WAGR E class (1879)

WAGR E class

E2 at Geraldton, 1886
Type and origin
Power type Steam
Builder Avonside Engine Company
Serial number 1239-1242
Build date 1879
Total produced 2
Specifications
Configuration 2-4-4-2
Gauge 3 ft 6 in (1,067 mm)
Driver diameter 3 ft 3 in (991 mm)
Loco weight 33 long tons 9 cwt (74,900 lb or 34 t)
Fuel type Coal
Fuel capacity 7 long tons 0 cwt (15,700 lb or 7.1 t)
Water cap 1,000 imp gal (4,500 l; 1,200 US gal)
Firebox:
  Firegrate area
13 sq ft (1.2 m2)
Boiler pressure 120 lbf/in2 (0.83 MPa)
Cylinder size 10 in × 18 in (254 mm × 457 mm)
Performance figures
Tractive effort 8,862 lbf (39.42 kN)
Factor of adh 6.5
Career
Operators Western Australian Government Railways
Numbers E20, E7
First run 1881
Withdrawn 1895
Disposition all scrapped

The WAGR E class was a two-member class of 2-4-4-2T double-Fairlie locomotives operated by the Western Australian Government Railways (WAGR) between 1881 and 1892.

History

The E class engines were built by Avonside Engine Co, Bristol in 1879 for the WAGR's Northampton railway line, the first government railway in Western Australia, which opened that year.

In line with Avonside's practice for assigning build numbers to Fairlie locomotives, each end received a separate serial number. However, after a collapse in the price of lead, the heavy mineral traffic for which they were purchased dried up and they were placed in store. One entered service in 1881, with the second remaining in store until 1885 when a M class had to be withdrawn for overhaul.[1][2] When engine class designations were introduced in 1885, they were became the E class, numbered E20 and E7.

In 1888, both were transferred to Fremantle Railway Workshops for use on the Eastern Railway. In 1891, E20 was cut up with the parts from one half with adapted to drive machinery at the Fremantle Railway Workshops, the other half was converted into a 2-4-2T tank engine as F20 in February 1893 for use at Fremantle Long Jetty. It was sold in February 1899 to Jarrah Timber & Wood Paving, Worsley and withdrawn by March 1905.[3]

E7 was withdrawn in 1895 and sold to the Canning Jarrah Timber Company for use on the Upper Darling Range Railway.[4] It was scrapped in 1897.[5]

Namesakes

The E class designation was reused for the E class locomotives that were introduced in 1902. It was reused again in the 1960s when an E class diesel locomotive was acquired.

See also

References

Notes

  1. Gunsburg 1984, p. 17.
  2. Oberg, Leon (2010). Locomotives of Australia 1850s-2010. Dural: Rosenberg Publishing. pp. 48–49. ISBN 9781921719011.
  3. Gunsburg 1984, p. 44.
  4. Gunsburg 1984, p. 18.
  5. Watson, Lindsay (1995). The Railway History of Midland Junction: Commemorating The Centenary Of Midland Junction, 1895-1995. L&S Drafting. p. 111. ISBN 0 646 24461 2.

Cited works

  • Gunzburg, Adrian (1984). A History of WAGR Steam Locomotives. Perth: Australian Railway Historical Society (Western Australian Division). ISBN 0959969039. 

External links

Media related to WAGR E class (1879) at Wikimedia Commons

This article is issued from Wikipedia - version of the Tuesday, December 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.