Spindle turning

Spindle turning, or turning between centers, is a woodturning method referring to a piece of wood on a wood lathe that is being turned on its center axis.^[1]

Method

For spindle turning, the wood is held on the lathe either by both ends (between the headstock and tailstock) or by one end only.

Wood is generally removed by running a turning tool down the slope of the wood from a larger diameter in the wood to a smaller diameter.

Examples

Spindle turning is the method used for items such as chair and table legs, lamps, cues, bats, candlesticks etc. i.e. long and thin objects.

Notes

↑ Clifford, Brian. "Woodturning - Grain and other factors", 1999. Accessed April 30, 2007.

Woodworking

Overviews

Forms

Woods

Soft	Cedar (Calocedrus, Cedrus) Cypress Douglas fir Fir Juniper Larch Pine Spruce Yew

Hard	Ash Alder Aspen Balsa Beech Birch Cherry Chestnut Ebony Elm Hazel Lignum vitae Linden (lime, basswood) Mahogany Maple Oak Padauk Plum Poplar Teak Totara Walnut Willow

Tools

Abrasives Axe Adze Chisel Clamp Drawknife Drill Float Mallet Milling machine Mitre box Moulding plane Plane Rasp Router Sandpaper Spokeshave Timber-framing Vise Winding sticks Wood scribe Workbench

Saws	Backsaw Bandsaw Bow Bucksaw Chainsaw Circular Compass Coping Crosscut Frame Fretsaw Jigsaw Keyhole Miter Rip Scroll Veneer Whipsaw

Geometry

Joints	Birdsmouth Bridle Butt Butterfly Coping Crown of thorns Dados Dovetail Finger Groove Halved Hammer-headed tenon Knee Lap Mason's mitre Miter Mortise and tenon Rabbet/Rebate Scarf Splice Tongue and groove

Profiles	Bead Bevel Chamfer Molding Ogee Ogive

Treatments

Organizations

Conversion

Techniques

Category
WikiProject
Commons

This article is issued from Wikipedia - version of the Tuesday, October 09, 2012. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.