus holding the nut threads in constant contact with the bolt threads and preventing self-loosening. When the joint is assembled correctly, the outer nut bears the full tension of the joint. The inner nut functions merely to add a small additional force to the outer nut and does not need to be as strong, so a thin nut (also called a jam nut) can be used.[2]

See also

References

  1. ↑ Bickford & Nassar 1998, p. 153.
  2. ↑ The Use of Two Nuts to Prevent Self Loosening, Bolt Science Limited, accessed 2011-07-17

Bibliography


Wikimedia Commons has media related to Nuts (hardware).
This article is issued from Wikipedia - version of the Friday, March 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.