Grandview Speedway
      Grandview Speedway| The Greatest Show on Dirt | 
|---|
| Location | Washington Township, Berks County, near Bechtelsville, Pennsylvania | 
|---|
| Time zone | GMT-4 | 
|---|
| Capacity | ~5,000 | 
|---|
| Owner | Bruce Rogers | 
|---|
| Operator | Bruce Rogers | 
|---|
| Broke ground | 1962 | 
|---|
| Opened | 1963 | 
|---|
| Oval | 
|---|
| Surface | Clay | 
|---|
| Length | 0.333 mi (0.535 km) | 
|---|
| Turns | 4 | 
|---|
| Lap record | 0:14.635 (Matt Sheppard, Ross Motorsports, 2004) | 
|---|
Grandview Speedway is a one third-mile automobile race track located just east of Bechtelsville, Pennsylvania, United States.  Featuring moderately high banks and a wide racing surface, it is suitable for close racing and passing.
The track opened in 1963 and was built by Forrest Rogers.  The track was originally planned as a ¼ mile (402 meters) asphalt track in Pottstown, Pennsylvania.  Eventually this was changed to a larger dirt track in Bechtelsville, Pennsylvania.  Forrest Rogers died of a heart attack in 1966.  His son, Bruce Rogers, took control of the race track and operates it to this day.
It features a regular weekly series of modified and late model stock car racing.
See also
Coordinates: 40°22′23″N 75°36′36″W / 40.373°N 75.610°W / 40.373; -75.610
| |  | 
|---|
 |  |  | Current dirt ovals |  | 
|---|
 |  |  | Former dirt ovals |  | 
|---|
 |  |  | Former paved ovals |  | 
|---|
 | 
How to manage this template's initial visibility
To manage this template's visibility when it first appears, add the parameter:
- |state=collapsedto show the template in its collapsed state, i.e. hidden apart from its titlebar – e.g.- {{Grandview Speedway |state=collapsed}}
- |state=expandedto show the template in its expanded state, i.e. fully visible – e.g.- {{Grandview Speedway |state=expanded}}
- |state=autocollapseto show the template in its collapsed state but only if there is another template of the same type on the page – e.g.- {{Grandview Speedway |state=autocollapse}}
Unless set otherwise (see the |state= parameter in the template's code), the template's default state is autocollapse.