ISO/IEC 7816

ISO/IEC 7816 is an international standard related to electronic identification cards with contacts, especially smart cards, managed jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).

It is edited by the Joint technical committee (JTC) 1 / Sub-Committee (SC) 17, Cards and personal identification.^[1]

The following describes the different parts of this standard.

Note: abstracts and dates, when present, are mere quotations from the ISO website,^[2] and are neither guaranteed at the time of edition nor in the future.

7816-1: Physical characteristics

Created in 1987, updated in 1998, amended in 2003.^[3]^[4]

This part describes the physical characteristics of the card, primarily by reference to ISO/IEC 7810 Identification cards — Physical characteristics, but also with other characteristics such as mechanical strength.

7816-2: Cards with contacts — Dimensions and location of the contacts

Created in 1988, updated in 1999, amended in 2004, updated in 2007.^[5]

7816-3: Cards with contacts — Electrical interface and transmission protocols

Created in 1989, amended in 1992 (addition of the T=1 protocol), amended in 1994 (revision of Protocol Type Selection), updated in 1997 (including addition of 3 Volt operation), amended in 2002 (including addition of 1.8 Volt operation), last updated in 2006 (including removal of Vpp).^[6]

7816-4: Organization, security and commands for interchange

Created in 1995, updated in 2013.^[7]

According to its abstract, it specifies:

contents of command-response pairs exchanged at the interface,
means of retrieval of data elements and data objects in the card,
structures and contents of historical bytes to describe operating characteristics of the card,
structures for applications and data in the card, as seen at the interface when processing commands,
access methods to files and data in the card,
a security architecture defining access rights to files and data in the card,
means and mechanisms for identifying and addressing applications in the card,
methods for secure messaging,
access methods to the algorithms processed by the card. It does not describe these algorithms.

It does not cover the internal implementation within the card or the outside world.

ISO/IEC 7816-4:2013 is independent of the physical interface technology, and applies equally to contact cards, proximity cards and vicinity cards.

7816-5: Registration of application providers

Created in 1995, updated in 2004.^[8]

According to its abstract, ISO/IEC 7816-5 defines how to use an application identifier to ascertain the presence of and/or perform the retrieval of an application in a card.

ISO/IEC 7816-5:2004 shows how to grant the uniqueness of application identifiers through the international registration of a part of this identifier, and defines

the registration procedure,
the authorities in charge thereof,
the availability of the register which links the registered parts of the identifiers and the relevant application providers.

7816-6: Interindustry data elements for interchange

Created in 1996, updated in 2004.^[9]

According to its abstract, it specifies the Data Elements (DEs) used for interindustry interchange based on integrated circuit cards (ICCs) both with contacts and without contacts. It gives the identifier, name, description, format, coding and layout of each DE and defines the means of retrieval of DEs from the card.

7816-7: Interindustry commands for Structured Card Query Language (SCQL)

Created in 1999.^[10]

7816-8: Commands for security operations

Created in 1995, updated in 2004.^[11]

According to its abstract, it specifies interindustry commands for integrated circuit cards (either with contacts or without contacts) that may be used for cryptographic operations. These commands are complementary to and based on the commands listed in ISO/IEC 7816-4.

Annexes are provided that give examples of operations related to digital signatures, certificates and the import and export of asymmetric keys.

The choice and conditions of use of cryptographic mechanisms may affect card exportability. The evaluation of the suitability of algorithms and protocols is outside the scope of ISO/IEC 7816-8.

7816-9: Commands for card management

Created in 1995, updated in 2004.^[12]

According to its abstract, it specifies interindustry commands for integrated circuit cards (both with contacts and without contacts) for card and file management, e.g. file creation and deletion. These commands cover the entire life cycle of the card and therefore some commands may be used before the card has been issued to the cardholder or after the card has expired.

An annex is provided that shows how to control the loading of data (secure download) into the card, by means of verifying the access rights of the loading entity and protection of the transmitted data with secure messaging. The loaded data may contain, for example, code, keys and applets.

7816-10: Electronic signals and answer to reset for synchronous cards

Created in 1999.^[13]

This part specifies the power, signal structures, and the structure for the answer to reset between an integrated circuit card(s) with synchronous transmission and an interface device such as a terminal.

7816-11 Personal verification through biometric methods

Created in 2004.^[14]

According to its abstract, it specifies the usage of interindustry commands and data objects related to personal verification through biometric methods in integrated circuit cards. The interindustry commands used are defined in ISO/IEC 7816-4. The data objects are partially defined in this International Standard, partially imported from ISO/IEC 19785-1.

ISO/IEC 7816-11 also presents examples for enrollment and verification and addresses security issues.

7816-12 Cards with contacts — USB electrical interface and operating procedures

Created in 2005.^[15]

According to its abstract, it specifies the operating conditions of an integrated circuit card that provides a USB interface. An integrated circuit card with a USB interface is named USB-ICC.

ISO/IEC 7816-12:2005 specifies:

the electrical conditions when a USB-ICC is operated by an interface device - for those contact fields that are not used, when the USB interface is applied;
the USB standard descriptors and the USB-ICC class specific descriptor;
the data transfer between host and USB-ICC using bulk transfers or control transfers;
the control transfers which allow two different protocols named version A and version B;
the (optional) interrupt transfers to indicate asynchronous events;
status and error conditions.

ISO/IEC 7816-12:2005 provides two protocols for control transfers. This is to support the protocol T=0 (version A) or to use the transfer on APDU level (version B). ISO/IEC 7816-12:2005 provides the state diagrams for the USB-ICC for each of the transfers (bulk transfers, control transfers version A and version B). Examples of possible sequences which the USB-ICC must be able to handle are given in an informative annex.

The USB CCID device class defines a standard for communicating with ISO/IEC 7816 smart cards over USB.

7816-13: Commands for application management in multi-application environment

This part specifies commands for application management in a multi-application environment.^[16]

7816-15: Cryptographic information application

Created in 2004, amended in 2004, 2007, 2008.^[17]^[18]^[19]^[20]

According to its abstract, it specifies a card application. This application contains information on cryptographic functionality. Further, ISO/IEC 7816-15:2004 defines a common syntax (in ASN.1) and format for the cryptographic information and mechanisms to share this information whenever appropriate.

ISO/IEC 7816-15:2004 supports the following capabilities:

storage of multiple instances of cryptographic information in a card;
use of the cryptographic information;
retrieval of the cryptographic information;
cross-referencing of the cryptographic information with DOs defined in ISO/IEC 7816 when appropriate;
different authentication mechanisms; and
multiple cryptographic algorithms.

References

↑ http://www.iso.org/iso/standards_development/technical_committees/list_of_iso_technical_committees/iso_technical_committee.htm?commid=45144
↑ http://www.iso.org/iso/iso_catalogue
↑ "ISO/IEC 7816-1:1998 Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics". Iso.org. 2011-01-31. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-1:1998/Amd 1:2003 Maximum height of the IC contact surface". Iso.org. 2011-01-31. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-2:2007 Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts". Iso.org. 2007-10-11. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-3:2006 Identification cards — Integrated circuit cards — Part 3: Cards with contacts — Electrical interface and transmission protocols". Iso.org. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-4:2013 Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange". Iso.org. 2013-04-04. Retrieved 2015-03-15.
↑ "ISO/IEC 7816-5:2004 Identification cards — Integrated circuit cards — Part 5: Registration of application providers". Iso.org. 2010-03-17. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-6:2004 Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange". Iso.org. 2009-09-30. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-7:1999 Identification cards — Integrated circuit(s) cards with contacts — Part 7: Interindustry commands for Structured Card Query Language (SCQL)". Iso.org. 2010-06-17. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-8:2004 Identification cards — Integrated circuit cards — Part 8: Commands for security operations". Iso.org. 2009-09-30. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-9:2004 Identification cards — Integrated circuit cards — Part 9: Commands for card management". Iso.org. 2009-09-30. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-10:1999 Identification cards — Integrated circuit(s) cards with contacts — Part 10: Electronic signals and answer to reset for synchronous cards". Iso.org. 2010-06-17. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-11:2004 Identification cards — Integrated circuit cards — Part 11: Personal verification through biometric methods". Iso.org. 2007-06-20. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-12:2005 Identification cards — Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures". Iso.org. 2011-03-17. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-13:2007 Identification cards — Integrated circuit cards — Part 13: Commands for application management in a multi-application environment". Iso.org. 2007-03-09. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-15:2004 Identification cards — Integrated circuit cards — Part 15: Cryptographic information application". Iso.org. 2007-06-20. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-15:2004/Cor 1:2004". Iso.org. 2004-06-30. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-15:2004/Amd 1:2007 Examples of the use of the cryptographic information application". Iso.org. 2007-10-31. Retrieved 2011-11-12.
↑ "ISO/IEC 7816-15:2004/Amd 2:2008 - Error corrections and extensions for multi-application environments". iso.org.

External links

ISO standards by standard number

List of ISO standards / ISO romanizations / IEC standards

1–9999	1 2 3 4 5 6 7 9 16 31 -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 128 216 217 226 228 233 259 269 302 306 428 518 519 639 -1 -2 -3 -5 -6 646 690 732 764 843 898 965 1000 1004 1007 1073-1 1413 1538 1745 1989 2014 2015 2022 2047 2108 2145 2146 2240 2281 2709 2711 2788 2852 3029 3103 3166 -1 -2 -3 3297 3307 3602 3864 3901 3977 4031 4157 4217 4909 5218 5428 5775 5776 5800 5964 6166 6344 6346 6385 6425 6429 6438 6523 6709 7001 7002 7098 7185 7200 7498 7736 7810 7811 7812 7813 7816 8000 8178 8217 8571 8583 8601 8632 8652 8691 8807 8820-5 8859 -1 -2 -3 -4 -5 -6 -7 -8 -8-I -9 -10 -11 -12 -13 -14 -15 -16 8879 9000/9001 9075 9126 9293 9241 9362 9407 9506 9529 9564 9594 9660 9897 9899 9945 9984 9985 9995

10000–19999	10006 10116 10118-3 10160 10161 10165 10179 10206 10218 10303 -11 -21 -22 -28 -238 10383 10487 10585 10589 10646 10664 10746 10861 10957 10962 10967 11073 11170 11179 11404 11544 11783 11784 11785 11801 11898 11940 (-2) 11941 11941 (TR) 11992 12006 12182 12207 12234-2 13211 -1 -2 13216 13250 13399 13406-2 13407 13450 13485 13490 13567 13568 13584 13616 14000 14031 14224 14289 14396 14443 14496 -2 -3 -6 -10 -11 -12 -14 -17 -20 14644 -1 -2 -3 -4 -5 -6 -7 -8 -9 14649 14651 14698 -2 14750 14764 14882 14971 15022 15189 15288 15291 15292 15398 15408 15444 -3 15445 15438 15504 15511 15686 15693 15706 -2 15707 15897 15919 15924 15926 15926 WIP 15930 16023 16262 16612-2 16750 16949 (TS) 17024 17025 17203 17369 17799 18000 18004 18014 18245 18629 18916 19005 19011 19092 (-1 -2) 19114 19115 19125 19136 19439 19500 19501 19502 19503 19505 19506 19507 19508 19509 19510 19600 19752 19757 19770 19775-1 19794-5 19831

20000+	20000 20022 20121 21000 21047 21500 21827:2002 22000 23270 23271 23360 24517 24613 24617 24707 25178 25964 26000 26300 26324 27000 series 27000 27001:2005 27001:2013 27002 27003 27004 27005 27006 27007 27729 27799 28000 29110 29148 29199-2 29500 30170 31000 32000 38500 40500 42010 80000 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14

Categories	ISO standards ISO 639 ISO 3166 ISO / IEC standards OSI protocols

All articles with prefix "ISO"

This article is issued from Wikipedia - version of the Saturday, April 16, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.