Yamaha XV1100

Yamaha Virago XV1100
Manufacturer Yamaha Motor Company
Class Cruiser
Engine 1,063 cc (64.9 cu in), air cooled, 2 x SOHC, wet sump
Bore / stroke 95 mm × 75 mm (3.7 in × 3.0 in)
Compression ratio 8.3:1
Power 61.7 hp (46.0 kW) @ 5,600 rpm
Torque 85.3 newton metres (62.9 lbf·ft) @ 3,000 rpm
Ignition type Digital
Transmission 5 speed, wet multi-plate clutch, shaft drive,
Frame type Pressed steel backbone
Suspension Front: telescopic fork, 150 mm (5.9 in) travel
Rear: Swingarm, 97 mm (3.8 in) travel
Brakes Front: Dual 282 mm (11 in) discs
Rear: Drum
Tires Cast 5-spoke aluminium alloy wheels. Front: 100/90-19 57H
Rear: 140/90-15M/C 70H
Rake, trail 32°, 129 mm (5.1 in)
Wheelbase 1,525 mm (60.0 in)
Dimensions L: 2,285 mm (90.0 in)
W: 840 mm (33 in)
H: 1,190 mm (47 in)
Seat height 715 mm (28.1 in)
Weight 221 kg (487 lb) (dry)
n/a (wet)
Fuel capacity 16.8 l (3.7 imp gal; 4.4 US gal)
Related Yamaha DragStar 1100

The Yamaha Virago XV1100 was a motorcycle manufactured by Yamaha Motor Corporation. It was one of several in the Virago line and was positioned as large-size cruiser with an engine displacement of 1,063 cc (64.9 cu in).

It was unique in being one of the few cruiser-style motorcycles available with a shaft drive instead of a chain or belt final drive system, as well as a V-twin engine of that size. Its heavily chromed body styling was also distinctive.

History

The Virago line was born in 1981 with the XV750. In 1982 the larger 920 was introduced alongside the 750, with several more deluxe features. The 920 was redesigned in 1984 and engine size increased to 1,000 cc. In 1986 engine size was again increased to 1,063 cc, resulting in the renamed XV1100.

This model was discontinued in 2000 as the "Star" range of motorcycles took over as the cruiser line from Yamaha. The DragStar 1100 is often seen as the successor to the XV1100.

Starter problems

According to Motorcyclist magazine,[1] the early Virago has a design flaw in the starter system. This magazine states that the starter's defect exists in early Viragos models (1982 and 1983). However, the same flawed starter system was installed in the XV700, which was produced until 1988, and the XV920. The XV1000 had an improved system since it began production in 1984, which doesn't present the flaws. Also the XV1100 and the XV750 (1989 and up) do not present the starter system flaws found in the earlier Viragos. Motorcyclist Magazine[1] suggested welding the ring gear to its backing plate to solve the problem. Other solutions commonly used are the use of shims, which was Yamaha's proposed solution, then also the use of a newly designed idler gear. None of these solutions are considered or proved to be permanent, and applying only one of them will not address other existing flaws in the system; however, great improvements have been reported by Virago owners that have applied them.

See also

References

  1. 1 2 Joe Minton, Motorcyclist/ January 1988, p. 68.
This article is issued from Wikipedia - version of the Wednesday, December 17, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.