Hafnium

Hafnium,  ₇₂Hf

Spectral lines of hafnium (400–700 nm)
General properties
Name, symbol	hafnium, Hf
Appearance	steel gray
Pronunciation	/ˈhæfniəm/ HAF-nee-əm
Hafnium in the periodic table
Zr ↑ Hf ↓ Rf lutetium ← hafnium → tantalum
Atomic number (Z)	72
Group, block	group 4, d-block
Period	period 6
Element category	transition metal
Standard atomic weight (±) (Ar)	178.49(2)[1]
Electron configuration	[Xe] 4f^14 5d^2 6s^2
per shell	2, 8, 18, 32, 10, 2
Physical properties
Phase	solid
Melting point	2506 K ​(2233 °C, ​4051 °F)
Boiling point	4876 K ​(4603 °C, ​8317 °F)
Density near r.t.	13.31 g/cm^3
when liquid, at m.p.	12 g/cm^3
Heat of fusion	27.2 kJ/mol
Heat of vaporization	648 kJ/mol
Molar heat capacity	25.73 J/(mol·K)
vapor pressure P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 2689 2954 3277 3679 4194 4876
Atomic properties
Oxidation states	4, 3, 2, 1, −2 ​(an amphoteric oxide)
Electronegativity	Pauling scale: 1.3
Ionization energies	1st: 658.5 kJ/mol 2nd: 1440 kJ/mol 3rd: 2250 kJ/mol
Atomic radius	empirical: 159 pm
Covalent radius	175±10 pm
Miscellanea
Crystal structure	​hexagonal close-packed (hcp)
Speed of sound thin rod	3010 m/s (at 20 °C)
Thermal expansion	5.9 µm/(m·K) (at 25 °C)
Thermal conductivity	23.0 W/(m·K)
Electrical resistivity	331 nΩ·m (at 20 °C)
Magnetic ordering	paramagnetic[2]
Young's modulus	78 GPa
Shear modulus	30 GPa
Bulk modulus	110 GPa
Poisson ratio	0.37
Mohs hardness	5.5
Vickers hardness	1520–2060 MPa
Brinell hardness	1450–2100 MPa
CAS Number	7440-58-6
History
Naming	after Hafnia. Latin for: Copenhagen, where it was discovered
Prediction	Dmitri Mendeleev (1869)
Discovery and first isolation	Dirk Coster and George de Hevesy (1922)
Most stable isotopes of hafnium
iso NA half-life DM DE (MeV) DP ^172Hf syn 1.87 y ε 0.350 ^172Lu ^174Hf 0.162% 2×10^15 y α 2.495 ^170Yb ^176Hf 5.206% – (α) 2.2550 ^172Yb ^177Hf 18.606% – (α) 2.2449 ^173Yb ^178Hf 27.297% – (α) 2.0832 ^174Yb ^178m2Hf syn 31 y IT 2.446 ^178Hf ^179Hf 13.629% – (α) 1.8065 ^175Yb ^180Hf 35.1% – (α) 1.2828 ^176Yb ^182Hf trace 8.9×10^6 y β^− 0.373 ^182Ta
Decay modes in parentheses are predicted, but have not yet been observed

Hafnium is a chemical element with symbol Hf and atomic number 72. A lustrous, silvery gray, tetravalent transition metal, hafnium chemically resembles zirconium and is found in zirconium minerals. Its existence was predicted by Dmitri Mendeleev in 1869, though it was not identified until 1923, making it the penultimate stable element to be discovered (rhenium was identified two years later). Hafnium is named after Hafnia, the Latin name for Copenhagen, where it was discovered.^[3][4]

Hafnium is used in filaments and electrodes. Some semiconductor fabrication processes use its oxide for integrated circuits at 45 nm and smaller feature lengths. Some superalloys used for special applications contain hafnium in combination with niobium, titanium, or tungsten.

Hafnium's large neutron capture cross-section makes it a good material for neutron absorption in control rods in nuclear power plants, but at the same time requires that it be removed from the neutron-transparent corrosion-resistant zirconium alloys used in nuclear reactors.

Characteristics

Physical characteristics

Hafnium bits

Hafnium is a shiny, silvery, ductile metal that is corrosion-resistant and chemically similar to zirconium^[5] (due to its having the same number of valence electrons and being in the same group). The physical properties of hafnium metal samples are markedly affected by zirconium impurities, especially the nuclear properties, as these two elements are among the most difficult to separate because of their chemical similarity.^[5]

A notable physical difference between these metals is their density, with zirconium having about one-half the density of hafnium. The most notable nuclear properties of hafnium are its high thermal neutron-capture cross-section and that the nuclei of several different hafnium isotopes readily absorb two or more neutrons apiece.^[5] In contrast with this, zirconium is practically transparent to thermal neutrons, and it is commonly used for the metal components of nuclear reactors – especially the claddings of their nuclear fuel rods.

Chemical characteristics

Hafnium dioxide

Hafnium reacts in air to form a protective film that inhibits further corrosion. The metal is not readily attacked by acids but can be oxidized with halogens or it can be burnt in air. Like its sister metal zirconium, finely divided hafnium can ignite spontaneously in air, producing an effect similar to that obtained in Dragon's Breath.^[6] The metal is resistant to concentrated alkalis.

The chemistry of hafnium and zirconium is so similar that the two cannot be separated on the basis of differing chemical reactions. The melting points and boiling points of the compounds and the solubility in solvents are the major differences in the chemistry of these twin elements.^[7]

Isotopes

At least 34 isotopes of hafnium have been observed, ranging in mass number from 153 to 186.^[8][9] The five stable isotopes are in the range of 176 to 180. The radioactive isotopes' half-lives range from only 400 ms for ¹⁵³Hf,^[9] to 2.0 petayears (10¹⁵ years) for the most stable one, ¹⁷⁴Hf.^[8]

The nuclear isomer ^178m2Hf was at the center of a controversy for several years regarding its potential use as a weapon.

Occurrence

Zircon crystal (2×2 cm) from Tocantins, Brazil

Hafnium is estimated to make up about 5.8 ppm of the Earth's upper crust by mass. It does not exist as a free element in nature, but is found combined in solid solution with zirconium in natural zirconium compounds such as zircon, ZrSiO₄, which usually has about 1 – 4% of the Zr replaced by Hf. Rarely, the Hf/Zr ratio increases during crystallization to give the isostructural mineral "hafnon" (Hf,Zr)SiO₄, with atomic Hf > Zr.^[10] An old (obsolete) name for a variety of zircon containing unusually high Hf content is alvite.^[11]

A major source of zircon (and hence hafnium) ores is heavy mineral sands ore deposits, pegmatites, particularly in Brazil and Malawi, and carbonatite intrusions, particularly the Crown Polymetallic Deposit at Mount Weld, Western Australia. A potential source of hafnium is trachyte tuffs containing rare zircon-hafnium silicates eudialyte or armstrongite, at Dubbo in New South Wales, Australia.^[12]

Hafnium reserves have been infamously estimated to last under 10 years by one source if the world population increases and demand grows.^[13] In reality, since hafnium occurs with zirconium, hafnium can always be a byproduct of zirconium extraction to the extent that the low demand requires.

Production

Melted tip of a hafnium consumable electrode used in an ebeam remelting furnace

The heavy mineral sands ore deposits of the titanium ores ilmenite and rutile yield most of the mined zirconium, and therefore also most of the hafnium.^[14]

Zirconium is a good nuclear fuel-rod cladding metal, with the desirable properties of a very low neutron capture cross-section and good chemical stability at high temperatures. However, because of hafnium's neutron-absorbing properties, hafnium impurities in zirconium would cause it to be far less useful for nuclear-reactor applications. Thus, a nearly complete separation of zirconium and hafnium is necessary for their use in nuclear power. The production of hafnium-free zirconium is the main source for hafnium.^[5]

Hafnium oxidized ingots which exhibits thin film optical effects.

The chemical properties of hafnium and zirconium are nearly identical, which makes the two difficult to separate.^[15] The methods first used — fractional crystallization of ammonium fluoride salts^[16] or the fractionated distillation of the chloride^[17] — have not proven suitable for an industrial-scale production. After zirconium was chosen as material for nuclear reactor programs in the 1940s, a separation method had to be developed. Liquid-liquid extraction processes with a wide variety of solvents were developed and are still used for the production of hafnium.^[18] About half of all hafnium metal manufactured is produced as a by-product of zirconium refinement. The end product of the separation is hafnium(IV) chloride.^[19] The purified hafnium(IV) chloride is converted to the metal by reduction with magnesium or sodium, as in the Kroll process.^[20]

HfCl₄ + 2 Mg (1100 °C) → 2 MgCl₂ + Hf

Further purification is effected by a chemical transport reaction developed by Arkel and de Boer: In a closed vessel, hafnium reacts with iodine at temperatures of 500 °C, forming hafnium(IV) iodide; at a tungsten filament of 1700 °C the reverse reaction happens, and the iodine and hafnium are set free. The hafnium forms a solid coating at the tungsten filament, and the iodine can react with additional hafnium, resulting in a steady turn over.^[7][21]

Hf + 2 I₂ (500 °C) → HfI₄

HfI₄ (1700 °C) → Hf + 2 I₂

Chemical compounds

Hafnium and zirconium form nearly identical series of chemical compounds.^[22] Hafnium tends to form inorganic compounds in the oxidation state of +4. Halogens react with it to form hafnium tetrahalides.^[22] At higher temperatures, hafnium reacts with oxygen, nitrogen, carbon, boron, sulfur, and silicon.^[22] Due to the lanthanide contraction of the elements in the sixth period, zirconium and hafnium have nearly identical ionic radii. The ionic radius of Zr⁴⁺ is 0.79 angstrom and that of Hf⁴⁺ is 0.78 angstrom.^[22]

Hafnium(IV) chloride and hafnium(IV) iodide have some applications in the production and purification of hafnium metal. They are volatile solids with polymeric structures.^[7] These tetrachlorides are precursors to various organohafnium compounds such as hafnocene dichloride and tetrabenzylhafnium.

The white hafnium oxide (HfO₂), with a melting point of 2812 °C and a boiling point of roughly 5100 °C, is very similar to zirconia, but slightly more basic.^[7] Hafnium carbide is the most refractory binary compound known, with a melting point over 3890 °C, and hafnium nitride is the most refractory of all known metal nitrides, with a melting point of 3310 °C.^[22] This has led to proposals that hafnium or its carbides might be useful as construction materials that are subjected to very high temperatures. The mixed carbide tantalum hafnium carbide (Ta
4HfC
5) possesses the highest melting point of any currently known compound, 4215 °C.^[23] Recent supercomputer simulations suggest a hafnium alloy with a melting point of 4400 K.^[24]

History

Photographic recording of the characteristic X-ray emission lines of some elements

In his report on The Periodic Law of the Chemical Elements, in 1869, Dmitri Mendeleev had implicitly predicted the existence of a heavier analog of titanium and zirconium. At the time of his formulation in 1871, Mendeleev believed that the elements were ordered by their atomic masses and placed lanthanum (element 57) in the spot below zirconium. The exact placement of the elements and the location of missing elements was done by determining the specific weight of the elements and comparing the chemical and physical properties.^[25]

The X-ray spectroscopy done by Henry Moseley in 1914 showed a direct dependency between spectral line and effective nuclear charge. This led to the nuclear charge, or atomic number of an element, being used to ascertain its place within the periodic table. With this method, Moseley determined the number of lanthanides and showed the gaps in the atomic number sequence at numbers 43, 61, 72, and 75.^[26]

The discovery of the gaps led to an extensive search for the missing elements. In 1914, several people claimed the discovery after Henry Moseley predicted the gap in the periodic table for the then-undiscovered element 72.^[27] Georges Urbain asserted that he found element 72 in the rare earth elements in 1907 and published his results on celtium in 1911.^[28] Neither the spectra nor the chemical behavior matched with the element found later, and therefore his claim was turned down after a long-standing controversy.^[29] The controversy was partly because the chemists favored the chemical techniques which led to the discovery of celtium, while the physicists relied on the use of the new X-ray spectroscopy method that proved that the substances discovered by Urbain did not contain element 72.^[29] By early 1923, several physicists and chemists such as Niels Bohr^[30] and Charles R. Bury^[31] suggested that element 72 should resemble zirconium and therefore was not part of the rare earth elements group. These suggestions were based on Bohr's theories of the atom, the X-ray spectroscopy of Mosley, and the chemical arguments of Friedrich Paneth.^[32][33]

Encouraged by these suggestions and by the reappearance in 1922 of Urbain's claims that element 72 was a rare earth element discovered in 1911, Dirk Coster and Georg von Hevesy were motivated to search for the new element in zirconium ores.^[34] Hafnium was discovered by the two in 1923 in Copenhagen, Denmark, validating the original 1869 prediction of Mendeleev.^[35][36] It was ultimately found in zircon in Norway through X-ray spectroscopy analysis.^[37] The place where the discovery took place led to the element being named for the Latin name for "Copenhagen", Hafnia, the home town of Niels Bohr.^[38] Today, the Faculty of Science of the University of Copenhagen uses in its seal a stylized image of the hafnium atom.^[39]

Hafnium was separated from zirconium through repeated recrystallization of the double ammonium or potassium fluorides by Valdemar Thal Jantzen and von Hevesey.^[16] Anton Eduard van Arkel and Jan Hendrik de Boer were the first to prepare metallic hafnium by passing hafnium tetraiodide vapor over a heated tungsten filament in 1924.^[17][21] This process for differential purification of zirconium and hafnium is still in use today.^[5]

In 1923, four predicted elements were still missing from the periodic table: 43 (technetium) and 61 (promethium) are radioactive elements and are only present in trace amounts in the environment,^[40] thus making elements 75 (rhenium) and 72 (hafnium) the last two unknown non-radioactive elements. Since rhenium was discovered in 1925,^[41] hafnium was the next-to-last element with stable isotopes to be discovered.

Applications

Several details contribute to the fact that there are only a few technical uses for hafnium: First, the close similarity between hafnium and zirconium makes it possible to use zirconium for most of the applications; second, hafnium was first available as pure metal after the use in the nuclear industry for hafnium-free zirconium in the late 1950s. Furthermore, the low abundance and difficult separation techniques necessary make it a scarce commodity.^[5]

Most of the hafnium produced is used in the production of control rods for nuclear reactors.^[18]

Nuclear reactors

The nuclei of several hafnium isotopes can each absorb multiple neutrons. This makes hafnium a good material for use in the control rods for nuclear reactors. Its neutron-capture cross-section is about 600 times that of zirconium. (Other elements that are good neutron-absorbers for control rods are cadmium and boron.) Excellent mechanical properties and exceptional corrosion-resistance properties allow its use in the harsh environment of pressurized water reactors.^[18] The German research reactor FRM II uses hafnium as a neutron absorber.^[42] It is also common in military reactors, particularity in US naval reactors,^[43] but seldom found in civilian ones, the first core of the Shippingport Atomic Power Station (a conversion of a naval reactor) being a notable exception.^[44]

Alloys

Hafnium-containing rocket nozzle of the Apollo Lunar Module in the lower right corner

Hafnium is used in alloys with iron, titanium, niobium, tantalum, and other metals. An alloy used for liquid rocket thruster nozzles, for example the main engine of the Apollo Lunar Modules, is C103 which consists of 89% niobium, 10% hafnium and 1% titanium.^[45]

Small additions of hafnium increase the adherence of protective oxide scales on nickel-based alloys. It improves thereby the corrosion resistance especially under cyclic temperature conditions that tend to break oxide scales by inducing thermal stresses between the bulk material and the oxide layer.^[46][47][48]

Microprocessors

Hafnium-based compounds are employed in gate insulators in the 45 nm generation of integrated circuits from Intel, IBM and others.^[49][50] Hafnium oxide-based compounds are practical high-k dielectrics, allowing reduction of the gate leakage current which improves performance at such scales.^[51][52]

Isotope geochemistry

Isotopes of hafnium and lutetium (along with ytterbium) are also utilized in isotope geochemistry and geochronological applications. It is often used as a tracer of isotopic evolution of Earth’s mantle through time.^[53] This is because ¹⁷⁶Lu decay to ¹⁷⁶Hf with a half-life of approximately 37 billion years.^[54][55][56]

In most geologic materials, zircon is the dominant host of hafnium (>10,000 ppm) and is often the focus of hafnium studies in geology.^[57] Hafnium is readily substituted into the zircon crystal lattice, and is therefore very resistant to hafnium mobility and contamination. Zircon also has an extremely low Lu/Hf ratio, making any correction for initial lutetium minimal. Although the Lu/Hf system can be used to calculate a "model age", i.e. the time at which it was derived from a given isotopic reservoir such as the depleted mantle, these "ages" do not carry the same geologic significance as do other geochronological techniques as the results often yield isotopic mixtures and thus provide an average age of the material from which it was derived.

Garnet is another mineral that contains appreciable amounts of hafnium to act as a geochronometer. Given the high and variable Lu/Hf ratios found in garnet make it useful for dating metamorphic events.^[58]

Other uses

Due to its heat resistance and its affinity to oxygen and nitrogen, hafnium is a good scavenger for oxygen and nitrogen in gas-filled and incandescent lamps. Hafnium is also used as the electrode in plasma cutting because of its ability to shed electrons into air.^[59]

The high energy content of ^178m2Hf was the concern of a DARPA-funded program in the US. This program determined that the possibility of using a nuclear isomer of hafnium (the above-mentioned ^178m2Hf) to construct high-yield weapons with X-ray triggering mechanisms—an application of induced gamma emission—was infeasible because of its expense. See Hafnium controversy.

Precautions

Care needs to be taken when machining hafnium because it is pyrophoric—fine particles can spontaneously combust when exposed to air. Compounds that contain this metal are rarely encountered by most people. The pure metal is not considered toxic, but hafnium compounds should be handled as if they were toxic because the ionic forms of metals are normally at greatest risk for toxicity, and limited animal testing has been done for hafnium compounds.^[60]

People can be exposed to hafnium in the workplace by breathing it in, swallowing it, skin contact, and eye contact. The Occupational Safety and Health Administration (OSHA) has set the legal limit (Permissible exposure limit) for exposure to hafnium and hafnium compounds in the workplace as TWA 0.5 mg/m³ over an 8-hour workday. The National Institute for Occupational Safety and Health (NIOSH) has set the same recommended exposure limit (REL). At levels of 50 mg/m³, hafnium is immediately dangerous to life and health.^[61]

See also

• Nuclear isomer
• Induced gamma emission
• Zircon
• Zirconium

References

1. Standard Atomic Weights 2013. Commission on Isotopic Abundances and Atomic Weights
2. Lide, D. R., ed. (2005). "Magnetic susceptibility of the elements and inorganic compounds". CRC Handbook of Chemistry and Physics (PDF) (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
3. André Authier (1 August 2013). Early Days of X-ray Crystallography. OUP Oxford. p. 153. ISBN 978-0-19-163501-4.
4. Knapp, Brian. Francium to Polonium. Atlantic Europe Publishing Company, 2002, p. 10.
5. Schemel, J. H. (1977). ASTM Manual on Zirconium and Hafnium. ASTM International. pp. 1–5. ISBN 978-0-8031-0505-8.
6. "Occupational Safety and Health Guideline for Hafnium". U.S. Department of Labor. Retrieved 2008-09-10.
7. Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 1056–1057. ISBN 3-11-007511-3.
8. EnvironmentalChemistry.com. "Hafnium Nuclides / Isotopes". Periodic Table of Elements. J.K. Barbalace. Retrieved 2008-09-10.
9. Georges, Audi; Bersillon, O.; Blachot, J.; Wapstra, A.H. (2003). "The NUBASE Evaluation of Nuclear and Decay Properties". Nuclear Physics A (Atomic Mass Data Center) 729: 3–128. Bibcode:2003NuPhA.729....3A. doi:10.1016/j.nuclphysa.2003.11.001.
10. Deer, William Alexander; Howie, R.A.; Zussmann, J. (1982). The Rock-Forming Minerals, volume 1A: Orthosilicates. Longman Group Limited. pp. 418–442. ISBN 0-582-46526-5.
11. Lee, O. Ivan (1928). "The Mineralogy of Hafnium". Chemical Reviews 5: 17–37. doi:10.1021/cr60017a002.
12. "Dubbo Zirconia Project Fact Sheet" (PDF). Alkane Resources Limited. June 2007. Retrieved 2008-09-10.
13. cite web |url=http://www.science.org.au/nova/newscientist/ns_diagrams/027ns_005image2.jpg |title = New Scientist diagram How Long Will It Last
14. Gambogi, Joseph. "Yearbook 2008: Zirconium and Hafnium" (pdf). United States Geological Survey. Retrieved 2008-10-27.
15. Larsen, Edwin; Fernelius W., Conard; Quill, Laurence (1943). "Concentration of Hafnium. Preparation of Hafnium-Free Zirconia". Ind. Eng. Chem. Anal. Ed. 15 (8): 512–515. doi:10.1021/i560120a015.
16. van Arkel, A. E.; de Boer, J. H. (1924). "Die Trennung von Zirkonium und Hafnium durch Kristallisation ihrer Ammoniumdoppelfluoride (The separation of zirconium and hafnium by crystallization of the double ammonium fluorides)". Zeitschrift für anorganische und allgemeine Chemie (in German) 141: 284–288. doi:10.1002/zaac.19241410117.
17. van Arkel, A. E.; de Boer, J. H. (1924). "Die Trennung des Zirkoniums von anderen Metallen, einschließlich Hafnium, durch fraktionierte Distillation (The separation of zirconium and hafnium by fractionated distillation)". Zeitschrift für anorganische und allgemeine Chemie (in German) 141: 289–296. doi:10.1002/zaac.19241410118.
18. Hedrick, James B. "Hafnium" (pdf). United States Geological Survey. Retrieved 2008-09-10.
19. Griffith, Robert F. (1952). "Zirconium and hafnium". Minerals yearbook metals and minerals (except fuels). The first production plants Bureau of Mines. pp. 1162–1171.
20. Gilbert, H. L.; Barr, M. M. (1955). "Preliminary Investigation of Hafnium Metal by the Kroll Process". Journal of the Electrochemical Society 102 (5): 243. doi:10.1149/1.2430037.
21. van Arkel, A. E.; de Boer, J. H. (1925). "Darstellung von reinem Titanium-, Zirkonium-, Hafnium- und Thoriummetall (Production of pure titanium, zirconium, hafnium and Thorium metal)". Zeitschrift für anorganische und allgemeine Chemie (in German) 148: 345–350. doi:10.1002/zaac.19251480133.
22. "Los Alamos National Laboratory – Hafnium". Retrieved 2008-09-10.
23. Deadmore, D. L. (1964). "Vaporization of Tantalum-Carbide-Hafnium-Carbide Solid Solutions at 2500 to 3000 K" (PDF). NASA. Retrieved 2008-11-02.
24. Hong, Qi-Jun; van de Walle, Axel (2015). "Prediction of the material with highest known melting point from ab initio molecular dynamics calculations". Phys. Rev. B 92. doi:10.1103/PhysRevB.92.020104.
25. Kaji, Masanori (2002). "D. I. Mendeleev's concept of chemical elements and The Principles of Chemistry" (pdf). Bulletin for the History of Chemistry 27: 4. Retrieved 2008-08-20.
26. Heilbron, John L. (1966). "The Work of H. G. J. Moseley". Isis 57 (3): 336. doi:10.1086/350143.
27. Heimann, P. M. (1967). "Moseley and celtium: The search for a missing element". Annals of Science 23 (4): 249–260. doi:10.1080/00033796700203306.
28. Urbain, M. G. (1911). "Sur un nouvel élément qui accompagne le lutécium et le scandium dans les terres de la gadolinite: le celtium (On a new element that accompanies lutetium and scandium in gadolinite: celtium)". Comptes rendus (in French): 141. Retrieved 2008-09-10.
29. Mel'nikov, V. P. (1982). "Some Details in the Prehistory of the Discovery of Element 72". Centaurus 26 (3): 317–322. Bibcode:1982Cent...26..317M. doi:10.1111/j.1600-0498.1982.tb00667.x.
30. Bohr, Niels. The Theory of Spectra and Atomic Constitution: Three Essays. p. 114. ISBN 1-4365-0368-X.
31. Bury, Charles R. (1921). "Langmuir's Theory of the Arrangement of Electrons in Atoms and Molecules". J. Amer. Chem. Soc. 43 (7): 1602–1609. doi:10.1021/ja01440a023.
32. Paneth, F. A. (1922). "Das periodische System (The periodic system)". Ergebnisse der Exakten Naturwissenschaften 1 (in German). p. 362.
33. Fernelius, W. C. (1982). "Hafnium" (PDF). Journal of Chemical Education 59 (3): 242. Bibcode:1982JChEd..59..242F. doi:10.1021/ed059p242.
34. Urbain, M. G. (1922). "Sur les séries L du lutécium et de l'ytterbium et sur l'identification d'un celtium avec l'élément de nombre atomique 72" [The L series from lutetium to ytterbium and the identification of element 72 celtium]. Comptes rendus (in French) 174: 1347. Retrieved 2008-10-30.
35. Coster, D.; Hevesy, G. (1923). "On the Missing Element of Atomic Number 72". Nature 111 (2777): 79. Bibcode:1923Natur.111...79C. doi:10.1038/111079a0.
36. Hevesy, G. (1925). "The Discovery and Properties of Hafnium". Chemical Reviews 2: 1–41. doi:10.1021/cr60005a001.
37. von Hevesy, Georg (1923). "Über die Auffindung des Hafniums und den gegenwärtigen Stand unserer Kenntnisse von diesem Element". Berichte der deutschen chemischen Gesellschaft (A and B Series) 56 (7): 1503–1516. doi:10.1002/cber.19230560702.
38. Scerri, Eric R. (1994). "Prediction of the nature of hafnium from chemistry, Bohr's theory and quantum theory". Annals of Science 51 (2): 137–150. doi:10.1080/00033799400200161.
39. "University Life 2005" (pdf). University of Copenghagen. p. 43. Retrieved 2008-11-02.
40. Curtis, David; Fabryka-Martin, June; Dixon, Pauland; Cramer, Jan (1999). "Nature's uncommon elements: plutonium and technetium". Geochimica et Cosmochimica Acta 63 (2): 275–285. Bibcode:1999GeCoA..63..275C. doi:10.1016/S0016-7037(98)00282-8.
41. Noddack, W.; Tacke, I.; Berg, O. (1925). "Die Ekamangane". Naturwissenschaften 13 (26): 567–574. Bibcode:1925NW.....13..567.. doi:10.1007/BF01558746.
42. "Forschungsreaktor München II (FRM-II): Standort und Sicherheitskonzept" (PDF). Strahlenschutzkommission. 1996-02-07. Archived from the original (pdf) on October 20, 2007. Retrieved 2008-09-22.
43. J. H. Schemel (1977). ASTM Manual on Zirconium and Hafnium. ASTM International. p. 21. ISBN 978-0-8031-0505-8.
44. C.W. Forsberg; K. Takase & N. Nakatsuka (2011). "Water Reactor". In Xing L. Yan & Ryutaro Hino. Nuclear Hydrogen Production Handbook. CRC Press. p. 192. ISBN 978-1-4398-1084-2.
45. Hebda, John (2001). "Niobium alloys and high Temperature Applications" (pdf). CBMM. Retrieved 2008-09-04.
46. Maslenkov, S. B.; Burova, N. N.; Khangulov, V. V. (1980). "Effect of hafnium on the structure and properties of nickel alloys". Metal Science and Heat Treatment 22 (4): 283–285. doi:10.1007/BF00779883.
47. Beglov, V. M.; Pisarev, B. K.; Reznikova, G. G. (1992). "Effect of boron and hafnium on the corrosion resistance of high-temperature nickel alloys". Metal Science and Heat Treatment 34 (4): 251–254. doi:10.1007/BF00702544.
48. Voitovich, R. F.; Golovko, É. I. (1975). "Oxidation of hafnium alloys with nickel". Metal Science and Heat Treatment 17 (3): 207–209. doi:10.1007/BF00663680.
49. US 6013553 
50. Markoff, John (2007-01-27). "Intel Says Chips Will Run Faster, Using Less Power". New York Times. Retrieved 2008-09-10.
51. Fulton, III, Scott M. (January 27, 2007). "Intel Reinvents the Transistor". BetaNews. Retrieved 2007-01-27.
52. Robertson, Jordan (January 27, 2007). "Intel, IBM reveal transistor overhaul". The Associated Press. Retrieved 2008-09-10.
53. Patchett, P.Jonathan (January 1983). "Importance of the Lu-Hf isotopic system in studies of planetary chronology and chemical evolution". Geochimica et Cosmochimica Acta 47 (1): 81–91. doi:10.1016/0016-7037(83)90092-3.
54. Söderlund, Ulf; Patchett, P.Jonathan; Vervoort, Jeffrey D; Isachsen, Clark E (March 2004). "The 176Lu decay constant determined by Lu–Hf and U–Pb isotope systematics of Precambrian mafic intrusions". Earth and Planetary Science Letters 219 (3-4): 311–324. Bibcode:2004E&PSL.219..311S. doi:10.1016/S0012-821X(04)00012-3.
55. Blichert-Toft, Janne; Albarède, Francis (April 1997). "The Lu-Hf isotope geochemistry of chondrites and the evolution of the mantle-crust system". Earth and Planetary Science Letters 148 (1-2): 243–258. Bibcode:1997E&PSL.148..243B. doi:10.1016/S0012-821X(97)00040-X.
56. Patchett, P. J.; Tatsumoto, M. (11 December 1980). "Lu–Hf total-rock isochron for the eucrite meteorites". Nature 288 (5791): 571–574. doi:10.1038/288571a0.
57. Kinny, P. D. (1 January 2003). "Lu-Hf and Sm-Nd isotope systems in zircon". Reviews in Mineralogy and Geochemistry 53 (1): 327–341. doi:10.2113/0530327.
58. Albarède, F.; Duchêne, S.; Blichert-Toft, J.; Luais, B.; Télouk, P.; Lardeaux, J.-M. (5 June 1997). Nature 387 (6633): 586–589. doi:10.1038/42446. Missing or empty |title= (help)
59. Ramakrishnany, S.; Rogozinski, M. W. (1997). "Properties of electric arc plasma for metal cutting" (pdf). Journal of Physics D: Applied Physics 30 (4): 636–644. Bibcode:1997JPhD...30..636R. doi:10.1088/0022-3727/30/4/019.
60. "Occupational Safety & Health Administration: Hafnium". U.S. Department of Labor. Retrieved 2008-09-10.
61. "CDC - NIOSH Pocket Guide to Chemical Hazards - Hafnium". www.cdc.gov. Retrieved 2015-11-03.

External links

• Hafnium at Los Alamos National Laboratory's periodic table of the elements
• Hafnium at The Periodic Table of Videos (University of Nottingham)
• Hafnium Technical & Safety Data
• NLM Hazardous Substances Databank – Hafnium, elemental
• Intel Shifts from Silicon to Lift Chip Performance
• Hafnium-based Intel 45nm Process Technology
• CDC - NIOSH Pocket Guide to Chemical Hazards