Narrow gauge railways in China

The gauge for the most of the China national railway network is standard gauge. Currently, in the national railway network, only the 1,000 mm (3 ft 3 38 in) metre gauge Kunming–Hai Phong Railway uses narrow gauge, and it is expected to be converted into standard gauge soon. In addition, there are some industrial lines still using narrow gauge, mostly 2 ft 6 in (762 mm) narrow gauge or 600 mm (1 ft 11 58 in) narrow gauge. As of 2003, 600+ km narrow gauge railways, 50000+ km standard gauge railways, and 9.4 km broad gauge railways were in use in mainland China.[1]

The 2 ft 6 in (762 mm) gauge Jiayang Coal Railway in Sichuan Province.

Operational narrow gauge railways

Kunming-Hekou Railway

The 1,000 mm (3 ft 3 38 in) metre gauge Kunming-Hekou Railway (previously known as Sino-Vietnamese Railway) was built by French colonists between Vietnam and China. It is now inoperative for passengers due to landslides but does have freight services. This railway, opened in 1910, had a 600 mm (1 ft 11 58 in) gauge branch line from Caoba to Shiping which operated 0-10-0 tender locos built by Baldwin Locomotive Works.[2] The metre gauge section was originally administered in more or less the same way as the Indochinese networks, and it was physically possible for through trains to be run from Kunming to Singapore, as metre gauge was used in both these countries. During the Japanese occupation Japanese National Railways Class 9600 2-8-0 locomotives were shipped to aid their invasion, and after the completion of the "death railway" it was possible for a time for through traffic to Burma. This is now impossible as sections of this railway have been destroyed during the conflicts since World War II.[2]

Industrial railways

A narrow gauge railway in Qianwei County, Sichuan Province used to haul coal.

In Manchuria, lumber industries built narrow gauge railways into the forests. These used Russian and Japanese locomotives, copied from Soviet or Eastern European designs. Now most of them have disappeared. These railways mostly use a gauge of 2 ft 6 in (762 mm).

3 ft 6 in (1,067 mm) gauge railways

Several 3 ft 6 in (1,067 mm) gauge railways were constructed by the Japanese.

Manchuria

There were several 3 ft 6 in (1,067 mm) gauge military railways in Manchuria during the Russo-Japanese War. These Japanese military railways - which includes a section converted from the 1,520 mm (4 ft 11 2732 in) Russian gauge Chinese Eastern Railway - used Japanese National Railways stock and were quickly converted back to standard gauge after the war to facilitate through traffic with the British controlled Peking Mukden Railway, which was standard gauge. As a result, the South Manchurian Railway, a creation of the Japanese Kwantung Army, was standard gauge.[2][3]

Hainan

In 1941-43, during the Japanese occupation of Hainan, several 3 ft 6 in (1,067 mm) gauge rail lines were constructed in the western part of the island. Of particular importance for the Japanese war effort was the line connecting the iron ore mine in Shilu with the Basuo Harbor.[4]

The lines fell into disrepair and were abandoned after the fall of Hainan to the Communists in April 1950. They were rebuilt and converted to the standard gauge between the mid-1950s and 1985; now they form part of the Hainan Western Ring Railway.

Metre gauge railways

Metre gauge railways were popular in China in several regions before the 1949 communist revolution. Several lines were constructed, with the intention to join all the railways, forming a new sphere of influence for the French which never materialized.

Kunming Hekou Railway

The 466 km Chinese section of the French built Kunming–Hai Phong Railway.

Shijiazhuang to Taiyuan

The railway from Shijiazhuang to Taiyuan (sometimes known as Zheng Tai Railway) was opened at the turn of the 20th century. It was French and Belgian controlled, since it was a feeder of the Belgian controlled Peking-Hankow Railway. To minimise costs, it was built to the same 1,000 mm (3 ft 3 38 in) metre gauge of the Kunming Hekou Railway, with the hope that the latter could be extended to Shanxi province. The railway was built to the nature of a light railway and used rolling stock built in France and Belgium.

Datong to Pukou

The Railway from Datong to Pukou (Tong Pu Railway), opened in 1933, which was funded by the Japanese and controlled by the Shanxi warlord, Yan Xishan, and which connected the Shijiazhuang - Taiyuan Railway at Taiyuan, had to be built to metre gauge as well. The Datong - Pukou Railway used rolling stock built by Japanese companies, even withdrawn old "Japanese National Railways" or "Imperial Taiwan Railway" stock (which is based on the 3 ft 6 in (1,067 mm) gauge Liu Mingchuan's railway' in Qing dynasty). When the Japanese invaded the Shanxi and Hebei provinces during the Sino-Japanese War, these two railways were converted to standard gauge.[2]

Yunnan Burma Railway

The 1,000 mm (3 ft 3 38 in) metre gauge Yunnan Burma line was built from 1941 but had to be aborted due to Japanese advances, and has never been completed.

Other

In many rural or suburban areas, metre gauge railways were built to transport agricultural produce. Such was the case of two light railways east of Pudong, Shanghai. They were isolated systems using small tank engines, like 4-4-2Ts. Later, experiments were made with gasoline railcar and trailer sets having Ford engines. They were closed in the 1950s and 1970s respectively and replaced by bus services.[2]

2 ft 6 in (762 mm) gauge railways

In many provinces 2 ft 6 in (762 mm) gauge light railways were used for mines and prominently in Henan and Sichuan they were used for rural transportation, ironically most of them were built in an era when most European light railways had started to dwindle in favour of roads. The Shibanxi Railway in Sichuan is being preserved as China's first heritage steam railway.[2] The Bagou–Shixi Railway is still operating with steam locomotives, partly for heritage purposes.[5]

Province Railway
Guangdong Province
  • Da Tang Railway[6]
  • Gaoyao Coal Railway[7]
  • Hetou Railway[8]
  • Lishan Iron Ore Mine Railway[9]
  • Meixian Provincial Railway (with branches) [10]
  • Yingde Forestry Railway[11]
  • Yingde Mineral Railway[12]
  • Yunfu Pyrites Mine Railway[13]
Heilongjiang province
Henan Province
Hunan Province
Jiangxi province
  • Ganzhou Timber Railway[16]
  • Southern Jiangxi Forest Railway
Shanghai
Shanxi Province
Sichuan Province

600 mm (1 ft 11 58 in) gauge railways

Province Railway
Guangdong Province
  • Chi Ni Limestone Railway[20]
Hunan Province
  • Small mine railway near Guiyang[14]
  • Mine near Hulukou, 5 km, inside mine, electrified with Overhead line[15]
Liaoning Province
  • Coal tramways round Nanpiao[21]
Sichuan Province
  • Hongbitan coal mine near Shenzhenjiao, loading line and disused spoil line.[19]
  • Two coalmines (battery electric and cable) at Baiyan.[17]
  • Jianghe Coal Railway[22]
  • Shibanxi Railway, converted to 2 ft 6 in (762 mm) gauge
Yunnan province

500 mm (19 34 in) gauge railways

Sichuan Province

400 mm (15 34 in) gauge railways

Sichuan Province

Other

Arxan Forrest Railway

Inside the carriage
The steam locomotive and the railroad

It ran during the 1950s and 1990s, carried wood, goods and passengers. Its highest speed is 60 km/h.

Xinyi Railway

Main article: the Chinese wikipedia article on Xinyi Tielu

Xinyi Railway was a 42.5 kmlong branch line of the Beijing-Hankou Railway (now the Beijing–Guangzhou railway) located in Hebei. It was built in the winter of 1902 to allow the Empress Dowager Cixi to travel from Beijing to the Western Qing Tombs. Although the railway had no economic benefit, it was the first railway to be financed and built by the Chinese alone.

The empress dowager and the Guangxu Emperor fled to Xi'an in the aftermath of the Boxer Rebellion. After the Boxer Protocol was signed in September 1901, Cixi and the royal family made their way back from Xi'an to Beijing in December, taking a special train along the Lo-Han Railway (now also part of the BeijingGuangzhou Railway) from Shijiazhuang to Beijing. To atone for the occupation of Beijing by the Eight-Nation Alliance, the Empress first visited the Eastern Qing Tombs in April. Afterward she intended to go to Western Qing Tombs. Because of the distance, she thought of traveling by train. The Empress then ordered Governor Yuan Shikai to construct a railway from Gaobeidian to Yi County, Hebei, within six months at a cost of tls. 600,000.

The Xinyi Railway headed west from Gaobeidian across two rivers. Yuan Shikai originally chose British engineer Claude W. Kinder to carry out the construction. Claude was the Kaiping Tramway's chief engineer, as well as the chief engineer of its extensions. Unexpectedly, this led to a French protest, so Yuan Shikai decided that the Chinese would carry out the construction themselves, appointing Jeme Tien Yow chief engineer on 19 October.

The project started in November and was completed by February 1903. The railway used old track and sleepers from the Guanneiwai Railway. On 5 April 1903, the empress and other members of the dynasty rode a special train from the Beijing Yongdingmen along the Beijing-Hankou line, then switching to the new track. The whole length was about 120 km, taking a little over two hours. The Empress was very pleased with the railway and train and gave the engineer a yellow jacket, flowers, feathers, and the title of prefect.

Cixi only used the railway once. The line was destroyed during the Second Sino-Japanese War, its track being used to repair other railways. Later, it was repaired and regauged during the Great Leap Forward. In the 1990s, it was renamed the Gaoyi Railway.

See also

References

External links

This article is issued from Wikipedia - version of the Sunday, November 08, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.