British Rail Class D1/1

British Rail Class D1/1
Type and origin
Power type Diesel-mechanical
Builder Hunslet Engine Company
Serial number 4625–4627
Build date 1954–1955
Total produced 3
Specifications
Configuration 0-4-0DM
UIC class B
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Wheel diameter 3 ft 4 in (1.016 m)
Loco weight 22.45 long tons (22.81 t; 25.14 short tons)
Prime mover Gardner 6L3
Transmission Mechanical, Hunslet four-speed gearbox
MU working Not fitted
Train heating None
Train brakes None
Performance figures
Maximum speed 14 mph (23 km/h)
Power output Engine: 153 bhp (114 kW)
Tractive effort 10,800 lbf (48.0 kN)
Career
Operators British Railways
Class DY1; later D1/1; later 1/15. No TOPS class.
Numbers 11500–11502; D2950–D2952 from 1957 to 1958
Axle load class Route availability 1
Retired 1966–1967
Disposition One sold to industry then scrapped, two scrapped

British Rail Class D1/1 (formerly DY1) was a class of locomotive commissioned by British Rail in England. It was a diesel locomotive in the pre-TOPS period built by the Hunslet Engine Company with a 153 horsepower (114 kW) Gardner 6L3 engine.

The design was specifically designed to work dockside tramways and was ordered by the Eastern Region of British Railways to carry out this work. Equipped with a 5 ft 6 in (1.68 m) wheelbase it could work the tight curves and awkward nooks and crannies of East Anglian dock systems.

Early on in their lives the locomotives were initially allocated to Ipswich Engine Shed[1][2] and were fitted with cow catchers for working the dockside tramway lines. As time passed and traffic levels declined at Ipswich, they were transferred away from Ipswich with D2950 being recorded at Great Yarmouth (which had a quayside tramway) and D2951 at Goole which had a dock system. D2950 and D2951 were both transferred from Ipswich to Goole in December 1966.

Withdrawn in 1967 as part of a purge on non standard shunters, D2951 and D2952 were cut up in 1968. D2950 survived in industrial use at Llanelli before being cut up in 1983.[3]

Models

Class D1/1 is being made as a kit and a ready-to-run model in OO gauge by Silver Fox Models.[4]

See also

Notes

  1. Haresnape, Brian (October 1984). British Rail Fleet Survey 7: Diesel Shunters. Shepperton: Ian Allan. p. 44. ISBN 0-7110-1449-3. GE/1084.
  2. "D1/1 0-4-0". BRDatabase.
  3. Butlin, Ashley; Webster, Neil (1993). Locomotive Lexicon. ISBN 0-947773-37-1.
  4. "D2950 Hunslet 0-4-0 Docks Shunter". Retrieved 17 November 2012.

References

This article is issued from Wikipedia - version of the Friday, April 29, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.