Athena (rocket family)

Athena

Athena II with Lunar Prospector
Function Small, modular component launch vehicle
Manufacturer Lockheed Martin
Alliant Techsystems
Country of origin United States
Size
Height 19.8 - 30.48 m (65 - 100 ft)
Diameter 2.36 m (92 in)
Mass 66,344 - 120,202 kg (146,264 - 265,000 lb)
Stages 2 or 3
Capacity
Payload to LEO 794 - 1,896 kg (1,750 - 4,350 lb)
Launch history
Status Retired,[1]
To be reactivated[2]
Launch sites Cape Canaveral Air Force Station Launch Complex 46,
Vandenberg AFB Space Launch Complex 6,
Kodiak Launch Complex 1
Total launches 7
For breakdown by variant, see text.
Launch data.[3]
Successes 5
Failures 2
First flight August 1995
Notable payloads Lunar Prospector
First stage - Castor-120
Engines 1
Thrust 1,900 kN (435,000 lbf)
Specific impulse 280 seconds
Burn time 83.4 seconds
Fuel Class 1.3 Hydroxyl-terminated polybutadiene (HTPB-a polymer) propellant
Second stage - ORBUS 21D
Engines 1
Thrust 194 kN (43,723 lbf)
Specific impulse 293 seconds
Burn time 150 seconds
Fuel Class 1.3 Hydroxyl-terminated polybutadiene (HTPB-a polymer) propellant

Athena was a 1990s Lockheed Martin expendable launch system which underwent several name changes in its lifetime.

Development began at the Lockheed Corporation in 1993, where the design was known as the Lockheed Launch Vehicle. The name was subsequently changed to the Lockheed Martin Launch Vehicle when Lockheed merged with Martin Marietta. Late in the program's life the name was finally changed to Athena, and all of the launches after the demonstration flight in August 1995 were conducted using that name. Athena was retired from service in 2001, however in 2010 it was announced that it would be put back into production, with launches set to resume in 2012.[2] In September 2010 Athena was added to NASA's Launch Services II contract.

Variants

Main articles: Athena I and Athena II

The Athena comes in two versions, Athena I and Athena II. The Athena I has two stages, the Thiokol Castor-120 first stage and a Pratt & Whitney ORBUS 21D upper stage, both powered by solid-fuel. The Athena II has three stages, the Castor-120 first and second stages, and an ORBUS 21D upper stage. When flights resume in 2012, the Athena Ic and Athena IIc configurations will use Castor 30 stages instead of the Orbus 21D stages on the original versions.[2]

The Athena rocket uses an Orbit Adjust Module (OAM) developed by Primex Technologies. Primex was acquired by General Dynamics in 2001.[4][5] For the September 28th, 2001 Athena launch, the OAM was built by General Dynamics Space Propulsion Systems of Redmond, WA.[6] The OAM houses the attitude control system and avionics subsystem (guidance and navigation, batteries, telemetry transmitters, command and destruct receivers and antennas). This 1 meter (3.3 feet) long module is fueled with monopropellant hydrazine. After payload separation, the OAM performs a contamination and collision avoidance maneuver, distancing itself from the payload and burning any remaining fuel to depletion. Athena solid rocket motor provider ATK produces integrated upper stages using spin-stabilized or 3-axis stabilized Star solid motors that can provide higher velocities for GEO and escape (e.g. lunar and planetary) missions.[7] Such an integrated upper stage based on a 2531 lb Star 37FM was employed for the launch of Lunar Prospector, the first lunar probe launched by a commercially developed launch vehicle.

Athena III

1990s proposal

An Athena III rocket was originally planned and designated the LLV-3 in the 1990s according to the original patent. It was never developed, because of the lack of customer interest. It was to add two, four or six Castor-4A strap-on boosters to the first stage of the stack, and would have been capable of launching 3.6 tons to low Earth orbit.[8]

PlanetSpace proposal

The designation was later reused for a proposed rocket for the Commercial Orbital Transportation Services project. Sometime after 2005, PlanetSpace reused the Athena III designation for a 2.8-million-pound-thrust shuttle-derived space station resupply booster rocket, in a joint venture with Lockheed Martin and Alliant Techsystems (ATK). As of March 2012, Lockheed Martin selected Alaska's Kodiak Launch Complex (KLC) as its dedicated West Coast launch facility for Athena rockets, clearing the way for Alaska Aerospace Corporation to begin expanding the facilities. Lockheed Martin will be finalizing its plans as to whether or not to proceed with Athena III in the next few months. Athena III was to feature a 2 1/2 segment Space Shuttle Solid Rocket Booster (SRB) derived reusable solid rocket booster (RSRB) first stage topped by a Castor 120, Castor 30 and OAMS orbit adjust module. Athena III will be capable of placing a 4,600 kg (10,100 lb) satellite in polar orbit from Kodiak or launch a 5,900 kg (13,000 lb) satellite into orbit with a due east launch from the East Coast. (An East Coast launch site has not been selected.) Kodiak was selected over heavily-booked Vandenberg to avoid delays in high-priority rapid-response launches for the U.S. military.[9]

Launches

Athena 1 rocket launching from Kodiak Island in Alaska (September 30, 2001)

List of launches

Flight number Date (UTC) Vehicle type Launch Site Payload Result Remarks
1 August 15, 1995
22:30
Athena-1 (DLV) VAFB SLC-6 Gemstar 1 (VitaSat 1) (113 kg) Failure
2 August 23, 1997
06:51
Athena-1 (LM-002) VAFB SLC-6 Lewis (404 kg) Success payload failed after 3 days in orbit
3 January 7, 1998
02:28
Athena-2 (LM-004) CCAFS SLC-46 Lunar Prospector (295 kg) Success
4 January 27, 1999
00:34
Athena-1 (LM-006) CCAFS SLC-46 Chunghua 1 (ROCSAT 1, Formosat-1), (410 kg) Success
5 April 27, 1999
18:22
Athena-2 (LM-005) VAFB SLC-6 Ikonos-1 (726 kg) Failure
6 September 24, 1999
18:21
Athena-2 (LM-007) VAFB SLC-6 Ikonos-2 (726 kg) Success
7 September 30, 2001
02:40
Athena-1 (LM-001) KLC LC-1 Starshine 3 (90 kg), PicoSAT (68 kg), PCSat (10 kg), SAPPHIRE (18 kg) Success Kodiak Launch Complex's first orbital launch.[10]

Launch failures

Gemstar 1 (VitaSat 1) launch failure

On August 15, 1995, an Athena-1 rocket (vehicle DLV), failed during launch. Expended hydraulic fluid burned in first stage aft section, damaging nozzle feedback cables causing loss of gimbal control and tumbling. Separately, arcing in the IMU high-voltage power supply caused loss of attitude reference. Flight terminated by range safety officer at T+160 s.[11]

IKONOS-1 launch failure

On April 27, 1999, an Athena-2 rocket (vehicle LM-005), failed during launch. Payload fairing failed to separate, and the extra weight prevented the vehicle from reaching orbit. During the fairing separation event, the shock of the circumferential ordnance firing disconnected the cable carrying the signal to fire the longitudinal ordnance.[11]

References

  1. "Athena-1". Astronautix.
  2. 1 2 3 Clark, Stephen (25 March 2010). "Athena rocket reborn under aerospace industry alliance". Spaceflight Now. Archived from the original on 29 March 2010. Retrieved 25 March 2010.
  3. "Peacekeeper". Encyclopedia Astronautica.
  4. "General Dynamics to Acquire Primex Technologies, Inc." (Press release). General Dynamics. November 9, 2000.
  5. "Primex Technologies, Inc. Shareholders Approve Acquisition by General Dynamics" (Press release). GD. January 24, 2001. Archived November 20, 2008 at the Wayback Machine
  6. "Lockheed Martin Athena I Launch Vehicle Successfully Completes First Launch From Alaska's Kodiak Launch Complex" (Press release). LM. September 28, 2001.
  7. ATK Space Propulsion Products Catalog, May 2008, p. 93
  8. Day, Dwayne. "Athena rising?". Retrieved 28 March 2013.
  9. Lockheed Martin Connecting with Kodiak, Satnews Daily, March 05, 2012
  10. NASA: Kodiak Star 2001
  11. 1 2 International reference guide to space launch systems, Fourth Edition, p. 50, ISBN 1-56347-591-X
This article is issued from Wikipedia - version of the Sunday, January 24, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.