Rapid transit technology
Rapid transit technology describes the use of infrastructure and technology on rapid transit (also called "metro" or "subway" systems), which in many aspects has changed significantly over the years since the first underground railway lines opened in London in 1863.
Train size
Some urban rail lines are built with a loading gauge equivalent to the full size of main-line railways; others use smaller tunnels, restricting the size and sometimes the shape of the trains, as in the London Underground where the informal term tube train is commonly used. There are lines which use light rail rolling stock, perhaps trams or streetcars, that are simply routed into a tunnel, viaduct, or other grade-separated alignment for all or part of their route (as in Philadelphia, where the tunnels are shared with full-size heavy rail trains). These sections often lead to varying platform heights and may also account for a sizable "gap" between the train and the platform. In many cities, such as Berlin and Boston, lines using different sizes or types of vehicles are organised into a single unified system (though often not connected by track, although when they are, rolling stock may be compatible on each other's lines for non-revenue transfers or other purposes).
Motive power
Although the initial lines of what is now the London Underground used steam engines, virtually all metro trains, both now and historically, are electrically powered and built as multiple units. Most use steel wheels running on two steel rails, as in a conventional railway, although some use other methods (described below). Power for the trains, referred to as traction power, is commonly supplied by means of a single live third rail (as in New York), usually at 600 to 750 volts, although a few systems use two live rails (notably in London but also in Milan) and thus eliminate the return current from the running rails. This is mainly due to the limited overhead clearance of the tunnels, often physically preventing the use of overhead wires.
While networks that do use wires allow higher voltages to be used for the power supply, they are more likely to be used on metro systems without much length in tunnel, as in Shanghai; but they also occur on some that are predominantly underground, as in Madrid. Furthermore, lines that utilize street running while on the surface (such as Boston's Green Line) tend to derive power fully from overhead wires, both while traveling in a tunnel in the central city and at street level in the suburban areas, as a third rail would make the track unsafe for road vehicles, especially at level crossings. There are also lines that make use of both systems, often switching between the two at some location (an example of this being in Rotterdam and formerly in Chicago).
Systems generally use DC power rather than AC, even though this requires large rectifiers for the power supply. DC motors were formerly more efficient for railway applications, and once a DC system is in place, converting it to AC is generally considered too large a project to contemplate.
Tracks
Most rapid transit systems use conventional railway tracks and standard gauge, although since tracks in subway tunnels are not exposed to rain, snow, or other forms of precipitation, they are often fixed directly to the floor rather than resting on ballast (Amsterdam being an exception). Parts of the light rail system in San Diego, California operates on former railroad rights of way that were acquired by the governing entity.
An alternative technology, using rubber tires on narrow concrete or steel rollways, was pioneered on certain lines of the Paris Métro, and the first completely new system to use it was in Montreal, Canada. On most of these networks, additional horizontal wheels are required for guidance, and a conventional track is often provided in case of flat tires and for switching. There are also some rubber-tired systems that use a central guide rail, such as the Sapporo Municipal Subway and the NeoVal system, to be used in Rennes in France. Advocates of this system note that it is much quieter than conventional steel-wheeled trains, and allows for greater inclines given the increased traction allowed by the rubber tires.
Some cities with steep hills incorporate mountain railway technologies into their metros. One of the lines of the Lyon Metro includes a section of rack (cog) railway, while the Carmelit in Haifa is an underground funicular.
For elevated lines, still another alternative is the monorail. They can be built either as supported or straddle-beam monorails (with a single rail below the train, including the Tokyo Monorail and certain Chongqing Rail Transit lines), or as a suspended monorail, where the train body hangs below the wheels and rail (the most famous of these being the Wuppertal Schwebebahn). While monorails have never gained wide acceptance outside Japan, there are some which are widely used. This includes the Seattle Monorail, which has one short line dating to the World's Fair of 1962; however, local voters have decided against expanding the system. Another recently built line operates in Las Vegas. An older system, also one of the first monorail systems in the United States, was installed in 1959 at Disneyland in California and connects the amusement park to a nearby hotel. The designer of the system, Walt Disney, once offered to build a similar system between Anaheim and Los Angeles.
Crew size and automation
In the early days of underground railways, at least two staff members operated each train: one or more attendants (also called "conductor" or "guard") to operate the doors or gates, as well as a driver (also called the "engineer" or "motorman"). The introduction of powered doors around 1920 permitted crew sizes to be reduced, and trains in many cities are now operated by a single person. Where the operator would not be able to see the whole side of the train to tell whether the doors can be safely closed, mirrors or closed-circuit TV monitors are often provided for that purpose.
A replacement system for human drivers became available in the 1960s, with the advancement of computerized technologies for automatic train control and later automatic train operation, which could start a train, accelerate to the correct speed, and stop automatically in the correct position on the railway platform at the next station, also taking into account the information that a human driver would obtain from lineside or cab signals. The first metro line to use this technology in its entirety was London's Victoria line, opened in 1968. In normal operation the crew member sits in the driver's position at the front, but just closes the doors at each station; by pressing two "start" buttons the train would then move automatically to the next station. This style of "semi-automatic train operation" (STO), known technically as "Grade of Automation (GoA) 2", has become widespread, especially on newly built lines like the BART network in the San Francisco Bay Area.
A variant of ATO, "driverless train operation" (DTO) or technically "GoA 3", is seen on some systems, as in London's Docklands Light Railway, which opened in 1987. Here, a "passenger service agent" (formerly called "train captain") would ride with the passengers rather than sitting at the front as a driver would, but would also have the same responsibilities as a driver in a GoA 2 system. This same technology would have allowed trains to operate completely automatically with no crew, just as most elevators do; when the initially increasing costs for automation began to decrease, this became a financially attractive option for employers. At the same time, countervailing arguments stated that in an emergency situation, a crew member on board the train would have possibly been able to prevent the emergency in the first place, drive a partially failed train to the next station, assist with an evacuation if needed, or call for the correct emergency services (police, fire, or ambulance) and help direct them to the location where the emergency occurred. In some cities the same reasons are considered to justify a crew of two rather than one; one person drives from the front of the train, while the other operates the doors from a position farther back, and is more conveniently able to assist passengers in the rear cars. They may even be able to justify the presence of a crew entirely as opposed to none, as in the Scarborough RT line in Toronto.
Completely unmanned trains, or "unattended train operation" (UTO) or technically "GoA 4", are more accepted on newer systems where there are no existing crews to be removed, and especially on light metro (medium-capacity) lines. One of the first such systems was the VAL (véhicule automatique léger or "automated light vehicle"), first used in 1983 on the Lille Metro in France. Additional VAL lines have been built in other cities (such as Toulouse, also in France, and Turin in Italy). Another system that uses unmanned trains is Bombardier's Innovia Metro, originally developed by the Urban Transportation Development Corporation as the ICTS. It was later used on the SkyTrain in Vancouver, British Columbia, which carries no crew members, and the Kelana Jaya Line in Kuala Lumpur, Malaysia. (The Scarborough RT, which uses otherwise identical trains, uses human operators, as described above.)
Systems which use automatic trains also commonly employ full-height platform screen doors (PSDs, alternatively called platform edge doors or PEDs) or half-height automatic platform gates in order to improve safety and ensure passenger confidence, but this is not universal, as networks like Nuremberg do not, using infrared sensors instead to detect obstacles on the track. Conversely, some lines which retain drivers or manual train operation nevertheless use PEDs, notably London's Jubilee Line Extension and upcoming Crossrail heavy rail line. The first network to install PSDs on an already operational system was Hong Kong's MTR, followed by the Singapore MRT. Rapid transit systems in the United States do not use PEDs, except the monorail in Las Vegas and the under-construction Honolulu Rail Transit line, because their hot desert climates would make an uncontrolled outdoor waiting environment feel uncomfortable for passengers.
As for larger trains, the Paris Métro has human drivers on most lines, but runs crewless trains on its newest line, Line 14, which opened in 1998. The older Line 1 was subsequently converted to unattended operation by 2012 and it is expected that Line 4 would follow by 2019. The North East MRT Line in Singapore, which opened in 2003, is the world's first fully automated underground urban heavy rail line. The MTR Disneyland Resort Line is also automated, along with trains on the future South Island Line.
Urban people mover systems also tend to use fully automated and unstaffed trains, though to a much smaller scale. This is used in the LRT lines of Singapore and Macau, along with the Metromover in Miami, Florida and the Jacksonville Skyway.
Tunnel construction
The construction of an underground metro is an expensive project, often carried out over a number of years. There are several different methods of building underground lines.
In one common method, known as cut-and-cover (used in the first New York City subway line), the city streets are excavated and a tunnel structure strong enough to support the road above is built at the trench, which is then filled in and the roadway rebuilt. This method (used for most of the underground parts of the São Paulo Metro and Guadalajara light rail system, for example) often involves extensive relocation of the utilities commonly buried not far below city streets – particularly power and telephone wiring, water and gas mains, and sewers. This relocation must be done carefully, as according to documentaries from the National Geographic Society, one of the causes of the April 22, 1992 explosions in Guadalajara was a misrelocated water pipeline. The structures are typically made of concrete, perhaps with structural columns of steel; in the oldest systems, brick and cast iron were used. Cut-and-cover construction can take so long that it is often necessary to build a temporary roadbed while construction is going on underneath in order to avoid closing main streets for long periods of time; in Toronto, a temporary surface on Yonge Street supported cars and streetcar tracks for several years while the first segment of the Yonge subway was built.
Some American cities, like Newark, Cincinnati and Rochester, were initially built around canals. When they were replace by railways, the builders were able to bury a subway in the disused canal's trench, without rerouting other utilities, or acquiring a right of way piecemeal.
Another usual type of tunneling method is called bored tunnelling. Here, construction starts with a vertical shaft from which tunnels are horizontally dug, often with a tunnelling shield, thus avoiding almost any disturbance to existing streets, buildings, and utilities. But problems with ground water are more likely, and tunnelling through native bedrock may require blasting. (The first city to extensively use deep tunneling was London, where a thick sedimentary layer of clay largely avoids both problems.) The confined space in the tunnel also limits the machinery that can be used, but specialised tunnel-boring machines are now available to overcome this challenge. One disadvantage with this, however, is that the cost of tunnelling is much higher than building systems cut-and-cover, at-grade or elevated. Early tunnelling machines could not make tunnels large enough for conventional railway equipment, necessitating special low, round trains, such as are still used by most of the London Underground, which cannot install air conditioning on most of its lines because the amount of empty space between the trains and tunnel walls is so small. Other lines were built with cut-and-cover and have since been equipped with air-conditioned trains.
The deepest metro system in the world was built in St. Petersburg, Russia where in the marshland, stable soil starts more than 50 metres (160 ft) deep. Above that level the soil mostly consists of water-bearing finely dispersed sand. Because of this, only three stations out of nearly 60 are built near the ground level and three more above the ground. Some stations and tunnels lie as deep as 100–120 metres (330–390 ft) below the surface. However, the location of the world's deepest station is not as clear. Usually, the vertical distance between the ground level and the rail is used to represent the depth. Among the possible candidates are:
- Deepest stations in Saint Petersburg Metro, Russia:
- Admiralteyskaya (The Admiralty, 102 metres (335 ft), launched 2011, probably the best candidate)
- Komendantsky Prospekt (The Commandant Avenue, 78 metres (256 ft), launched 2005)
- Chernyshevskaya (Chernyshevsky, 70 metres (230 ft), launched 1958)
- Ploshad Lenina (Lenin Square, 72 metres (236 ft), launched 1958)
- Arsenalna station in Kiev Metro, Ukraine (105.5 metres (346 ft), launched 1960, built under a hill)
- Park Pobedy station in Moscow (~80 metres (260 ft), launched 2005, built under a hill)
- Puhung station in Pyongyang Metro, North Korea (which doubles as a nuclear shelter)
- Washington Park MAX Light Rail station in Portland, Oregon (built under a hill), 260 feet (80 m)
One advantage of deep tunnels is that they can dip in a basin-like profile between stations, without incurring significant extra costs due to having to dig deeper. This technique, also referred to as putting stations "on humps", allows gravity to assist the trains as they accelerate from one station and brake at the next. It was used as early as 1890 on parts of the City and South London Railway, and has been used many times since, particularly in Montreal.
The West Island Line, an extension to the MTR Island Line serving western Hong Kong Island opened in 2015, has two stations (Sai Ying Pun and HKU) situated over 100 metres (330 ft) below the ground level, to serve passengers on the Mid-levels. They have several entrances/exits equipped with high-speed lifts, instead of escalators; these kinds of exits have existed in many London Underground stations and other stations in former Soviet Union nations.