Tabun (nerve agent)

Tabun
Names
IUPAC name
(RS)-Ethyl N,N-Dimethylphosphoramidocyanidate
Other names
GA; Ethyl dimethylphosphoramidocyanidate; Dimethylaminoethoxy-cyanophosphine oxide; Dimethylamidoethoxyphosphoryl cyanide; Ethyl dimethylaminocyanophosphonate; Ethyl ester of dimethylphosphoroamidocyanidic acid; Ethyl phosphorodimethylamidocyanidate; Cyanodimethylaminoethoxyphosphine oxide; Dimethylaminoethodycyanophosphine oxide; EA1205
Identifiers
77-81-6 N
ChEMBL ChEMBL1097650 N
ChemSpider 6254 YesY
Jmol 3D model Interactive image
Properties
C5H11N2O2P
Molar mass 162.13 g·mol−1
Appearance Colorless to brown liquid
Density 1.0887 g/cm3 at 25 °C
1.102 g/cm3 at 20 °C
Melting point −50 °C (−58 °F; 223 K)
Boiling point 247.5 °C (477.5 °F; 520.6 K)
9.8 g/100 g at 25 °C
7.2 g/100 g at 20 °C
Vapor pressure 0.07 mmHg (9 Pa)
Hazards
Main hazards Highly Toxic. Fires involving this chemical may result in the formation of hydrogen cyanide
NFPA 704
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g., diesel fuel Health code 4: Very short exposure could cause death or major residual injury. E.g., VX gas Reactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g., calcium Special hazards (white): no codeNFPA 704 four-colored diamond
2
4
1
Flash point 78 °C (172 °F; 351 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Tabun or GA is an extremely toxic chemical substance. It is a clear, colorless, and tasteless liquid with a faint fruity odor.[1] It is classified as a nerve agent because it fatally interferes with normal functioning of the mammalian nervous system. Its production is strictly controlled and stockpiling outlawed by the Chemical Weapons Convention of 1993. Tabun is the first of the G-series nerve agents along with GB (sarin), GD (soman) and GF (cyclosarin).

Although pure tabun is clear, less-pure tabun may be brown. It is a volatile chemical, although less so than either sarin or soman.[1]

Tabun can be destroyed with bleaching powder, though the poisonous gas cyanogen chloride is produced.[2]

Synthesis

Tabun was made on an industrial scale by Germany during World War II, based on a process developed by Gerhard Schrader. In the chemical agent factory in Dyhernfurth an der Oder, codenamed "Hochwerk", at least 12,000 metric tons of this agent were manufactured between 1942 and 1945. The manufacturing process consisted of two steps, the first being reaction of gaseous dimethylamine (1) with an excess of phosphoryl chloride (2), yielding dimethylamidophosphoric dichloride (3, codenamed "Produkt 39" or "D 4") and dimethylammonium chloride (4). The dimethylamidophosphoric dichloride thus obtained was purified by vacuum distillation and thereafter transferred to the main Tabun production line. Here it was reacted with an excess of sodium cyanide (5), dispersed in dry chlorobenzene, yielding the intermediate dimethylamidophosphoric dicyanide (not depicted in the scheme) and sodium chloride (8); then, absolute ethanol (6) was added, reacting with the dimethylamidophosphoric dicyanide to yield tabun (7) and hydrogen cyanide (9). After the reaction, the mixture (consisting of about 75% chlorobenzene and 25% tabun, along with insoluble salts and the rest of the hydrogen cyanide) was filtered to remove the insoluble salts and vacuum-distilled to remove hydrogen cyanide and excess chlorobenzene, so yielding the technical product, consisting either of 95% tabun with 5% chlorobenzene (Tabun A) or (later in the war) of 80% tabun with 20% chlorobenzene (Tabun B).[3]

Effects of overexposure

The symptoms of exposure include:[2][4][5] nervousness/restlessness, miosis (contraction of the pupil), rhinorrhea (runny nose), excessive salivation, dyspnea (difficulty in breathing due to bronchoconstriction/secretions), sweating, bradycardia (slow heartbeat), loss of consciousness, convulsions, flaccid paralysis, loss of bladder and bowel control, apnea (breathing stopped) and lung blisters. The exact symptoms of overexposure are similar to those created by all nerve agents. Tabun is toxic even in minute doses. The number and severity of symptoms which appear vary according to the amount of the agent absorbed and rate of entry of it into the body. Very small skin dosages sometimes cause local sweating and tremors accompanied with characteristically constricted pupils with few other effects. Tabun is about half as toxic as sarin by inhalation, but in very low concentrations it is more irritating to the eyes than sarin. Also, tabun breaks down slowly, which after repeated exposure can lead to build up in the body.[1]

The effects of tabun appear slowly when tabun is absorbed through the skin rather than inhaled. A victim may absorb a lethal dose quickly, although death may be delayed for one to two hours.[4] A person's clothing can release the toxic chemical for up to 30 minutes after exposure.[1] Inhaled lethal dosages kill in one to ten minutes, and liquid absorbed through the eyes kills almost as fast. However, people who experience mild to moderate exposure to tabun can recover completely, if treated almost as soon as exposure occurs.[1] The LCt50 for tabun is about 400 mg-min/m3.[6]

Treatment for suspected tabun poisoning is often three injections of a nerve agent antidote, such as atropine.[5] Pralidoxime chloride (2-PAM Cl) also works as an antidote; however, it must be administered within minutes to a few hours following exposure to be effective.[7]

History

For more details on this topic, see Nerve agent: History.

Tabun was the first nerve agent known, a property of this chemical discovered by accident in January 1936[1][2][8][9][10] by the German researcher Gerhard Schrader.[10] Schrader was experimenting with a class of compounds called organophosphates, which kill insects by interrupting their nervous systems, to create a more effective insecticide for IG Farben, a German chemical and pharmaceutical industry conglomerate, at Elberfeld. He discovered that tabun, as well as being a potent insecticide, was enormously toxic to humans.

During World War II, as part of the Grün 3 program, a plant for the manufacture of tabun was established at Dyhernfurth[10] (now Brzeg Dolny, Poland), in 1939. Run by Anorgana, GmbH, the plant began production of the substance in 1942.[10] The reason for the delay was the extreme precautions used by the plant.[10] Intermediate products of tabun were corrosive, and had to be contained in quartz or silver-lined vessels. Tabun itself was also highly toxic, and final reactions were conducted behind double glass walls.[10] Large scale manufacturing of the agent resulted in problems with tabun's degradation over time, and only around 12,500 tons of material were manufactured before the plant was seized by the Soviet Army. The plant initially produced shells and aerial bombs using a 95:5 mix of tabun and chlorobenzene, designated "Variant A", and in the latter half of the war switched to "Variant B", an 80:20 mix of tabun and chlorobenzene designed for easier dispersion. The Soviets dismantled the plant and shipped it to Russia.

During the Nuremberg Trials, Albert Speer, Minister of Armaments and War Production for the Third Reich, testified that he had planned to kill Adolf Hitler in early 1945 by introducing tabun into the Führerbunker ventilation shaft.[11] He said his efforts were frustrated by the impracticality of tabun and his lack of ready access to a replacement nerve agent,[11] and also by the unexpected construction of a tall chimney that put the air intake out of reach.

The US once had a tabun production program,[5] which ended many decades ago. Like the other Allied governments, the Soviets soon abandoned GA for GB and GD. Large quantities of the German-manufactured agent were dumped into the sea to neutralize the substance.

Since GA is much easier to produce than the other G-series weapons and the process is comparatively widely understood, countries that develop a nerve agent capability but lack advanced industrial facilities often start by producing GA.

During the Iran–Iraq War, Iraq employed quantities of chemical weapons against Iranian ground forces. Although the most commonly used agents were mustard gas and sarin, tabun and cyclosarin were also used.[5][12]

See also

References

  1. 1 2 3 4 5 6 Facts About Tabun, National Terror Alert Response System
  2. 1 2 3 "Nerve Agent: GA". Cbwinfo.com. Retrieved 2008-11-06.
  3. Lohs, KH: Synthetische Gifte. 3., überarb. u. erg. Aufl., 1967, Deutscher Militärverlag, Berlin (East).
  4. 1 2 "Chemical Warfare Weapons Fact Sheets — Tabun — GA Nerve Agent". Usmilitary.about.com. Retrieved 2008-11-06.
  5. 1 2 3 4 http://www.encyclopedia.com/doc/1G2-3403300733.html
  6. "ATSDR — MMG: Nerve Agents: Tabun (GA); Sarin (GB); Soman (GD); and VX". Atsdr.cdc.gov. Retrieved 2008-11-06.
  7. Emergency Response Safety and Health Database. TABUN (GA): Nerve Agent. National Institute for Occupational Safety and Health. Accessed April 30, 2009.
  8. Chemical Warfare Weapons Fact Sheets, about.com
  9. Chemical Weapons: Nerve Agents, University of Washington
  10. 1 2 3 4 5 6 "A Short History of the Development of Nerve Gases". Noblis.org. Retrieved 2008-11-06.
  11. 1 2 Speer 1970, pp. 430–31.
  12. http://abcnews.go.com/US/story?id=90722&page=1
(Original German edition: Speer, Albert (1969), Erinnerungen [Reminiscences], Berlin and Frankfurt am Main: Propyläen/Ullstein Verlag, OCLC 639475 )

Further reading

This article is issued from Wikipedia - version of the Thursday, April 14, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.