Hexagon

For other uses, see Hexagon (disambiguation).
Regular hexagon

A regular hexagon
Type Regular polygon
Edges and vertices 6
Schläfli symbol {6}, t{3}
Coxeter diagram
Symmetry group Dihedral (D6), order 2×6
Internal angle (degrees) 120°
Dual polygon self
Properties convex, cyclic, equilateral, isogonal, isotoxal

In geometry, a hexagon (from Greek ἕξ hex, "six" and γωνία, gonía, "corner, angle") is a 6-sided polygon or 6-gon. The total of the internal angles of any hexagon is 720°.

Regular hexagon

A regular hexagon has Schläfli symbol {6}[1] and can also be constructed as a truncated equilateral triangle, t{3}, which alternates two types of edges.

A regular hexagon is defined as a hexagon that is both equilateral and equiangular. It is bicentric, meaning that it is both cyclic (has a circumscribed circle) and tangential (has an inscribed circle).

The common length of the sides equals the radius of the circumscribed circle, which equals \tfrac{2\sqrt{3}}{3} times the apothem (radius of the inscribed circle). All internal angles are 120 degrees. A regular hexagon has 6 rotational symmetries (rotational symmetry of order six) and 6 reflection symmetries (six lines of symmetry), making up the dihedral group D6. The longest diagonals of a regular hexagon, connecting diametrically opposite vertices, are twice the length of one side. From this it can be seen that a triangle with a vertex at the center of the regular hexagon and sharing one side with the hexagon is equilateral, and that the regular hexagon can be partitioned into six equilateral triangles.

Like squares and equilateral triangles, regular hexagons fit together without any gaps to tile the plane (three hexagons meeting at every vertex), and so are useful for constructing tessellations. The cells of a beehive honeycomb are hexagonal for this reason and because the shape makes efficient use of space and building materials. The Voronoi diagram of a regular triangular lattice is the honeycomb tessellation of hexagons. It is not usually considered a triambus, although it is equilateral.

Parameters

The area of a regular hexagon of side length t is given by

A = \frac{3 \sqrt{3}}{2}t^2 \simeq 2.598 t^2.

An alternative formula for the area is

A=\frac{3}{2}d \cdot t

where the length d is the distance between the parallel sides (also referred to as the flat-to-flat distance), or the height of the hexagon when it sits on one side as base, or the diameter of the inscribed circle.

Another alternative formula for the area if only the flat-to-flat distance, d, is known, is given by

A = \frac{ \sqrt{3}}{2} d^2 \simeq 0.866d^2.

The area can also be found by the formulas

A=ap/2

and

 A\ =\ {2}a^2\sqrt{3}\ \simeq\ 3.464 a^2,

where a is the apothem and p is the perimeter.

The regular hexagon fills the fraction \tfrac{3\sqrt{3}}{2\pi}\approx 0.8270 of its circumscribed circle.

The perimeter of a regular hexagon of side length t is 6t, its maximal diameter 2t, and its minimal diameter \scriptstyle d\ =\ t\sqrt{3}.

If a regular hexagon has successive vertices A, B, C, D, E, F and if P is any point on the circumscribing circle between B and C, then PE + PF = PA + PB + PC + PD.

Symmetry

The six lines of reflection of a regular hexagon, with Dih6 or r12 symmetry, order 12.
The dihedral symmetries are divided depending on whether they pass through vertices (d for diagonal) or edges (p for perpendiculars) Cyclic symmetries in the middle column are labeled as g for their central gyration orders. Full symmetry of the regular form is r12 and no symmetry is labeled a1.

The regular hexagon has Dih6 symmetry, order 12. There are 3 dihedral subgroups: Dih3, Dih2, and Dih1, and 4 cyclic subgroups: Z6, Z3, Z2, and Z1.

These symmetries express 9 distinct symmetries of a regular hexagon. John Conway labels these by a letter and group order.[2] r12 is full symmetry, and a1 is no symmetry. d6, a isogonal hexagon constructed by four mirrors can alternate long and short edges, and p6, an isotoxal hexagon constructed with equal edge lengths, but vertices alternating two different internal angles. These two forms are duals of each other and have half the symmetry order of the regular hexagon. The i4 forms are regular hexagons flattened or stretched along one symmetry direction. It can be seen as an elongated rhombus, while d2 and p2 can be seen as horizontally and vertically elongated kites. g2 hexagons, with opposite sides parallel are also called hexagonal parallelogons.

Each subgroup symmetry allows one or more degrees of freedom for irregular forms. Only the g6 subgroup has no degrees of freedom but can seen as directed edges.

Hexagons of symmetry g2, i4, and r12, as parallelogons can tessellate the Euclidean plane by translation. Other hexagon shapes can tile the plane with different orientations.

p6m (*632) cmm (2*22) p2 (2222) p31m (3*3) pmg (22*) pg (××)

r12

i4

g2

d2

d2

p2

a1

Related polygons and tilings

A regular hexagon has Schläfli symbol {6}. A regular hexagon is a part the regular hexagonal tiling, {6,3}, with 3 hexagonal around each vertex.

A regular hexagon can also be created as a truncated equilateral triangle, with Schläfli symbol t{3}. Seen with two types (colors) of edges, this form only has D3 symmetry.

A truncated hexagon, t{6}, is an dodecagon, {12}, alternating 2 types (colors) of edges. An alternated hexagon, h{6}, is a equilateral triangle, {3}. A regular hexagon can be stellated with equilateral triangles on its edges, creating a hexagram. A regular hexagon can be dissected into 6 equilateral triangles by adding a center point. This pattern repeats within the regular triangular tiling.

A regular hexagon can be extended into a regular dodecagon by adding alternating squares and equilateral triangles around it. This pattern repeats within the rhombitrihexagonal tiling.

Regular
{6}
Truncated
t{3} = {6}
Hypertruncated triangles Stellated
Star figure 2{3}
Truncated
t{6} = {12}
Alternated
h{6} = {3}
A concave hexagon A self-intersecting hexagon (star polygon) Dissected {6} Extended
Central {6} in {12}
A skew hexagon, within cube

Hexagonal structures

Giants causeway closeup

From bees' honeycombs to the Giant's Causeway, hexagonal patterns are prevalent in nature due to their efficiency. In a hexagonal grid each line is as short as it can possibly be if a large area is to be filled with the fewest number of hexagons. This means that honeycombs require less wax to construct and gain lots of strength under compression.

Irregular hexagons with parallel opposite edges are called parallelogons and can also tile the plane by translation. In three dimensions, hexagonal prisms with parallel opposite faces are called parallelohedrons and these can tessellate 3-space by translation.

Hexagonal prism tessellations
Form Hexagonal tiling Hexagonal prismatic honeycomb
Regular
Parallelogonal

Tesselations by hexagons

Main article: Hexagonal tiling

In addition to the regular hexagon, which determines a unique tessellation of the plane, any irregular hexagon which satisfies the Conway criterion will tile the plane.

Hexagon inscribed in a conic section

Pascal's theorem (also known as the "Hexagrammum Mysticum Theorem") states that if an arbitrary hexagon is inscribed in any conic section, and pairs of opposite sides are extended until they meet, the three intersection points will lie on a straight line, the "Pascal line" of that configuration.

Cyclic hexagon

The Lemoine hexagon is a cyclic hexagon (one inscribed in a circle) with vertices given by the six intersections of the edges of a triangle and the three lines that are parallel to the edges that pass through its symmedian point.

If the successive sides of a cyclic hexagon are a, b, c, d, e, f, then the three main diagonals intersect in a single point if and only if ace = bdf.[3]

If, for each side of a cyclic hexagon, the adjacent sides are extended to their intersection, forming a triangle exterior to the given side, then the segments connecting the circumcenters of opposite triangles are concurrent.[4]

If a hexagon has vertices on the circumcircle of an acute triangle at the six points (including three triangle vertices) where the extended altitudes of the triangle meet the circumcircle, then the area of the hexagon is twice the area of the triangle.[5]:p. 179

Hexagon tangential to a conic section

Let ABCDEF be a hexagon formed by six tangent lines of a conic section. Then Brianchon's theorem states that the three main diagonals AD, BE, and CF intersect at a single point.

In a hexagon that is tangential to a circle and that has consecutive sides a, b, c, d, e, and f,[6]

a+c+e=b+d+f.

Equilateral triangles on the sides of an arbitrary hexagon

Equilateral triangles on the sides of an arbitrary hexagon

If an equilateral triangle is constructed externally on each side of any hexagon, then the midpoints of the segments connecting the centroids of opposite triangles form another equilateral triangle.[7]:Thm. 1

Skew hexagon

A regular skew hexagon seen as edges of a triangular antiprism, symmetry D3d, [2+,6], (2*3), order 12.

A skew hexagon is a skew polygon with 6 vertices and edges but not existing on the same plane. The interior of such an hexagon is not generally defined. A skew zig-zag hexagon has vertices alternating between two parallel planes.

A regular skew hexagon is vertex-transitive with equal edge lengths. In 3-dimensions it will be a zig-zag skew hexagon and can be seen in the vertices and side edges of a triangular antiprism with the same D3d, [2+,6] symmetry, order 12.

The cube and octahedron (same as triangular antiprism) have regular skew hexagons as petrie polygons.

Skew hexagons on 3-fold axes

Cube

Octahedron

Petrie polygons

The regular skew hexagon is the Petrie polygon for these higher dimensional regular, uniform and dual polyhedra and polytopes, shown in these skew orthogonal projections:

4D 5D

3-3 duoprism

3-3 duopyramid

5-simplex

Convex equilateral hexagon

A principal diagonal of a hexagon is a diagonal which divides the hexagon into quadrilaterals. In any convex equilateral hexagon (one with all sides equal) with common side a, there exists[8]:p.184,#286.3 a principal diagonal d1 such that

\frac{d_1}{a} \leq 2

and a principal diagonal d2 such that

\frac{d_2}{a} > \sqrt{3}.

Polyhedra with hexagons

There is no Platonic solid made of only regular hexagons, because the hexagons tessellate, not allowing the result to "fold up". The Archimedean solids with some hexagonal faces are the truncated tetrahedron, truncated octahedron, truncated icosahedron (of soccer ball and fullerene fame), truncated cuboctahedron and the truncated icosidodecahedron. These hexagons can be considered truncated triangles, with Coxeter diagrams of the form and .

There are other symmetry polyhedra with stretched or flattened hexagons, like these Goldberg polyhedron G(2,0):

There are also 9 Johnson solids with regular hexagons:

Hexagons: natural and human-made

See also

References

  1. Wenninger, Magnus J. (1974), Polyhedron Models, Cambridge University Press, p. 9, ISBN 9780521098595.
  2. John H. Conway, Heidi Burgiel, Chaim Goodman-Strauss, (2008) The Symmetries of Things, ISBN 978-1-56881-220-5 (Chapter 20, Generalized Schaefli symbols, Types of symmetry of a polygon pp. 275-278)
  3. Cartensen, Jens, "About hexagons", Mathematical Spectrum 33(2) (2000–2001), 37–40.
  4. Nikolaos Dergiades, "Dao's theorem on six circumcenters associated with a cyclic hexagon", Forum Geometricorum 14, 2014, 243--246. http://forumgeom.fau.edu/FG2014volume14/FG201424index.html
  5. Johnson, Roger A., Advanced Euclidean Geometry, Dover Publications, 2007 (orig. 1960).
  6. Gutierrez, Antonio, "Hexagon, Inscribed Circle, Tangent, Semiperimeter", , Accessed 2012-04-17.
  7. Dao Thanh Oai (2015), "Equilateral triangles and Kiepert perspectors in complex numbers", Forum Geometricorum 15, 105--114. http://forumgeom.fau.edu/FG2015volume15/FG201509index.html
  8. Inequalities proposed in “Crux Mathematicorum, .

External links

Look up hexagon in Wiktionary, the free dictionary.
This article is issued from Wikipedia - version of the Friday, April 29, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.