ISO/IEC 19770

International standards in the ISO/IEC 19770[1] family of standards for IT asset management (ITAM) address both the processes and technology for managing software assets and related IT assets. Broadly speaking, the standard family belongs to the set of Software Asset Management (or SAM) standards and is integrated with other Management System Standards.

ISO/IEC 19770 day-to-day management comes under ISO/IEC/SC7/WG21, or Working Group 21 (WG21) chaired by Roger Cummings[2] as convener and Peter Beruk[3] as secretary. It is WG21 that is responsible for developing, improving and ensuring market needs are met when developing these standards.

What is the purpose of 19770?

The ISO 19770 standard is a concept of ITAM standardization within an organization incorporating ISO/IEC standards.

The objective of the standard is to give organizations of all sizes information and assistance to assist at the risk and cost minimization of ITAM assets. Through implementation, these same organizations will acquire a competitive advantage through:

The major parts of this ITAM standard are detailed below.

  1. ISO/IEC 19770-1 is a process framework to enable an organization to prove that it is performing ITAM to a standard sufficient to satisfy corporate governance requirements and ensure effective support for IT service management overall.
  2. ISO/IEC 19770-2 provides an ITAM data standard for software identification tags ("SWID").
  3. ISO/IEC 19770-3 provides a technical definition of a schema that can encapsulate the details of software entitlements, including usage rights, limitations and metrics ("ENT").
  4. ISO/IEC 19770-5 provides the overview and vocabulary.
19770 Family Block Diagram

ISO/IEC 19770-1: processes

ISO/IEC 19770-1 is a framework of ITAM processes to enable an organization to prove that it is performing software asset management to a standard sufficient to satisfy corporate governance requirements and ensure effective support for IT service management overall. ISO/IEC 19770-1 is aligned to Service Management (ISO/IEC 20000-1), and contains 27 process areas, with objectives and detailed outcomes defined for each.

Updates to 19770-1

The first generation was published in 2006. The second generation was published in 2012. It retains the original content (with only minor changes), but splits the standard up into four tiers which can be attained sequentially. These tiers are:

This revised standard is designed to allow the implementation of ITAM processes to be "accomplished in multiple increments and to that increment most suited to the needs of the organization."[4]

Preview of 19770-1

An overview of the standard is available from ISO and is available in English[5] and French.[6]

ISO/IEC 19770-2: software identification tag

ISO/IEC 19770-2 provides an ITAM data standard for software identification (SWID) tags. Software ID tags provide authoritative identifying information for installed software or other licensable item (such as fonts or copyrighted papers).

Overview of SWID tags in use

There are three primary methods that may be used to ensure SWID tags are available on devices with installed software:

Providing accurate software identification data improves organizational security, and lowers the cost and increases the capability of many IT processes such as patch management, desktop management, help desk management, software policy compliance, etc.

Discovery tools, or processes that utilize SWID tag data to determine the normalized names and values that are associated with a software application and ensure that all tools and processes used by an organization refer to software products with the same exact names and values.

Standards development information

This standard was first published in November 2009.[7] A revision of this standard was published in October 2015.[8]

Steve Klos[9] is the editor of 19770-2.

Non-profit organizational support

In 2009, a non-profit organization called TagVault.org[10] was formed under IEEE-ISTO[11] to evangelize the use of SWID tags. TagVault.org acts as a registration and certification authority for ISO/IEC 19770-2 software identification tags (SWID tags) and will provide tools and services allowing all SAM ecosystem members to take advantage of SWID tags faster, with a lower cost and with more industry compatibility than would otherwise be possible. SWID tags can be created by anyone, so individuals and organizations are not required to be part of TagVault.org to create or distribute tags.

Commercial organizational support

Numerous Windows installation packaging tools utilize SWID tags including:

Many software discovery tools already utilize SWID tags, including Altiris, Aspera License Management, Belarc's BelManage, Snow Inventory, CA Technologies discovery tools, Eracent's EnterpriseAM, Flexera Software's FlexNet Manager Platform, HP's Universal Discovery, IBM Endpoint Manager, and Microsoft's System Center 2012 R2 Configuration Manager.

Adobe has released multiple versions of their Creative Suites products with SWID tags.

Symantec has also released multiple products that include SWID tags and is committed to helping move the software community to a more consistent and normalized approach to software identification and eventually to a more automated approach to compliance.[12]

Microsoft Corporation has been adding SWID tags to all new releases of software products since Windows 8 was released.[13]

IBM started shipping tags with some software products in early 2014, but as of November, all releases of IBM software include SWID tags. This equates to approximately 300 product releases a month that include SWID tags.

Governmental support

The US federal government has identified 19770-2 SWID tags as an important aspect of the efforts necessary to manage compliance, logistics and security software processes. The 19770-2 standard is included on the US Department of Defense Information Standards Registry (DISR) as an emerging standard as of September 2012. The National Institute of Standards and Technology (NIST) and the National Cybersecurity Center of Excellence (NCCoE) recently discussed the need for SWIDs in the marketplace.[14]

Standards development organization support

The Distributed Management Task Force (DMTF) has developed a Software ID Tag Profile[15] that defines how SWID tags are utilized in the Common Information Model.[16]

The Trusted Computing Group (TCG) is developing a standard TNC SWID Messages and Attributes for IF-M Specification[17] that utilizes tag data for security purposes.

The National Cybersecurity Center of Excellence (NCCoE) has documented the Software Asset Management Continuous Monitoring building block[18] that specifies how SWID tags are used for the near real-time identification of software.

The National Institute of Standards and Technology (NIST) is in the process of creating documentation that specifies how SWID tags will be used by governmental organizations including the Department of Homeland Security. David Waltermire presented information describing the NIST Security Automation Program[19] and how SWID tags can support that effort.

Preview of ISO 19770-2:2015

An overview of the standard is available from ISO and is available in English [20]

ISO/IEC 19770-3: software entitlement schema (ENT)

This part of ISO/IEC 19770 provides a technical definition of an XML schema that can encapsulate the details of software entitlements, including usage rights, limitations and metrics.

The primary intentions of 19770-3 are:

  1. To provide a basis for common terminology to be used when describing entitlement rights, limitations and metrics
  2. To provide a schema which allows effective description of rights, limitations and metrics attaching to a software license.

The specific information provided by an entitlement schema (ENT) may be used to help ensure compliance with license rights and limits, to optimize license usage and to control costs. Though ENT creators are encouraged to provide the data that allow for the automatic processing, it is not mandated that data be automatically measurable. The data structure is intended to be capable of containing any kind of terms and conditions included in a software license agreement.

This part of ISO/IEC 19770 supports ITAM processes as defined in ISO/IEC 19770-1[21] It is also designed to work together with software identification tags as defined in ISO/IEC 19770-2.[22] Standardization in the field of software entitlements provides uniform, measurable data for both the license compliance, and license optimization, processes of SAM practice.

This part of ISO/IEC 19770 does not provide requirements or recommendations for processes related to software asset management or ENTs. The software asset management processes are in the scope of ISO/IEC 19770-1.

Standards development information

The ISO/IEC 19770-3 Other Working Group ("OWG")[23] was convened by teleconference call on 9 September 2008.

John Tomeny of Sassafras Software Inc was appointed as the first convener of the ISO/IEC 19770-3 Other Working Group by Working Group 21 (ISO/IEC JTC 1/SC 7/WG 21), followed by Krzysztof (Chris) Baczkiewicz for Eracent. In addition to WG21 members, other participants in the 19770-3 OWG may be any "individuals considered to have relevant expertise by the Convener".[24]

Jason Keogh[25] of Alcurian and part of the delegation from Ireland is current convener of 19770-3.

ISO/IEC 19770-3 was published on April 15, 2016.

Principles

This part of ISO/IEC 19770 has been developed with the following practical principles in mind:

Maximum possible usability with legacy entitlement information

The ENT, or software entitlement schema, is intended to provide the maximum possible usability with existing entitlement information, including all historical licensing transactions. While the specifications provide many opportunities for improvement in entitlement processes and practices, they must be able to handle existing licensing transactions without imposing requirements which would prevent such transactions being codified into Ent records.

Maximum possible alignment with the software identification tag specification (ISO/IEC 19770-2)

This part of ISO/IEC 19770 (entitlement schema) is intended to align closely with part 2 of the standard (software identification tags). This should facilitate both understanding and their joint use. Furthermore, any of the elements, attributes, or other specifications of part 2 which the ENT creator may wish to utilize may be used in this part as well.

Stakeholder benefits

It is intended that this standardized schema will be of benefit to all stakeholders involved in the creation, licensing, distribution, release, installation, and ongoing management of software and software entitlements.

Preview of ISO 19770-3

An overview of the ISO 19770-3 standard is available from ISO and is available in English[26]


ISO/IEC 19770-4: resource utilization measurement

ISO/IEC 19770 4 provides a standard for resource utilization measurement information (RUM) structures. The RUM incorporates a standardized structure containing authoritative usage information about consumption of resources related to the use of a software asset. The structure will be created in a manner that is consistent with the identification information defined in ISO/IEC 19770-2, and with the entitlement information defined in ISO/IEC 19770-3, and when used together these three types of information have the capability to significantly enhance and automate the processes of IT asset management.

ISO/IEC 19770-5: overview and vocabulary

ISO/IEC 19770-5:2015 provides an overview of ITAM, which is the subject of the ISO/IEC 19770 family of standards, and defines related terms.[27] ISO/IEC 19770-5:2015 is applicable to all types of organization (e.g. commercial enterprises, government agencies, non-profit organizations).

ISO/IEC 19770-5:2015 contains:

  1. an overview of the ISO/IEC 19770 family of standards;
  2. an introduction to SAM;
  3. a brief description of the foundation principles and approaches on which SAM is based; and
  4. consistent terms and definitions for use throughout the ISO/IEC 19770 family of standards.

Free copy of ISO/IEC 19770-5

A free copy of the overview and vocabulary is available here.

References

External links

This article is issued from Wikipedia - version of the Wednesday, April 20, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.