RAPIEnet
| RAPIEnet | |
|---|---|
 | |
| Protocol Information | |
| Type of Network | Open Real-time Ethernet |
| Physical Layer | IEEE 802.3, Ethertype 0x88fe |
| Network Topology | Ring or Line topology |
| Device Addressing | DIP switch or hardware/software |
| Network Configuration | Automatically done by protocol |
RAPIEnet (Real-time Automation Protocols for Industrial Ethernet) is Korea's first Ethernet international standard for real-time data transmission.
- An Ethernet-based industrial networking protocol [1] developed in-house by LSIS guarantees real-time transmission and is registered as an international standard.[2] (IEC 61158-3-21: 2010, IEC 61158-4-21: 2010, IEC 61158-5-21: 2010, IEC 61158-6-21: 2010, IEC 61784-2: 2010, IEC 62439-7)
- An embedded Ethernet switch with two ports enables the network expansion in a daisy chain without the need for an additional external switch, easy installation and wiring reduction.[1]
- Supports "Store & Forward”and “Cut Through” switching.[1]
Acquired Standards
International Standards
- IEC 61158-3-21: 2010, Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 elements.[4]
- IEC 61158-4-21: 2010, Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements.[1]
- IEC 61158-5-21: 2010, Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 elements.[5]
- IEC 61158-6-21: 2010, Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 elements.[6]
- IEC 61784-2: 2010, Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3.[7]
- IEC 62439-7, Industrial communication networks - High availability automation networks - Part 7: Ring-based Redundancy Protocol (RRP) [8]
RAPIEnet Technology
Protocol Stack Structure
Figure 1. RAPIEnet Protocol Stack Structure
Embedded dual port switch motion
Figure 2. RAPIEnet Embedded dual port switch motion
- An embedded hardware-based switch is adopted for real-time data transmission.
- With the full-duplex communication support, each node has dual link routes in a ring topology.
Frame Format
Figure 3. ISO/IEC 8802.3 RAPIEnet based RAPIEnet frame format
- RAPIEnet Ether type: 0x88FE[9]
Topology
Figure 4. RAPIEnet chain topology
Figure 5. RAPIEnet ring topology
Recovery System
- With an embedded switch and full-duplex, it has dual link routes and communication fault tolerance, enabling fast recovery capabilities.
- - Recovery time < 10 ms[1]
Figure 6. RAPIEnet recovery system in a ring topology
- Transmits signal from Device 1 to Device 3.
- A fault occurs between Device 2 and Device 3.
- Notify the fault from Device 2 to Device 1.
- Transmits signal back from Device 1 to Device 3.
Flexible Hybrid Structure
Figure 7. RAPIEnet Flexible Hybrid Structure
- Fiber Optics/Copper Media
- - Copper: Low installation costs with relatively big noise.
- - Optics: High installation costs with low noise and relatively long wiring.
- Simple and efficient wiring is available by combining the features of two wires that have advantages and disadvantages.
System Diagram Using RAPIEnet
Figure 8. System diagram using RAPIEnet
Others
Other international standards in process
- IEC 61784-5-17, Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 (to be registered as an IEC international standard in 2012)[10]
References
- 1 2 3 4 5 6 7 IEC 61158-4-21: 2010
- ↑ RAPIEnet related articles
- ↑ ISO/IEC 8802-3: 2000
- ↑ IEC 61158-3-21: 2010
- ↑ IEC 61158-5-21: 2010
- ↑ IEC 61158-6-21: 2010
- ↑ IEC 61784-2: 2010
- ↑ IEC 62439-7
- ↑ IEEE - Ether type
- ↑ IEC 61784-5-17
This article is issued from Wikipedia - version of the Friday, March 22, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.