120-cell

120-cell

Schlegel diagram
(vertices and edges)
Type Convex regular 4-polytope
Schläfli symbol {5,3,3}
Coxeter diagram
Cells 120 {5,3}
Faces 720 {5}
Edges 1200
Vertices 600
Vertex figure
tetrahedron
Petrie polygon 30-gon
Coxeter group H4, [3,3,5]
Dual 600-cell
Properties convex, isogonal, isotoxal, isohedral
Uniform index 32

In geometry, the 120-cell is the convex regular 4-polytope with Schläfli symbol {5,3,3}. It is also called a C120, hecatonicosachoron, dodecacontachoron and hecatonicosahedroid.[1]

The boundary of the 120-cell is composed of 120 dodecahedral cells with 4 meeting at each vertex.

It can be thought of as the 4-dimensional analog of the dodecahedron and has been called a dodecaplex (short for "dodecahedral complex"), hyperdodecahedron, polydodecahedron. Just as a dodecahedron can be built up as a model with 12 pentagons, 3 around each vertex, the dodecaplex can be built up from 120 dodecahedra, with 3 around each edge.

The Davis 120-cell, introduced by Davis (1985), is a compact 4-dimensional hyperbolic manifold obtained by identifying opposite faces of the 120-cell, whose universal cover gives the regular honeycomb {5,3,3,5} of 4-dimensional hyperbolic space.

Elements

Cartesian coordinates

The 600 vertices of the 120-cell include all permutations of:[3]

(0, 0, ±2, ±2)
(±1, ±1, ±1, ±√5)
(±ϕ−2, ±ϕ, ±ϕ, ±ϕ)
(±ϕ−1, ±ϕ−1, ±ϕ−1, ±ϕ2)

and all even permutations of

(0, ±ϕ−2, ±1, ±ϕ2)
(0, ±ϕ−1, ±ϕ, ±√5)
(±ϕ−1, ±1, ±ϕ, ±2)

where ϕ (also called τ) is the golden ratio, (1+√5)/2.

Visualization

The 120-cell consists of 120 dodecahedral cells. For visualization purposes, it is convenient that the dodecahedron has opposing parallel faces (a trait it shares with the cells of the tesseract and the 24-cell). One can stack dodecahedrons face to face in a straight line bent in the 4th direction into a great circle with a circumference of 10 cells. Starting from this initial ten cell construct there are two common visualizations one can use: a layered stereographic projection, and a structure of intertwining rings.

Layered stereographic projection

The cell locations lend themselves to a hyperspherical description. Pick an arbitrary cell and label it the "North Pole". Twelve great circle meridians (four cells long) radiate out in 3 dimensions, converging at the 5th "South Pole" cell. This skeleton accounts for 50 of the 120 cells (2 + 4*12).

Starting at the North Pole, we can build up the 120-cell in 9 latitudinal layers, with allusions to terrestrial 2-sphere topography in the table below. With the exception of the poles, each layer represents a separate 2-sphere, with the equator being a great 2-sphere. The centroids of the 30 equatorial cells form the vertices of an icosidodecahedron, with the meridians (as described above) passing through the center of each pentagonal face. The cells labeled "interstitial" in the following table do not fall on meridian great circles.

Layer # Number of Cells Description Colatitude Region
1 1 cell North Pole Northern Hemisphere
2 12 cells First layer of meridian cells / "Arctic Circle" 36°
3 20 cells Non-meridian / interstitial 60°
4 12 cells Second layer of meridian cells / "Tropic of Cancer" 72°
5 30 cells Non-meridian / interstitial 90° Equator
6 12 cells Third layer of meridian cells / "Tropic of Capricorn" 108° Southern Hemisphere
7 20 cells Non-meridian / interstitial 120°
8 12 cells Fourth layer of meridian cells / "Antarctic Circle" 144°
9 1 cell South Pole 180°
Total 120 cells

Layers' 2, 4, 6 and 8 cells are located over the pole cell's faces. Layers 3 and 7's cells are located directly over the pole cell's vertices. Layer 5's cells are located over the pole cell's edges.

Intertwining rings

Two intertwining rings of the 120-cell.
Two orthogonal rings in a cell-centered projection

The 120-cell can be partitioned into 12 disjoint 10-cell great circle rings, forming a discrete/quantized Hopf fibration. Starting with one 10-cell ring, one can place another ring alongside it that spirals around the original ring one complete revolution in ten cells. Five such 10-cell rings can be placed adjacent to the original 10-cell ring. Although the outer rings "spiral" around the inner ring (and each other), they actually have no helical torsion. They are all equivalent. The spiraling is a result of the 3-sphere curvature. The inner ring and the five outer rings now form a six ring, 60-cell solid torus. One can continue adding 10-cell rings adjacent to the previous ones, but it's more instructive to construct a second torus, disjoint from the one above, from the remaining 60 cells, that interlocks with the first. The 120-cell, like the 3-sphere, is the union of these two (Clifford) tori. If the center ring of the first torus is a meridian great circle as defined above, the center ring of the second torus is the equatorial great circle that is centered on the meridian circle. Also note that the spiraling shell of 50 cells around a center ring can be either left handed or right handed. It's just a matter of partitioning the cells in the shell differently, i.e. picking another set of disjoint great circles.

Other great circle constructs

There is another great circle path of interest that alternately passes through opposing cell vertices, then along an edge. This path consists of 6 cells and 6 edges. Both the above great circle paths have dual great circle paths in the 600-cell. The 10 cell face to face path above maps to a 10 vertices path solely traversing along edges in the 600-cell, forming a decagon. The alternating cell/edge path above maps to a path consisting of 12 tetrahedrons alternately meeting face to face then vertex to vertex (six triangular bipyramids) in the 600-cell. This latter path corresponds to a ring of six icosahedra meeting face to face in the snub 24-cell (or icosahedral pyramids in the 600-cell).

Projections

Orthogonal projections

Orthogonal projections of the 120-cell can be done in 2D by defining two orthonormal basis vectors for a specific view direction.

Orthographic projections by Coxeter planes
H4 - F4

[30]

[20]

[12]
H3 A2 / B3 / D4 A3 / B2

[10]

[6]

[4]

3-dimensional orthogonal projections can also be made with three orthonormal basis vectors, and displayed as a 3d model, and then projecting a certain perspective in 3D for a 2d image.

3D orthographic projections

3D isometric projection

Animated 4D rotation

Perspective projections

These projections use perspective projection, from a specific view point in four dimensions, and projecting the model as a 3D shadow. Therefore faces and cells that look larger are merely closer to the 4D viewpoint. Schlegel diagrams use perspective to show four-dimensional figures, choosing a point above a specific cell, thus making the cell as the envelope of the 3D model, and other cells are smaller seen inside it. Stereographic projection use the same approach, but are shown with curved edges, representing the polytope a tiling of a 3-sphere.

A comparison of perspective projections from 3D to 2D is shown in analogy.

Comparison with regular dodecahedron
Projection Dodecahedron Dodecaplex
Schlegel diagram
12 pentagon faces in the plane

120 dodecahedral cells in 3-space
Stereographic projection
With transparent faces
Perspective projection
Cell-first perspective projection at 5 times the distance from the center to a vertex, with these enhancements applied:
  • Nearest dodecahedron to the 4D viewpoint rendered in yellow
  • The 12 dodecahedra immediately adjoining it rendered in cyan;
  • The remaining dodecahedra rendered in green;
  • Cells facing away from the 4D viewpoint (those lying on the "far side" of the 120-cell) culled to minimize clutter in the final image.
Vertex-first perspective projection at 5 times the distance from center to a vertex, with these enhancements:
  • Four cells surrounding nearest vertex shown in 4 colors
  • Nearest vertex shown in white (center of image where 4 cells meet)
  • Remaining cells shown in transparent green
  • Cells facing away from 4D viewpoint culled for clarity
A 3D projection of a 120-cell performing a simple rotation.
A 3D projection of a 120-cell performing a simple rotation (from the inside).
Animated 4D rotation

Related polyhedra and honeycombs

The 120-cell is one of 15 regular and uniform polytopes with the same symmetry [3,3,5]:

It is similar to three regular 4-polytopes: the 5-cell {3,3,3}, tesseract {4,3,3}, of Euclidean 4-space, and hexagonal tiling honeycomb of hyperbolic space. All of these have a tetrahedral vertex figure.

This honeycomb is a part of a sequence of 4-polytopes and honeycombs with dodecahedral cells:

See also

Notes

  1. Matila Ghyka, The Geometry of Art and Life (1977), p.68
  2. Coxeter, Regular polygons, p.293
  3. Weisstein, Eric W., "120-cell", MathWorld.

References

External links

This article is issued from Wikipedia - version of the Thursday, March 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.