Universal Character Set characters

"Unicode characters" redirects here. For a complete list of UCS characters, see List of Unicode characters.

The Unicode Consortium (UC) and the International Organisation for Standardisation (ISO) collaborate on the Universal Character Set (UCS). The UCS is an international standard to map characters used in natural language, mathematics, music, and other domains to machine readable values. By creating this mapping, the UCS enables computer software vendors to interoperate and transmit UCS encoded text strings from one to another. Because it is a universal map, it can be used to represent multiple languages at the same time. This avoids the confusion of using multiple legacy character encodings, which can result in the same sequence of codes having multiple meanings and thus be improperly decoded if the wrong one is chosen.

UCS has a potential capacity to encode over 1 million characters. Each UCS character is abstractly represented by a code point, which is an integer between 0 and 1,114,111, used to represent each character within the internal logic of text processing software (1,114,112 = 220 + 216 or 17 × 216, or hexadecimal 110000 code points). As of Unicode 8.0, released in June 2015, 264,256 (24%) of these code points are allocated, including 120,737 (11%) assigned characters, 137,468 (12%) reserved for private use, 2,048 for surrogates, and 66 designated non-characters, leaving 849,856 (76%) unassigned. The number of encoded characters is made up as follows:

ISO maintains the basic mapping of characters from character name to code point. Often the terms "character" and "code point" will get used interchangeably. However, when a distinction is made, a code point refers to the integer of the character: what one might think of as its address. While a character in UCS 10646 includes the combination of the code point and its name, Unicode adds many other useful properties to the character set, such as block, category, script, and directionality.

In addition to the UCS, Unicode also provides other implementation details such as:

  1. transcending mappings between UCS and other character sets
  2. different collations of characters and character strings for different languages
  3. an algorithm for laying out bidirectional text, where text on the same line may shift between left-to-right and right-to-left
  4. a case folding algorithm

Computer software end users enter these characters into programs through various input methods. Input methods can be through keyboard or a graphical character palette.

The UCS can be divided in various ways, such as by plane, block, character category, or character property.[1]

Planes

Main article: Plane (Unicode)

Unicode and ISO divide the set of code points into 17 planes, each capable of containing 65,534 distinct characters or 1,114,078 total. As of 2015 (Unicode 8.0) ISO and the Unicode Consortium has only allocated characters and blocks in six of the 17 planes. The others remain empty and reserved for future use.

Most characters are currently assigned to the first plane: the Basic Multilingual Plane. This is to help ease the transition for legacy software since the Basic Multilingual Plane is addressable with just two octets. The characters outside the first plane usually have very specialized or rare use.

  1. Basic Multilingual Plane (BMP). This plane contains most of the characters needed for scripts and languages in routine use in the world today. The plane is nearly filled with only 144 of the 65,534 code points remaining to be allocated.
  2. Supplementary Multilingual Plane (SMP). Currently used for many ancient scripts and characters as well as musical and mathematical notation.
  3. Supplementary Ideographic plane (SIP). Used for ideographic characters used in many languages in China, Japan, Korea, Taiwan, Vietnam and Singapore.
  4. Supplementary Special-purpose Plane (SSP). For special-purpose characters such as compatibility control characters.
  5. Private Use Plane A. Together the Private Use planes provide 131,068 characters — in addition to the 6,400 private use code points provided in the BMP — for definition by organizations outside Unicode and ISO 10646. Such private use definers might be operating system vendors, font vendors, or other independent standards organizations.
  6. Private Use Plane B.

Each plane corresponds with the value of the one or two hexadecimal digits (0–9, A–F) preceding the four final ones: hence U+24321 is in Plane 2, U+4321 is in Plane 0 (implicitly read U+04321), and U+10A200 would be in Plane 16 (hex 10 = decimal 16). Within one plane, the range of code points is hexadecimal 0000–FFFF, yielding a maximum of 65,536 code points. Some planes restrict code points to a subset of that range.

Unicode planes and used code point ranges
Basic Supplementary
Plane 0 Plane 1 Plane 2 Planes 3–13 Plane 14 Planes 15–16
0000–​FFFF 10000–​1FFFF 20000–​2FFFF 30000–​DFFFF E0000–​EFFFF F0000–​10FFFF
Basic Multilingual Plane Supplementary Multilingual Plane Supplementary Ideographic Plane unassigned Supplement­ary Special-purpose Plane Supplement­ary Private Use Area
BMP SMP SIP — SSP S PUA A/B

0000–​0FFF
1000–​1FFF
2000–​2FFF
3000–​3FFF
4000–​4FFF
5000–​5FFF
6000–​6FFF
7000–​7FFF

8000–​8FFF
9000–​9FFF
A000–​AFFF
B000–​BFFF
C000–​CFFF
D000–​DFFF
E000–​EFFF
F000–​FFFF

10000–​10FFF
11000–​11FFF
12000–​12FFF
13000–​13FFF
14000–​14FFF

16000–​16FFF




1B000–​1BFFF

1D000–​1DFFF
1E000–​1EFFF
1F000–​1FFFF

20000–​20FFF
21000–​21FFF
22000–​22FFF
23000–​23FFF
24000–​24FFF
25000–​25FFF
26000–​26FFF
27000–​27FFF

28000–​28FFF
29000–​29FFF
2A000–​2AFFF
2B000–​2BFFF
2C000–​2CFFF


2F000–​2FFFF

E0000–​E0FFF

15: PUA-A
F0000–​FFFFF

16: PUA-B
100000–​10FFFF

Blocks

Main article: Unicode block

Unicode adds a block property to UCS that further divides each plane into separate blocks. Each block is a grouping of characters by their use such as "mathematical operators" or "Hebrew script characters". When assigning characters to previously unassigned code points, the Consortium typically allocates entire blocks of similar characters: for example all the characters belonging to the same script or all similarly purposed symbols get assigned to a single block. Blocks may also maintain unassigned or reserved code points when the Consortium expects a block to require additional assignments.

The first 256 code points in the UCS correspond with those of ISO 8859-1, the most popular 8-bit character encoding in the Western world. As a result, the first 128 characters are also identical to ASCII. Though Unicode refers to these as a Latin script block, these two blocks contain many characters that are commonly useful outside of the Latin script. In general, not all characters in a given block need be of the same script, and a given script can occur in several different blocks.

Categories

Unicode assigns to every UCS character a general category and subcategory. The general categories are: letter, mark, number, punctuation, symbol, or control (in other words a formatting or non-graphical character).

Types include:

Special-purpose characters

Unicode codifies over a hundred thousand characters. Most of those represent graphemes for processing as linear text. Some, however, either do not represent graphemes, or, as graphemes, require exceptional treatment.[3][4] Unlike the ASCII control characters and other characters included for legacy round-trip capabilities, these other special-purpose characters endow plain text with important semantics.

Some special characters can alter the layout of text, such as the zero-width joiner and zero-width non-joiner, while others do not affect text layout at all, but instead affect the way text strings are collated, matched or otherwise processed. Other special-purpose characters, such as the mathematical invisibles, generally have no effect on text rendering, though sophisticated text layout software may choose to subtly adjust spacing around them.

Unicode does not specify the division of labor between font and text layout software (or "engine") when rendering Unicode text. Because the more complex font formats, such as OpenType or Apple Advanced Typography, provide for contextual substitution and positioning of glyphs, a simple text layout engine might rely entirely on the font for all decisions of glyph choice and placement. In the same situation a more complex engine may combine information from the font with its own rules to achieve its own idea of best rendering. To implement all recommendations of the Unicode specification, a text engine must be prepared to work with fonts of any level of sophistication, since contextual substitution and positioning rules do not exist in some font formats and are optional in the rest. The fraction slash is an example: complex fonts may or may not supply positioning rules in the presence of the fraction slash character to create a fraction, while fonts in simple formats cannot.

Byte order mark

When appearing at the head of a text file or stream, the byte order mark (BOM) U+FEFF hints at the encoding form and its byte order.

If the stream’s first byte is 0xFE and the second 0xFF, then the stream’s text is not likely to be encoded in UTF-8, since those bytes are invalid in UTF-8. It is also not likely to be UTF-16 in little-endian byte order because 0xFE, 0xFF read as a 16-bit little endian word would be U+FFFE, which is meaningless. The sequence also has no meaning in any arrangement of UTF-32 encoding, so, in summary, it serves as a fairly reliable indication that the text stream is encoded as UTF-16 in big-endian byte order. Conversely, if the first two bytes are 0xFF, 0xFE, then the text stream may be assumed to be encoded as UTF-16LE because, read as a 16-bit little-endian value, the bytes yield the expected 0xFEFF byte order mark. This assumption becomes questionable, however, if the next two bytes are both 0x00; either the text begins with a null character (U+0000), or the correct encoding is actually UTF-32LE, in which the full 4-byte sequence FF FE 00 00 is one character, the BOM.

The UTF-8 sequence corresponding to U+FEFF is 0xEF, 0xBB, 0xBF. This sequence has no meaning in other Unicode encoding forms, so it may serve to indicate that that stream is encoded as UTF-8.

The Unicode specification does not require the use of byte order marks in text streams. It further states that they should not be used in situations where some other method of signaling the encoding form is already in use.

Mathematical invisibles

Primarily for mathematics, the Invisible Separator (U+2063) provides a separator between characters where punctuation or space may be omitted such as in a two-dimensional index like i⁣j. Invisible Times (U+2062) and Function Application (U+2061) are useful in mathematics text where the multiplication of terms or the application of a function is implied without any glyph indicating the operation. Unicode 5.1 introduces the Mathematical Invisible Plus character as well (U+2064) which may indicate that an integral number followed by a fraction should denote their sum, but not their product.

Fraction slash

Example of fraction slash use. This typeface (Apple Chancery) shows the synthesized common fraction on the left and the precomposed fraction glyph on the right as a rendering the plain text string “1 1⁄4 1¼”. Depending on the text environment, the single string “1 1⁄4” might yield either result, the one on the right through substitution of the fraction sequence with the single precomposed fraction glyph.
A more elaborate example of fraction slash usage: plain text “4 221⁄225” rendered in Apple Chancery. This font supplies the text layout software with instructions to synthesize the fraction according to the Unicode rule described in this section.

The fraction slash character (U+2044) has special behavior in the Unicode Standard:[5] (section 6.2, Other Punctuation)

The standard form of a fraction built using the fraction slash is defined as follows: any sequence of one or more decimal digits (General Category = Nd), followed by the fraction slash, followed by any sequence of one or more decimal digits. Such a fraction should be displayed as a unit, such as ¾. If the displaying software is incapable of mapping the fraction to a unit, then it can also be displayed as a simple linear sequence as a fallback (for example, 3/4). If the fraction is to be separated from a previous number, then a space can be used, choosing the appropriate width (normal, thin, zero width, and so on). For example, 1 + ZERO WIDTH SPACE + 3 + FRACTION SLASH + 4 is displayed as 1¾.

By following this Unicode recommendation, text processing systems yield sophisticated symbols from plain text alone. Here the presence of the fraction slash character instructs the layout engine to synthesize a fraction from all consecutive digits preceding and following the slash. In practice, results vary because of the complicated interplay between fonts and layout engines. Simple text layout engines tend not to synthesize fractions at all, and instead draw the glyphs as a linear sequence as described in the Unicode fallback scheme.

More sophisticated layout engines face two practical choices: they can follow Unicode’s recommendation, or they can rely on the font’s own instructions for synthesizing fractions. By ignoring the font’s instructions, the layout engine can guarantee Unicode’s recommended behavior. By following the font’s instructions, the layout engine can achieve better typography because placement and shaping of the digits will be tuned to that particular font at that particular size.

The problem with following the font’s instructions is that the simpler font formats have no way to specify fraction synthesis behavior. Meanwhile, the more complex formats do not require the font to specify fraction synthesis behavior and therefore many do not. Most fonts of complex formats can instruct the layout engine to replace a plain text sequence such as "1⁄2" with the precomposed "½" glyph. But because many of them will not issue instructions to synthesize fractions, a plain text string such as "221⁄225" may well render as 22½25 (with the ½ being the substituted precomposed fraction, rather than synthesized). In the face of problems like this, those who wish to rely on the recommended Unicode behavior should choose fonts known to synthesize fractions or text layout software known to produce Unicode’s recommended behavior regardless of font.

Bidirectional Neutral Formatting

Writing direction is the direction glyphs are placed on the page in relation to forward progression of characters in the Unicode string. English and other languages of Latin script have left-to-right writing direction. Several major writing scripts, such as Arabic and Hebrew, have right-to-left writing direction. The Unicode specification assigns a directional type to each character to inform text processors how sequences of characters should be ordered on the page.

While lexical characters (that is, letters) are normally specific to a single writing script, some symbols and punctuation marks are used across many writing scripts. Unicode could have created duplicate symbols in the repertoire that differ only by directional type, but chose instead to unify them and assign them a neutral directional type. They acquire direction at render time from adjacent characters. Some of these characters also have a bidi-mirrored property indicating the glyph should be rendered in mirror-image when used in right-to-left text.

The render-time directional type of a neutral character can remain ambiguous when the mark is placed on the boundary between directional changes. To address this, Unicode includes characters that have strong directionality, have no glyph associated with them, and are ignorable by systems that do not process bidirectional text:

Surrounding a bidirectionally neutral character by the left-to-right mark will force the character to behave as a left-to-right character while surrounding it by the right-to-left mark will force it to behave as a right-to-left character. The behavior of these characters is detailed in Unicode’s Bidirectional Algorithm.

Bidirectional General Formatting

Further information: Bi-directional text

While Unicode is designed to handle multiple languages, multiple writing systems and even text that flows either left-to-right or right-to-left with minimal author intervention, there are special circumstances where the mix of bidirectional text can become intricate—requiring more author control. For these circumstances, Unicode includes five other characters to control the complex embedding of left-to-right text within right-to-left text and vice versa:

Interlinear annotation characters

Script-specific

Others

Whitespace, joiners, and separators

Main article: Whitespace character

Unicode provides a list of characters it deems whitespace characters for interoperability support. Software Implementations and other standards may use the term to denote a slightly different set of characters. For example, Java does not consider U+00A0   NO-BREAK SPACE or U+0085 <control-0085> (NEXT LINE) to be whitespace, even though Unicode does. Whitespace characters are characters typically designated for programming environments. Often they have no syntactic meaning in such programming environments and are ignored by the machine interpreters. Unicode designates the legacy control characters U+0009 through U+000D and U+0085 as whitespace characters, as well as all characters whose General Category property value is Separator. There are 25 total whitespace characters as of Unicode 8.0.

Grapheme joiners and non-joiners

The zero-width joiner (U+200D) and zero-width non-joiner (U+200C) control the joining and ligation of glyphs. The joiner does not cause characters that would not otherwise join or ligate to do so, but when paired with the non-joiner these characters can be used to control the joining and ligating properties of the surrounding two joining or ligating characters. The Combining Grapheme Joiner (U+034F) is used to distinguish two base characters as one common base or digraph, mostly for underlying text processing, collation of strings, case folding and so on.

Word joiners and separators

The most common word separator is a space (U+0020). However, there are other word joiners and separators that also indicate a break between words and participate in line-breaking algorithms. The No-Break Space (U+00A0) also produces a baseline advance without a glyph but inhibits rather than enabling a line-break. The Zero Width Space (U+200B) allows a line-break but provides no space: in a sense joining, rather than separating, two words. Finally, the Word Joiner (U+2060) inhibits line breaks and also involves none of the white space produced by a baseline advance.

Baseline Advance No Baseline Advance
Allow Line-break
(Separators) 		Space U+0020 Zero Width Space U+200B
Inhibit Line-break
(Joiners) 		No-Break Space U+00A0 Word Joiner U+2060

Other Separators

These provide Unicode with native paragraph and line separators independent of the legacy encoded ASCII control characters such as carriage return (U+000A), linefeed (U+000D), and Next Line (U+0085). Unicode does not provide for other ASCII formatting control characters which presumably then are not part of the Unicode plain text processing model. These legacy formatting control characters include Tab (U+0009), Line Tabulation or Vertical Tab (U+000B), and Form Feed (U+000C) which is also thought of as a page break.

Spaces

Further information: Space (punctuation)

The space character (U+0020) typically input by the space bar on a keyboard serves semantically as a word separator in many languages. For legacy reasons, the UCS also includes spaces of varying sizes that are compatibility equivalents for the space character. While these spaces of varying width are important in typography, the Unicode processing model calls for such visual effects to be handled by rich text, markup and other such protocols. They are included in the Unicode repertoire primarily to handle lossless roundtrip transcoding from other character set encodings. These spaces include:

  1. En Quad (U+2000)
  2. Em Quad (U+2001)
  3. En Space (U+2002)
  4. Em Space (U+2003)
  5. Three-Per-Em Space (U+2004)
  6. Four-Per-Em Space (U+2005)
  7. Six-Per-Em Space (U+2006)
  8. Figure Space (U+2007)
  9. Punctuation Space (U+2008)
  10. Thin Space (U+2009)
  11. Hair Space (U+200A)
  12. Medium Mathematical Space (U+205F)

Aside from the original ASCII space, the other spaces are all compatibility characters. In this context this means that they effectively add no semantic content to the text, but instead provide styling control. Within Unicode, this non-semantic styling control is often referred to as rich text and is outside the thrust of Unicode’s goals. Rather than using different spaces in different contexts, this styling should instead be handled through intelligent text layout software.

Three other writing-system-specific word separators are:

Line-break control characters

Several characters are designed to help control line-breaks either by discouraging them (no-break characters) or suggesting line breaks such as the soft hyphen (U+00AD) (sometimes called the "shy hyphen"). Such characters, though designed for styling, are probably indispensable for the intricate types of line-breaking they make possible.

Break Inhibiting

  1. Non-breaking hyphen (U+2011)
  2. No-break space (U+00A0)
  3. Tibetan Mark Delimiter Tsheg Bstar (U+0F0C)
  4. Narrow no-break space (U+202F)

The break inhibiting characters are meant to be equivalent to a character sequence wrapped in the Word Joiner U+2060. However, the Word Joiner may be appended before or after any character that would allow a line-break to inhibit such line-breaking.

Break Enabling

  1. Soft hyphen (U+00AD)
  2. Tibetan Mark Intersyllabic Tsheg (U+0F0B)
  3. Zero-width space (U+200B)

Both the break inhibiting and break enabling characters participate with other punctuation and whitespace characters to enable text imaging systems to determine line breaks within the Unicode Line Breaking Algorithm.[6]

Special code points

Among the millions of code points available in UCS, many are set aside for other uses or for designation by third parties. These set aside code points include non-character code points, surrogates, and private use code points. They may have no or few character properties associated with them.

Non-characters

Sixty-six non-character code points (labeled <not a character>) are set aside and guaranteed to never be used for a character. Each of the 17 planes has its two ending code points set aside as non-characters. So, noncharacters are: U+FFFE and U+FFFF on the BMP, U+1FFFE and U+1FFFF on Plane 1, and so on, up to U+10FFFE and U+10FFFF on Plane 16, for a total of 34 code points. In addition, there is a contiguous range of another 32 noncharacter code points in the BMP: U+FDD0..U+FDEF. Software implementations are therefore free to use these code points for internal use. One particularly useful example of a noncharacter is the code point U+FFFE. This code point has the reverse binary sequence of the byte order mark (U+FEFF). If a stream of text contains this noncharacter, this is a good indication the text has been interpreted with the incorrect endianness.

Versions of the Unicode standard from 3.1.0 to 6.3.0 claimed that noncharacters "should never be interchanged". Corrigendum #9 of the standard later stated that this was leading to "inappropriate over-rejection", clarifying that "[Noncharacters] are not illegal in interchange nor do they cause ill-formed Unicode text", and removing the original claim.

Surrogates

The UCS uses surrogates to address characters outside the initial Basic Multilingual Plane without resorting to more than 16 bit byte representations. By combining pairs of the 2,048 surrogate code points, the remaining characters in all the other planes can be addressed (1,024 × 1,024 = 1,048,576 code points in the other 16 planes). In this way, UCS has a built-in 16 bit encoding capability for UTF-16. These code points are divided into leading or "high surrogates" (D800–DBFF) and trailing or "low surrogates" (DC00–DFFF). In UTF-16, they must always appear in pairs, as a high surrogate followed by a low surrogate, thus using 32 bits to denote one code point.

A surrogate pair denotes the code point

1000016 + (H − D80016) × 40016 + (L − DC0016)

where H and L are the numeric values of the high and low surrogates respectively.

Since high surrogate values in the range DB80–DBFF always produce values in the Private Use planes, the high surrogate range can be further divided into (normal) high surrogates (D800–DB7F) and "high private use surrogates" (DB80–DBFF).

Isolated surrogate code points have no general interpretation; consequently, no character code charts or names lists are provided for this range. In the Python programming language, individual surrogate codes are used to embed undecodable bytes in Unicode strings.[7]

Private use

Main article: Private Use Areas

The UCS includes 137,468 code points for private use in three different ranges, each called a Private Use Area (PUA). The Unicode standard recognizes code points within PUAs as legitimate Unicode character codes, but does not assign them any (abstract) character. Instead, individuals, organizations, software vendors, operating system vendors, font vendors and communities of end-users are free to use them as they see fit. Within closed systems, characters in the PUA can operate unambiguously, allowing such systems to represent characters or glyphs not defined in Unicode. In public systems their use is more problematic, since there is no registry and no way to prevent several organizations from adopting the same code points for different purposes. One example of such a conflict is Apple’s use of U+F8FF for the Apple logo, versus the ConScript Unicode Registry’s use of U+F8FF as klingon mummification glyph in the Klingon script.[8]

The Basic Multilingual Plane includes a PUA in the range from U+E000 to U+F8FF (6,400 code locations). Plane Fifteen and Plane Sixteen have a PUAs that consist of all but their final two code locations, which are designated non-characters. The PUA in Plane Fifteen is the range from U+F0000 to U+FFFFD (65,534 code locations). The PUA in Plane Sixteen is the range from U+100000 to U+10FFFD (65,534 code locations).

PUAs are a concept inherited from certain Asian encoding systems. These systems had private use areas to encode what the Japanese call gaiji (rare characters not normally found in fonts) in application-specific ways.

Characters grapheme clusters and glyphs

Whereas many other character sets assign a character for every, possible glyph representation of the character, Unicode seeks to treat characters separate from glyphs. This distinction is not always unambiguous, however a few examples will help illustrate the distinction. Often two characters may be combined together to typographically improve the readability of the text. For example, the three letter sequence "ffi", may be treated as a single glyph. Other characters sets would often assign a code point to this glyph in addition to the individual letters: "f" and "i".

In addition, Unicode approaches diacritic modified letters as separate characters that, when rendered, become a single glyph. For example, an "o" with diaeresis: "ö". Traditionally, other character sets assigned a unique character code point for each diacritic modified letter used in each language. Unicode seeks to create a more flexible approach by allowing combining diacritic characters to combine with any letter. This has the potential to significantly reduce the number of active code points needed for the character set. As an example, consider a language that uses the Latin script and combines the diaeresis with the upper- and lower-case letters "a", "o", and "u". With the Unicode approach, only the diaeresis diacritic character needs to be added to the character set to use with the Latin letters: "a", "A", "o", "O", "u", and "U": seven characters in all. A legacy character sets needs to add six precomposed letters with a diaeresis in addition to the six code points it uses for the letters without diaeresis: twelve character code points in total.

Compatibility characters

UCS includes thousands of characters that Unicode designates as compatibility characters. These are characters that were included in UCS in order to provide distinct code points for characters that other character sets differentiate, but would not be differentiated in the Unicode approach to characters.

The chief reason for this differentiation was that Unicode makes a distinction between characters and glyphs. For example, when writing English in a cursive style, the letter "i" may take different forms whether it appears at the beginning of a word, the end of a word, the middle of a word or in isolation. Languages such as Arabic written in an Arabic script are always cursive. Each letter has many different forms. UCS includes 730 Arabic form characters that decompose to just 88 unique Arabic characters. However, these additional Arabic characters are included so that text processing software may translate text from other characters sets to UCS and back again without any loss of information crucial for non-Unicode software.

However, for UCS and Unicode in particular, the preferred approach is to always encode or map that letter to the same character no matter where it appears in a word. Then the distinct forms of each letter are determined by the font and text layout software methods. In this way, the internal memory for the characters remains identical regardless of where the character appears in a word. This greatly simplifies searching, sorting and other text processing operations.

Character properties

Every character in Unicode is defined by a large and growing set of properties. Most of these properties are not part of Universal Character Set. The properties facilitate text processing including collation or sorting of text, identifying words, sentences and graphemes, rendering or imaging text and so on. Below is a list of some of the core properties. There are many others documented in the Unicode Character Database.[9]

Property Example Details
Name LATIN CAPITAL LETTER A This is a permanent name assigned by the joint cooperation of Unicode and the ISO UCS
Code Point U+0041 The Unicode code point is a number also permanently assigned along with the "Name" property and included in the companion UCS. The usual custom is to represent the code point as hexadecimal number with the prefix "U+" in front.
Representative Glyph [10] The representative glyphs are provided in code charts.[11]
General Category Uppercase_Letter The general category[12] is expressed as a two-letter sequence such as "Lu" for uppercase letter or "Nd", for decimal digit number.
Combining Class Not_Reordered (0) Since diacritics and other combining marks can be expressed with multiple characters in Unicode the "Combining Class" property allows characters to be differentiated by the type of combining character it represents. The combining class can be expressed as an integer between 0 and 255 or as a named value. The integer values allow the combining marks to be reordered into a canonical order to make string comparison of identical strings possible.
Bidirectional Category Left_To_Right Indicates the type of character for applying the Unicode bidirectional algorithm.
Bidirectional Mirrored no Indicates the character’s glyph must be reversed or mirrored within the bidirectional algorithm. Mirrored glyphs can be provided by font makers, extracted from other characters related through the “Bidirectional Mirroring Glyph” property or synthesized by the text rendering system.
Bidirectional Mirroring Glyph N/A This property indicates the code point of another character whose glyph can serve as the mirrored glyph for the present character when mirroring within the bidirectional algorithm.
Decimal Digit Value NaN For numerals, this property indicates the numeric value of the character. Decimal digits have all three values set to the same value, presentational rich text compatibility characters and other Arabic-Indic non-decimal digits typically have only the latter two properties set to the numeric value of the character while numerals unrelated to Arabic Indic digits such as Roman Numerals or Hanzhou/Suzhou numerals typically have only the "Numeric Value" indicated.
Digit Value NaN
Numeric Value NaN
Ideographic False Indicates the character is an ideograph.
Default Ignorable False Indicates the character is ignorable for implementations and that no glyph, last resort glyph, or replacement character need be displayed.
Deprecated False Unicode never removes characters from the repertoire, but on occasion Unicode has deprecated a small number of characters.

Unicode provides an online database[13] to interactively query the entire Unicode character repertoire by the various properties.

See also

References

  1. ↑ "The Unicode Standard". The Unicode Consortium. Retrieved 2015-06-09.
  2. ↑ "Roadmaps to Unicode". The Unicode Consortium. Retrieved 2015-06-09.
  3. ↑ "The Unicode Standard, Version 7.0" (PDF). Section 2.13 Special Characters. The Unicode Consortium. 2014-10-01.
  4. ↑ "The Unicode Standard, Version 7.0" (PDF). Section 4.12 Characters with Unusual Properties. The Unicode Consortium. 2014-10-01.
  5. ↑ "The Unicode Standard, Version 7.0" (PDF). Section 6.2: General Punctuation. The Unicode Consortium. 2014-10-01.
  6. ↑ "UAX #14: Unicode Line Breaking Algorithm". The Unicode Consortium. 2014-10-01. Retrieved 2015-06-09.
  7. ↑ v. Löwis, Martin (April 22, 2009), "Non-decodable Bytes in System Character Interfaces", Python Enhancement Proposals, PEP 383, retrieved 2015-06-09
  8. ↑ Michael Everson (2004-01-15). "Klingon: U+F8D0 - U+F8FF".
  9. ↑ "Unicode Character Database". The Unicode Consortium. Retrieved 2015-06-09.
  10. ↑ Not the official Unicode representative glyph, but merely a representative glyph. To see the official Unicode representative glyph, see the code charts.
  11. ↑ "Character Code Charts". The Unicode Consortium. Retrieved 2015-06-09.
  12. ↑ "UAX #44: Unicode Character Database". General Category Values. The Unicode Consortium. 2014-06-05. Retrieved 2015-06-09.
  13. ↑ "Unicode Utilities: Character Property Index". The Unicode Consortium. Retrieved 2015-06-09.

External links

Wikimedia Commons has media related to Unicode.
This article is issued from Wikipedia - version of the Friday, March 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.