Rhombic dodecahedron

Rhombic dodecahedron

(Click here for rotating model)
TypeCatalan solid
Coxeter diagram
Conway notationjC
Face typeV3.4.3.4

rhombus
Faces12
Edges24
Vertices14
Vertices by type8{3}+6{4}
Symmetry groupOh, B3, [4,3], (*432)
Rotation groupO, [4,3]+, (432)
Dihedral angle120°
Propertiesconvex, face-transitive isohedral, isotoxal, parallelohedron

Cuboctahedron
(dual polyhedron)
Net

In geometry, the rhombic dodecahedron is a convex polyhedron with 12 congruent rhombic faces. It has 24 edges, and 14 vertices of two types. It is a Catalan solid, and the dual polyhedron of the cuboctahedron.

Properties

The rhombic dodecahedron is a zonohedron. Its polyhedral dual is the cuboctahedron. The long diagonal of each face is exactly √2 times the length of the short diagonal, so that the acute angles on each face measure arccos(1/3), or approximately 70.53°.

Being the dual of an Archimedean polyhedron, the rhombic dodecahedron is face-transitive, meaning the symmetry group of the solid acts transitively on the set of faces. In elementary terms, this means that for any two faces A and B there is a rotation or reflection of the solid that leaves it occupying the same region of space while moving face A to face B.

The rhombic dodecahedron is one of the nine edge-transitive convex polyhedra, the others being the five Platonic solids, the cuboctahedron, the icosidodecahedron and the rhombic triacontahedron.

A garnet crystal

The rhombic dodecahedron can be used to tessellate three-dimensional space. It can be stacked to fill a space much like hexagons fill a plane.

This polyhedron in a space-filling tessellation can be seen as the Voronoi tessellation of the face-centered cubic lattice. Some minerals such as garnet form a rhombic dodecahedral crystal habit. Honey bees use the geometry of rhombic dodecahedra to form honeycombs from a tessellation of cells each of which is a hexagonal prism capped with half a rhombic dodecahedron. The rhombic dodecahedron also appears in the unit cells of diamond and diamondoids. In these cases, four vertices (alternate threefold ones) are absent, but the chemical bonds lie on the remaining edges.[1]

The graph of the rhombic dodecahedron is nonhamiltonian.

Dimensions

If the edge length of a rhombic dodecahedron is a, the radius of an inscribed sphere (tangent to each of the rhombic dodecahedron's faces) is

r_i = \frac{\sqrt{6}}{3}a \approx 0.8164965809a,  A157697

the radius of the midsphere is

r_m = \frac{2\sqrt{2}}{3}a \approx 0.94280904158a,  A179587.

and the radius of the circumscribed sphere is

r_o = \frac{2\sqrt{3}}{3}a \approx 1.154700538a,  A020832.

Area and volume

The area A and the volume V of the rhombic dodecahedron of edge length a are:

A = 8\sqrt{2}a^2 \approx 11.3137085a^2
V = \frac{16}{9} \sqrt{3}a^3 \approx 3.07920144a^3

Orthogonal projections

The rhombic dodecahedron has four special orthogonal projections along its axes of symmetry, centered on a face, an edge, and the two types of vertex, threefold and fourfold. The last two correspond to the B2 and A2 Coxeter planes.

Orthogonal projections
Projective
symmetry		 [4] [6] [2] [2]
Rhombic
dodecahedron
Cuboctahedron
(dual)

Cartesian coordinates

Pyritohedron variations between a cube and rhombic dodecahedron
Expansion of a rhombic dodecahedron

The eight vertices where three faces meet at their obtuse angles have Cartesian coordinates:

(±1, ±1, ±1)

The coordinates of the six vertices where four faces meet at their acute angles are:

(±2, 0, 0) , (0, ±2, 0) and (0, 0, ±2)

The rhombic dodecahedron can be seen as a degenerate limiting case of a pyritohedron, with permutation of coordinates (±1, ±1, ±1) and (0, 1+h, 1−h2) with parameter h=1.

Topologically equivalent forms

Parallelohedron

The rhombic dodecahedron is a parallelohedron, a space-filling polyhedron. Other symmetry constructions of the rhombic dodecahedron are also space-filling, and as parallelotopes they are similar to variations of space-filling truncated octahedra.[2]

For example, with 4 square faces, and 60-degree rhombic faces, and D4h dihedral symmetry.


Net

It can be seen as a cuboctahedron with square pyramids augmented on the top and bottom. It has coordinates:

(0, 0, ±2)
(±1, ±1, 0)
(±1, 0, ±1)
(0, ±1, ±1)

Trapezoidal dodecahedron

Example net (3/4,3/2)

Another topologically equivalent variation, sometimes called a trapezoidal dodecahedron, is isohedral with tetrahedral symmetry, distorting rhombic faces into kites. It has 8 vertices adjusted in or out in alternate sets of 4, with the limiting case a tetrahedral envelope. Variations can be parametrized by (a,b), where b is determined from a for planar faces. (1,1) is the rhombic solution. As (a) approaches 1/2, (b) approaches infinity.

(±2, 0, 0), (0, ±2, 0), (0, 0, ±2)
(a, a, a), (-a, -a, a), (-a, a, -a), (a, -a, -a)
(-b, -b, -b), (-b, b, b), (b, -b, b), (b, b, -b)
(1,1) (7/8,7/6) (3/4,3/2) (2/3,2) (5/8,5/2) (9/16,9/2)

Related polyhedra

Spherical rhombic dodecahedron

This polyhedron is a part of a sequence of rhombic polyhedra and tilings with [n,3] Coxeter group symmetry. The cube can be seen as a rhombic hexahedron where the rhombi are squares.

Symmetry mutations of dual quasiregular tilings: V(3.n)2
Spherical Euclidean Hyperbolic
*n32 *332 *432 *532 *632 *732 *832... *∞32
Tiling
Conf. V(3.3)2 V(3.4)2 V(3.5)2 V(3.6)2 V(3.7)2 V(3.8)2 V(3.∞)2

Similarly it relates to the infinite series of tilings with the face configurations V3.2n.3.2n, the first in the Euclidean plane, and the rest in the hyperbolic plane.


V3.4.3.4
(Drawn as a net)
V3.6.3.6
Euclidean plane tiling
Rhombille tiling
V3.8.3.8
Hyperbolic plane tiling
(Drawn in a Poincaré disk model)

Stellations

Like many convex polyhedra, the rhombic dodecahedron can be stellated by extending the faces or edges until they meet to form a new polyhedron. Several such stellations have been described by Dorman Luke.[3]

The first stellation, often simply called the stellated rhombic dodecahedron, is well known. It can be seen as a rhombic dodecahedron with each face augmented by attaching a rhombic-based pyramid to it, with a pyramid height such that the sides lie in the face planes of the neighbouring faces:

Luke describes four more stellations: the second and third stellations (expanding outwards), one formed by removing the second from the third, and another by adding the original rhombic dodecahedron back to the previous one.

Honeycomb

The rhombic dodecahedron can tessellate space by translational copies of itself. Interestingly, so can the stellated rhombic dodecahedron.

Related polytopes

In a perfect vertex-first projection two of the tesseract's vertices (marked in pale green) are projected exactly in the center of the rhombic dodecahedron

The rhombic dodecahedron forms the hull of the vertex-first projection of a tesseract to three dimensions. There are exactly two ways of decomposing a rhombic dodecahedron into four congruent parallelepipeds, giving eight possible parallelepipeds. The eight cells of the tesseract under this projection map precisely to these eight parallelepipeds.

The rhombic dodecahedron forms the maximal cross-section of a 24-cell, and also forms the hull of its vertex-first parallel projection into three dimensions. The rhombic dodecahedron can be decomposed into six congruent (but non-regular) square dipyramids meeting at a single vertex in the center; these form the images of six pairs of the 24-cell's octahedral cells. The remaining 12 octahedral cells project onto the faces of the rhombic dodecahedron. The non-regularity of these images are due to projective distortion; the facets of the 24-cell are regular octahedra in 4-space.

This decomposition gives an interesting method for constructing the rhombic dodecahedron: cut a cube into six congruent square pyramids, and attach them to the faces of a second cube. The triangular faces of each pair of adjacent pyramids lie on the same plane, and so merge into rhombuses. The 24-cell may also be constructed in an analogous way using two tesseracts.

See also

References

  1. ↑ Dodecahedral Crystal Habit. khulsey.com
  2. ↑ Order in Space: A design source book, Keith Critchlow, p.56-57
  3. ↑ Luke, D. (1957). "Stellations of the rhombic dodecahedron". The Mathematical Gazette 337: 189–194.

Further reading

External links

Computer models

Paper projects

Practical applications

This article is issued from Wikipedia - version of the Wednesday, March 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.