History of Chrysler

1936 Chrysler Airflow Series C-9

This article is about the history of Chrysler, an American automobile manufacturer.

History

Origins

Chrysler was founded by Walter Chrysler on June 6, 1925,[1] when the Maxwell Motor Company (est. 1904) was re-organized into the Chrysler Corporation.[2]

Walter Chrysler had originally arrived at the ailing Maxwell-Chalmers company in the early 1920s, having been hired to take over and overhaul the company's troubled operations (just after a similar rescue job at the Willys car company).[3]

In late 1923 production of the Chalmers automobile was ended.[4]

Then in January 1924, Walter Chrysler launched an eponymous automobile. The Chrysler 70[5] (also called the B-70[6]) was a 6-cylinder, designed to provide customers with an advanced, well-engineered car, at a more affordable price than they might expect. (Elements of this car are traceable back to a prototype which had been under development at Willys at the time Chrysler was there).[7]

Engineering innovations

The original 1924 Chrysler included a carburetor air filter, high compression engine, full pressure lubrication, and an oil filter, at a time when most autos came without all these features.[8] Among the innovations in its early years would be the first practical mass-produced four-wheel hydraulic brakes, a system nearly completely engineered by Chrysler with patents assigned to Lockheed. Chrysler pioneered rubber engine mounts to reduce vibration; Oilite bearings; and superfinishing for shafts.

Chrysler also developed a road wheel with a ridged rim, designed to keep a deflated tire from flying off the wheel. This safety wheel was eventually adopted by the auto industry worldwide.[9]

Following the introduction of the Chrysler, the Maxwell marque was dropped after the 1925 model year. The new, of lower-priced 4-cylinder Chryslers introduced for 1926 year were badge-engineered Maxwells.[10] The advanced engineering and testing that went into Chrysler Corporation cars helped to push the company to the second-place position in U.S. sales by 1936, a position it would last hold in 1949.

Early models

Vehicle marques

1931 Plymouth

In 1928, Chrysler Corporation began dividing its vehicle offerings by price class and function. The Plymouth brand was introduced at the low priced end of the market (created essentially by once again reworking and rebadging Chrysler's 4-cylinder model).[11] At the same time, the DeSoto marque was introduced in the medium-price field. Shortly thereafter, Chrysler bought the Dodge Brothers automobile and truck company and launched the Fargo range of trucks. By the late 1930s, the DeSoto and Dodge divisions would trade places in the corporate hierarchy. This proliferation of marques under Chrysler's umbrella might have been inspired by the similar strategy employed successfully by General Motors. Beginning in 1955, Imperial, formerly the top model of the Chrysler brand, became a separate make of its own,[12] and in 1960, the Valiant was introduced likewise as a distinct marque. In the U.S. market, Valiant was made a model in the Plymouth line and the DeSoto make was discontinued for 1961. With those exceptions per applicable year and market, Chrysler's range from lowest to highest price from the 1940s through the 1970s was Valiant, Plymouth, Dodge, DeSoto, Chrysler, and Imperial. After acquiring AMC in 1987, Chrysler fulfilled one of AMC's conditions of sale by creating the Eagle marque in 1988 to be sold at existing AMC-Jeep dealers.[13] The Eagle brand lasted a decade, being discontinued in 1998, while Plymouth was ended three years later.[14]

By 2001 and as of September 2009, the company had three marques worldwide: Dodge, Jeep, and Chrysler. Effective October 2009, however, a fourth brand was established with the creation of the Ram brand, a breakout from the Dodge marque. Initially, the new brand consisted of the Ram full-size pickup, Dakota compact pickup and the Sprinter van.[15] During the unveiling of Chrysler's business plan on November 5, CEO Sergio Marchionne indicated that the Ram brand will be augmented by Fiat-sourced vehicles, including a smaller van than the Sprinter, which itself would be replaced by a Fiat-based vehicle. In 2011, however, Fiat became Chrysler's fifth brand with the North American introduction of the Fiat 500.

Other marques

MoPar, Chryco, AutoPar

MoPar oil filter, 1956–1962 design

In the 1930s, the company created a formal vehicle parts division under the MoPar brand (a portmanteau of Motor Parts), with the result that "Mopar" remains a colloquial term for vehicles produced by Chrysler Corporation.

A tin of AutoPar-branded gasket sealer from the 1980s

The MoPar (later Mopar) brand was not used in Canada, where parts were sold under the Chryco and AutoPar brands, until the Mopar brand was phased into the Canadian market beginning in the late 1970s.

Canadian Chryco headlight bulb box from 1948; note circular DPCD logo

Many Chrysler Corporation vehicle parts also bore variants of the DPCD monogram, for Dodge-Plymouth-Chrysler-DeSoto, well after the 1961 end of DeSoto production.

Airtemp

Airtemp logo on window of air conditioned Chrysler Corp. vehicle

Chrysler's Airtemp marque for stationary and mobile air conditioning, refrigeration, and climate control was launched with the first installation in 1930's Chrysler Building, [16] though the Airtemp Corporation would not be incorporated until 1934, when it used a former Maxwell factory.

Airtemp invented capacity regulators, sealed radial compressors, and the self-contained air conditioning system, along with a superior high-speed radial compressor, and by 1941 had over 500 dealers selling its air conditioning and heating systems. The company supplied medical refrigeration units in World War II, and dominated the industry in the 1940s but slowly fell behind. By the 1970s Airtemp was losing money, and was sold to Fedders in 1976.[17] In 2012 the name was reborn as a Nordyne byproduct exclusively sold by the R.E. Michel Company.

Acustar

In the 1980s, Chrysler formed a subsidiary business called Acustar to sell parts to other automakers as well as supplying parts for Chrysler-built vehicles, similar to General Motors' creation of Delphi Corporation and Ford's later creation of Visteon.[18]

Safeguard

Safeguard brand on an automobile vent window made by PPG

Safeguard is Chrysler's brand for original and replacement auto glass, much of which, from 1958 through the mid-2000s, was made at Chrysler's McGraw glass plant, and some of which was manufactured for Chrysler by established glass companies.[19]

Airflow

In 1934 the company introduced the Airflow models, featuring an advanced streamlined body, among the first to be designed using aerodynamic principles. Chrysler created the industry's first wind tunnel to develop them. Buyers rejected its styling, and the more conventionally designed Dodge and Plymouth cars pulled the firm through the Depression years. Plymouth was one of only a few marques that actually increased sales during the cash-strapped thirties.

The unsuccessful Airflow had a chilling effect on Chrysler styling and marketing, which remained determinedly conservative through the 1940s and into the 1950s, with the single exception of the installation of hidden headlights on the very brief production run of 1942 DeSotos. Engineering advances continued, and in 1951 the firm introduced the first of a long and famous series of Hemi V8s.

The Forward Look

1955 Imperial car model shown on display at January 1955 Chicago Auto Show
1955 Chrysler - Philco all transistor car radio - "Breaking News" radio broadcast announcement.
All-transistor car radio, Chrysler Mopar model 914HR, with surface-barrier transistors inside.

In 1955 things brightened with the introduction of Virgil Exner's successful Forward Look designs, followed in 1956 by Chrysler's pioneering adoption of transistor radios in cars.[20] On April 28, 1955, Chrysler and Philco had announced the development and production of the world's first all-transistor car radio.[21] The Mopar model 914HR was developed and produced by Chrysler and Philco, and was an $150.00 "option" on the 1956 Imperial car models. Philco was the company that had manufactured the all-transistor car radio Mopar model 914HR, starting in the fall of 1955 at its Sandusky, Ohio plant, for the Chrysler corporation.[22][23][24] With the inauguration of the second generation Forward Look cars for 1957, Torsion-Aire suspension was introduced. This was not air suspension, but an indirect-acting, torsion-spring front suspension system which drastically reduced unsprung weight and shifted the car's center of gravity downward and rearward. This resulted in both a smoother ride and significantly improved handling. A rush to production of the 1957 models led to quality control problems including poor body fit and finish, resulting in significant and early rusting. This, coupled with a national recession, found the company again in recovery mode.

On September 28, 1957, Chrysler had announced the production of electronic fuel injection (EFI) to be available as an option on some of its new 1958 car models (Chrysler 300D, Dodge D500, DeSoto Adventurer, Plymouth Golden Commando V-8) that resulted with approximately 35 total installations.[25][26] Chrysler used the same all-transistor modulator "Electrojector" fuel injection system from Bendix Corporation that was withdrawn from public sale of the 1957 Rambler Rebel by American Motors because the system could not be made reliable.[27][28] Owners of EFI Chryslers were so dissatisfied that all but one were retrofitted with carburetors, while that one has been completely restored, with original EFI electronic problems resolved.[26]

Government programs

During World War II, essentially all of Chrysler’s facilities were devoted to building military vehicles. Chrysler ranked eighth among United States corporations in the value of wartime production contracts.[29] One of Chrysler’s most significant contributions to the war effort, however, was not in the field of vehicles but in the radar field. Chrysler made the converters for the Manhattan Project's K-25 gaseous diffusion plant in their Lynch Road plant in Detroit, after Dr Carl Heussner of the Chrysler plating laboratory solved the nickel plating problem.[30]

After the war. Chrysler continued with special projects for the Government; these were in the aerospace fields of missiles and space boosters.

Radar antennas

When the Radiation Laboratory at MIT was established in 1941 to develop microwave radars, one of the first projects resulted in the SCR-584, the most widely recognized radar system of the war era. This system included a parabolic antenna six feet in diameter that was mechanically aimed in a helical pattern (round and round as well as up and down).

For the final production design of this antenna and its highly complex drive mechanism, the Army’s Signal Corps Laboratories turned to Chrysler’s Central Engineering Office. There, the parabola was changed from aluminum to steel, allowing production forming using standard automotive presses. To keep weight down, 6,000 equally spaced holed were drilled in the face (this had no effect on the radiation pattern). The drive mechanism was completely redesigned, using technology derived from Chrysler’s research in automotive gears and differentials. The changes resulted in improved performance, reduced weight, and easier maintenance. A large portion of the Dodge plant was used in building 1,500 of the SCR-584 antennas as well as the vans used in the systems.[31][32]

Missiles

In April 1950, the U.S. Army established the Ordnance Guided Missile Center (OGMC) at Redstone Arsenal, adjacent to Huntsville, Alabama. To form OGMC, about 1,000 civilian and military personnel were transferred from Fort Bliss, Texas. Included was a group of German scientists and engineers led by Wernher von Braun; this group had been brought to America under Project Paperclip. OGMC designed the Army’s first short-range ballistic missile, the PGM-11 Redstone, based on the WWII German V-2 missile. Chrysler established the Missile Division to serve as the Redstone prime contractor, setting up an engineering operation in Huntsville and for production obtaining use from the U.S. Navy of a large plant in Warren, Michigan. The Redstone was in active service from 1958 to 1964; it was also the first missile to test-launch a live nuclear weapon, first detonated in a 1958 test in the South Pacific.[33]

Working together, the Missile Division and von Braun’s team greatly increased the capability of the Redstone, resulting in the PGM-19 Jupiter, a medium-range ballistic missile. In May 1959, a Jupiter missiles launched two small monkeys into space in a nose cone on a Jupiter; this was America’s first successful flight and recovery of live space payloads. Responsibility for deploying Jupiter missiles was transferred from the Army to the Air Force; armed with nuclear warheads, they were first deployed in Italy and Turkey during the early 1960s.[34]

In October 1950, K. T. Keller the president and chairman of the board of Chrysler was appointed part-time Director of Guided Missiles by President Truman to "make sense" of the missile program. Kenneth Nichols who had worked with him on the Manhattan Project was his assistant. They were to select missiles to be put into production and specify the number required, and give more priority to air defense missiles. The process of authorizing came to be known as “Kellerizing”, and once when the Navy objected to lower numbers than they desired being specified for their missile Keller refused to accept the Navy letter. He sent it back, saying he was willing to discuss the numbers but refused to reply in writing and get into the "Pentagon paper mill procedure" of "endless reviews and letter writing". He resigned in September 1953.[35]

Space boosters

In July 1959, NASA chose the Redstone missile as the basis for the Mercury-Redstone Launch Vehicle to be used for suborbital test flights of the Project Mercury spacecraft. Three unmanned MLRV launch attempts were made between November 1960 and March 1961, two of which were successful. The MLRV successfully launched the chimpanzee Ham and astronauts Alan Shepard and Gus Grissom on three suborbital flights in January, May and July 1961.

As America's manned space flight plans became more ambitious, Wernher von Braun's team designed the Saturn family of launch vehicles. With Chrysler's Huntsville operation then designated the Space Division, Chrysler became Marshall Space Flight Center’s prime contractor for the first (booster) stage of the Saturn I and Saturn IB vehicles. The Saturn I booster stage was designated S-I, which was upgraded to the S-IB for the Saturn IB. Chrysler based its fuel tank design on a cluster of its Redstone and Jupiter tanks, using four Redstone tanks to hold the RP-1 fuel and four to hold the liquid oxygen (LOX) oxidizer, around a central Jupiter LOX tank. Chrysler built these for the Apollo program in the Michoud Assembly Facility in East New Orleans, one of the largest manufacturing plants in the world.

Between October 1961 and July 1965, NASA launched four S-I boosters with dummy upper stages on suborbital test flights, followed by six complete Saturn Is on unmanned orbital flights. The last five of these tested boilerplate Apollo spacecraft, and the last three also carried Pegasus micrometeroid detection satellites. All flights were successful.

Between February 1966 and July 1975, NASA launched nine Saturn IBs on two suborbital flights and seven orbital flights (five of which were manned); all flights were successful.[36]

1960s

Starting in the 1960 model year, Chrysler built all their passenger cars with Unibody (unit-body or monocoque) construction, except the Imperials which retained body-on-frame construction until 1967. Chrysler thus became the only one of the Big Three American automakers (General Motors Corporation, Ford Motor Company, and Chrysler) to offer unibody construction on the vast majority of their product lines. This construction technique, now the worldwide standard, offers advantages in vehicle rigidity, handling, and crash safety, while reducing squeak and rattle development as the vehicle ages. Chrysler's contributions to the technology included the first use of computers to design unit-body cars, and the first setup where exterior sheet metal was not required for structural strength, making sheet metal replacement easier.[37]

Chrysler's new compact line, the Valiant, opened strong and continued to gain market share for over a decade. Valiant was introduced as a marque of its own, but the Valiant line was placed under the Plymouth marque for US-market sales in 1961. The 1960 Valiant was the first production automobile with an alternator (generating alternating current, paired with diodes for rectification back to direct current) rather than a direct current electrical generator as standard equipment. It proved such an improvement that it was used in all Chrysler products in 1961. The DeSoto marque was withdrawn from the market after the introduction of the 1961 models due in part to the broad array of the Dodge lines and the general neglect of the division. The same affliction plagued Plymouth as it also suffered when Dodge crept into Plymouth's price range. This would eventually lead to the demise of Plymouth several decades later. An ill-advised downsizing of the full-size Dodge and Plymouth lines in 1962 hurt sales and profitability for several years.

1966 Plymouth Barracuda

Partly to compensate for rust problems on the 1957 models and partly to ensure that their Unibody cars would remain safe, as rust was a larger problem when body panels were required for strength, Chrysler pioneered the use of electrostatic charges to improve anti-rust agent adhesion in their 1960 models. The company was also the first to use a seven-step rustproofing bath system, though not the first to use rustproofing baths.[37]

In April 1964, the Plymouth Barracuda, which was a Valiant sub-model, was introduced. The huge glass rear window and sloping roof were polarizing styling features. Barracuda was released almost two weeks before Ford's Mustang, making the Barracuda the first pony car. Even so, the Mustang outsold it 10-to-1 between April 1964 and August 1965. Perception of the Barracuda as nothing but a reskinned Valiant was not aided by sharing front-end sheetmetal.[38]

Chrysler's target buyers were obviously men, and attracting female buyers was not apparently a high priority, for a 1967 sales brochure proclaimed, "At last—specifications your wife can understand."[39] (This was, perhaps, an improvement over the Dodge La Femme option of 1955,[40] for it recognized women were at least reading the specifications.)

Expansion into Europe

Main article: Chrysler Europe

In the 1960s Chrysler expanded into Europe, attaining a majority interest in the British Rootes Group in 1964, Simca of France and Barreiros of Spain, to form Chrysler Europe. For the Rootes Group one outcome of this takeover was the launch of the Hillman Avenger in 1970 (briefly sold in the U.S. as the Plymouth Cricket), which sold in Britain alongside the rear-engined Imp and the Hunter. During the 1970s the former Rootes Group got into severe financial difficulties. The Simca and Barreiros divisions were more successful, but in the end the various problems were overwhelming and the firm gained little from these ventures. Chrysler sold these assets to PSA Peugeot Citroën in 1978, which in turn sold the British and Spanish truck production lines to Renault of France.

More successfully, at this same time the company helped create the muscle car market in the U.S., first by producing a street version of its Hemi racing engine and then by introducing a legendary string of affordable but high-performance vehicles such as the Plymouth GTX, Plymouth Road Runner, and Dodge Charger. The racing success of several of these models on the NASCAR circuit burnished the company's engineering reputation.

The 1970s

The 1970s were tumultuous for Chrysler since, like all the American car companies of the era, the company was reliant on a marketplace where cheap oil and smog-filled cities were the norm. As conditions changed, Chrysler could not adapt in time. Critics of government regulation have claimed that U.S. anti-trust laws prohibited U.S. automakers from forming Japanese- or European-style industry consortiums (which helped their foreign competitors to save costs). Chrysler was also slow to adopt to a gradual tightening of anti-pollution regulations. However, given that Chrysler's European divisions already had both the talent and the knowledge to make fuel-economic, less polluting vehicles, all that Chrysler's management had to do was to import European technology that it already owned. Chrysler's American difficulties, therefore, were largely the result of poor management.

Chrysler's lower sales volumes meant that new development and implementation costs made up a larger proportion of a vehicle's cost compared to Ford and General Motors. To avoid pricing themselves out of the market, Chrysler clumsily detuned its existing engines to meet emission requirements, which resulted in lower fuel economy at a time when fuel prices were rising. There was a rush of sales for the compact Dodge Dart and Plymouth Valiant, but the 1973 oil crisis sharply reduced demand for the large, fuel-thirsty vehicles Americans had previously bought in large number and which made up the bulk of Chrysler's product line.

At mid-decade, the company scored a conspicuous success with its first entry in the personal luxury car market, the Chrysler Cordoba. The hurried introduction of the Dodge Aspen and Plymouth Volaré in 1976 brought enormous warranty costs to repair faulty design and shoddy construction, and destroyed the longstanding loyalty built up by the Dart and Valiant predecessors. Chrysler Europe essentially collapsed in 1977, and was offloaded to Peugeot the following year, soon after having helped design the new Plymouth Horizon and Dodge Omni. In 1980, Chrysler Australia, which was producing the locally developed Chrysler Valiant and the Mitsubishi Galant based Chrysler Sigma, was sold to Mitsubishi Motors and changed its name to Mitsubishi Motors Australia Limited.[41] The subcompact Horizon was reaching the US market as the second gas crisis struck, devastating sales of Chrysler's larger cars and trucks, and the company had no strong compact line to fall back on.

Turbine

For many years, Chrysler developed gas turbine engines, which are capable of operating on a wide array of combustible fuels, for automotive use. Turbines were common in military vehicles, and Chrysler built many prototypes for passenger cars. In the 1960s, mass production seemed almost ready. Fifty Chrysler Turbine Cars, specialty designed Ghia-bodied coupes were built in 1962 and placed in the hands of consumers for final testing. After further development and testing to make emissions conform to 1970s-enacted EPA standards, the engines were planned as an option for the 1977 model LeBaron. However, Chrysler was forced to abandon the turbine engine as a precondition of U.S. government loan guarantees when the company experienced financial difficulties in the late 1970s.

Lee Iacocca's Impact

A Dodge Aries. The "K-cars" are generally credited with saving Chrysler from bankruptcy.
Main article: Lee Iacocca

In 1978, Lee Iacocca, recently fired from being Ford's executive, was aggressively courted and brought in as CEO. At the time, Chrysler was losing millions, largely due to recalls of the company's Dodge Aspen and Plymouth Volare, cars that Iacocca would later claim should never have been built. He began rebuilding the entire company from the ground up, laying off many workers, selling the loss-making Chrysler Europe division to Peugeot, and bringing in many former associates from his former company. Also from Ford, Iacocca brought to Chrysler the "Mini-Max" project, which would bear fruit in 1983 with the successful Dodge Caravan and Plymouth Voyager. Henry Ford II had wanted nothing to do with the Mini-Max, a restyled version of the minivan that Toyota was selling in huge numbers in Asia and Latin America, which doomed the project at Ford. Hal Sperlich, the driving force behind the Mini-Max at Ford had been fired a few months before Iacocca and was waiting for him at Chrysler, where the two would make automotive history. Iacocca proved to be a capable public spokesman, appearing in advertisements to advise customers that "If you find a better car, buy it." He would also provide a rallying point for Japan-bashing and instilling pride in American products. His book Talking Straight was a response to Akio Morita's Made in Japan.

Iacocca arrived shortly after the introduction of the subcompact Dodge Omni and Plymouth Horizon. The front-wheel drive Omni and Horizon became instant hits, selling over 300,000 units each in their debut year, showing what was to come for Chrysler. Ironically, the Omni and Horizon had been designed alongside the Chrysler Horizon with much input from the Chrysler Europe division of the company, which Iacocca axed in 1978.

1980s

Realizing that the company would go out of business if it did not receive a significant amount of money to turn the company around, Iacocca approached the United States Congress on September 7, 1979 and asked for US$1.5 billion in loan guarantees. Congress reluctantly passed the "Chrysler Corporation Loan Guarantee Act of 1979" Pub.L. 96–185 on December 20, 1979 (signed into law by President Jimmy Carter on January 7, 1980), prodded by Chrysler workers and dealers in every congressional district who feared the loss of their livelihoods. The military then bought thousands of Dodge pickup trucks which entered military service as the Commercial Utility Cargo Vehicle M-880 Series. With such help and a few innovative cars, Chrysler would manage to avoid bankruptcy and slowly recover.

After receiving this reprieve, Chrysler released the first of the K-Car line, the Dodge Aries and Plymouth Reliant, in 1981. Like the minivan which would come later, these compact automobiles were based on design proposals that Ford had rejected during Iacocca's (and Sperlich's) tenure there. Since they were released in the middle of the major 1980–1982 recession, these small, efficient and inexpensive, front-wheel drive cars sold rapidly.

Aside from small cars, Iacocca re-introduced the full sized Imperial as a company's flagship, new model had all of the newest technologies of the time – including fully electronic fuel injection (the first car in the U.S. to be so equipped) and all digital dashboard.

In February 1982 Chrysler announced the sale of Chrysler Defense, its profitable defense subsidiary to General Dynamics for US$348.5 million. The sale was completed in March 1982 for the revised figure of US$336.1 million.[42]

Chrysler also introduced the minivan, which was by and large Sperlich's "baby," in the fall of 1983, which led the automobile industry in sales for 25 years[43] Because of the K-cars and minivans, along with the reforms Iacocca implemented, the company turned around quickly and by 1983, was able to repay the government-backed loans[44] several years ahead of time, resulting in a profit of $350 million to the U.S. government.[45]

In 1987, it was discovered that Chrysler sold an estimated 32,750 cars that had been test-driven with disconnected odometers – some as much as 500 miles (800 km) – before being shipped to dealers. The controversy gained fire after the United States Senate got involved, as Senator Sam Nunn bought one of the Chryslers in question. Chrysler settled out of court with complainants.[46][47] Chrysler CEO Lee Iacocca sought to minimize damage to the corporation's public image by calling a news conference in which he termed the action "dumb" and "unforgivable".

A joint venture with Mitsubishi called Diamond Star Motors strengthened the company's hand in the small car market. Chrysler also acquired American Motors Corporation (AMC) in 1987, primarily for its Jeep brand, although the failing Eagle Premier would be the basis for the Chrysler LH platform sedans. This bolstered the firm's size, but the American Motors purchase was saddled with $900 million in debt.[48] Also, Chrysler was still the weakest of the Big Three. In 1987, Chrysler surprised the industry by purchasing Italian sports car maker Lamborghini, with the acquisition heavily driven by Iacocca. Lamborghini would subsequently be sold off in 1994.

Iacocca received much credit for Chrysler's turnaround from near bankruptcy, with his commercials giving him celebrity status, and some mentioned him as a potential U.S. presidential candidate in 1988. However the latter part of his tenure from 1988 onwards was less successful. The acquisitions of Gulfstream Aerospace, Electrospace Systems, and other companies was intended to protect Chrysler from the cyclical nature of the auto industry but they shrunk the company's working capital from $14.3 billion to just $1.7 billion. In addition Iacocca enjoyed being in the spotlight and gradually isolated himself from his "Gang of Ford" managers that he had brought over from Ford Motor Company. By 1992, the board pushed Iacocca to retire, albeit with a generous severance package.[49]

Iacocca was also responsible for Chrysler's acquisition of AMC in 1987, which brought the profitable Jeep division under Chrysler's corporate umbrella. It also created the short-lived Eagle division, formed from the remnants of AMC. By this time, AMC had already finished most of the work with the Jeep Grand Cherokee, which Iacocca desperately wanted. The Grand Cherokee would not be released until 1992 for the 1993 model year. That same year, Iacocca stepped down as CEO and Chairman of Chrysler at the end of 1992, being succeeded in these posts by Robert Eaton.

Although Robert Lutz, currently the President of Chrysler, was the second-ranking executive in the company, he earlier opposed the merger with Fiat that Iacocca had championed. Due to their feud, Iacocca convinced the board to pass over Lutz for the chairmanship of Chrysler. However, Eaton and Lutz did develop a strong working relationship.[49]

1990s

1998–2004 LH platform-based Dodge Intrepid

In the early 1990s, Chrysler made its first steps back into Europe, setting up car production in Austria, and beginning right hand drive manufacture of certain Jeep models in a 1993 return to the UK market. The continuing popularity of Jeep, bold new models for the domestic market such as the Dodge Ram pickup, Dodge Viper (badged as "Chrysler Viper" in Europe) sports car, and Plymouth Prowler hot rod, and new "cab forward" front-wheel drive LH sedans put the company in a strong position as the decade waned.

In 1988, Chrysler and Fiat, owner of Alfa Romeo, reached an agreement that named Chrysler to be the exclusive distributor for Alfa Romeo in North America and easily allow Chrysler dealers to sell Alfa products, which lasted until Alfa left the United States in 1995. The initial contact between the two firms would lead to high-level talks in 1990 between Iacocca and Fiat Chairman Giovanni Agnelli about establishing joint ventures in the United States and Europe, and the possibility of Fiat taking a large equity stake in Chrysler. However, talks dragged on and eventually broke off. Ironically, Fiat would acquire a majority stake in Chrysler following its 2009 restructuring.

In 1991, Chrysler began the process of moving its corporate headquarters from its 1925 founding location of Highland Park, Michigan, to nearby Auburn Hills. The move was complete by 1993.

In 1995, former CEO Lee Iacocca assisted in billionaire Kirk Kerkorian's hostile takeover of Chrysler, which was ultimately unsuccessful. The next year, Kerkorian and Chrysler made a five-year agreement that includes a gag order preventing Iacocca from speaking publicly about Chrysler.[50]

Chrysler was among the companies boycotted by gay rights groups after removing advertisements from the ABC sitcom Ellen in 1997, which it deemed "controversial."[51]

DaimlerChrysler 1998–2007

Further information: Daimler AG
2005–2010 Chrysler 300

In 1998 Daimler-Benz and Chrysler had formed a 50–50 partnership. Chrysler Corporation then was legally renamed DaimlerChrysler Motors Company LLC, while its total operations began doing business as Chrysler Group. This was initially declared to be a merger of equals, but it became evident that once Chrysler Chairman and CEO Bob Eaton retired, that Daimler would take majority control.[52] Other executives like President Thomas T. Stallkamp, once considered the heir-apparent of Eaton, and Vice-Chairman Robert Lutz were soon forced out. Eaton, Stallkamp, and Lutz had been described as the "triumvirate" responsible for Chrysler's successes in the late 1990s, with much credit going to Lutz's platform design teams.[53] Daimler-Benz got the remainder of Chrysler, excluding the Eagle brand, which was facing extinction at the time.

Then-Daimler-Benz CEO Juergen Schrempp had "promised a marriage made in heaven and huge synergies". But Martin H. Wiggers' concept of a platform strategy like the VW Group, was implemented only for a few models, so the synergy effects in development and production were too low.[54] However, it proved to be a disaster for Daimler, which poured billions of dollars into Chrysler, draining management and resources, and repeatedly dragging down its Mercedes-Benz luxury vehicle subsidiary. Chrysler President James P. Holden was responsible for misjudging the launch of the all-new 2001 minivan that resulted in an expensive surplus of 2000 models, losing considerable market share to rivals (Chrysler had created and long dominated the minivan market), and also underestimated demand for the surprisingly popular PT Cruiser, resulting in a $512 million third-quarter loss in 2000 that led to his firing later that year. [55][56]

Dieter Zetsche was appointed CEO of the Chrysler Group in 2000. The Plymouth brand was phased out in 2001, and plans for cost cutting by sharing of platforms and components began. The Mercedes-Benz SLK-Class-based Chrysler Crossfire coupé/roadster and the Chrysler Pacifica three-row crossover were among the initial results of this plan; the Crossfire was unsuccessful while the Pacifica started strong but faded after a few years. A return to rear-wheel drive was announced for a new line of full size cars, spearheaded by the Chrysler 300 and Dodge Magnum which used some Mercedes-Benz W211 components and offered a new HEMI V8 engine as a performance option. While the Magnum received a tepid reception in the market, the 300 garnered much attention and sold well.[57] The partnership with Mitsubishi was dissolved as DaimlerChrysler divested its stake in the firm. Financial performance improved and Chrysler was generating a significant part of Daimler-Chrysler's profits from 2004 to 2005, as the other subsidiary, Mercedes-Benz, incurred costs for restructuring. By 2005, Chrysler was said to be the healthiest of the Detroit Three automakers (compared to General Motors and Ford Motor Company).[55][58]

As a result of Zetsche's apparent success in a turnaround of Chrysler, Juergen Schrempp, the CEO of parent company Daimler-Chrysler, was pressured to retire early. Zetsche was elevated to CEO of Daimler-Chrysler on January 1, 2006, and Thomas W. LaSorda became President and CEO of Chrysler Group. However, in 2006, while DCX's other subsidiary Mercedes-Benz turned a profit, Chrysler swung to a loss and analysts believed that the profitable years of 2004–05 would be unlikely to be return in the future. That led to suggestions that the eight-year merger would come to an end, as Mercedes (which made up around 33% of Daimler's $200 billion in 2006 revenues) did not get any competitive boost from Chrysler, and that Daimler would be a stronger and more profitable group without the U.S. unit. Zetsche admitted that Chrysler offered no serious scale of advantages, though he initially insisted a spinoff was not being considered and said that management's first priority is to fix the problems at Chrysler by trimming production and redoubling efforts to boost its competitiveness.[55][58]

Some suggest that Zetsche's tenure was a mixed success, with Chrysler still relying heavily on gas-guzzling SUVs, and most of its product lineup was unsuccessful, despite using Mercedes-derived technologies. Despite radical restructuring and improved models, analysts said that it was difficult to expect a solid recovery at Chrysler, due to the negative dynamics of the U.S. auto market and Chrysler's legacy labor and health care costs. In 2006, Zetsche had starred in the "Dr. Z" ad campaign which cast him as an all-knowing, German-accented wizard of the auto industry, in TV spots and a website. The strategy was to communicate that Chrysler was backed up by the same Teutonic know-how and discipline that has long made Mercedes-Benz one of the world's most prestigious brands. However, the campaign was moth-balled in 2007. Eight years since the merger, most customers did not know that Chrysler was owned by the same company that also produces Mercedes-Benz luxury cars. Some surveyed thought Zetsche was so smooth on screen—even to the point of head-butting a soccer ball perfectly in one take—that he was an actor and not the actual CEO.[55][58]

Chrysler sale to Cerberus 2007–2009

Second generation Chrysler Sebring sedan

According to the April 2007 issue of Der Spiegel, CEO Dieter Zetsche expressed a desire to dismantle Chrysler and sell off the majority stake and at the same time keep Chrysler "dependent" upon Mercedes-Benz after the sale. On April 4, 2007, Zetsche said that the company was negotiating the sale of Chrysler, which was rumored for weeks before the announcement. The following day investor Kirk Kerkorian placed a 4.5 billion dollar bid for Chrysler. On April 12, Magna International of Canada announced it was searching for partners to place a bid for Chrysler. Magna's offer was later outbid.

DaimlerChrysler AG announced on May 14, 2007 that it would sell 80.1% of its stake in the Chrysler Group to Cerberus Capital Management for US$7.4 billion.[59] Chrysler Group (DaimlerChrysler Corporation) would officially become Chrysler Holding LLC (changed to Chrysler LLC upon completion of the sale), with two subsidiaries – Chrysler Motors LLC (new name of DaimlerChrysler Motors Company), which produces Chrysler/Dodge/Jeep vehicles, and Chrysler Financial Services LLC (new name of DaimlerChrysler Financial Services Americas LLC), which took over the operations of Chrysler Financial. DaimlerChrysler AG changed its name to Daimler AG.[60]

Chrysler LLC unveiled a new company logo, a variation of the previously used Pentastar logo, and launched its new website on August 6, 2007. Robert Nardelli became Chairman and CEO.[61] In the resulting management shuffle, LaSorda was relegated to the number two position as President and Vice Chairman of Chrysler LLC,[62] Jim Press, previously President of Toyota Motor Sales, U.S.A., Inc., was appointed Co-President and Vice Chairman.[63] While LaSorda's titles at Chrysler LLC officially stated that he was in charge of manufacturing, procurement and supply, employee relations, global business development and alliances, his actual role in the company was largely to find a new partner or buyer for Chrysler. Cerberus Capital was said to be less interested in rebuilding the auto manufacturer as a long-term investment, rather it was focused on turning a short-term profit though a leveraged buyout.[64]

The new company experienced its first labor dispute on October 10, 2007. A strike deadline of 11 am had been set by the United Auto Workers (UAW) union leadership pending successful negotiation of a new contract patterned after the pact with GM. As the talks progressed past the deadline, most Chrysler unionized workers walked off their jobs. With media speculation about the impact of a long strike, an impromptu announcement after 5 pm the same day indicated that a tentative agreement had been reached, thus ending the walkout after just over six hours.[65]

Chrysler collaborates with Tata Motors Limited of India: Tata's all-electric Ace mini truck will be sold through Chrysler's Global Electric Motorcars division. Chrysler announced in February 2008 that it would be reducing its product line from 30 models to 15 models.[66] Chrysler was reported in August 2008 to be in talks with Fiat.[67]

2008 financial crisis

In October 2008, Cerberus and General Motors discussed an exchange of GM's 49% stake in GMAC for Chrysler, potentially merging two of Detroit's "Big Three" automakers.[68] These talks did not come to fruition, and were discontinued the next month.[69] On October 24, 2008, Chrysler announced a 25% cut (5,000 jobs) in its salaried and contract workforce in November 2008.[70] Michigan Gov. Jennifer Granholm announced that she, along with 5 other governors, sent a letter to Treasury Secretary Henry Paulson and Federal Reserve Chairman Ben Bernanke requesting emergency funding for the Detroit Big Three Automakers. On the same day, General Motors asked the Treasury Department of the United States for $10 billion to help restructure both their company and possible future sibling, Chrysler so that in turn, they can become one massive company.

On October 23, 2008, Daimler announced that its stake in Chrysler had a book value of zero dollars after write offs and charges.[71]

On November 5, 2008 it was published that Chrysler sales in the US market have fallen 34.9 percent in only 12 months.[72] A week later, Chrysler CEO Robert Nardelli said, in a speech at an Ernst & Young conference, that the company can only remain viable by forming an alliance with another automaker, domestic or global, as well as receiving government assistance in the form of an equity stake.[73] Several days later, Chrysler together with Ford and General Motors, sought financial aid at a Congressional hearing in Washington D.C. in the face of worsening conditions caused by the automotive industry crisis. All three companies were unsuccessful and were invited to draft a new action plan for the sustainability of the industry.[74]

At the beginning of December 2008, amid the 2008 automobile crisis, Chrysler announced that they were dangerously low on cash and may not survive past 2009. After the defeat of the auto bailout in the Senate, Chrysler stated that they would most likely file for bankruptcy and shut down all operations permanently. On December 17, 2008, Chrysler announced that it planned to halt production at all 30 of its manufacturing plants through January 19, 2009. In addition, Chrysler Financial announced that it would charge fees on dealers holding inventories of new cars and trucks that are unsold after more than 360 days, and will require immediate payment of all remaining balances on inventories of used vehicles that remain unsold after six months.[75] On December 19, President George W. Bush announced a $13.4 billion rescue loan for the American automakers, including Chrysler.

Chrysler's 2008 performance was hard hit among the Big Three U.S. automakers,[76] with 398,119 automobiles and 1,055,003 trucks sold during the year.

On March 13, 2009, LaSorda told the Canadian House of Commons finance committee that the initial GM-CAW deal was insufficient and that Chrysler would demand an hourly wage cut of $20, breaking the Canadian Autoworkers's negotiating pattern set by GM. He suggested that Chrysler may withdraw from Canada if it fails to achieve more substantial cost savings from the CAW. Fiat CEO Sergio Marchionne had also threatened to walk away from the merger if the CAW did not make sufficient concessions to match the wages of the "transplants" (foreign automaker's US and Canadian plants), which the union eventually agreed to by cutting benefits. Chrysler LLC has since filed for bankruptcy, though Fiat would continue to implement the strategic alliance. [77] [78] [79]

On March 7, 2009, Chrysler Vice-Chairman Jim Press stated that current sales volume is sufficient to keep the company going as sales should rise in the coming months. The Chrysler executive also noted the automaker’s February retail sales were better than Ford’s as Chrysler continued to curtail lower-margin fleet sales. He also said the volumes being forecast for 2009 are within the estimates Chrysler envisioned in preparing its viability plan for the federal government.[80]

On March 30, 2009, the White House announced it would provide an additional $6 billion in further support to Chrysler contingent on the company finalizing an alliance with Fiat before the end of April .[81]

US Government backing of warranties

On March 30, 2009 President Barack Obama issued a US Government guarantee of Chrysler's warranty liabilities, and publicly stated the U.S. Government will back the warranties on Chrysler vehicles if the company were to go out of business.[82]

Chapter 11 reorganization

On January 20, 2009, Fiat S.p.A. and Chrysler LLC announced that they have a non-binding term sheet to form a global alliance. Under the terms of the potential agreement, Fiat could take a 35% stake in Chrysler and gain access to its North American dealer network in exchange for providing Chrysler with the platform to build smaller, more fuel-efficient vehicles in the US and reciprocal access to Fiat's global distribution network.[83]

By mid-April, as talks intensified between the two automakers to reach an agreement by a government-imposed deadline of April 30, Fiat's initial stake was reported to be 20% with some influence on the structure of top management of the company.[84] However, Fiat has warned that the merger would not take place if Chrysler fails to reach an agreement with the UAW and the Canadian Auto Workers' Union. On April 26, 2009, it appeared as if Chrysler had reached a deal with the unions which would meet federal requirements, though details were not made available. Chrysler said the union agreement “provides the framework needed to ensure manufacturing competitiveness and helps to meet the guidelines set forth by the U.S. Treasury Department.”[85] Chrysler filed for chapter 11 bankruptcy protection at the Federal Bankruptcy Court of the Southern District of New York, in Manhattan, on April 30, 2009, and announced an alliance with Fiat.[86][87]

Both the White House and Chrysler expressed hope for a "surgical" bankruptcy lasting 30 to 60 days, with the result of reducing the company's liabilities and post-bankruptcy emergence in stronger financial shape. The submitted court documents indicated that there would be a reorganization plan presented to the court in 120 days, on August 28, 2009. A White House official indicated that the government would provide debtor-in-possession financing for between $US 3 billion to $US 3.5 billion, and upon a completion of Chrysler bankruptcy restructuring and court proceedings, the company would be eligible to receive up to $US 4.5 billion in financing to resume operations, for total of $US 8 billion of government support. Prior to the bankruptcy filing, Chrysler had received $US 4.5 billion in financing from the U.S. government, under a George W. Bush administration plan, in December 2008, after Congress declined to approve legislation to provide federal loans. Chrysler announced on the day of the bankruptcy filing, that during the restructuring, it would cease most manufacturing operations on May 4, 2009, and resume production “when the transaction is completed, which is anticipated within 30 to 60 days.”[87][88]

On May 1, 2009, Chrysler LLC filed for bankruptcy, and LaSorda stepped down as President and Vice-Chairman and retired, despite Fiat urging him to stay on.[64]

On May 14, 2009 Chrysler filed with the bankruptcy court to terminate the dealership agreements of 789, or about 25% of its dealerships.[89]

On June 1, 2009 a US bankruptcy court approved a plan which spells out that the new Chrysler company called "Chrysler Group LLC".[90][91] The VEBA formed by the United Auto Workers Union to provide health care for Chrysler retirees will hold 55%. Minority stakes will be held by Fiat (20%) and the US (8%) and Canadian (2%) governments. Fiat has stated it plans to increase its share to 35% if Chrysler meets certain goals.[92]

On June 8, 2009, Supreme Court Associate Justice Ruth Bader Ginsburg, who is assigned to emergency motions arising from the United States Appeals Court for the Second Circuit, in a one-sentence order, stayed the orders of the bankruptcy judge allowing the sale, pending further order by Justice Ginsburg or the Supreme Court.[93]

On June 9, 2009, the Supreme Court published its denial of the applications for a stay of the sale from the three Indiana funds, allowing the sale of assets to "New Chrysler" to proceed.[94][95] According to the two page decision and order, the Indiana funds “have not carried the burden” of demonstrating that the Supreme Court needed to intervene.[94] The U.S. Department of the Treasury issued a statement saying: “We are gratified that not a single court that reviewed this matter, including the U.S. Supreme, found any fault whatsoever with the handling of this matter by either Chrysler or the U.S. government.”[94] The proposed sale of assets is scheduled to close on Wednesday, June 10, 2009, when the money to finance the deal is wired by the government. Fiat will receive equity in the New Chrysler through its contribution of automobile platforms as a base for a new line of Chrysler cars.[94]

On June 10, 2009, 41 days after filing for bankruptcy protection, the sale of most of Chrysler assets to "New Chrysler", formally known as Chrysler Group LLC, was completed. The federal government financed the deal with US$6.6 billion in financing, paid to the "Old Chrysler", formally called Old Carco LLC.[96] The transfer does not include eight manufacturing locations, nor many parcels of real estate, nor equipment leases. Contracts with 789 U.S. auto dealerships, who are being dropped, were not transferred.[97]

Fiat will sell its own models – such as this Fiat Nuova 500 – through Chrysler in the United States

Fiat initially owned a minority 20% stake of Chrysler Group LLC with the option of taking additional equity up to a 35% stake if certain operational and capitalization goals were achieved. The United Auto Workers’ union retiree health care trust fund (Volunteer Employee Benefit Association) was the majority owner, with 55 percent when Fiat reached its target holding of 35%. The U.S. and Canadian governments initially held minority stakes of 8% and 2%, respectively, of the new Chrysler.[97]

On May 24, 2011, Fiat paid back $7.6 billion in U.S. and Canadian government loans.[98] On July 21, Fiat bought the Chrysler shares held by the United States Treasury. With the purchase, Chrysler once again became foreign owned; this time Italian car maker Fiat gained majority ownership and control of Chrysler.[99] The United States government’s involvement in the Chrysler bankruptcy cost the U.S. taxpayer $1.3 billion.[99]

Chrysler Group

Lancia Delta to be marketed in the USA as the Chrysler Delta

In early 2009, Chrysler Group, based in Auburn Hills, Michigan, became majority owned by the United Auto Workers Voluntary Employee Beneficiary Association trust. In June 2009 Fiat gained ownership of Chrysler Group as a part of Chrysler's restructuring plan, and eventually gained 58% total stake in the company.[100] Fiat stated plans for the Chrysler brand and Lancia to codevelop products, with some vehicles being shared. Olivier Francois, Lancia's CEO, took over as CEO of the Chrysler division in October 2009. Fiat has stated that, depending on the market, some Chrysler cars will be sold as Lancias and vice versa. Francois plans to reestablish the Chrysler brand as an upscale brand, a position somewhat muddied since the K-car era in the 80's, and especially after the Plymouth brand was discontinued.[101] At the 2010 Detroit Auto Show, A Chrysler badged Lancia Delta was on display, likely the first Lancia to be sold as a Chrysler and possibly as a replacement for the Chrysler PT Cruiser.[102] Dodge, Jeep, Chrysler get makeover by refreshing, redesigning or replacing every car and truck, swapping out engines and creating vehicles people want.[103][104]

On 16 December 2014, Chrysler Group LLC announced a name change to FCA US LLC.[105]

Timeline of Chrysler

Logos

Medallion logo

With its inception in 1925, Chrysler's logo was a round medallion with a ribbon bearing the name CHRYSLER in uppercase block letters

Forward Look

Forward Look logo emblem on 1957 Dodge D100 pickup truck

Virgil Exner's radical "Forward Look" redesign of Chrysler Corporation's vehicles for the 1955 model year was underscored by the company's adoption of a logo by the same name. The Forward Look logo consisted of two overlapped boomerang shapes, suggesting space age rocket-propelled motion.

Pentastar

Pentastar

As the Forward Look styling cycle was ending, Chrysler President Lynn Townsend sought a new logo usable by all of Chrysler's worldwide divisions and subsidiaries, automotive and non-automotive, on packaging, stationery, signage and advertising. He wanted something that would be immediately identifiable as Chrysler's mark to anyone who saw it, in any culture. In September 1962, the company adopted a logo named Pentastar, made of five triangles arranged so their bases formed the sides of a pentagon. The gaps in between the triangles formed a star in the middle of the pentagon. The Pentastar was simple and easily recognizable, even on revolving signs, and was not tied to any particular automotive styling feature as had been the previous Forward Look logo. Because the symbol contained no text, it facilitated Chrysler's expansion in international markets. The Pentastar was extensively used on dealer signage, advertisements, and promotional brochures, as well as on Chrysler products themselves.[106]

Pentastar on body cladding of 1993–98 Jeep Grand Cherokee

Chrysler-Plymouth literature, advertisements, and dealership signage used a blue Pentastar or a white one on a blue background, while Dodge used a red Pentastar or a white one on a red background. Divisional logos such as Dodge's Fratzog were gradually phased out until, by 1981, all Chrysler divisions used only the Pentastar. All vehicle brands and all the other Chrysler divisions and services—air conditioning systems, heating, industrial engines, marine engines, outboard motors, boats, transmissions, four-wheel drive systems, powdered metal products, adhesives, chemical products, plastics, electronics, tanks, missiles, leasing, finance and auto parts—were identified by the Pentastar.

The Pentastar logo was placed on the lower passenger-side fender of all Chrysler products, including non-US brands, from 1963 into the 1972 model year. It was placed on the passenger-side fender so it could be viewed by passers-by, a subtle method of getting the symbol ingrained in the public's mind: a nameplate has to be read, but a symbol is quickly recognizable without reading. Thus left-hand drive cars had the Pentastar on the right fender, while right-hand drive cars had it on the left. Starting in the 1980s, hood ornaments on Chrysler-brand vehicles used a gem-like version of the pentastar to signify the brand's upscale status.

The Pentastar's final badging appearance was on rare versions of the 1996 Plymouth Voyager. It was also applied to the steering wheel, keys, and fenders of the Voyager and the other Chrysler NS minivans into 2000.

The Pentastar continued to represent Chrysler until the merge with Daimler in 1998, when it was retired. Among the few remaining traces of this motif was a large, star-shaped window at DaimlerChrysler's American headquarters in Auburn Hills, Michigan, and pentastar aviation, a former DaimlerChrysler subsidiary which reverted to its original name after being purchased by a member of the Ford family. Many dealerships still have signage and other traces still visually apparent to the Pentastar, where a five-Pentastar logo remains in use as the logo of the "Five Star Dealer" service rank.[107]

Despite having been officially retired under Daimler, the Pentastar continued to be used as the identifying trademark or logo on Chrysler Group parts, as seen on window glass, on individual components, molded plastic assemblies, and larger parts such as (reportedly) engine blocks.

The Pentastar was officially reintroduced in 2007;[108] however, was replaced with the stylized letters "FCA" for Fiat Chrysler Automobiles in 2014.[109]

The Pentastar is also used as the badge of the United States Army's V Corps.

Return of divisional logos

Divisional logos began to supplant the companywide Pentastar application in the early 1990s. The Dodge division phased in a ram's-head logo beginning with the 1993 Intrepid and Spirit. The Chrysler brand began using a medallion based on its original logo starting with the 1995 Cirrus, Concorde, and Sebring. This logo was applied to all Chryslers by 1996. That same year, Plymouth adopted a new sailboat logo, which was a simplified version of the brand's pre-Pentastar Mayflower ship logo.

Winged logo

Chrysler "winged" logo, used on Chrysler division cars 1996–2010

The design shown here is an adaptation of the original medallion logo which Chrysler used on its cars at its inception in 1925. The logo was revived for the Chrysler division in 1996, and is often surrounded by a pair of silver wings. When sold to Cerberus, Chrysler readopted the Pentastar (see above) as their corporate logo, although the winged logo is still used on the cars themselves.

Revival of Pentastar

Chrysler Group LLC logo
Chrysler division logo

On May 17, 2007, an internal email stated that Chrysler was going to revive the Pentastar logo, in updated form, after their split from Daimler.[110] The new three-dimensional Pentastar was formally introduced when Chrysler LLC began doing business as a private company in August 2007. Chrysler cars retained a modified version of the winged logo.

Elimination of the Pentastar

With the formation of Fiat Chrysler Automobiles in 2014, the stylized letters "FCA" replaced the Pentastar as the official logo. The move angered several Chrysler fans who spawned a Facebook page and a petition drive to save it.[109]

See also

Notes

  1. ↑ Lockwood, Cliff (October 18, 1968). "Early Chrysler Corporate History: 1903 – 1928". Chrysler Club pages. Retrieved June 28, 2010.
  2. ↑ "A Brief Look at Walter P. Chrysler". WPC News.
  3. ↑ Kimes, Beverly R.; Clark, Jr., Henry A., eds. (1996). Standard Catalog of American Cars 1805–1942. Krause Publications. p. 292. ISBN 978-0-87341-428-9.
  4. ↑ Kimes, p. 257.
  5. ↑ Csere, Csaba (January 1988). "10 Best Engineering Breakthroughs". Car and Driver 33 (7): 60.
  6. ↑ "1924 Chrysler Model B-70", How Stuff Works, retrieved 2015-12-29
  7. ↑ Kimes, pp. 292, 1498.
  8. ↑ Zatz, David. "Chrysler Technological Innovations". allpar.com. Retrieved 4 March 2013.
  9. ↑ Zatz, David. "Chrysler Technological Innovations". allpar.com. Retrieved 4 March 2013.
  10. ↑ Kimes, pp. 292–293, 901.
  11. ↑ Kimes, pp. 296, 1156.
  12. ↑ "Imperial Marque History". Imperialclub.com. 19 September 2011. Retrieved 29 July 2013.
  13. ↑ Auto Editors of Consumer Guide (June 18, 2007). "How Eagle Cars Work". Auto.howstuffworks.com. Retrieved November 20, 2010.
  14. ↑ "Chrysler Corporation Brands, Subsidiaries, and Related Companies". allpar.com. Retrieved 4 March 2013.
  15. ↑ "Chrysler Group LLC Reports October 2009 U.S. Sales Increase Compared with September 2009" (Press release). Chrysler.com. 3 November 2009. Retrieved 4 March 2013.
  16. ↑ "Airtemp: Chrysler's Airy Solution to the Long, Hot Summer". Imperial Club. Retrieved 4 March 2013.
  17. ↑ Zatz, David. "A Brief History of Chrysler Airtemp". allpar.com. Retrieved 4 March 2013.
  18. ↑ Holusha, John (4 March 1988). "Chrysler to Keep Acustar But Plants Will Be Dropped". The New York Times. Retrieved 4 March 2013.
  19. ↑ "D.O.T. Numbers, auto glass marking decoder". Glasslinks.com. Retrieved 4 March 2013.
  20. ↑ Flory, J. Kelly (2008). American Cars 1946–1959: Every Model Year by Year. McFarland. p. 701. ISBN 978-0-7864-3229-5.
  21. ↑ Wall Street Journal, "Chrysler Promises Car Radio With Transistors Instead of Tubes in '56", April 28th 1955, page 1
  22. ↑ Hirsh, Rick. "Philco's All-Transistor Mopar Car Radio". Allpar.com. Retrieved 29 July 2013.
  23. ↑ "Mopar 914-HR Ch= C-5690HR Car Radio Philco, Philadelphia". Radiomuseum.org. Retrieved 29 July 2013.
  24. ↑ Walter P. Chrysler Museum, http://www.chryslergroupllc.com/company/Heritage/Pages/Chrysler-Heritage-1950.aspx
  25. ↑ "New Chrysler Fuel System Is Introduced". Chicago Daily Tribune. 29 September 1957. p. A9.
  26. 1 2 Mattar, George. "1958 DeSoto Electrojector - World’s First Electronic Fuel Injection?". Allpar.com. Retrieved 29 July 2013.
  27. ↑ Walton, Harry (March 1957). "How Good is Fuel Injection?". Popular Science 170 (3): 88–93. Retrieved 29 July 2013.
  28. ↑ Kendall, Leslie. "American Musclecars: Power to the People". Petersen Automotive Museum. Archived from the original on 4 October 2013. Retrieved 29 July 2013.
  29. ↑ Peck, Merton J.; Scherer, Frederic M. (1962). The Weapons Acquisition Process: An Economic Analysis. Harvard Business School. p. 619.
  30. ↑ Nichols, Kenneth (1987). The Road to Trinity: A Personal Account of How America’s Nuclear Policies Were Made. New York: William Morrow. pp. 95–96. ISBN 068806910X.
  31. ↑ Stout, Wesley W.; The Great Detective, Chrysler Corporation, 1946
  32. ↑ Colton, Roger B.; "Radar in the United States Army," Proc. IRE, vol. 33, p. 749, 1947
  33. ↑ Bullard, John W.; “History Of The Redstone Missile System,” Historical Monograph Project Number: AMC 23 M. Historical Division, Army Missile Command
  34. ↑ Fact Sheet: Chrysler SM-78/PGM-19 Jupiter, National Museum of the U.S. Air Force; http://www.nationalmuseum.af.mil/factsheets/factsheet.asp?id=534
  35. ↑ Nichols, Kenneth (1987). The Road to Trinity: A Personal Account of How America’s Nuclear Policies Were Made. New York: William Morrow. pp. 281–288. ISBN 068806910X.
  36. ↑ Bilstein, Roger E.; Stages to Saturn: A Technological History of the Apollo/Saturn Launch Vehicles; NASA SP-4206, 1980, ISBN 0-16-048909-1; http://history.nasa.gov/SP-4206/sp4206.htm
  37. 1 2 Zatz, David. "Chrysler moves to Unibody (unit-body construction): 1960". allpar.com. Retrieved 4 March 2013.
  38. ↑ Flory, p. 319.
  39. ↑ Flory, p. 531.
  40. ↑ Flory, p. 644.
  41. ↑ "Chrysler Australia". uniquecarsandparts.com.au. Retrieved 29 July 2013.
  42. ↑ "Chrysler Unit Sold". The New York Times Company. March 17, 1982.
  43. ↑ "After a Quarter Century, Dodge Loses Minivan Crown to Honda". Fox News. January 6, 2009. Retrieved January 13, 2009.
  44. ↑ Hickel, James K. (July 3, 1983). "The Chrysler Bail-Out Bust". The Heritage Foundation. Retrieved December 5, 2008. "[Chrysler] could announce today that it will pay off the remaining $800 million by September ."
  45. ↑ Gill, Kathy. "What Was The Chrysler Bailout?". about.com. Retrieved 4 March 2013.
  46. ↑ Chrysler Fined for Safety ViolationsNew York Times, July 12, 1987
  47. ↑ Chrysler to Pay Some 40,000 Owners in SettlementNew York Times, Aug 24, 1988
  48. ↑ S.C. GWYNNE;John F. McDonald/Washington (March 5, 1990). "Time Magazine". Time. Retrieved December 21, 2010.
  49. 1 2 "Martin Puris - Comeback". Scribd.com. Retrieved 2013-03-04.
  50. ↑ Special Reports: Timeline: The career of Lee Iacocca. – Detroit News. – March 17, 2002.
  51. ↑ Gallagher, John (June 10, 1997). "The ad buck stops here – controversy on gays and advertising". The Advocate. Archived from the original on January 31, 2005. Retrieved November 7, 2007.
  52. ↑ Vlasic, Bill; Stertz, Bradley A. (2000). Taken for a Ride: How Daimler-Benz Drove off with Chrysler. William Morrow. ISBN 0-688-17305-5.
  53. ↑ David C. Smith. "Nice Guys Don't Finish Last Chrysler's Tom Stallkamp is living proof". Wardsautoworld.com. Retrieved October 23, 2009.
  54. ↑ Wiggers Martin H.: Sternstunden, Strategische Unternehmensfuehrung Nr. 2, 2000. Munich, St. Gallen 2000, ISSN 1436-5812
  55. 1 2 3 4 Edmondson, Gail (September 20, 2006). "Zetsche's Chrysler Dilemma". BusinessWeek. Retrieved October 23, 2009.
  56. ↑ Mayne, Eric (October 23, 2006). "Chrysler Vehicle Stocks Higher Than Reported". Wardsauto.com. Retrieved October 23, 2009.
  57. ↑ Ulrich, Lawrence (15 March 2013). "A Chase Car to Lure Private Eyes Out of Retirement". The New York Times. Retrieved 29 July 2013.
  58. 1 2 3 "Dr. Z's Waning Credibility". Businessweek .com. Retrieved October 23, 2009.
  59. ↑ "Cerberus to Pay $7.4B for Chrysler Stake". Associated Press.
  60. ↑ "Extraordinary Shareholders' Meeting of DaimlerChrysler Approves Renaming as Daimler AG" (Press release). Daimler AG. October 4, 2007. Retrieved January 24, 2009.
  61. ↑ Story, Louise (August 9, 2009). "For Private Equity, a Very Public Disaster". The New York Times. Retrieved March 31, 2010.
  62. ↑ "Chrysler Group LLC: About Us – Our Team – Dodge, Chrysler, Jeep, Mopar and GEM". Chryslerllc.com. Retrieved October 30, 2009.
  63. ↑ "LaSorda's legacy is 'unselfish devotion'". The Detroit News. May 2, 2009. Retrieved October 30, 2009.
  64. 1 2 http://web.archive.org/web/20110717001757/http://business.theglobeandmail.com/servlet/story/RTGAM.20090512.WBdriving20090512171514/WBStory/WBdriving. Archived from the original on July 17, 2011. Retrieved October 30, 2009. Missing or empty |title= (help)
  65. ↑ "Back to work: Chrysler strike ends after 6 hours". DetNews.
  66. ↑ "More Chrysler Models on Chopping Block". AOL Money & Finance.
  67. ↑ "Can Chrysler Woo Fiat?". Forbes. Archived from the original on October 9, 2008.
  68. ↑ Yahoo! News Chrysler, GM discuss merger, acquisition
  69. ↑ Shepardson, David; Tierney, Christine (November 7, 2008). "GM, Cerberus end Chrysler tie-up talks". Webcitation.org. Retrieved November 21, 2010.
  70. ↑ Bunkley, Nick (October 24, 2008). "Chrysler to Cut 25% of Salaried and Contract Jobs". The New York Times. Retrieved January 13, 2012.
  71. ↑ "20 percent=zero". Reuters. October 23, 2008.
  72. ↑ "Авто@Mail.Ru". Auto.mail.ru. Retrieved April 30, 2009.
  73. ↑ "Chrysler's Nardelli Says Company Needs Alliances and Bail Out". Theautochannel.com. Retrieved April 30, 2009.
  74. ↑ Detroit Chiefs Plead for Aid. New York Times on November 18, 2008.. Retrieved November 21, 2008.
  75. ↑ Kellogg, Alex P. (December 18, 2008). "Chrysler to Halt Car Production at Plants; Charge Dealers Fees". The Wall Street Journal. Retrieved April 30, 2009.
  76. ↑ Krisher, Tom and Fowler, Bree. "U.S. auto sales stuck in reverse; Chrysler hit hard" The Seattle Times January 6, 2009, retrieved on January 22, 2009.
  77. ↑ "Canadian news, entertainment, television, newspapers, free email and more". canada.com. Retrieved October 30, 2009.
  78. ↑ "GM Says CAW Union Pact Wins Parity With U.S. Foreign Automakers". Bloomberg. March 14, 2009. Retrieved October 30, 2009.
  79. ↑ "RPT-Chrysler Canada cannot afford GM-CAW deal -source | Deals | Private Capital". Reuters. March 16, 2009. Retrieved October 30, 2009.
  80. ↑ "Press: Chrysler sales sufficient".
  81. ↑ Obama Takes The Wheel In Detroit. Forbes, March 30, 2009. Retrieved March 30, 2009.
  82. ↑ Excerpts from President Barack Obama's remarks about the U.S. auto industry's restructuring effort, March 30, 2009
  83. ↑ Krisher, Tom (January 20, 2009). "Fiat deal could give Chrysler small-car technology". Google News. Associated Press. Retrieved January 20, 2009.
  84. ↑ Kim, Soyoung (April 13, 2009). "Chrysler, Fiat discuss new management and board: report". Reuters. Retrieved April 30, 2009.
  85. ↑ Chrysler and Union Agree to Deal Before Federal Deadline. New York Times, April 26, 2009. Retrieved April 27, 2009.
  86. ↑ Gupta, Poornima (February 9, 2009). "WRAPUP 12-Chrysler files for bankruptcy; inks Fiat deal | Reuters". Uk.reuters.com. Retrieved May 1, 2009.
  87. 1 2 "Chrysler Bankruptcy Filing" (PDF). New York Times. April 30, 2009. Retrieved May 1, 2009. The bankruptcy filing and related documents submitted by Chrysler to the United States Bankruptcy Court of the Southern District of New York, in Manhattan, New York City.
  88. ↑ Maynard, Micheline (May 1, 2009 – Published April 30, 2009). "‘Surgical’ Bankruptcy Is Set for Chrysler". New York Times. Retrieved May 1, 2009. Check date values in: |date= (help)
  89. ↑ Valdes-Dapena, Peter (May 14, 2009). "Chrysler closing 789 dealerships". CNN Money. Retrieved May 16, 2009.
  90. ↑ Kellogg, Alex P. (June 1, 2009). "Chrysler Could Exit Bankruptcy Reorganization as Soon as Monday". The Wall Street Journal. Retrieved June 6, 2009.
  91. ↑ "FACTBOX: Details of Chrysler bankruptcy plan". Reuters. April 30, 2009. Retrieved June 6, 2009.
  92. ↑ Aaron Smith (June 1, 2009). "Judge approves sale of Chrysler assets". CNN. Retrieved June 6, 2009.
  93. ↑ de la Merced, Michael J. (June 8, 2009). "Supreme Court Delays Sale of Chrysler to Fiat". The New York Times. Retrieved June 8, 2009.
  94. 1 2 3 4 de la Merced, Michael J. (June 9, 2009). "Supreme Court Clears Way for the Sale of Chrysler to Fiat". New York Times. Retrieved June 9, 2009.
  95. ↑ per Curiam (June 9, 2009). "Indiana State Police Pension Trust, et al, v Chrysler LLC, et al, On Applications for Stay" (PDF). Slip Opinion (Supreme Court of the United States Supreme Court (via New York Times)). Retrieved June 9, 2009.
  96. ↑ Ramsey, Mike and Kary, Tiffany. "Chrysler Assets Said to Have Little Net Proceeds for Creditors" Bloomberg.com, Jun. 23, 2009, retrieved on July 10, 2009.
  97. 1 2 Forden, Sara Gay; Ramsey, Mike (June 10, 2009). "Fiat Buys Chrysler, Forms Sixth-Largest Carmaker (Update1)". Bloomberg. Retrieved June 10, 2009.
  98. ↑ "Chrysler, LLC". The New York Times. Retrieved August 10, 2012.
  99. 1 2 Bunklay, Nick (21 July 2011). "Government Sells Stake in Chrysler". New York Times. Retrieved 29 July 2013.
  100. ↑ "Fiat stake in Chrysler rises to 30%, aiming for 51%". Gannett Company. April 11, 2011. Retrieved April 12, 2011.
  101. ↑ "Lancia, Chrysler to share products". Leftlanenews.com. Retrieved November 29, 2009.
  102. ↑ Jared Gall (January 2010). "Chrysler Delta Concept – Auto Shows". Car and Driver magazine. Retrieved January 11, 2010.
  103. ↑ Burgess, Scott (November 5, 2009). "Dodge, Jeep, Chrysler get makeover". The Detroit News. Retrieved November 21, 2010.
  104. ↑ Henry, Jim (November 5, 2009). "Fiat Plan for Chrysler is One Letter Away from "Faith"". BNET. Retrieved November 21, 2010.
  105. ↑ Wayland, Michael (December 16, 2014). "Chrysler renamed 'FCA US LLC'". The Detroit News. Retrieved December 16, 2014.
  106. ↑ "Birth of the Pentastar".
  107. ↑ "Dealership ranking system". FiveStar.com. Retrieved November 21, 2010.
  108. ↑ http://media.chrysler.com/newsrelease.do;jsessionid=C0ED7D81EE1DFDF3E1942E0F414BDF83?&id=7049&mid=
  109. 1 2 http://www.usatoday.com/story/money/cars/2014/11/25/chrysler-pentastar-fiat-fca/70107100/
  110. ↑ Raja, Siddarth (May 17, 2007). "Chrysler’s old logo making a comeback". Motor Authority. Retrieved November 21, 2010.

References and further reading

This article is issued from Wikipedia - version of the Wednesday, March 02, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.