Decaffeination

Decaffeination is the removal of caffeine from coffee beans, cocoa, tea leaves and other caffeine-containing materials. While soft drinks which do not use caffeine as an ingredient are sometimes described as "decaffeinated", they are better termed "non-caffeinated" because decaffeinated implies that there was caffeine present at one point in time. Decaffeinated drinks contain typically 1–2% of the original caffeine content, and sometimes as much as 20%.^[1] Decaffeinated products are commonly termed decaf.

History

Coffee

Friedlieb Ferdinand Runge performed the first isolation of pure caffeine from coffee beans in 1820. He did this after the Poet Goethe requested he perform an analysis on coffee beans after seeing his work with belladonna extract.^[2] Though Runge was able to isolate the compound, he didn’t learn much as to the chemistry of caffeine itself, nor did he seek to use the process commercially to produce decaffeinated coffee.

The first commercially successful decaffeination process was invented by German merchant Ludwig Roselius and co-workers in 1903 and patented in 1906.^[3][4] In 1903, Ludwig accidentally stumbled upon this method when his freight of coffee beans was soaked in sea water and lost much of its caffeine without losing much taste.^[5] This original decaffeination process involved steaming coffee beans with various acids or bases, then using benzene as a solvent to remove the caffeine.^[6] Coffee decaffeinated this way was sold as Kaffee HAG after the company name Kaffee Handels-Aktien-Gesellschaft (Coffee Trading Company) in most of Europe, as Café Sanka in France and later as Sanka brand coffee in the U.S.. Café HAG and Sanka are now worldwide brands of Kraft Foods. Due to health concerns regarding benzene (which is recognised today as a proven carcinogen^[7]), benzene is no longer used as a solvent commercially.

Since its inception, methods of decaffeination similar to those first developed by Roslius have continued to dominate. While Roselius used Benzene, many different solvents have since been tried after learning of the potential harmful effects of Benzene. The most prevalent solvents used to date are Dichloromethane and Ethyl Acetate, which are still used largely today.^[8]

Another variation of Roselius’s method is the indirect organic solvent method. This is very similar to the process described above, only instead of treating the beans directly, water resulting from the soaking of beans is treated with solvents and the process goes on until equilibrium is reached without caffeine in the beans. This method was first mentioned in 1941, and people have made great efforts to make the process more “natural’ and a true water-based process by finding ways to process the caffeine out of the water in ways that circumvents the use of organic solvents.^[9]

Another process, known as the Swiss Water Method, uses solely water and osmosis to decaffeinate beans. The use of water as the solvent to decaffeinate coffee was originally pioneered in Switzerland in 1933 and developed as a commercially viable method of decaffeination by Coffex S.A. in 1980.^[3] In 1988, the Swiss Water Method was introduced by The Swiss Water Decaffeinated Coffee Company of Burnaby, British Columbia, Canada.^[10]

Most recently, food scientists have turned to supercritical carbon dioxide as a means of decaffeination. Developed by Kurt Zosel, a scientist of the Max Plank Institute, it uses liquid CO₂ to extract caffeine^[3] and could be useful going forward because it circumvents the use of other solvents and their possible effects entirely.

Decaffeination processes for coffee

In the case of coffee, various methods can be used. The process is performed on unroasted (green) beans and starts with steaming of the beans. They are then rinsed with a solvent that extracts the caffeine while leaving other constituents largely unaffected. The process is repeated from 8 to 12 times until the caffeine content meets the required standard (97% of caffeine removed according to the international standard, or 99.9% caffeine-free by mass per the EU standard).

Common characteristics of decaffeination

In all decaffeination processes, coffee is always decaffeinated in its green, unroasted state. The greatest challenge to the decaffeination process is to try to separate only the caffeine from the coffee beans while leaving the other chemicals such as sucrose, cellulose, proteins, citric acid, tartaric acid, and formic acid at their original concentrations. This is not an easy task considering coffee contains somewhere around 1,000 chemicals that contribute to the taste and aroma.^[3] Since caffeine is a polar, water-soluble substance, water is used in all forms of decaffeination. However, water alone is not the best solution for decaffeination because it is not a selective solvent and therefore removes other soluble substances, including sugars and proteins, as well as caffeine. Therefore all decaffeination processes use a decaffeinating agent such as methylene chloride, activated charcoal, CO₂, or ethyl acetate.^[3] These agents help speed up the process and minimize the “washed-out” effects that water alone would have on the taste of decaf coffee.^[3]

Swiss Water process

This method is different in that it does not directly or indirectly add chemicals to extract the caffeine. Rather, it relies entirely on two concepts - solubility and osmosis - to decaffeinate coffee beans.^[3] The process begins by immersing a batch of green coffee beans in very hot water in order to dissolve and extract the caffeine. The water is then drawn off and passed through an activated charcoal filter. The porosity of this filter is sized to only capture larger caffeine molecules, while allowing smaller oil and flavor molecules to pass through it. However, this extraction process will also extract desirable oils and other solids from the beans, resulting in beans with no caffeine and no flavor in one tank, and caffeine-free but with flavor water in another tank.^[3] The Swiss Water process method attempts to overcome this difficulty by first discarding the flavorless caffeine-free beans, and then reusing the flavor-rich water to remove the caffeine from a fresh batch of coffee beans.^[3] Water saturated in this way is referred to as green coffee extract or GCE. It is created using a separate batch of green coffee beans, which are immersed in water and then discarded. In a pre-loading tank, water, cane sugar and formic acid are mixed and heated and used to preload carbon filter columns. The GCE is then filtered over the columns to extract caffeine from it. A fresh batch of green coffee beans is then immersed in the GCE to remove caffeine but retain other components. The other components can be retained because the water is already saturated with flavor ingredients, therefore, the flavors in this fresh bath cannot dissolve - only caffeine moves from the coffee beans to the water.^[3] This results in decaffeination without a massive loss of flavor. The process of filtering the GCE to remove caffeine and immersing the beans is repeated until the beans are 99.9% caffeine free by mass, meeting the required standard. This process takes 8 to 10 hours. ^[11]

Alternate link to Patent Citation

Organic solvent processes

Solvents used in decaffeination

Given numerous health scares connected to early efforts in decaffeination using solvents includes such as benzene, trichloroethylene, dichloromethane and even chloroform, the solvents of choice have become dichloromethane and ethyl acetate.^[3] Dichloromethane is able to extract the caffeine selectively and has a low boiling point. Although it is a solvent, its use as a decaffeination agent is not considered a health risk. In fact the Food and Drug Administration has determined any potential health risk is so low “as to be essentially non-existent”.^[3] While the FDA regulation allows up to ten parts per million (ppm) residual dichloromethane, actual coffee industry practice result in levels closer to one part per million.^[3] Although it is probable that traces of the solvent remain in the decaffeinated beans, it seems very unlikely that dichloromethane would survive the roasting process. Dichloromethane is highly volatile and vaporizes at 104 °F (40 °C) and coffee is roasted at a minimum of 400 °F (204 °C) for at least 15 minutes.^[3] Ethyl acetate is known to be more natural than other chemicals and safer than dichloromethane because it exists in several natural products and contributes to the characteristic aroma of many fruit.^[12] Ethyl acetate is also found in varying concentrations in foodstuffs including green and roasted coffee. Because ethyl acetate occurs in nature, coffee beans decaffeinated with this method are often labeled as “naturally” decaffeinated.

Direct method

In the direct method, the coffee beans are first steamed for 30 minutes to open their pores and then repeatedly rinsed with either dichloromethane or ethyl acetate for about 10 hours to remove the caffeine. The caffeine-laden solvent is then drained away and the beans steamed for an additional 10 hours to remove residual solvent.^[13] Sometimes coffees that are decaffeinated using ethyl acetate are referred to as naturally processed because ethyl acetate can be derived from various fruits or vegetables, but because of the impracticality of gathering natural ethyl acetate, the ethyl acetate used for decaffeination is synthetic.

Indirect method

In the indirect method, beans are first soaked in hot water for several hours, in essence making a strong pot of coffee. Then the beans are removed and either dichloromethane or ethyl acetate is used to extract the caffeine from the water. As in other methods, the caffeine can then be separated from the organic solvent by simple evaporation. The same water is recycled through this two-step process with new batches of beans. An equilibrium is reached after several cycles, wherein the water and the beans have a similar composition except for the caffeine. After this point, the caffeine is the only material removed from the beans, so no coffee strength or other flavorings are lost.^[14] Because water is used in the initial phase of this process, indirect method decaffeination is sometimes referred to as "water-processed".

CO₂ process

This process has been referred to as CO₂ Method, Liquid Carbon Dioxide Method, and Supercritical Carbon Dioxide method but it is technically known as supercritical fluid extraction.

The supercritical CO₂ acts selectively on the caffeine, releasing the alkaloid and nothing else. Water-soaked coffee beans are placed in an extraction vessel. The extractor is then sealed and supercritical CO₂ is forced into the coffee at pressures of 1,000 pounds per square inch to extract the caffeine.^[3] The CO₂ acts as the solvent to dissolve and draw the caffeine from the coffee beans, leaving the larger-molecule flavor components behind. The caffeine-laden CO₂ is then transferred to another container called the absorption chamber where the pressure is released and the CO₂ returns to its gaseous state and evaporates, leaving the caffeine behind.^[3] The caffeine is removed from the CO₂ using charcoal filters, and the caffeine free CO₂ is pumped back into a pressurized container for reuse on another batch of beans.^[15] This process has the advantage that it avoids the use of potentially harmful substances. Because of its cost, this process is primarily used to decaffeinate large quantities of commercial-grade, less-exotic coffee found in grocery stores.^[3]

Triglyceride process

Green coffee beans are soaked in a hot water/coffee solution to draw the caffeine to the surface of the beans. Next, the beans are transferred to another container and immersed in coffee oils that were obtained from spent coffee grounds and let to soak

After several hours of high temperatures, the triglycerides in the oils remove the caffeine, but not the flavor elements, from the beans. The beans are separated from the oils and dried. The caffeine is removed from the oils, which are reused to decaffeinate another batch of beans. This is a direct-contact method of decaffeination.

Decaffeinated coffee

Caffeine content of coffee

Caffeine content of decaffeinated coffee

To ensure product quality, manufacturers are required to test the newly decaffeinated coffee beans to make sure that caffeine concentration is relatively low (no less than 97% caffeine content reduction according to United States standards).^[16] To do so, many coffee companies choose to employ High-performance liquid chromatography to quantitatively measure how much caffeine remains in the coffee beans. However since HPLC can be quite costly, some coffee companies are beginning to use other methods such as Near-infrared (NIR) spectroscopy.^[17] Although HPLC is highly accurate, NIR spectroscopy is much faster, cheaper and overall easier to use. Lastly, another method typically used to quantify remaining caffeine includes Ultraviolet–visible spectroscopy, which can be greatly advantageous for decaffeination processes that include supercritical CO_2, as CO₂ does not absorb in the UV-Vis range.^[18]

A controlled study of ten samples of prepared decaffeinated coffee from coffee shops showed that some caffeine remained.^[1] Fourteen to twenty cups of such decaffeinated coffee would contain as much caffeine as one cup of regular coffee.^[1] The 16-ounce (473-ml) cups of coffee samples contained caffeine in the range of 8.6 mg to 13.9 mg. In another study of popular brands of decaf coffees, the caffeine content varied from 3 mg to 32 mg.^[19] An 8-ounce (237-ml) cup of regular coffee contains 95–200 mg of caffeine,^[20] and a 12-ounce (355-milliliter) serving of Coca-Cola contains 36 mg.^[21]

Both of these studies tested the caffeine content of store-brewed coffee, suggesting that the caffeine may be residual from the normal coffee served rather than poorly decaffeinated coffee.

Decaffito

As of 2009, progress toward growing coffee beans that do not contain caffeine was still continuing. The term "Decaffito" has been coined to describe this type of decaffeinated coffee, and trademarked in Brazil.^[22]

The prospect for Decaffito-type coffees was shown by the discovery of the naturally caffeine-free Coffea charrieriana, reported in 2004. It has a deficient caffeine synthase gene, leading it to accumulate theobromine instead of converting it to caffeine.^[23] Either this trait could be bred into other coffee plants by crossing them with C. charrieriana, or an equivalent effect could be achieved by knocking out the gene for caffeine synthase in normal coffee plants.^[24]

Decaffeinated tea

Tea may also be decaffeinated, usually by using processes analogous to the direct method or the CO₂ process, as described above. The process of oxidizing tea leaves to create black tea ("red" in Chinese tea culture) or oolong tea leaves from green leaves, does not affect the amount of caffeine in the tea, though tea-plant species (i.e., Camellia sinensis sinensis vs. Camellia sinensis assamica) may differ in natural caffeine content. Younger leaves and buds contain more caffeine per weight than older leaves and stems.^[25] Although the CO₂ process is favorable because it is convenient, nonexplosive, and nontoxic,^[26] a comparison between regular and decaffeinated green teas using supercritical carbon dioxide showed that most volatile, nonpolar compounds (such as linalool and phenylacetaldehyde), green and floral flavor compounds (such as hexanal and (E)-2-hexenal), and some unknown compounds disappeared or decreased after decaffeination.^[27]

In addition to CO₂ process extraction, tea may be also decaffeinated using a hot water treatment. Optimal conditions are met by controlling water temperature, extraction time, and ratio of leaf to water, where higher temperatures at or over 100 °C, moderate extraction time of 3 minutes, and a 1:20 water to leaf weight per volume ratio removed 83% caffeine content and preserved 95% of total catechins.^[28] Catechins, a type of flavanol, contribute to the flavor of the tea and also, interestingly, have been shown to increase suppression of mutagens that may lead to cancer.^[29]

Both coffee and tea have tannins, which is responsible for the astringent taste, but tea has nearly three times smaller tannin content than coffee.^[30] Thus, decaffeination of tea requires more care to maintain tannin content than decaffeination of coffee in order to preserve this flavor. Preserving tannins is desirable not only because of their flavor, but also because they have been shown to have anticarcinogenic, antimutagenic, antioxidative, and antimicrobrial properties. Specifically, tannins accelerate blood clotting, reduce blood pressure, decrease the serum lipid level, produce liver necrosis, and modulate immunoresponses.^[31]

Certain processes during normal production might help to decrease the caffeine content directly, or simply lower the rate at which it is released throughout each infusion. Several instances in China where this is evident is in many cooked pu-erh teas, as well as more heavily fired Wuyi Mountain oolongs; commonly referred to as 'zhonghuo' (mid-fired) or 'zuhuo' (high-fired).

A generally accepted statistic is that a cup of normal black (often called red in China; as distinct from green) tea contains 40–50 mg of caffeine, roughly half the content of a cup of coffee.^[32]

Although a common technique of discarding a short (30- to 60-second) steep^[33] is believed to much reduce caffeine content of a subsequent brew at the cost of some loss of flavor, research suggests that a five-minute steep yields up to 70% of the caffeine, and a second steep has one-third the caffeine of the first (about 23% of the total caffeine in the leaves).^[34]

See also

• Health effects of caffeine
• Health effects of tea
• Health effects of coffee
• Coffee substitute

References

1. "Study: Decaf coffee is not caffeine-free". October 15, 2006. Retrieved 2008-01-12.
2. The World of Caffeine, Weinberg and Bealer, Routledge, 2001
3. Emden, Lorenzo. "Decaffeination 101: Four Ways to Decaffeinate Coffee". Coffee Confidential. Retrieved 29 October 2014.
4. US patent 897840, Johann Friedrich Meyer, Jr., Ludwig Roselius, Karl Heinrich Wimmer, "Preparation of coffee", issued 1908-09-01 
5. <https://illumin.usc.edu/204/where-does-my-decaf-come-from
6. "Ludwig Roselius (1874-1943)". Retrieved 2012-08-20.
7. International Agency for Research on Cancer. "Chemical agents and related occupations, Volume 100F. A review of human carcinogens." (PDF). International Agency for Research on Cancer. Retrieved 2014-08-20.
8. Ronald Clarke and O.O. Vizthum Coffee: Recent Developments. Blackwell Science 2001, p. 109.
9. Ronald Clarke and O.O. Vizthum Coffee: Recent Developments. Blackwell Science 2001, p. 111.
10. History of the SWISS WATER Decaffeination Process , Jan 04, 2007
11. US US5208056, Kummer, Peter & Arthur Fischer, "Process for decaffeinating raw coffee", issued May 4, 1993 
12. "Decaffeination". International Coffee Organization. Retrieved 29 October 2014.
13. "Decaffeination". International Coffee Organization. Retrieved 17 April 2015.
14. US Patent 4,409,253, Morrison, Lowen; Melisse Elder & Phillips John, "Recovery of noncaffeine solubles in an extract decaffeination process", published October 11, 1983, issued October 11, 1983 
15. "Coffee Decaffeination". Retrieved 2007-12-17.
16. "Decaffeinated Coffee". www.espressocoffeeguide.com. Retrieved 2015-12-08.
19. "Are You Really Getting Caffeine-Free Decaf Coffee?" Independent research on 10 popular decaffeinated coffees. Viewed Aug 05, 2008
20. "Caffeine Content for Coffee, Tea, Soda, and More" List of caffeine content in beverages known to contain caffeine. Viewed Aug 28, 2012
21. "Caffeine Amounts in Soda: Every Kind of Cola You Can Think Of" List of caffeine content in popular soft drinks. Viewed Aug 28, 2012
22. Paulo Mazzafera, Thomas W. Baumann, Milton Massao Shimizu, Maria Bernadete Silvarolla (June 2009). "Decaf and the Steeplechase Towards Decaffito—the Coffee from Caffeine-Free Arabica Plants". Tropical plant biology 2 (2): 63–76. doi:10.1007/s12042-009-9032-7.
23. Silvarolla MB, Mazzafera P, Fazuoli LC (June 2004). "Plant biochemistry: a naturally decaffeinated arabica coffee". Nature 429 (6994): 826. doi:10.1038/429826a. PMID 15215853.
24. "Naturally decaffeinated coffee plant discovered", NewScientist.com, June 23, 2004
25. "Caffeine Content of Tea". ratetea.com. Retrieved August 29, 2015.
26. Moyler, D (1993). "Extraction of flavours and fragrances with compressed CO2". In King, M; Bott, Theodore. Extraction of Natural Products Using Near-Critical Solvents (First ed.). Glasgow: Springer Netherlands. pp. 140–183. ISBN 978-94-010-4947-4.
27. Lee, S.; Park, M.K.; Kim, K.H.; Kim, Y.-S. (September 2007). "Effect of Supercritical Carbon Dioxide Decaffeination on Volatile Components of Green Tea". Journal of Food Science 72 (7): S497–S502. doi:10.1111/j.1750-3841.2007.00446.x.
28. Liang, Huiling; Liang, Yuerong; Dong, Junjie; Lu, Jianliang; Xu, Hairong; Wang, Hui (2007). "Decaffeination of fresh green tea leaf (Camellia sinensis) by hot water treatment". Food Chemistry 101 (4): 1451–1456. doi:10.1016/j.foodchem.2006.03.054.
29. Bu-Abbas, A; Nunez, X; Clifford, M; Walker, R; Ioannides, C (1996). "A comparison of the antimutagenic potential of green, black and decaffeinated teas: contribution of flavanols to the antimutagenic effect". Mutagenesis 11 (6): 597–603. doi:10.1093/mutage/11.6.597.
30. Savolainen, H (1992). "Tannin content of tea and coffee". J Appl Toxicol 12 (3): 191–192. PMID 1629514.
31. Chung, King-Thom; Wong, Tit Yee; Wei, Cheng-I; Huang, Yao-Wen; Lin, Yuan (1998). "Tannins and Human Health: A Review". Critical Reviews in Food Science and Nutrition 38 (6): 421–464. doi:10.1080/10408699891274273.
32. Upton Tea Imports (2003). "Tea and Caffeine". Upton Tea Imports Newsletter 16 (1). Retrieved 2007-01-26.
33. "FAQ at imperial tea court", www.imperialtea.com, 2002
34. Monique B. Hicks, Y-H. Peggy Hsieh and Leonard N. Bell (1996). "Tea preparation and its influence on methylxanthine concentration". Food Research International 29 (3–4): 325–330. doi:10.1016/0963-9969(96)00038-5.