Tire iron

Not to be confused with lug wrench.

Typical set of three metal tire levers of the type used on bicycles

A tire iron (also tire lever or tire spoon) is a specialized metal tool used in working with tires. Tire irons have not been in common use for automobile tires since the shift to the use of tubeless tires in the late 1950s.

Bicycle tire irons are still in use for those tires which have a separate inner tube, and can have a hooked C-shape cut into one end of the iron so that it may be hooked on a bicycle spoke to hold it in place.

Description and use

Tire irons usually come in pairs, or threes, and are used to pry the edge of a tire away from the rim of the wheel it has been mounted on. After one iron has pried a portion of the tire from its wheel, it is held in position while a second iron is applied further along the tire to pry more of the tire away from the wheel. This allows enough of the tire to be separated so that the first iron can be removed, and used again on the far side of the other iron. Alternating in this way, a person can work all the way around the tire to fully remove it from the wheel, in order to reach the tube that sits inside.

Bicycle tire irons

Tire irons for bicycles are usually referred to as "tire levers", as they are often made of plastic, not metal.

Tire levers for bicycle tires have one end that is tapered and slightly curved. The other end is usually hooked so that it can be hooked around a spoke to keep the tire bead free of the rim at one point, allowing a second lever to be manipulated forward, progressively loosening a larger segment of the tire bead from the rim.^[1]

A common feature of tire levers is the lack of sharp edges. The slightest pinch of an inner tube by a lever can weaken or puncture the tube. It is good practice to examine a set of tire levers for any sharp edges and to file them smooth and round.

Classically, tire levers were made of metal. However plastic ones are now manufactured which are even less sharp and less likely to puncture the tube. There are also some single-lever varieties, which can be inserted under the bead at one point then quickly pushed around the rim to pop the bead off.^[2]

Tire levers are not necessary or desirable in all cases. In some cases, the tire can be reinserted on the rim, and sometimes removed from the rim, without the use of tire levers. This reduces the chance of puncture caused by pinching the tube between the rim and the tire bead. Sometimes they are used to fit the tire back on, but this can be done without the levers.

References

The Wikibook Bicycles has a page on the topic of: Fixing a flat

↑ Cuthbertson, Tom Anybody's Bike Book p.110 Ten Speed Press, 1979
↑ http://www.bicycling.com/gear/detail/0,7989,s1-21-141-1906-0,00.html

Hand tools

sawhorse toolbox workbench

adjustable spanner antique tools basin wrench block plane brace bradawl breaker bar card scraper cat's paw caulking gun clamp crowbar fish tape grease gun hammer hawk hex key impact driver jack locking pliers lug wrench mallet mitre box monkey wrench multi-tool nut driver paint roller paintbrush pincers pipe wrench pliers plumber wrench plumber's snake plunger podger spanner punch punch down tool putty knife scratch awl screwdriver sledgehammer socket wrench spike maul staple gun stitching awl strap wrench tire iron tongue-and-groove pliers torque wrench tweezers upholstery hammer wrench

Types of tools Cleaning Cutting and abrasive Forestry Garden Hand Machine and metalworking Measuring and alignment Power

Bicycle tools

Hub, wheel, and tire	Bicycle pump Cone wrench Spoke wrench Tire lever Wheel truing stand

Headset	Hex key

Drivetrain and bottom bracket	Chain tool Chain whip Peanut butter wrench

This article is issued from Wikipedia - version of the Wednesday, July 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Tire iron

Description and use

Bicycle tire irons

See also

References