Rapid transit operations of the BRT and BMT

Brooklyn Union Elevated Railroad
New York Consolidated Railroad
New York Rapid Transit Corporation
Locale New York City
Dates of operation 1899 1907 (B'klyn Heights RR)
1907 1912 (B'klyn Union El. RR)
1912 1923 (NY Consol. RR)
19231940 (NYRT Corp.)
Track gauge 4 ft 8 12 in (1,435 mm) standard gauge
Headquarters Brooklyn, NY

Starting in 1899, the Brooklyn Rapid Transit Company (BRT; 1896–1923) and Brooklyn–Manhattan Transit Corporation (BMT; 1923–1940) operated rapid transit lines in New York City — at first only elevated railways and later also subways.

Until 1907, these lines were leased to the Brooklyn Heights Railroad, which also operated the BRT's surface transit lines. In 1907, the lease of the Brooklyn Union Elevated Railroad was canceled, and this company began to operate most of the rapid transit lines. A new company, the New York Consolidated Railroad, was formed in 1912 as the rapid transit operating subsidiary, and that same year the New York Municipal Railway was formed to enter into Contract 4 of the Dual Contracts with the city, under which the BRT gained subways and elevated extensions.

In 1923, as part of the reorganization of the BRT into the BMT, the two companies were merged to form the New York Rapid Transit Corporation; the Brooklyn and Queens Transit Corporation was similarly formed in 1929 as the surface transit subsidiary. When the New York City Board of Transportation took over the BMT in 1940, the company ceased to operate.

BRT (1899–1923)

The Brooklyn Union Elevated Railroad was incorporated on January 30, 1899, and acquired the property of the bankrupt Brooklyn Elevated Railroad on February 17. The BRT gained control a month later, on March 25,[1] and leased the elevated company to the Brooklyn Heights Railroad, until then solely a street railway company, on April 1. The other elevated company in Brooklyn, the Kings County Elevated Railway, was sold under foreclosure to the BRT on July 6, 1899,[2] and reorganized on August 1 as the Kings County Elevated Railroad.

The first step in simplifying the corporate structure was made in 1900, when the Sea View Railroad (Brighton Beach Line) was merged into the Kings County Elevated (on May 9) and the Kings County Elevated was then merged into the Brooklyn Union Elevated (on May 24). The lease to the Brooklyn Heights was canceled effective March 1, 1907, after which the Brooklyn Union Elevated operated itself. At the same time, the lease of the ground-level Canarsie Railroad, which was run as part of the elevated system, was transferred to the Brooklyn Union Elevated. The Sea Beach Railway (Sea Beach Line) and South Brooklyn Railway (Culver Line), which had been operated by the Brooklyn Heights as part of its elevated system, were released for independent operation.[3]

Thus, as of March 1907, the following lines were operated with elevated trains:

Brooklyn Union Elevated Railroad
Nassau Electric Railroad
Sea Beach Railway
South Brooklyn Railway

The Sea Beach Railway was soon leased by the Brooklyn Union Elevated, but the other two lines — the Culver and the West End — continued to be operated separately. On November 30, 1912, the Brooklyn Union Elevated Railroad, Canarsie Railroad, and Sea Beach Railway merged to form the New York Consolidated Railroad.

The New York Municipal Railway was incorporated on September 27, 1912,[4] in order to lease the BRT lines built by the city under Contract 4 of the Dual Contracts. This lease was made for 49 years from January 1, 1917. Under the terms of the contract, the two systems were to be operated as one, and the city had the right of recapture, under which it could take back the lines it owned for city operation after ten years.[5] Contract 4 elevated lines were completed above the West End tracks in 1917 and the Culver tracks in 1920, ending elevated operations on the surface. Despite being leased to the New York Municipal Railway, all the new lines were operated by the elevated company - the New York Consolidated Railroad.[6]

The following construction was done under Contract 4:[7][8]

The following construction was done at the New York Municipal Railway's own expense:[7]

BMT (1923–1940)

The New York Consolidated Railroad and New York Municipal Railway were merged in June 1923, the same month that the Brooklyn Rapid Transit Company was reorganized as the Brooklyn–Manhattan Transit Corporation, to form the New York Rapid Transit Corporation.The remaining Contract 4 lines were soon completed. On June 1, 1940, the New York City Board of Transportation took over operations.[9]

BMT services were assigned numbers in 1924, which appeared only on the fronts of trains and in schedules. In 1960, the New York City Transit Authority brought the BMT into the IND letter system, and most services were reassigned as letters. Since then, many changes have been made; see the individual articles about the letters for more detail, and New York City Subway nomenclature for more general information.[9]

Terminals shown in the table below are pre-letters. This chart shows the letter code assigned to each BMT service in 1960; important changes happened on a few lines between then and when the letters were first publicly used. While the BMT number code was officially retired in the 1960s, two of these markers would continue to appear on equipment until as late as the early 1980s. For instance the BMT 7 marker appeared on Franklin Avenue Shuttle trains as late as 1982.[10][11]

1939 service Notes
BMT Southern Division
1QBrighton Beach LineQueensboro Plaza – Stillwell Avenue (local via Tunnel)
57th Street – Stillwell Avenue (local via Bridge)
Times Square – Brighton Beach (express via Bridge)
2RFourth Avenue LineQueensboro Plaza – 95th Street (local via Tunnel)
3TWest End LineTimes Square – Stillwell Avenue (express via Bridge)
Chambers Street – Bay Parkway (local loop service via Nassau Street)
4NSea Beach LineTimes Square – Stillwell Avenue (express via Bridge)
5SSCulver LineChambers Street – Stillwell Avenue (local via Tunnel)
Sands Street – Stillwell Avenue (local via Fifth Avenue Elevated)
truncated on October 30, 1954
6Fifth Avenue – Bay Ridge LineSands Street – 65th Street (local)closed May 31, 1940
7SSBrighton–Franklin LineFranklin Avenue – Prospect Park (local)shuttle
BMT Queens Division
8Astoria LineQueensboro Plaza – Ditmars Avenue (local)became the "other end" for service labels in fall 1949
97Flushing LineQueensboro Plaza – Main Street (local)formerly known as Corona Line
became IRT—only in fall 1949
also known as World's Fair – Flushing Line
BMT Eastern Division
10MMyrtle Avenue – Chambers Street LineChambers Street – Metropolitan Avenue (local)
11MJMyrtle Avenue LineSands Street – Metropolitan Avenue (local)closed October 4, 1969
12Lexington Avenue LinePark Row – Eastern Parkway (local)closed October 13, 1950
13Fulton Street LinePark Row – Lefferts Avenue (local)part west of Rockaway Avenue closed May 31, 1940; part west of Grant Avenue closed April 26, 1956, remainder became part of the IND April 29, 1956
14KBroadway (Brooklyn) LineCanal Street – Rockaway Parkway (local)formerly known as Canarsie Line before 16 was finished on July 14, 1928
15JJamaica LineBroad Street – 168th Street (local)
16L14th Street-Canarsie LineEighth Avenue – Rockaway Parkway (local)formerly known as 14th Street – Eastern Line until July 14, 1928

Divisions

The BMT's predecessor BRT organized the rapid transit lines into two divisions, the Eastern Division and the Southern Division. When BMT service began on the Corona and Astoria Lines in 1923, a Queens Division was added. When the dual-operated Queens lines were divided between the BMT and IRT in 1949, the Queens Division was dissolved.

All the lines running to southern Brooklyn, including the Brighton–Franklin Line plus the Broadway Line as far as Queensboro Plaza and the BMT Nassau Street Line as far as Chambers Street constitute the Southern Division. All the rest of the system are the Eastern Division except the Astoria and Flushing Lines, which were the Queens Division. The Astoria Line has been part of the Southern Division since 1949, and the Flushing is no longer a BMT Line.

The divisions maintained separate car fleets and maintenance bases, to the extent that some types of cars were assigned only to one division or the other, and common equipment, such as the BMT Standards, were nevertheless divided by car number between the divisions.

Equipment Introduced Code Division Notes
Gate cars to 1910 BU All Blocks of cars assigned to all three
Standards 1915-24 AB East / South Blocks of car assigned to Eastern and Southern
C-types 1923 C Eastern Converted from gate cars
Triplex 1925-27 D Southern  
Multi-Section 1936 MS Eastern  
World's Fair 1939 Q Queens Converted from gate cars
R16 1953 R16 Eastern Under NYCTA
R27/30 1960-61 R27/R30 Southern Under NYCTA
Brightliners 1964-65 R32 Southern Under NYCTA

The distinction between Eastern and Southern BMT Divisions continues to date, partly for operational and maintenance reasons, and partly because the Eastern Division is limited to the shorter 60-foot cars. When the Chrystie Street Connection joined the IND and BMT operationally in 1967, it did not change the Division boundaries, but it did break the strict assignment of types of car to one division or another.

Prior to Chrystie Street, operation of a service on both divisions was exceedingly rare, until the QJ and RJ services were introduced in 1967. There were some instances of joint trackage, mainly on the Nassau Street Line and approaching Brooklyn Bridge. Currently, there is no service operating on both divisions.

When the BMT introduced line numbers in 1924, it divided them by division: 1 to 4, the Southern Division subway services, 5, 6 and 7, the Southern Division elevated services, 8 and 9 to the Queens Division and 10 to 16, the Eastern Division services.

In 1940, with City ownership, the Divisions were officially restyled as "Sections" to avoid having Divisions of Divisions: i.e., "BMT Division, Eastern Section" but they are usually still referred to as "Divisions" to the present.

After 1940

Current BMT lines in Manhattan are exclusively subway. Its Brooklyn lines include one long subway line, the Fourth Avenue Line, and one subway connector, hooking the pre-existing Brighton Beach Line to the main subway at a large flying junction at DeKalb and Flatbush Avenues. The remaining Brooklyn lines are on elevated structures, in open cuts or on embankments, or on short portions of surface trackage. Several Brooklyn lines extend into Queens, and these are elevated, except for the final station on the Myrtle Avenue Line, which in an embankment, and the BMT Archer Avenue Line, a stub line which opened in 1989, with IND services operating above it. The BMT's only line in Queens which comes directly from Manhattan, the BMT Astoria Line, is entirely elevated.

References

Wikimedia Commons has media related to Brooklyn-Manhattan Transit Corporation.
This article is issued from Wikipedia - version of the Saturday, January 23, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.