IBM System p

The System p, formerly known as RS/6000, was IBM's RISC/UNIX-based server and workstation product line.

In April 2008, IBM announced a rebranding of the System p and its unification with the System i platform. The resulting product line is called IBM Power Systems.

History

RS/6000 was originally a line of workstations and servers. The server line was then renamed to the eServer pSeries in 2000 as part of its e-Server branding initiative.

In 2004, with the advent of the POWER5 processor, the family was rebranded the eServer p5. In 2005, following IBM's move to streamline its server and storage brands, worldwide, and incorporating the System brand, with the Systems Agenda, the family was renamed yet again as System p5.

The System p5 now encompasses the IBM OpenPower product line. After the introduction of POWER6 processor models, the new models were released under the System p brand, dropping the p (numbered) designation.

Processors

Whereas RS/6000 used a mix of early POWER and PowerPC processors, when pSeries came along this had evolved into RS64-III and POWER3 across the board—POWER3 for its excellent floating-point performance and RS64 for its scalability, throughput, and integer performance.

IBM developed the POWER4 processor to replace both POWER3 and the RS64 line in 2001. After that the differences between throughput and number crunching-optimized systems no longer existed. Since then System p machines evolved to use the POWER5 but also the PowerPC 970 for the low-end and blade systems.

The last System p systems used the POWER6 processor, such as the POWER6-based System p 570 and the JS22 blade. In addition IBM introduced during the SuperComputing 2007 (SC07) conference in Reno a new POWER6-based System p 575 with 32 POWER6 cores at 4.7 GHz and up to 256GB of RAM with water cooling.

Features

All IBM System p5 and IBM eServer p5 machines support DLPAR (Dynamic Logical Partitioning) with Virtual I/O and Micro-partitioning.

System p generally uses the AIX operating system and, more recently, 64-bit versions of the Linux operating system.

Models

BladeCenter

pSeries

The IBM p690 was, at the time of its release in late 2001, the flagship of IBM's high end Unix servers (pSeries) during the POWER4 era of processors. It was built to run IBM AIX Unix, although it is possible to run a version Linux minus some POWER4 specific features. It was discontinued in late 2005.[1]

It can support up to thirty-two 1.50, 1.70 or 1.90 GHz POWER4+ processors and 1 TB of RAM. It weighs well over 1000 kg. It was used in a supercomputer at Forschungszentrum Jülich in 2004.

System p

System p was rebranded Power Systems in 2008.

OpenPower

IntelliStation POWER

BladeCenter

See also

References

This article is based on material taken from the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the "relicensing" terms of the GFDL, version 1.3 or later.

  1. "pSeries 690". IBM. 2005-11-08. Retrieved 2014-02-10.

External links

This article is issued from Wikipedia - version of the Thursday, April 21, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.