Nakajima Ha5

Ha-5
Type 14-cylinder, air-cooled, two-row radial piston engine
National origin Japan
Manufacturer Nakajima Aircraft Company
Major applications Mitsubishi Ki-21
Mitsubishi Ki-30
Mitsubishi Ki-57
Nakajima Ki-49 (Ha-41/Ha-109)

Nakajima Ki-44 (Ha-41/Ha109)

Developed into Nakajima Sakae

The Nakajima Ha-5 is a twin row, 14 cylinder air-cooled radial aircraft engine built by the Japanese Nakajima Aircraft Company. The engine was a development of earlier single-row Japanese engines, the Kotobuki and Hikari, which had combined features of the Bristol Jupiter and Pratt & Whitney R-1340 Wasp designs. First introduced in a 1,000 PS prototype in 1933, about 7,000 civilian and 5,500 military Ha-5's were built during World War II. The Ha-5 had separate cam-discs for the front and rear rows of cylinders like American designs, rather than using a single, front-mounted cam-disc with long and short pushrods to operate both rows of cylinder valves. The Ha-5 was a twin-row development of the Nakajima Hikari, which was itself a development of the Nakajima Kotobuki. It spawned several improved variants, namely the Ha-41, with a two-stage supercharger, and the Ha-109, which featured a two-speed, two stage supercharger. The later Ha-219 was based on the same cylinder design, but was increased in size to 18 cylinders.

Design and development

In 1917, Chikuhei Nakajima set up the "Airplane Institute" at Ojima Town in Gunma Prefecture. In 1918 they built their first airplane; the "Nakajima Type 1" with a U.S.A. made engine.[1] In 1920 the company sent Kimihei Nakajima to France to study European advances, and in 1922 started their own engine factory in Tokyo. This led to production of engines based on the Lawrance A-3 two-cylinder air-cooled horizontally opposed engine.

At the time the Lawrance was an oddity. Most air-cooled engines at that time were rotary engines, using cylinders that rotated together with the propeller with a fixed crankshaft, in order to improve cooling but Kimihei overheard that an engine with good cooling capability with stationary cylinders was being developed in England: a radial engine. He observed the English Gloster Gamecock fighter with its Bristol Jupiter engine, which was an advanced design for the era with an automatic adjustment device for tappet clearance, spiral intake piping for even charge air distribution, and a four-valve intake and exhaust system. He acquired a manufacturing license for the Jupiter in 1925.[2] In 1927, after inviting two production engineer instructors from the Bristol company, the Jupiter Type 6 of 420 PS and Type 7 of 450 PS with a supercharger were put into production at the Nakajima factory.

After studying the Pratt & Whitney Wasp 9-cylinder radial, Nakajima tried to combine the good points found in Jupiter design with the rational design of the Wasp. Nakajima then produced a series of engine types, named "AA", "AB", "AC", and "AD", as engineering exercises.[1] The next engine design, the "AE", was innovative, with a bore of 160 mm and a stroke of 170 mm.

Prototypes were made and performance tests were done, but this engine was not adopted due to its very complex engineering. Nakajima continued testing different cylinder designs. In 1929, the "AH" design, with bore and stroke of 146 × 160 mm and a total displacement of 24.1 L, was completed. This was to be the final version of this basic engine design.[1]

In June 1930 the first prototype of was completed and it passed the durability test for the type approval in the summer. Then flight tests were started using a Nakajima A2N carrier plane. Nakajima had successfully designed the first original Japanese air-cooled 9-cylinder engine, the 450 PS "Kotobuki", which would over time be developed into the Ha-5 and its successors. In December 1931, this engine was approved and adopted by the Navy for the Navy Type 96 Carrier fighter. The engine was named, in connection with the Jupiter engine, "Kotobuki".[1]

The "Kotobuki" engine was improved and developed into the "Hikari (light)" engine with the bore and stroke expanded to the limit of the cylinder (160 × 180 mm for a displacement of 32.6 L), with the power was increased to 720 PS. The "Hikari" was used in Type 95 carrier fighters and Type 96 Carrier Attack Plane.[1]

Nakajima knew that engines of higher power would be needed and began work on the Ha-5, a new 14-cylinder, twin-row design that was based on the 160 × 180 mm cylinder of the Hikari. The Ha-5 prototype engine was completed in 1933, producing 1,000 PS. An improved Ha-5 was developed as a 1,500 PS engine. In all about 5,500 Ha-5 engines were produced for the military.[1]

Later on, as the weights of aircraft rose and higher speeds were required, Nakajima continued to improve the Ha-5 design, creating the "Ha-41" and "Ha-109", which shared the same 146mm x 160mm bore and stroke as the Ha-5, but were increased from the 950 hp of the Ha5 to 1,260 hp and 1,440 hp, respectively. The unified code for the Ha-41 was "Ha-34". Later the engine was developed into an 18 cylinder, twin-row engine called the "Ha-219", but this never got past the development phase before the war ended. All these engines used essentially the same cylinder heads, the differences being in supercharging systems and maximum engine revolutions per minute. The Ha-5 and Ha-41 shared the same weight of 630 kg, while the Ha-109 weighed 720 kg due to its larger, twin-stage supercharger system. The Ha-41 was the primary engine of early variants of the Nakajima Ki-49 "Helen" bomber, and the Nakajima Ki-44 "Tojo" fighter, later versions of both planes using the more powerful Ha-109 engine. Early versions of the Mitsubishi Ki-21 "Sally" used the Ha-5. The Ha-41 would have been an ideal powerplant in aircraft that used the Mitsubishi Kasei, being of smaller dimensions and displacement, yet making equivalent power levels.

Variants

Ha-5
634 kW (850 hp), Base design, (used on Mitsubishi Ki-21 Army Type 97 Heavy Bomber)[3]
Ha-5-KAI
634 kW (850 hp), (used on Mitsubishi Ki-30)[4]
Ha-5
660 kW (890 hp) (used on Nakajima Ki-19)[5]
Ha-5-KAI
708 kW (950 hp), (used on Mitsubishi Ki-57 and Ki-57-I Army Type 100 Transport Model 1)[6]
Ha-5-KAI
708 kW (950 hp) take-off, 805 kW (960 hp) at 3,000 m (11,810 ft), (used on Mitsubishi Ki-30 and on first prototype Nakajima Ki-49 Donryu)[7]
Ha-5-KAI
708 kW (950 hp) take-off, 805 kW (1,080 hp) at 4,000 m (13,125 ft), (used on Mitsubishi Ki-21-I Army Type 97 Heavy Bomber Model 1 and Ki-21-Ia, Army Type 97 Heavy Bomber Model 1A)[3]
Ha-41
1,260 hp@2,500rpm takeoff, 1,260 hp@2,450rpm @ 3,700m
Ha-109
1,500 hp@2,650rpm takeoff, 1,440 hp@2,600rpm @ 5,200m

Applications

The Ha5 engine was used to power:

The Ha41 engine was used to power:

The Ha109 engine was used to power:


Specifications (Nakajima Ha-5)

Data from Engine development at Nakajima 1923 - 1945
Engine History of Nakajima Aircraft.[8]

General characteristics

Components

Performance

See also

Related development
Comparable engines
Related lists

References

Notes

  1. 1 2 3 4 5 6 Engine development at Nakajima 1923 - 1945
  2. ↑ Gunston 1989, p.104.
  3. 1 2 Francillon pg 162
  4. ↑ Francillon pg 167
  5. ↑ Mikesh & Abe pg 221
  6. ↑ Francillon pg 184
  7. ↑ Francillon pg 228
  8. ↑ Engine History of Nakajima Aircraft ISBN 4-87357-007-7

Bibliography

External links

This article is issued from Wikipedia - version of the Friday, March 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.