Voyager program

This article is about the space probes launched in 1977. For other uses, see Voyager.
Montage of planets and some moons the two Voyager spacecraft have visited and studied

The Voyager program is a continuing American scientific program that employs two robotic probes, Voyager 1 and Voyager 2, to study the outer Solar System. They were launched in 1977 to take advantage of a favorable alignment of Jupiter, Saturn, Uranus, and Neptune, and are now exploring the outer boundary of the heliosphere. Although their original mission was to study only the planetary systems of Jupiter and Saturn, Voyager 2 continued on to Uranus and Neptune, and both Voyagers are now tasked with exploring interstellar space. Their mission has been extended three times, and both probes continue to collect and relay useful scientific data.

On August 25, 2012, data from Voyager 1 indicated that it had become the first human-made object to enter interstellar space, traveling "further than anyone, or anything, in history".[1] As of 2013, Voyager 1 was moving with a velocity of 17 kilometers per second (11 mi/s) relative to the Sun.[2] Voyager 2 is expected to enter interstellar space by 2016, and its plasma spectrometer should provide the first direct measurements of the density and temperature of the interstellar plasma.[3]

Data and photographs collected by the Voyagers' cameras, magnetometers, and other instruments revealed previously unknown details about each of the giant planets and their moons. Close-up images from the spacecraft charted Jupiter’s complex cloud forms, winds, and storm systems and discovered volcanic activity on its moon Io. Saturn’s rings were found to have enigmatic braids, kinks, and spokes and to be accompanied by a myriad of "ringlets." At Uranus Voyager 2 discovered a substantial magnetic field around the planet and 10 additional moons. Its flyby of Neptune uncovered three complete rings and six hitherto unknown moons as well as a planetary magnetic field and complex, widely distributed auroras. Voyager 2 is still the only spacecraft to have visited the ice giants.

The Voyager spacecraft were built at the Jet Propulsion Laboratory in Southern California, and they were paid for by the National Aeronautics and Space Administration (NASA), which also paid for their launchings from Cape Canaveral, Florida, their tracking, and everything else concerning the space probes.

History

Trajectories and expected location of Pioneer and Voyager spacecraft in April 2007
The trajectories that enabled Voyager spacecraft to visit the outer planets and achieve velocity to escape the Solar System

The two Voyager space probes were originally conceived as part of the Mariner program, and they were thus initially named Mariner 11 and Mariner 12. They were then moved into a separate program named Mariner Jupiter-Saturn, later renamed the Voyager Program because it was thought that the design of the two space probes had progressed sufficiently beyond that of the Mariner family to merit a separate name.[4]

The Voyager Program was similar to the Planetary Grand Tour planned during the late 1960s and early 70s. The Grand Tour would take advantage of an alignment of the outer planets discovered by Gary Flandro, an aerospace engineer at the Jet Propulsion Laboratory. This alignment, which occurs once every 175 years,[5] would occur in the late 1970s and make it possible to use gravitational assists to explore Jupiter, Saturn, Uranus, Neptune, and Pluto. The Planetary Grand Tour was to send several pairs of probes to fly by all the outer planets (including Pluto, then still considered a planet) along various trajectories, including Jupiter-Saturn-Pluto and Jupiter-Uranus-Neptune. Limited funding ended the Grand Tour program, but elements were incorporated into the Voyager Program, which fulfilled many of the flyby objectives of the Grand Tour except a visit to Pluto.

Voyager 2 was the first to launch. Its trajectory was designed to allow flybys of Jupiter, Saturn, Uranus, and Neptune. Voyager 1 was launched after Voyager 2, but along a shorter and faster trajectory that was designed to provide an optimal flyby of Saturn's moon Titan,[6] which was known to be quite large and to possess a dense atmosphere. This encounter sent Voyager 1 out of the plane of the ecliptic, ending its planetary science mission.[7] Had Voyager 1 been unable to perform the Titan flyby, the trajectory of Voyager 2 could have been altered to explore Titan, forgoing any visit to Uranus and Neptune.[8] Voyager 1 was not launched on a trajectory that would have allowed it to continue to Uranus and Neptune, but could have continued from Saturn to Pluto without exploring Titan.[9]

During the 1990s, Voyager 1 overtook the slower deep-space probes Pioneer 10 and Pioneer 11 to become the most distant human made object from Earth, a record that it will keep for the foreseeable future. The New Horizons probe, which had a higher launch velocity than Voyager 1, is traveling more slowly due to the extra speed Voyager 1 gained from its flybys of Jupiter and Saturn. Voyager 1 and Pioneer 10 are the most widely separated human made objects anywhere, since they are traveling in roughly opposite directions from the Solar System.

In December 2004, Voyager 1 crossed the termination shock, where the solar wind is slowed to subsonic speed, and entered the heliosheath, where the solar wind is compressed and made turbulent due to interactions with the interstellar medium. On December 10, 2007, Voyager 2 also reached the termination shock, about 1 billion miles closer to the sun than from where Voyager 1 first crossed it, indicating that the Solar System is asymmetrical.[10]

In 2010 Voyager 1 reported that the outward velocity of the solar wind had dropped to zero, and scientists predicted it was nearing interstellar space.[11] In 2011, data from the Voyagers determined that the heliosheath is not smooth, but filled with giant magnetic bubbles, theorized to form when the magnetic field of the Sun becomes warped at the edge of the Solar System.[12]

On 15 June 2012, scientists at NASA reported that Voyager 1 was very close to entering interstellar space, indicated by a sharp rise in high-energy particles from outside the Solar System.[13][14] In September 2013, NASA announced that Voyager 1 had crossed the heliopause on August 25, 2012, making it the first spacecraft to enter interstellar space.[15][16][17]

As of 2015 Voyager 1 and Voyager 2 continue to monitor conditions in the outer expanses of the Solar System. The Voyager spacecraft are expected to be able to operate science instruments through 2020, when limited power will require instruments to be deactivated one by one. Sometime around 2025, there will no longer be sufficient power to operate any science instruments.[18]

Spacecraft design

A space probe with squat cylindrical body topped by a large parabolic radio antenna dish pointing left, a three-element radioisotope thermoelectric generator on a boom extending down, and scientific instruments on a boom extending up. A disk is fixed to the body facing front left. A long triaxial boom extends down left and two radio antennas extend down left and down right.
Voyager spacecraft structure

The Voyager spacecraft weigh 773 kilograms. Of this, 105 kilograms are scientific instruments.[19] The identical Voyager spacecraft use three-axis-stabilized guidance systems that use gyroscopic and accelerometer inputs to their attitude control computers to point their high-gain antennas towards the Earth and their scientific instruments towards their targets, sometimes with the help of a movable instrument platform for the smaller instruments and the electronic photography system.

The diagram at the right shows the high-gain antenna (HGA) with a 3.7 m diameter dish attached to the hollow decagonal electronics container. There is also a spherical tank that contains the hydrazine monopropellant fuel.

The Voyager Golden Record is attached to one of the bus sides. The angled square panel to the right is the optical calibration target and excess heat radiator. The three radioisotope thermoelectric generators (RTGs) are mounted end-to-end on the lower boom.

The scan platform comprises: the Infrared Interferometer Spectrometer (IRIS) (largest camera at top right); the Ultraviolet Spectrometer (UVS) just above the UVS; the two Imaging Science Subsystem (ISS) vidicon cameras to the left of the UVS; and the Photopolarimeter System (PPS) under the ISS.

Only five investigation teams are still supported, though data is collected for two additional instruments.[20] The Flight Data Subsystem (FDS) and a single eight-track digital tape recorder (DTR) provide the data handling functions.

The FDS configures each instrument and controls instrument operations. It also collects engineering and science data and formats the data for transmission. The DTR is used to record high-rate Plasma Wave Subsystem (PWS) data. The data is played back every six months.

The Imaging Science Subsystem, made up of a wide angle and a narrow angle camera, is a modified version of the slow scan vidicon camera designs that were used in the earlier Mariner flights. The Imaging Science Subsystem consists of two television-type cameras, each with eight filters in a commandable Filter Wheel mounted in front of the vidicons. One has a low resolution 200 mm focal length wide-angle lens with an aperture of f/3 (the wide angle camera), while the other uses a higher resolution 1500 mm narrow-angle f/8.5 lens (the narrow angle camera).

Scientific instruments

Expand
Instrument Name Abr. Description
Imaging Science System
(ISS)
 Utilized a two-camera system (narrow-angle/wide-angle) to provide imagery of Jupiter, Saturn and other objects along the trajectory. More
Filters
Narrow Angle Camera Filters[21]
Name Wavelength Spectrum Sensitivity
Clear
280–640 nm
UV
280–370 nm
Violet
350–450 nm
Blue
430–530 nm
'
'
'
Green
530–640 nm
'
'
'
Orange
590–640 nm
'
'
'
Wide Angle Camera Filters[22]
Name Wavelength Spectrum Sensitivity
Clear
280–640 nm
'
'
'
Violet
350–450 nm
Blue
430–530 nm
CH4-U
536–546 nm
Green
530–640 nm
Na-D
588–590 nm
Orange
590–640 nm
CH4-JST
614–624 nm
Radio Science System
(RSS)
 Utilized the telecommunications system of the Voyager spacecraft to determine the physical properties of planets and satellites (ionospheres, atmospheres, masses, gravity fields, densities) and the amount and size distribution of material in the Saturn rings and the ring dimensions. More
Infrared Interferometer Spectrometer
(IRIS)
 Investigated both global and local energy balance and atmospheric composition. Vertical temperature profiles were also obtained from the planets and satellites, as well as the composition, thermal properties, and size of particles in Saturn's rings. More
Ultraviolet Spectrometer
(UVS)
 Designed to measure atmospheric properties, and to measure radiation. More
Triaxial Fluxgate Magnetometer
(MAG)
 Designed to investigate the magnetic fields of Jupiter and Saturn, the solar-wind interaction with the magnetospheres of these planets, and the interplanetary magnetic field out to the solar wind boundary with the interstellar magnetic field and beyond, if crossed. More
Plasma Spectrometer
(PLS)
 Investigated the macroscopic properties of the plasma ions and measures electrons in the energy range from 5 eV to 1 keV. More
Low Energy Charged Particle Instrument
(LECP)
 Measures the differential in energy fluxes and angular distributions of ions, electrons and the differential in energy ion composition. More
Cosmic Ray System
(CRS)
 Determines the origin and acceleration process, life history, and dynamic contribution of interstellar cosmic rays, the nucleosynthesis of elements in cosmic-ray sources, the behavior of cosmic rays in the interplanetary medium, and the trapped planetary energetic-particle environment. More
Planetary Radio Astronomy Investigation
(PRA)
 Utilized a sweep-frequency radio receiver to study the radio-emission signals from Jupiter and Saturn. More
Photopolarimeter System
(PPS)
 Utilized a 6-inch f/1.4 Dahl-Kirkham-type Cassegrain telescope with an analyzer wheel containing five analyzers of 0,60,120,45 and 135 degrees and filter wheel with eight spectral bands covering 2350 to 7500A to gather information on surface texture and composition of Jupiter, Saturn, Uranus and Neptune and information on atmospheric scattering properties and density for these planets. More
Plasma Wave System
(PWS)
 Provides continuous, sheath-independent measurements of the electron-density profiles at Jupiter and Saturn as well as basic information on local wave-particle interaction, useful in studying the magnetospheres. More

Computers

Unlike the other onboard instruments, the operation of the cameras for visible light is not autonomous, but rather it is controlled by an imaging parameter table contained in one of the on-board digital computers, the Flight Data Subsystem (FDS). More recent space probes, since about 1990, usually have completely autonomous cameras.

The computer command subsystem (CCS) controls the cameras. The CCS contains fixed computer programs such as command decoding, fault detection, and correction routines, antenna pointing routines, and spacecraft sequencing routines. This computer is an improved version of the one that was used in the Viking orbiter.[23] The hardware in both custom-built CCS subsystems in the Voyagers is identical. There is only a minor software modification for one of them that has a scientific subsystem that the other lacks.

The Attitude and Articulation Control Subsystem (AACS) controls the spacecraft orientation (its attitude). It keeps the high-gain antenna pointing towards the Earth, controls attitude changes, and points the scan platform. The custom-built AACS systems on both craft are identical.

It has been erroneously reported [24] on the Internet that the Voyager space probes were controlled by a version of the RCA 1802 (RCA CDP1802 "COSMAC" microprocessor), but such claims are not supported by the primary design documents. The CDP1802 microprocessor was used later in the Galileo space probe, which was designed and built years later. The digital control electronics of the Voyagers were not based on a microprocessor but on a specially designed set of RCA CD4000 radiation-hardened, silicon-on-sapphire (SOS) custom-made integrated circuit chips, combined with standard transistor-transistor logic (TTL) integrated circuits.

Communications

The uplink communications are executed via S-band microwave communications. The downlink communications are carried out by an X-band microwave transmitter on board the spacecraft, with an S-band transmitter as a back-up. All long-range communications to and from the two Voyagers have been carried out using their 3.7-meter high-gain antennas.

Because of the inverse-square law in radio communications, the digital data rates used in the downlinks from the Voyagers have been continually decreasing the farther that they get from the Earth. For example, the data rate used from Jupiter was about 115,000 bits per second. That was halved at the distance of Saturn, and it has gone down continually since then.[25] Some measures were taken on the ground along the way to reduce the effects of the inverse-square law. In between 1982 and 1985, the diameters of the three main parabolic dish antennas of the Deep Space Network was increased from 64 m to 70 m, dramatically increasing their areas for gathering weak microwave signals.

Then between 1986 and 1989, new techniques were brought into play to combine the signals from multiple antennas on the ground into one, more powerful signal, in a kind of an antenna array. This was done at Goldstone, California, Canberra, and Madrid using the additional dish antennas available there. Also, in Australia, the Parkes Radio Telescope was brought into the array in time for the fly-by of Neptune in 1989. In the United States, the Very Large Array in New Mexico was brought into temporary use along with the antennas of the Deep Space Network at Goldstone. Using this new technology of antenna arrays helped to compensate for the immense radio distance from Neptune to the Earth.

Power

Radioisotope thermoelectric generators for the Voyager program

Electrical power is supplied by three MHW-RTG radioisotope thermoelectric generators (RTGs). They are powered by plutonium-238 (distinct from the Pu-239 isotope used in nuclear weapons) and provided approximately 470 W at 30 volts DC when the spacecraft was launched. Plutonium-238 decays with a half-life of 87.74 years,[26] so RTGs using Pu-238 will lose a factor of 1−0.5(1/87.74) = 0.79% of their power output per year.

In 2011, 34 years after launch, such an RTG would inherently produce 470 W × 2−(34/87.74) ≈ 359 W, about 76% of its initial power. Additionally, the thermocouples that convert heat into electricity also degrade, reducing available power below this calculated level.

By 7 October 2011 the power generated by Voyager 1 and Voyager 2 had dropped to 267.9 W and 269.2 W respectively, about 57% of the power at launch. The level of power output was better than pre-launch predictions based on a conservative thermocouple degradation model. As the electrical power decreases, spacecraft loads must be turned off, eliminating some capabilities.

Voyager Interstellar Mission

The Voyager primary mission was completed in 1989, with the close flyby of Neptune by Voyager 2. The Voyager Interstellar Mission (VIM) is a mission extension, which began when the two spacecraft had already been in flight for over 12 years.[27] The Heliophysics Division of the NASA Science Mission Directorate conducted a Heliophysics Senior Review in 2008. The panel found that the VIM "is a mission that is absolutely imperative to continue" and that VIM "funding near the optimal level and increased DSN (Deep Space Network) support is warranted."[28]

As of the present date, the Voyager 2 and Voyager 1 scan platforms, including all of the platform instruments, have been powered down. The ultraviolet spectrometer (UVS)[29] on Voyager 1 was active until 2003, when it too was deactivated. Gyro operations will end in 2016 for Voyager 2 and 2017 for Voyager 1. Gyro operations are used to rotate the probe 360 degrees six times per year to measure the magnetic field of the spacecraft, which is then subtracted from the magnetometer science data.

This diagram about the heliosphere was released on June 28, 2013 and incorporates results from the Voyager spacecraft.[30]
Humanity's Farthest Journey

The two spacecraft continue to operate, with some loss in subsystem redundancy, but retain the capability of returning scientific data from a full complement of Voyager Interstellar Mission (VIM) science instruments.

Both spacecraft also have adequate electrical power and attitude control propellant to continue operating until around 2025, after which there may not be available electrical power to support science instrument operation. At that time, science data return and spacecraft operations will cease.[31]

Telemetry

The telemetry comes to the telemetry modulation unit (TMU) separately as a "low-rate" 40-bit-per-second (bit/s) channel and a "high-rate" channel.

Low rate telemetry is routed through the TMU such that it can only be downlinked as uncoded bits (in other words there is no error correction). At high rate, one of a set of rates between 10 bit/s and 115.2 kbit/s is downlinked as coded symbols.

The TMU encodes the high rate data stream with a convolutional code having constraint length of 7 with a symbol rate equal to twice the bit rate (k=7, r=1/2)

Voyager telemetry operates at these transmission rates:

Note: At 160 and 600 bit/s different data types are interleaved.

The Voyager craft have three different telemetry formats:

High rate

Low rate

It is understood that there is substantial overlap of EL-40 and CR-5T (ISA 35395) telemetry, but the simpler EL-40 data does not have the resolution of the CR-5T telemetry. At least when it comes to representing available electricity to subsystems, EL-40 only transmits in integer increments—so similar behaviors are expected elsewhere.

Memory dumps are available in both engineering formats. These routine diagnostic procedures have detected and corrected intermittent memory bit flip problems, as well as detecting the permanent bit flip problem that caused a two-week data loss event mid-2010.

The cover of the golden record

Voyager Golden Record

Main article: Voyager Golden Record

Both craft carry with them a 12-inch golden phonograph record that contains pictures and sounds of Earth along with symbolic directions on the cover for playing the record and data detailing the location of our planet.[14] The record is intended as a combination of a time capsule and an interstellar message to any civilization, alien or far-future human, that may recover either of the Voyagers. The contents of this record were selected by a committee that included Timothy Ferris[14] and was chaired by Carl Sagan.

Pale blue dot

Seen from 6 billion kilometers (3.7 billion miles), Earth appears as a "pale blue dot" (the blueish-white speck approximately halfway down the brown band to the right).
Main article: Pale Blue Dot

The Voyager program's discoveries during the primary phase of its mission, including never-before-seen close-up color photos of the major planets, were regularly documented by both print and electronic media outlets. Among the best-known of these is an image of the Earth as a pale blue dot, taken in 1990 by Voyager 1, and popularized by Carl Sagan with the quote:

"Consider again that dot. That's here. That's home. That's us. On it everyone you love, everyone you

know, everyone you ever heard of, every human being who ever was, lived out their lives. The aggregate of our joy and suffering, thousands of confident religions, ideologies, and economic doctrines, every hunter and forager, every hero and coward, every creator and destroyer of civilization, every king and peasant, every young couple in love, every mother and father, hopeful child, inventor and explorer, every teacher of morals, every corrupt politician, every "superstar," every "supreme leader," every saint and sinner in the history of our species lived there – on a mote of dust suspended in a sunbeam".

In popular culture

Voyager One, from Space: 1999.

See also

References

  1. ↑ Jpl.Nasa.Gov. "Voyager Enters Interstellar Space - NASA Jet Propulsion Laboratory". Jpl.nasa.gov. Retrieved 2013-09-14.
  2. ↑ "Voyager Mission Operations Status Report # 2013-05-31, Week Ending May 31, 2013". JPL. Retrieved 19 August 2013.
  3. ↑ "At last, Voyager 1 slips into interstellar space – Atom & Cosmos". Science News. 2013-09-12. Retrieved 2013-09-17.
  4. ↑ Chapter 11 "Voyager: The Grand Tour of Big Science" (sec. 268.), by Andrew,J. Butrica, found in From Engineering Science To Big Science ISBN 978-0-16-049640-0 edited by Pamela E. Mack, NASA, 1998
  5. ↑ "Planetary Voyage". USA.gov. 2013-10-30. Archived from the original on 2013-12-09. Retrieved 2014-02-04.
  6. ↑ David W. Swift (1 January 1997). Voyager Tales: Personal Views of the Grand Tour. AIAA. p. 69. ISBN 978-1-56347-252-7.
  7. ↑ "Voyager FAQ". Jet Propulsion Laboratory. Retrieved January 2015.
  8. ↑ Jim Bell (24 February 2015). The Interstellar Age: Inside the Forty-Year Voyager Mission. Penguin Publishing Group. p. 94. ISBN 978-0-698-18615-6.
  9. ↑ "What If Voyager Had Explored Pluto?". Retrieved 4 September 2015.
  10. ↑ Voyager 2 Proves Solar System Is Squashed NASA.gov #2007-12-10
  11. ↑ Brown, Dwayne; Cook, Jia-Rui; Buckley, M. (December 14, 2010). "Nearing Interstellar Space, NASA Probe Sees Solar Wind Decline". Applied Physics Lab, Johns Hopkins University. Retrieved 2011-01-28.
  12. ↑ Smith, Catharine (2011-06-10). "WATCH: NASA Discovers 'Bubbles' At Solar System's Edge". Huffington Post.
  13. ↑ Amos, Jonathan (15 June 2012). "Particles point way for Nasa's Voyager". BBC News. Retrieved 15 June 2012.
  14. 1 2 3 Ferris, Timothy (May 2012). "Timothy Ferris on Voyagers' Never-Ending Journey". Smithsonian Magazine. Retrieved 15 June 2012.
  15. ↑ Cook, Jia-Rui C.; Agle, D. C.; Brown, Dwayne (12 September 2013). "NASA Spacecraft Embarks on Historic Journey Into Interstellar Space". NASA. Retrieved 12 September 2013.
  16. ↑ "Voyager 1 has entered a new region of space, sudden changes in cosmic rays indicate". Retrieved 20 March 2013.
  17. ↑ "Report: NASA Voyager Status Update on Voyager 1 Location". NASA. Retrieved 20 March 2013.
  18. ↑ "Q&A WITH PROJECT SCIENTIST ED STONE ABOUT VOYAGER'S INTERSTELLAR ARRIVAL" (PDF). Jet Propulsion Laboratory. Retrieved January 2015.
  19. ↑ Haynes, Robert. "How We Get Pictures from Space, Revised Edition". NASA facts. NTRS.
  20. ↑ Voyager - Spacecraft Nasa website
  21. ↑ NASA/JPL (2003-08-26). "Voyager 1 Narrow Angle Camera Description". NASA / PDS. Retrieved 2011-01-17.
  22. ↑ NASA/JPL (2003-08-26). "Voyager 1 Wide Angle Camera Description". NASA / PDS. Retrieved 2011-01-17.
  23. ↑ Tomayko, James (April 1987). "Computers in Spaceflight: The NASA Experience". NASA. Retrieved February 6, 2010.
  24. ↑ Johnson, Herb (November 2014). "COSMAC 1802 History in Space". author. Retrieved July 27, 2015.
  25. ↑ Ludwig, Roger; Taylor, Jim (March 2002). "Voyager Telecommunications" (PDF). NASA. Retrieved March 26, 2016.
  26. ↑ The Actinide Research Quarterly: Summer 1997
  27. ↑ "Interstellar Mission". NASA.
  28. ↑ "Senior Review 2008 of the Mission Operations and Data Analysis Program for the Heliophysics Operating Missions" (PDF). NASA. p. 7.
  29. ↑ "Ultraviolet Spectrometer". Voyager: The Interstellar Mission. NASA JPL. Retrieved 2006-06-11.
  30. ↑ NASA - Transitional Regions at the Heliosphere's Outer Limits
  31. ↑ "Voyager – Spacecraft Lifetime NASA website". Retrieved 2011-09-13.

External links

NASA sites

NASA instrument information pages:

Non-NASA sites

This article is issued from Wikipedia - version of the Wednesday, March 30, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.