Tea processing

Tea leaf processing methods for the six most common types of tea

Tea processing is the method in which the leaves from the tea plant Camellia sinensis are transformed into the dried leaves for brewing tea.

The categories of tea are distinguished by the processing they undergo. In its most general form, tea processing involves different manners and degree of oxidation of the leaves, stopping the oxidation, forming the tea and drying it.

The innate flavour of the dried tea leaves is determined by the type of cultivar of the tea bush, the quality of the plucked tea leaves, and the manner and quality of the production processing they undergo. After processing, a tea may be blended with other teas or mixed with flavourants to alter the flavour of the final tea.

History

An 1850 British engraving showing tea cultivation and tea leaf processing

The history of the tea processing corresponds intimately with the role that tea played in Chinese society and the preferred methods of its consumption in Ancient Chinese society.

Green

The ancient Chinese society first encountered the tea plant in what is now southern China and processed it as another medicinal herb for use in Chinese herbology. The processing technique used to process fresh tea leaves was to immediately steam the fresh tea leaves and dry them for preservation, which is likely the most ancient Chinese form of tea leaf processing. This processing method was perfected near the end of the Han Dynasty (206 BCE-220 CE) and produced a dried tea that would be classified today as "green tea" and quite similar to modern Japanese sencha.[1] For consumption, dried tea leaves were either decocted with water around with other herbs, or ground into a powder to be taken straight or in a liquid.

With the increase of tea's use in Chinese herbology, production methods changed, where the processed green tea leaves were not immediately dried after steaming. Rather the steamed tea leaves were first pulverized into a paste form, with the paste then formed in moulds and slowly dried into brick tea, a technique well described by Lu Yu in his work The Classic of Tea. Tender leaves and leaf buds were generally not used, as older mature tea leaves were preferred for tea production. Some tea bricks were also produced from mature whole leaves, which typically required the use of a cooked rice slurry (米湯) to bind the tea brick together.[1] The preference of producing tea in brick form possibly stems from the fact that it can be more easily transported and stored.

Yellow and fermented

This use of steam in fixation (殺青) for tea leaf enzymes is an important step in processing tea, with the leaves to be quickly cooled down and undergo further processing. The less tightly controlled methods of it in the past resulted in the creation of "yellow tea" when the tea leaves were over-steamed for fixation or were not quickly spread out, doused with water and cooled. Although green tea was the most popular in Lu Yu's time, he personally considered yellow tea to be superior to green.[1]

Even when the leaves were quickly cooled, if they are left in piles (渥堆) for too long before processing, the leaves will begin to undergo microbial fermentation to produce "post-fermented tea".[1] This technique is somewhat similar to composting, albeit tightly controlled, and still used in the production of Liu'an tea (安徽六安籃茶) and was more recently introduced for the production of the "ripe" type pu-erh tea. The production of tea in brick forms and their storage also resulted in another type of post-fermented tea, which was produced by aging. The long transport and storage times of the day unwittingly allowed the tea bricks to undergo prolonged exposure to the elements and to various microflora, which resulted in the aging, oxidation, and fermentation of green brick teas. A brick of green tea that had been stored and aged into post-fermented tea was charred over charcoal to rid it of the layer of detritus, dust, and shiny multicoloured growths before being broken down into a powder, cooked, and then consumed. By the end of Tang Dynasty (618-907CE) green, yellow, and post-fermented tea was commonly used in China and moved from purely being used in herbology to becoming a beverage drunk for pleasure.[1]

Oolong and white

The Qing Dynasty was also the period when oolong tea was first developed in the Fujian province. It was originally produced in thin brick form, known then under then name "Beiyuan" tea (北苑茶). The importance of the withering process for producing oolong tea was described by poet Huang Furen (皇甫冉) in his poem "送陸鴻漸棲霞寺采茶", which indicated that the processing of tea leaves is not a simple task, requiring the scaling of steep cliffs to pick the choicest leaves and the withering of the leaves under the sun and warm winds ("采茶非采菉，遠遠上層崖。布葉春風暖，盈筐白日斜...").[2]

White tea (白茶) was also developed in the Fujian province with its first mentions in the Song Dynasty document Treatise on Tea, where the delicate buds used for producing white tea, the difficulty in producing it, its taste, and its rarity were lauded.[3] The production method of white tea was described by Ming Dynasty author Tian Yiheng (田艺蘅) in "Zhuquan Xiaopin" (煮泉小品) (produced in the 33rd year of the Jiajing Emperor) regarding Fuding white tea (福鼎白茶). In this work, he stated that tea buds that have undergone fixation by panning over flames (as with green tea) is second to a white tea that was simply allowed to dry under the sun, since it is more natural in taste and lacks flavours imparted by the smoke and flames ("芽茶以火作者为次，生晒者为上, 亦更近自然，且断烟火气耳")[4]

Black

The technique for producing black tea was first developed during the late Ming Dynasty Wuyishan, Fujian either resulting from the over-oxidation of tea-leaves during the manufacture of oolong tea [5] or indirectly from the methods of manufacturing green and white teas.[6] In the early 1600s, tea producers in the Wuyi Mountains began kneading the sun-withered tea leaves to macerate them, then allowed them to dry under the sun, thus reaching full oxidation and producing "Gongfu" black tea (工夫紅茶).[6] When there was insufficient sun and temperatures were low, the withered leaves would be processed indoors in warmed rooms and allowed to fully oxidize, then smoked dry over pine fires thus producing lapsang souchong.[6] According to oral traditions of the region, the discovery of lapsang souchong processing was due to military troops passing through a Wuyi's tea factory during the last years of the Ming Dynasty, causing delays to tea leaf processing thus resulting in a completely oxidized leaf that the producer salvaged by drying over a fire built from pine branches.[7] By the Qing Dynasty, both lapsang souchong and gongfu black tea were well recognized in China and noted in "Records on Yiwu mountain" (武夷山志) by the scholar Dong Tiangong (董天工).

Procedure

General

Although each type of tea has different taste, smell, and visual appearance, tea processing for all tea types consists of a very similar set of methods with only minor variations. Without careful moisture and temperature control during its manufacture and life thereafter, fungi will grow on tea. This form of fungus causes real fermentation that will contaminate the tea and may render the tea unfit for consumption.

Glass lantern slide, circa 1910, showing a Tangye hydraulic tea press of the type supplied to Cheerkoff, Panoff & Co. of Hankow, China for pressing dried tea leaves into flat 2 1/2 pound cakes for shipping to Asiatic Russia.
  1. Plucking: Tea leaves and flushes, which includes a terminal bud and two young leaves, are picked from Camellia sinensis bushes typically twice a year during early spring and early summer or late spring.[8][9] Autumn or winter pickings of tea flushes are much less common, though they occur when climate permits. Picking is done by hand when a higher quality tea is needed, or where labour costs are not prohibitive. Depending on the skill of the picker, hand-picking is performed by pulling the flush with a snap of the forearm, arm, or even the shoulders, with the picker grasping the tea shoot using the thumb and forefinger, with the middle finger sometimes used in combination.[10] Tea flushes and leaves can also be picked by machine, though there will be more broken leaves and partial flushes reducing the quality of the tea.[11] However, it has also been shown that machine plucking in correctly timed harvesting periods can produce good leaves for the production of high quality teas.[12]
  2. Withering/ Wilting: The tea leaves will begin to wilt soon after picking, with a gradual onset of enzymatic oxidation. Withering is used to remove excess water from the leaves and allows a very slight amount of oxidation.[8] The leaves can be either put under the sun or left in a cool breezy room to pull moisture out from the leaves.[9] The leaves sometimes lose more than a quarter of their weight in water during withering. The process is also important in promoting the breakdown of leaf proteins into free amino acids and increases the availability of freed caffeine, both of which change the taste of the tea.[13]
  3. Disruption: Known in the Western tea industry as "disruption" or "leaf maceration", the teas are bruised or torn in order to promote and quicken oxidation.[14] The leaves may be lightly bruised on their edges by shaking and tossing in a bamboo tray [8] or tumbling in baskets.[15] More extensive leaf disruption can be done by kneading, rolling, tearing, and crushing, usually by machinery.[14] The bruising breaks down the structures inside and outside of the leaf cells and allows from the co-mingling of oxidative enzymes with various substrates, which allows for the beginning of oxidation.[13] This also releases some of the leaf juices, which may aid in oxidation and change the taste profile of the tea.[15]
  4. Oxidation / Fermentation: For teas that require oxidation, the leaves are left on their own in a climate-controlled room where they turn progressively darker. This is accompanied by agitation in some cases.[8] In this process the chlorophyll in the leaves is enzymatically broken down, and its tannins are released or transformed. This process is sometimes referred to as "fermentation" in the tea industry. The tea producer may choose when the oxidation should be stopped, which depends on the desired qualities in the final tea as well as the weather conditions (heat and humidity). For light oolong teas this may be anywhere from 5-40% oxidation, in darker oolong teas 60-70%, and in black teas 100% oxidation. Oxidation is highly important in the formation of many taste and aroma compounds, which give a tea its liquor colour, strength, and briskness.[13] Depending on the type of tea desired, under or over-oxidation/fermentation can result in grassy flavours, or overly thick winey flavours.[16]
  5. Fixation / Kill-green: Kill-green or shāqīng (殺青) is done to stop the tea leaf oxidation at a desired level. This process is accomplished by moderately heating tea leaves, thus deactivating their oxidative enzymes and removing unwanted scents in the leaves, without damaging the flavour of the tea.[8] Traditionally, the tea leaves are panned in a wok[8] or steamed,[9] but with advancements in technology, kill-green is sometimes done by baking or "panning" in a rolling drum. In some white teas and some black teas such as CTC blacks, kill-green is done simultaneously with drying.[16]
  6. Sweltering / Yellowing: Unique to yellow teas, warm and damp tea leaves from after kill-green are allowed to be lightly heated in a closed container, which causes the previously green leaves to turn yellow. The resulting leaves produce a beverage that has a distinctive yellowish-green hue due to transformations of the leaf chlorophyll.[17] Through being sweltered for 6–8 hours at close to human body temperatures, the amino acids and polyphenols in the processed tea leaves undergo chemical changes to give this tea its distinct briskness and mellow taste.[18]
  7. Rolling / Shaping:The damp tea leaves are then rolled to be formed into wrinkled strips, by hand[8] or using a rolling machine which causes the tea to wrap around itself. This rolling action also causes some of the sap, essential oils, and juices inside the leaves to ooze out, which further enhances the taste of the tea.[8] The strips of tea can then be formed into other shapes, such as being rolled into spirals, kneaded and rolled into pellets, or tied into balls, cones and other elaborate shapes. In many types of oolong, the rolled strips of tea leaf are then rolled to spheres or half spheres and is typically done by placing the damp leaves in large cloth bags, which are then kneaded by hand or machine in a specific manner.[15]
  8. Drying: Drying is done to "finish" the tea for sale. This can be done in a myriad of ways including panning, sunning, air drying, or baking. Baking is usually the most common. Great care must be taken to not over-cook the leaves.[15] The drying of the produced tea is responsible for many new flavour compounds particularly important in green teas.[19]
  9. Aging / Curing: While not always required, some teas required additional aging, secondary fermentation, or baking to reach their drinking potential. For instance, a green tea puerh, prior to curing into a post-fermented tea, is often bitter and harsh in taste, but becomes sweet and mellow through fermentation by age or dampness.[9] Additionally, oolong can benefit from aging if fired over charcoal.[8] Flavoured teas are manufactured in this stage by spraying the tea with aromas and flavours or by storing them with their flavorants.[20]
Scenes of and equipment for tea processing
Tea plucking done by tea pickers at Puttabong Tea Estate, Darjeeling 
Worker picking tea flushes in Tanzania. 
Tea leaves being wilted at a Bangladesh tea factory 
Machinery used for fixation, rolling, break up the rolled tea, and drying the tea. 
Steaming and pressing pu-erh tea into tea bricks 
Workers performing fixation (Kill-green) on tea leaves at a Chinese plantation, 1987 

Type-specific

Tea is traditionally classified based on the degree or period of "fermentation" the leaves have undergone:[21][22]

White tea
Young leaves or new growth buds that have undergone minimal oxidation through a slight amount of withering before halting the oxidative processes by being baked dry,[23] with the optimal withering conditions at 30 degrees Celsius (65% relative humidity) for 26 hours.[24] Withering of the leaves can last from around one to three days depending on the season and temperature of the processing environment.[24][25] The buds may be shielded from sunlight to prevent the formation of chlorophyll. White tea is produced in lesser quantities than most other styles, and can be correspondingly more expensive than tea from the same plant processed by other methods. It is less well known in countries outside of China, though this is changing with increased western interest in the tea.[26] There is an international disagreement on definition of white tea between China and other producing countries.[27] In China, White tea is fully oxidized by letting the tea naturally dry out in sunlight. It is different from traditional black teas because it does not undergo any manmade processing such as rolling or curling.
Green tea
This tea has undergone the least amount of oxidation. The oxidation process is halted by the quick application of heat after tea picking, either with steam, the Japanese method, or by dry cooking in hot pans, the traditional Chinese method.[19] Tea leaves may be left to dry as separate leaves or they may be rolled into small pellets to make gunpowder tea. This process is time consuming and is typically done with pekoes of higher quality. The tea is processed within one to two days of harvesting, and if done correctly retains most of the chemical composition of the fresh leaves from which it was produced.[19] Variation in steaming time for fixation or processing from additional stages of rolling and drying are sometimes used to improve or altering the flavour for types of green tea.[28]
Yellow tea
This tea is processed in a similar manner to green tea, but instead of immediate drying after fixation, it is stacked, covered, and gently heated in a humid environment. This initiates oxidation in the chlorophyll of the leaves through non-enzymatic and non-microbial means, which results in a yellowish or greenish-yellow colour.[17]
Oolong tea
This tea's oxidation is stopped somewhere between the standards for green tea and black tea. The processing typically takes two to three days from withering to drying[8] with a relatively short oxidation period[19] of several hours. In Chinese, semi-oxidized teas are collectively grouped as blue tea (青茶, literally: blue-green tea / "celadon tea"), while the term "oolong" is used specifically as a name for certain semi-oxidized teas.[29] Common wisdom about lightly oxidized teas in Taiwan (a large producer of Oolong) is that too little oxidation upsets the stomach of some consumers. Even so, some producers attempt to minimize oxidation in order to produce a specific taste or allow the tea leaves to be easily rolled into the spherical or half-sphere form demanded by buyers in the market.[15]
Black tea
The tea leaves are allowed to completely oxidize. Black tea is first withered to induce protein breakdown and reduce water content (68-77% of original). The leaves then undergo a process known in the industry as "disruption" or "leaf maceration", which through bruising or cutting disrupts leaf cell structures, releasing the leaf juices and enzymes that activate oxidation.[13][19] The oxidation process takes between 45–90 minutes[19] to 3 hours[13] and is done at high humidity between 20-30 degrees Celsius, transforming much of the catechins of the leaves into complex tannin. Orthodox processed black teas are further graded according to the post-production leaf quality by the Orange Pekoe system, while crush, tear, curl (CTC) teas use a different grading system.[30] Orthodox tea leaves are heavily rolled either by hand or mechanically on a cylindrical rolling table or a rotorvane. The rolling table consists of a ridged table-top moving in an eccentric manner to a large hopper of tea leaves, of which the leaves are pressed down onto the table-top. The process produces a mixture of whole and broken leaves, and particles which are then sorted, oxidized, and dried. The rotovane consisted of an auger pushing withered tea leaves through a vane cylinder which crushes and evenly cuts the leaves.[14] Crush, tear, curl is a production method developed by William McKercher in 1930 which uses machines with contra-rotating rotors with surfaces patterning that cut and tear the leaves producing a product popular for use in tea bags. The rotovane to often use to precut the withered tea prior to the CTC and to create broken orthodox processed black tea.[14]
Post-fermented tea
Teas that are allowed to undergo a second oxidation after the fixation of the tea leaves, such as Pu-erh, Liu'an, and Liubao, are collectively referred to as secondary or post-fermentation teas in English.[31] In Chinese they are categorized as Dark tea or black tea. This is not to be confused with the English term Black tea, known in Chinese as red tea. Pu-erh, also known as Póu léi (Polee) in Cantonese is the most common type of post-fermetation tea in the market.
Examples of various types tea
Green Pu-erh tuo cha, a type of compressed raw pu-erh 
Huoshan Huangya tea, a Yellow tea 
Fuding Bai Hao Yinzhen tea, a white tea 
Da Hong Pao tea, an Oolong tea 
Organic Darjeeling White Tea processed at Arya Tea Estate in Darjeeling 
Yunnan golden Dian hong tea, a Black tea 
Black tea produced through CTC processing 

References

  1. 1 2 3 4 5 关, 剑平 (2001), 茶与中国文化, 北京: 人民出版社, ISBN 9787010033860
  2. ↑ 皇, 甫冉, "送陸鴻漸棲霞寺採茶", 全唐詩 249
  3. ↑ 趙, 佶關 (1107), 大觀茶論
  4. ↑ 田, 艺蘅 (1554), "宜茶", 煮泉小品
  5. ↑ 烏龍茶工藝史考證, ChaLib, 2009
  6. 1 2 3 中国红茶的起源, 2011-05-07
  7. ↑ 邹, 新球 (2013-09-11), 武夷正山小种红茶的起源
  8. 1 2 3 4 5 6 7 8 9 10 Li, Guang (2007), Ling Chun Chin, ed., "The Traditional Processing of Wuyi Rock Teas: An Interview with Master Ling Ping Xang", The Art of Tea (Wushing Book Publisher) (2): 76–83
  9. 1 2 3 4 Chan, Kam Pong (November 2006). First-Step to Chinese Puerh Tea (簡易中國普洱茶). Taipei, Taiwan: WuShing Books Publications Co. Ltd. ISBN 978-957-8964-33-4.
  10. ↑ SEN, R. N.; GANGULGI, A. K.; RAY, G. G.; DE, A; CHAKRABARTI, D. (1983), "Tea-leaf plucking-workloads and environmental studies", Ergonomics 26: 887–893, doi:10.1080/00140138308963416
  11. ↑ Ravichandran, Ramaswamy; Parthiban, Ramaswamy (September 1998), "The impact of mechanization of tea harvesting on the quality of south indian CTC teas", Food Chemistry 63 (1): 61–64, doi:10.1016/s0308-8146(97)00219-7
  12. ↑ LUO, Yao-ping; TANG, Meng; CAI, Wei-zhi; WEN, Dong-hua; WEN, Zheng-jun (January 2008), "Study on the Optimum Machine-plucking Period for High Quality Tea", Journal of Tea Science
  13. 1 2 3 4 5 Roberts, E. A. H. (1958), "The Chemistry of Tea Manufacture", J. Sci. Food Agric. 9
  14. 1 2 3 4 Varnam, Alan H.; Sutherland, J. M. (1994), Beverages:Technology, Chemistry and Microbiology, Springer
  15. 1 2 3 4 5 Chen (陳), Huantang(煥堂); Lin (林), Shiyu (世煜) (2008-10-27), The first lesson in Taiwanese tea (台灣茶第一堂課：頂尖茶人教你喝茶一定要知道的事！), 如果出版社, ISBN 978-986-6702-21-1
  16. 1 2 Nabarun Bhattacharyya, Sohan Seth, Bipan Tudu, Pradip Tamuly, Arun Jana ,Devdulal Ghosha Rajib Bandyopadhyay, Manabendra Bhuyan, Santanu Sabhapandit (2007). "Detection of optimum fermentation time for black tea manufacturing using electronic nose". Sensors and Actuators B: Chemical 122: 627–634. doi:10.1016/j.snb.2006.07.013.
  17. 1 2 ZHOU, Ji-rong; CHEN, Yu-qiong; SUN, Ya; NI, De-jiang (2005), "Studies on the Piling Technological Effects on Luyuan Yellow Tea", Food Science
  18. ↑ GONG, Yong xin; CAI, Lie wei; CAI, Shi wen; JIN, Hua jun (2000), "Study on the Effect of Stack cover Process on the Taste of Yellow Tea", JOURNAL OF TEA SCIENCE
  19. 1 2 3 4 5 6 Graham, Harold N. (1992), "Green Tea Composition, Consumption, and Polyphenol Chemistry", PREVENTIVE MEDICINE 21: 334–350, doi:10.1016/0091-7435(92)90041-f, PMID 1614995
  20. ↑ ITO, YURIKO; SUGIMOTO, AKIO; KAKUDA, TAKAMI; KUBOTA, KIKUE (2002), "Identification of Potent Odorants in Chinese Jasmine Green Tea Scented with Flowers of Jasminum sambac", Journal of Agricultural and Food Chemistry 50: 4878–4884, doi:10.1021/jf020282h
  21. ↑ StarChefs (2006). "The Rainbow of Tea". Retrieved 2006-12-21.
  22. ↑ Tea processing: Introduction to the Six Tea Manufacturing Processes (in Chinese), 中国文艺版权
  23. ↑ Zhang, Li Wang (April 1994), "A Further Study white tea quality control (再探白茶品质的控制)", Chinese Tea Processing (in Chinese)
  24. 1 2 Guo, Li; Kai, Liang Sui; Lin, Chi (2011), "Research regarding the standardization of Chinese white tea wilting processes (中国白茶的标准化萎凋工艺研究)", Chinese Agricultural Science Bulletin (in Chinese) 27 (2): 382–385
  25. ↑ Huang, Guo Zhi (1996), "The steps for processing Yinghong no.9 into White Tea (英红九号加工白茶的技术指标研究)", China Guangdong Tea (in Chinese) 2: 27–31
  26. ↑ Gondoin, Anais; Grussu, Dominic; Stewart,, Derek; McDougall, Gordon J (June 2010), "White and green tea polyphenols inhibit pancreatic lipase in vitro", Food Research International 43 (5): 1537–1544, doi:10.1016/j.foodres.2010.04.029
  27. ↑ Hilal and, Y.; Engelhardt, U. (2007), "Characterisation of white tea – Comparison to green and black tea" (PDF), J. Verbr. Lebensm. (2): 414–421
  28. ↑ The Processing of Sencha Green Tea, Ito En
  29. ↑ The Best Tea House Co. Ltd. (2005). "The Classification and Production of Tea" (in Chinese). Retrieved 2006-12-21.
  30. ↑ Hoh, Erling; Mair, Victor H. (2009), The True History of Tea, Thames & Hudson, Thames & Hudson, ISBN 978-0-500-25146-1
  31. ↑ Wen, Zhijie; Zhang, Ling Yun; Wu, Ping; He, Yong Qiang (2010), "Research on the action on microbes on post-fermented tea processing (黑茶加工中微生物作用的研究)", Tea Communication (in Chinese) 37 (2)

External links

This article is issued from Wikipedia - version of the Tuesday, April 19, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.