Bullpup

Not to be confused with Buhl Bull Pup or AGM-12 Bullpup.
SVU-AS, a bullpup rifle with the action located behind the trigger.
SVDS, a conventionally configured rifle using the same action.

A bullpup is a firearm with its action behind its trigger group. This configuration permits a shorter overall weapon for a given barrel length. This maintains the advantages of a longer barrel in muzzle velocity and accuracy, while improving maneuverability and reducing weight.

The origin of the term "bullpup" for this configuration is unclear. In 1957, the word was reported to denote a target pistol, particularly one with a fancy stock.

Description

The bullpup design places the gun's action behind the trigger, usually in front of a short buttstock. The entire magazine is often also located behind the trigger group, though it is only necessary for the weapon's feed location to be located there for it to be classified as a bullpup; in some designs such as the Heckler & Koch G11 and Neostead the magazine or magazines extend forward rather than downward.

The configuration decreases the firearm's length and weight while retaining the same barrel length. Bullpups generally allow for a 25% reduction in weapon length, which allows for better maneuverability in confined spaces.

An often cited shortcoming of the bullpup configuration is spent casings being ejected into the face of a left-handed shooter, preventing effective use. This is solved on some designs with ejection downward (FN P90), forward (FN F2000, Kel-Tec RFB), or use of caseless ammunition (Heckler & Koch G11, with a failed round manually ejected downward).

Being held closer to the body, a bullpup causes less arm fatigue and allows faster reaction time from a lowered position. However, its rear-weighted design lacks balance, inducing muzzle rise and inaccurate automatic fire. In addition, shorter weapon length results in a shorter sight radius, further impairing accuracy at distance, as well as reducing bayonet effectiveness in close. Also, due to the forward assembly and the necessary trigger linkage, bullpup trigger pull characteristics are often criticized.

History

The L85A1 GP rifle, variant of the SA80 series of weapons.
The FN P90 uses the bullpup layout in conjunction with a unique top-mounted feeding system, making it the most compact submachine gun with a fixed buttstock

The concept was first used in bolt action rifles such as the Thorneycroft carbine of 1901, although the increased distance from hand grip to bolt handle meant the decreased length had to be weighed against the increased time required to fire. It is known to have been applied to semi-automatic firearms in 1918 (6.5 mm French Faucon-Meunier semi-automatic rifle developed by Lt. Col. Armand-Frédéric Faucon), then in 1936 a bullpup machine pistol was patented by the Frenchman Henri Delacre.

After World War II, Western engineers drew inspiration from the German Sturmgewehr 44 assault rifle, which offered a compromise between bolt-action rifles and submachine guns. Among them, Kazimierz Januszewski (also known as Stefan Janson), a Polish engineer who had worked at the Polish national arsenal during the 1930s. After being mobilized during World War II he escaped German and Russian forces and made his way to England, where he was a part of the "Polish design team" at Enfield Lock's Royal Small Arms Factory. The factory was run by lieutenant colonel Edward Kent-Lemon. As Januszewski was developing a new rifle, the "Ideal Calibre Board" was searching for a replacement for the .303 cartridge. The Board decided on an optimal 7 mm cartridge on which Januszewski and the two teams working at Enfield had to base their designs. One design team led by Stanley Thorpe produced a gas-powered rifle with a locking system based on the Sturmgewehr. The design used steel pressings which were difficult to obtain, and the design was scrapped. The result of the Polish design team's efforts was the EM-2, which broke significant new ground.

The EM-2 contained some similarities to the Soviet AK-47, although Januszewski had never seen the Soviet rifle. The first significant bullpup assault rifle came from the British program to replace the service pistols, sub-machine guns, and rifles. In the two forms of the EM-1 and the EM-2, the new rifle concept was born as a result of the experience with small arms that was gained during the Second World War. It was obvious that the modern warfare would require the infantry to be armed with a light, selective fire weapon, with effective range of fire much longer than that of a submachine gun, but shorter than that of conventional semi-automatic or bolt action rifles. The bullpup design was seen as a necessity to retain the accuracy at range while reducing overall length. The EM-2 was adopted by the U.K. in 1951 as the world's first (limited) service bullpup rifle, but was promptly displaced by the adoption of the 7.62×51mm NATO (0.308 in) cartridge, to which the EM-2 was not easily adapted. The decision was rescinded and a variant of the more conventional FN FAL was adopted in its place.

A 7.62×39mm M43 calibre experimental assault rifle was developed by German A. Korobov in the Soviet Union around 1945, and a further development, the TKB-408 was entered for the 1946–47 assault rifle trials by the Soviet Army, although it was rejected in favour of the more conventional AK-47. The United States briefly experimented in the same year with the integrally-scoped Model 45A bullpup, which never progressed beyond the prototype stage; John Garand designed his T31 bullpup, abandoned after his retirement in 1953.

After these failures of the bullpup design to achieve widespread service, the concept continued to be explored (for example: a second Korobov bullpup, the TKB-022PM).

Adoption

The Steyr AUG was one of the first bullpup rifles to enter widespread use.
FAMAS rifle.
The SAR 21 with the attached Round Corner Firing (RCF) module
Peruvian Naval Infantry armed with FN F2000s
Soldier of the IDF's Caracal Battalion armed with Tavor TAR-21 equipped with a Meprolight MEPRO 21 reflex sight

The Steyr AUG (selected in 1977) is often cited as the first successful bullpup, being in service with the armed forces of over twenty countries, and becoming the primary rifle of Austria and Australia. It was highly advanced for the 1970s, combining in the same weapon the bullpup configuration, a polymer housing, dual vertical grips, an optical sight as standard, and a modular design. Highly reliable, light, and accurate, the Steyr AUG showed clearly the potential of the bullpup layout. The arrival of the FAMAS in 1978, and its adoption by France emphasized the slide from traditional to bullpup layouts within gun designs.

The British resumed their bullpup experiments with the L85, which entered service in 1985. Following persistent reliability problems, it was redesigned by the then British-owned Heckler & Koch into the L85A2, and it is now a reliable, if heavy, weapon.

The Singaporean SAR 21 addressed one flaw of bullpup rifles by using a stiff sliding plate to improve the quality of trigger pull, and by using a shell deflector to achieve a slightly ambidextrous weapon. Having learned from extensive combat experience, Israel Military Industries developed a bullpup rifle: the Tavor TAR-21. The Tavor is light, accurate, fully ambidextrous and reliable (designed to stringent reliability standards to avoid malfunctioning in desert conditions), and is in increasing demand in other countries, notably India. The Tavor shares many similarities with the SAR 21 and the South African Vektor CR-21. Other bullpups have been recently adopted by the Islamic Republic of Iran Army and the Chinese People's Liberation Army: the KH-2002 and the QBZ-95 respectively.

Some sniper rifles such as the American Barrett M95 and XM500, German Walther WA 2000 and DSR-1, Chinese QBU-88, Russian SVU, and Polish Bor use the bullpup layout. It is also used for combat shotgun designs such as the Neostead and Kel-Tec KSG.

Bullpups adopted for current standard issue by various armed forces:

In contrast, special operations forces in nations that have formally adopted bullpup designs for their standing army (for example, the SOCOMD of Australia, United Kingdom Special Forces, and COS of France) have been known to utilize conventional modular rifles, usually of the AR-15 platform (e.g., the M4 carbine, Colt Canada C7, C8, SIG SG 550 and its variants, or the Heckler & Koch G36).

See also

References

    Bibliography

    External links


    This article is issued from Wikipedia - version of the Sunday, April 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.