Dinitrogen trioxide
Names | |
---|---|
Other names
Nitrous anhydride, nitrogen sesquioxide | |
Identifiers | |
10544-73-7 | |
ChEBI | CHEBI:29799 |
ChemSpider | 55446 |
EC Number | 234-128-5 |
Jmol interactive 3D | Image |
PubChem | 61526 |
| |
| |
Properties | |
N2O3 | |
Molar mass | 76.01 g/mol |
Appearance | deep blue liquid |
Density | 1.447 g/cm3, liquid 1.783 g/cm3 (gas) |
Melting point | −100.7[1] °C (−149.3 °F; 172.5 K) |
Boiling point | 3.5 °C (38.3 °F; 276.6 K)(dissociates[1]) |
very soluble | |
Solubility | soluble in ether |
Structure | |
planar, Cs | |
2.122 D | |
Thermochemistry | |
65.3 J/mol K | |
Std molar entropy (S |
314.63 J K−1 mol−1 |
Std enthalpy of formation (ΔfH |
+91.20 kJ/mol |
Hazards | |
EU classification (DSD) |
Highly toxic (T+) |
NFPA 704 | |
Flash point | Non-flammable |
Related compounds | |
Nitrous oxide Nitric oxide Nitrogen dioxide Dinitrogen tetroxide Dinitrogen pentoxide Nitrogen trioxide | |
Related compounds |
Nitrous acid |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
verify (what is ?) | |
Infobox references | |
Dinitrogen trioxide is the chemical compound with the formula N2O3. This deep blue solid[1] is one of the binary nitrogen oxides. It forms upon mixing equal parts of nitric oxide and nitrogen dioxide and cooling the mixture below −21 °C (−6 °F):[2]
- NO + NO2 N2O3
Dinitrogen trioxide is only isolable at low temperatures, i.e. in the liquid and solid phases. At higher temperatures the equilibrium favors the constituent gases, with Kdiss = 193 kPa (25 °C).[3]
Structure and bonding
Typically, N–N bonds are similar in length to that in hydrazine (145 pm). Dinitrogen trioxide, however, has an unusually long N–N bond at 186 pm. Some other nitrogen oxides do also possess long N–N bonds, including dinitrogen tetroxide (175 pm). The N2O3 molecule is planar and exhibits Cs symmetry. The dimensions displayed below come from microwave spectroscopy of low-temperature, gaseous N2O3:[2]
It is the anhydride of the unstable nitrous acid (HNO2), and produces it when mixed into water. An alternative structure might be anticipated for the true anhydride, i.e. O=N–O–N=O, but this isomer is not observed. If the nitrous acid is not then used up quickly, it decomposes into nitric oxide and nitric acid. Nitrite salts are sometimes produced by adding N2O3 to solutions of bases:
- N2O3 + 2 NaOH → 2 NaNO2 + H2O
References
- 1 2 3 Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 444. ISBN 0-08-037941-9.
- 1 2 Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. pp. 521–22. ISBN 0-08-022057-6.
- ↑ Holleman, A. F.; Wiberg, E. (2001), Inorganic Chemistry, San Diego: Academic Press, ISBN 0-12-352651-5
External links
- National Pollutant Inventory - Oxides of nitrogen fact sheet
- Webelements: Compound data - dinitrogen trioxide
- Oxides of nitrogen - synthesis and uses
- Ivtantermo - dinitrogen trioxide table of values