Shipbuilding

This article is about the construction of ships. For the song, see Shipbuilding (song).
"Shipwright" redirects here. For other uses, see Shipwright (disambiguation).
Not to be confused with boatbuilding.
An expedition's shipwrights building a brigantine, 1541

Shipbuilding is the construction of ships and other floating vessels. It normally takes place in a specialized facility known as a shipyard. Shipbuilders, also called shipwrights, follow a specialized occupation that traces its roots to before recorded history.

Shipbuilding and ship repairs, both commercial and military, are referred to as "naval engineering". The construction of boats is a similar activity called boat building.

The dismantling of ships is called ship breaking.

History

Prehistory

Archaeological evidence indicates that humans arrived on Borneo at least 120,000 years ago, probably by sea from the Asian mainland during an ice age period when the sea was lower and distances between islands shorter (See History of Borneo and Papua New Guinea). The ancestors of Australian Aborigines and New Guineans also went across the Lombok Strait to Sahul by boat over 50,000 years ago.

4th millennium BC

Evidence from Ancient Egypt shows that the early Egyptians knew how to assemble planks of wood into a ship hull as early as 3000 BC. The Archaeological Institute of America reports[1] that some of the oldest ships yet unearthed are known as the Abydos boats. These are a group of 14 ships discovered in Abydos that were constructed of wooden planks which were "sewn" together. Discovered by Egyptologist David O'Connor of New York University,[2] woven straps were found to have been used to lash the planks together,[1] and reeds or grass stuffed between the planks helped to seal the seams.[1] Because the ships are all buried together and near a mortuary belonging to Pharaoh Khasekhemwy,[2] originally they were all thought to have belonged to him, but one of the 14 ships dates to 3000 BC,[2] and the associated pottery jars buried with the vessels also suggest earlier dating.[2] The ship dating to 3000 BC was about 25 m, 75 feet long[2] and is now thought to perhaps have belonged to an earlier pharaoh.[2] According to professor O'Connor, the 5,000-year-old ship may have even belonged to Pharaoh Aha.[2]

3rd millennium BC

Early Egyptians also knew how to assemble planks of wood with treenails to fasten them together, using pitch for caulking the seams. The "Khufu ship", a 43.6-meter vessel sealed into a pit in the Giza pyramid complex at the foot of the Great Pyramid of Giza in the Fourth Dynasty around 2500 BC, is a full-size surviving example which may have fulfilled the symbolic function of a solar barque. Early Egyptians also knew how to fasten the planks of this ship together with mortise and tenon joints.[1]

The oldest known tidal dock in the world was built around 2500 BC during the Harappan civilisation at Lothal near the present day Mangrol harbour on the Gujarat coast in India. Other ports were probably at Balakot and Dwarka. However, it is probable that many small-scale ports, and not massive ports, were used for the Harappan maritime trade.[3] Ships from the harbour at these ancient port cities established trade with Mesopotamia.[4] Shipbuilding and boatmaking may have been prosperous industries in ancient India.[5] Native labourers may have manufactured the flotilla of boats used by Alexander the Great to navigate across the Hydaspes and even the Indus, under Nearchos.[5] The Indians also exported teak for shipbuilding to ancient Persia.[6] Other references to Indian timber used for shipbuilding is noted in the works of Ibn Jubayr.[6]

2nd millennium BC

The ships of Ancient Egypt's Eighteenth Dynasty were typically about 25 meters (80 ft) in length, and had a single mast, sometimes consisting of two poles lashed together at the top making an "A" shape. They mounted a single square sail on a yard, with an additional spar along the bottom of the sail. These ships could also be oar propelled.[7] The ocean and sea going ships of Ancient Egypt were constructed with cedar wood, most likely hailing from Lebanon.[8]

The ships of Phoenicia seem to have been of a similar design.

1st millennium BC

The naval history of China stems back to the Spring and Autumn Period (722 BC–481 BC) of the ancient Chinese Zhou Dynasty. The Chinese built large rectangular barges known as "castle ships", which were essentially floating fortresses complete with multiple decks with guarded ramparts. There is considerable knowledge regarding shipbuilding and seafaring in the ancient Mediterranean.[9]

Early 1st millennium AD

The ancient Chinese also built ramming vessels as in the Greco-Roman tradition of the trireme, although oar-steered ships in China lost favor very early on since it was in the 1st century China that the stern-mounted rudder was first developed. This was dually met with the introduction of the Han Dynasty junk ship design in the same century.

Archeological investigations done at Portus near Rome have revealed inscriptions indicating the existence of a 'guild of shipbuilders' during the time of Hadrian.[10]

Medieval Europe, Song China, Abbasid Caliphate, Pacific Islanders

A two-masted Chinese junk, from the Tiangong Kaiwu of Song Yingxing, published in 1637

Viking longships were an advancement from the traditional clinker-built hulls of plank boards tied together with leather thongs.[11] Sometime around the 12th century, northern European ships began to be built with a straight sternpost, enabling the mounting of a rudder, which was much more durable than a steering oar held over the side. Development in the Middle Ages favored "round ships", with a broad beam and heavily curved at both ends. Another important ship type was the galley which was constructed with both sails and oars.

An insight into ship building in the North Sea/Baltic areas of the early medieval period was found at Sutton Hoo, England, where a ship was buried with a chieftain. The ship was 26 metres (85 ft) long and, 4.3 metres (14 ft)[12] wide. Upward from the keel, the hull was made by overlapping nine planks on either side with rivets fastening the oaken planks together. It could hold upwards of thirty men.

The first extant treatise on shipbuilding was written c. 1436 by Michael of Rhodes,[13] a man who began his career as an oarsman on a Venetian galley in 1401 and worked his way up into officer positions. He wrote and illustrated a book that contains a treatise on ship building, a treatise on mathematics, much material on astrology, and other materials. His treatise on shipbuilding treats three kinds of galleys and two kinds of round ships.[14]

A 3D model of the basic hull structure of a Venetian "galley of Flanders", a large Mediterranean trading vessel of the 15th century. The reconstruction by archaeologist Courtney Higgins is based on measurements given in contemporary ship treatises, including that of Michael of Rhodes from the 1430s.[15]

Outside Medieval Europe, great advances were being made in shipbuilding. The shipbuilding industry in Imperial China reached its height during the Song Dynasty, Yuan Dynasty, and early Ming Dynasty, building commercial vessels that by the end of this period were to reach a size and sophistication far exceeding that of contemporary Europe. The mainstay of China's merchant and naval fleets was the junk, which had existed for centuries, but it was at this time that the large ships based on this design were built. During the Sung period (960–1279 AD), the establishment of China's first official standing navy in 1132 AD and the enormous increase in maritime trade abroad (from Heian Japan to Fatimid Egypt) allowed the shipbuilding industry in provinces like Fujian to thrive as never before. The largest seaports in the world were in China and included Guangzhou, Quanzhou, and Xiamen.

In the Islamic world, shipbuilding thrived at Basra and Alexandria, the dhow, felucca, baghlah and the sambuk, became symbols of successful maritime trade around the Indian Ocean; from the ports of East Africa to Southeast Asia and the ports of Sindh and Hind (India) during the Abbasid period.

At this time islands spread over vast distances across the Pacific Ocean were being colonised by the Melenesians and Polynesians, who built giant canoes and progressed to great catamarans.

Early Modern

With the development of the carrack, the west moved into a new era of ship construction by building the first regular oceangoing vessels. In a relatively short time, these ships grew to an unprecedented size, complexity and cost.

Shipyards became large industrial complexes and the ships built were financed by consortia of investors. These considerations led to the documentation of design and construction practices in what had previously been a secretive trade run by master shipwrights, and ultimately led to the field of naval architecture, where professional designers and draughtsmen played an increasingly important role.[16] Even so, construction techniques changed only very gradually. The ships of the Napoleonic Wars were still built more or less to the same basic plan as those of the Spanish Armada of two centuries earlier but there had been numerous subtle improvements in ship design and construction throughout this period. For instance, the introduction of tumblehome; adjustments to the shapes of sails and hulls; the introduction of the wheel; the introduction of hardened copper fastenings below the waterline; the introduction of copper sheathing as a deterrent to shipworm and fouling; etc.[17]

Industrial Revolution

Illustration of some shipbuilding methods in England, 1858
Babbitt's rotary engine

The industrial revolution made possible the use of new materials and designs that radically altered shipbuilding. Iron was gradually adopted in ship construction, initially in discrete areas in a wooden hull needing greater strength, (e.g. as deck knees, hanging knees, knee riders and the like). Then, in the form of plates riveted together and made watertight, it was used to form the hull itself. Initially copying wooden construction traditions with a frame over which the hull was fastened, Isambard Kingdom Brunel's Great Britain of 1843 was the first radical new design, being built entirely of wrought iron. Despite her success, and the great savings in cost and space provided by the iron hull, compared to a copper sheathed counterpart, there remained problems with fouling due to the adherence of weeds and barnacles. As a result, composite construction remained the dominant approach where fast ships were required, with wooden timbers laid over an iron frame (the Cutty Sark is a famous example). Later Great Britain's iron hull was sheathed in wood to enable it to carry a copper-based sheathing. Brunel's Great Eastern represented the next great development in shipbuilding. Built in association with John Scott Russell, it used longitudinal stringers for strength, inner and outer hulls, and bulkheads to form multiple watertight compartments. Steel also supplanted wrought iron when it became readily available in the latter half of the 19th century, providing great savings when compared with iron in cost and weight. Wood continued to be favored for the decks.

During World War II, the need for cargo ships was so great that construction time for Liberty Ships went from initially eight months or longer, down to weeks or even days. They employed production line and prefabrication techniques such as those used in shipyards today. The total number of dry-cargo ships built in the United States in a 15-year period just before the war was a grand total of two. During the war, thousands of Liberty Ships and Victory Ships were built, many of them in shipyards that didn't exist before the war. And, they were built by a workforce consisting largely of women and other inexperienced workers who had never seen a ship before (or even the ocean).[18][19][20]

Worldwide shipbuilding industry

MS Oasis of the Seas, the second largest passenger ship in the world, under construction at the Turku shipyard that was taken over by STX Europe, a subsidiary of STX Offshore & Shipbuilding of South Korea.
A TI class supertanker built by Daewoo Shipbuilding & Marine Engineering in Okpo-dong, South Korea.

After the Second World War, shipbuilding (which encompasses the shipyards, the marine equipment manufacturers, and many related service and knowledge providers) grew as an important and strategic industry in a number of countries around the world. This importance stems from:

Historically, the industry has suffered from the absence of global rules and a tendency towards (state-supported) over-investment due to the fact that shipyards offer a wide range of technologies, employ a significant number of workers, and generate income as the shipbuilding market is global.

Shipbuilding is therefore an attractive industry for developing nations. Japan used shipbuilding in the 1950s and 1960s to rebuild its industrial structure; South Korea started to make shipbuilding a strategic industry in the 1970s, and China is now in the process of repeating these models with large state-supported investments in this industry. Conversely, Croatia is privatising its shipbuilding industry.

As a result, the world shipbuilding market suffers from over-capacities, depressed prices (although the industry experienced a price increase in the period 2003–2005 due to strong demand for new ships which was in excess of actual cost increases), low profit margins, trade distortions and widespread subsidisation. All efforts to address the problems in the OECD have so far failed, with the 1994 international shipbuilding agreement never entering into force and the 2003–2005 round of negotiations being paused in September 2005 after no agreement was possible. After numerous efforts to restart the negotiations these were formally terminated in December 2010. The OECD's Council Working Party on Shipbuilding (WP6) will continue its efforts to identify and progressively reduce factors that distort the shipbuilding market.

Where state subsidies have been removed and domestic industrial policies do not provide support in high labor cost countries, shipbuilding has gone into decline. The British shipbuilding industry is a prime example of this with its industries suffering badly from the 1960s. In the early 1970s British yards still had the capacity to build all types and sizes of merchant ships but today they have been reduced to a small number specialising in defence contracts, luxury yachts and repair work. Decline has also occurred in other European countries, although to some extent this has reduced by protective measures and industrial support policies. In the U.S.A, the Jones Act (which places restrictions on the ships that can be used for moving domestic cargoes) has meant that merchant shipbuilding has continued, albeit at a reduced rate, but such protection has failed to penalise shipbuilding inefficiencies. The consequence of this is that contract prices are far higher than those of any other country building oceangoing ships.

Present day shipbuilding

German stamp from 1975 (Deutsche Bundespost Berlin).

Currently, South Korea is the world's largest shipbuilding country with a global market share of 41% in Q1 2015. South Korea leads in the production of large vessels such as cruise liners, super tankers, LNG carriers, drill ships, and large container ships. In the 3rd quarter of 2011, South Korea won all 18 orders for LNG carriers, 3 out of 5 drill ships and 5 out of 7 large container ships.[21] South Korea's shipyards are highly efficient, with the world's largest shipyard in Ulsan operated by Hyundai Heavy Industries slipping a newly built, $80 million vessel into the water every four working days.[22] South Korea's "big three" shipbuilders, Hyundai Heavy Industries, Samsung Heavy Industries, and Daewoo Shipbuilding & Marine Engineering, dominate global shipbuilding, with STX Shipbuilding, Hyundai Samho Heavy Industries, Hanjin Heavy Industries, and Sungdong Shipbuilding & Marine Engineering also ranking among the top ten shipbuilders in the world.[23] In 2007, STX Shipbuilding further strengthened South Korea's leading position in the industry by acquiring Aker Yards, the largest shipbuilding group in Europe. (The former Aker Yards was renamed STX Europe in 2008). In the first half of 2011, South Korean shipbuilders won new orders to build 25 LNG carriers, out of the total 29 orders placed worldwide during the period.[24]

Japan had been the dominant ship building country from the 1960s through to the end of 1990s but gradually lost its competitive advantage to the emerging industry in South Korea which had the advantages of much cheaper wages, strong government backing and a cheaper currency. South Korean production overtook Japan's in 2003 and Japanese market share has since fallen sharply.

China is an emerging low-cost, high-volume shipbuilder that briefly overtook South Korea during the 2008-2010 global financial crisis as they won new orders on medium and small-sized container ships.[25] However, Chinese shipbuilders suffered a severe slump recently due to the flagship bulk ship market deteriorating in 2015. Analysts say that Korea and Japan were able to perform relatively better than China, given the two nations` high-performance ship technology than the latter.[26]

The market share of European ship builders began to decline in the 1960s as they lost work to the Japanese in the same way as Japanese builders have lost work to South Koreans more recently; Europe's production is now a tenth of South Korea's and is primarily military, although cruise liners and some cargo ships are still built in Italy, Finland, France, Germany and Denmark. The largest shares of the European shipbuilding market belong to Germany, Italy, Norway, the Netherlands and Spain, which accounted in 2010 for over 70% of total deliveries by the yards.[27] This activity accounted in 2010 for 1.5% of European GDP.[27] Over the four years from 2007, the total number of employees in the European shipbuilding industry declined from 150,000 to 115,000.[27] The output of the United States also underwent a similar change.[22][28]

World shipbuilding market share by countries (Q1 2015)[26]
Rank Country Compensated GT %
1  South Korea 2,310,000 41.0%
2  Japan 1,620,000 28.9%
3  China 1,350,000 24.0%
Rest of the world 340,000 6.1%

Modern shipbuilding manufacturing techniques

Construction of prefabricated module blocks of HMS Dauntless at BAE's Portsmouth Shipyard.

Modern shipbuilding makes considerable use of prefabricated sections. Entire multi-deck segments of the hull or superstructure will be built elsewhere in the yard, transported to the building dock or slipway, then lifted into place. This is known as "block construction". The most modern shipyards pre-install equipment, pipes, electrical cables, and any other components within the blocks, to minimize the effort needed to assemble or install components deep within the hull once it is welded together.

Ship design work, also called naval architecture, may be conducted using a ship model basin. Previously, loftsmen at the mould lofts of shipyards were responsible for taking the dimensions, and details from drawings and plans and translating this information into templates, battens, ordinates, cutting sketches, profiles, margins and other data.[29] However, since the early 1970s computer-aided design (CAD) became normal for the shipbuilding design and lofting process.[30]

Modern ships, since roughly 1940, have been produced almost exclusively of welded steel. Early welded steel ships used steels with inadequate fracture toughness, which resulted in some ships suffering catastrophic brittle fracture structural cracks (see problems of the Liberty ship). Since roughly 1950, specialized steels such as ABS Steels with good properties for ship construction have been used. Although it is commonly accepted that modern steel has eliminated brittle fracture in ships, some controversy still exists.[31] Brittle fracture of modern vessels continues to occur from time to time because grade A and grade B steel of unknown toughness or fracture appearance transition temperature (FATT) in ships' side shells can be less than adequate for all ambient conditions.[32]

Ship repair industry

River shipyard in Komárno (Slovakia).

All ships need repair work at some point in their working lives. A part of these jobs must be carried out under the supervision of the classification society.

A lot of maintenance is carried out while at sea or in port by ship's crew. However a large number of repair and maintenance works can only be carried out while the ship is out of commercial operation, in a ship repair yard.

Prior to undergoing repairs, a tanker must dock at a deballasting station for completing the tank cleaning operations and pumping ashore its slops (dirty cleaning water and hydrocarbon residues).

See also

References

  1. 1 2 3 4 Ward, Cheryl. "World's Oldest Planked Boats", in Archaeology (Volume 54, Number 3, May/June 2001). Archaeological Institute of America.
  2. 1 2 3 4 5 6 7 Schuster, Angela M.H. "This Old Boat", 11 December 2000. Archaeological Institute of America.
  3. ↑ Possehl, Gregory. Meluhha. in: J. Reade (ed.) The Indian Ocean in Antiquity. London: Kegan Paul Intl. 1996, 133–208
  4. ↑ (e.g. Lal 1997: 182–188)
  5. 1 2 Tripathi, page 145
  6. 1 2 Hourani & Carswel, page 90
  7. ↑ Robert E. Krebs, Carolyn A. Krebs (2003). Groundbreaking Scientific Experiments, Inventions, and Discoveries of the Ancient World. Greenwood PressScience. ISBN 0-313-31342-3.
  8. ↑ Cottrell, Leonard. WarriorPharaohs. London: Evans Brothers Limited, 1968.
  9. ↑ Casson, L. 1994. Ships and Seafaring in ancient times.
  10. ↑ Welsh, J. W. (2011, September 23). huge ancient Roman shipyard unearthed in italy. Livescience. Retrieved from http://www.livescience.com/16201-rome-ancient-shipyard.html
  11. ↑ Zumerchik, John; Danver, Steven Laurence (2010). Seas and Waterways of the World: An Encyclopedia of History, Uses, and Issues. ABC-CLIO. pp. 428–. ISBN 978-1-85109-711-1.
  12. ↑ http://smarthistory.khanacademy.org/sutton-hoo-ship-burial.html
  13. ↑ "Michael of Rhodes: A medieval mariner and his manuscript". Meseo Galileo. Dibner Institute for the History of Science and Technology. 2005. Retrieved 12 December 2010.
  14. ↑ Pamela O. Long, David McGee, and Allan M. Stahl,eds. The Book of Michael of Rhodes: A Fifteenth-Century Maritime Manuscript, 3 vols. (Cambridge, MA: MIT Press, 2009)
  15. ↑ Higgins, Courtney Rosali (2012) The Venetian Galley of Flanders: From Medieval (2-Dimensional) Treatises to 21st Century (3-Dimensional) Model. Master's thesis, Texas A&M University
  16. ↑ Colin Tipping,"Technical Change & the Ship Draughtsman." THE MARINER'S nIRROR 84, No.4, 1998, page 458 foll.
  17. ↑ McCarthy, M., 2005 Ship’s Fastenings: from sewn boat to steamship. Texas A&M Press. College Station. ISBN 1-58544-451-0
  18. ↑ Sawyer, L.A. and Mitchell, W. H. The Liberty Ships: The History of the "Emergency" Type Cargo Ships Constructed in the United States During the Second World War, pp. 7-10, 2nd Edition, Lloyd's of London Press Ltd., London, England, 1985. ISBN 1-85044-049-2.
  19. ↑ Jaffee, Capt. Walter W. The Lane Victory: The Last Victory Ship in War and Peace, pp. 4-9, 15-32, 2nd Edition, Glencannon Press, Palo Alto, California, 1997. ISBN 0-9637586-9-1.
  20. ↑ Herman, Arthur. Freedom's Forge: How American Business Produced Victory in World War II, pp. 135-6, 178-80, Random House, New York, NY, 2012. ISBN 978-1-4000-6964-4.
  21. ↑ Korean: Korea Marine, # 1 four years recaptured, English
  22. 1 2 James Brooke (2005-01096). "Korea reigns in shipbuilding, for now". The New York Times. Retrieved 30 December 2009. Check date values in: |date= (help)
  23. ↑ "7 Korean Shipbuilders Rank in Top 10". Marinetalk.com. 2006-01-03. Retrieved 2010-11-17.
  24. ↑ http://www.hellenicshippingnews.com/index.php?option=com_content&view=article&id=34664:s-korea-overtakes-china-as-worlds-top-shipbuilder-in-h1-&catid=7:shipbuilding-news&Itemid=71 Archived July 30, 2011, at the Wayback Machine.
  25. ↑ http://www.brs-paris.com/annual/annual-2013/pdf/02-newbuilding-a.pdf
  26. 1 2 Korea regains No. 1 spot in shipbuilding orders in Q1
  27. 1 2 3 Zagreb Institute of Public Finance, Newsletter No. 64, December 2011, ISSN 1333-4263
  28. ↑ "기획특집/ 1등 조선.해양 한국에 도전하는 해외 국가별 조선산업 현황: 1)일본, 중국, 인도, 베트남, 브라질, 폴란드, 터키, 독일 조선산업의 현황과 전망/(월간 해양과조선 2008년 11월호)". Shipbuilding.or.kr. Retrieved 2010-11-17.
  29. ↑ The Mould Loft
  30. ↑ CAD-Computer Aided Design
  31. ↑ Drouin, P: "Brittle Fracture in ships - a lingering problem", page 229. Ships and Offshore Structures, Woodhead Publishing, 2006.
  32. ↑ "Marine Investigation Report - Hull Fracture Bulk Carrier Lake Carling". Transportation Safety Board of Canada. 19 March 2002. Retrieved 8 October 2009.
Notes
  • Tripathi, Rama Shankar (1967). History of Ancient India. Motilal Banarsidass. p. 145. ISBN 81-208-0018-4. 
  • Hourani, George Fadlo; Carswel, John (1995). Arab Seafaring: In the Indian Ocean in Ancient and Early Medieval Times. Princeton University Press. p. 90. ISBN 0-691-00032-8. 

External links

Wikidata has a property, P198, for ship builder (see uses)
This article is issued from Wikipedia - version of the Tuesday, April 26, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.